used BERGER Staging shelves

approx. 236 fields, frame height: 3m, shelves: 0,80m x 1m, – used - : Construction site price – primarily complete acceptance - : Price for complete acceptance: only 12.500.- € (net) = only 53.-€ / field, dismantled, packed and loaded! Price for partial quantities: Price per field ex location: only 75.- € (net), dismantled, packed and loaded! We reserve the right to take a minimum order! Manufacturer: unknown (probably Bito, Meta, Berger or similar) Type: unknown Year of construction: unknown Frame height: approx. 3m Shelves: 1m wide, 0.80m deep Payload per floor: unknown, but should be at least 150kg / floor 7 soils per field Available: from now on Condition: used (a bit dirty, see photos), not necessarily suitable for goods that are sensitive Location: Gau Bickelheim

approx. 560 pieces shelves for shelves / Berger, type Bert, 1m and 1,30m x 0,50m, 150kg, various - used - : Price per shelf: 9.-€ (net)! Minimum order: 50 pieces Manufacturer: Regalwerk / Berger Type: Bert Year of construction: approx. 2019 Depth: 50cm Width: approx. 1.30m = 540 pieces Width 1m = approx. 20 pieces Height: approx. 4cm Payload: 150kg Per pallet approx. 100 - 120 pieces Condition: good Available: as of now Location. Frankenberg / Saxony

approx. 554 pieces of shelves for shelving / Berger, type Bert, 1m and 1.30m x 0.50m, 150kg, various - used - : Price per shelf: 9.-€ (net)! Minimum order: 50 pieces Manufacturer: Regalwerk / Berger Type: Bert Year of construction: approx. 2019 Depth: 49cm = Field depth: 50cm Width: approx. 1.28m (bay width 1.30m) = 434 pieces Width 1m = approx. 120 pieces Height: approx. 4cm Load capacity: 150kg Per pallet approx. 100 - 120 pieces Condition: good Available: now Location. Frankenberg / Saxony

Fine impactor, opening: approx. 1,000 x 700 mm, with inlet and outlet box, semimobile on steel skids, for soft and medium hard rock, construction year estimated

Manufacturer: BERGER Type: KL-29 Power supply: 230 V / 50 Hz Silvana 4 x 20 W = 80 W Electrical insect gear / insect killer BERGER type KL-29 (2 pieces) Ask for an offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Bia�a USt-IdNr.: PL547-17-47-669 ABC.inter-wiba.com.pl Info@inter-WIBA.com.pl Tel. 0048 33 8125860

With Electrical motor

max. workpiece diameter: 200 mm min. workpiece diameter: 30 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cell Berger with grinding robot Kuka KR 180 (external grinding A1) Grinding cell Berger 2012 (external grinding A1) - Total weight approx. 6300 kg - Dimensions of the cell: approx. 4650 x 2400 x 3100 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of construction 2011 - Control KRC 4 - additional axis (7th axis) Belt grinding station BSS10 belt dimensions 3500 x 30 mm - contact disc diameter 200 mm - Motor power 4 kW 2 x polishing stations, - Polishing disc diameter 350 - 600 mm - Power 5.5 kW Gripper change cabinet Belt conveyorsInteroll Automation GmbH - Total length approx. 2000 mm - Bandwidth approx. 440 mm

Cell Berger with SChleif robot Kuka KR 180 (internal grinding I1) Grinding cell Berger 2012 (internal grinding I1) - Total weight approx. 6200 kg - Dimensions of the cell: approx. 4650 x 2400 x 2900 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of construction 2011 - Control KRC 4 - additional axis (7th axis) 2 x Polishing stations, Polishing disc diameter 350 - 600 mm Polishing disc width 100 mm - Power 5.5 kW

Functioning

Functioning

ROLLER TABLE BLASTING SYSTEM MANUFACTURER: WHEELABRATOR BERGER TYPE: CRC 400X300 Blasting machining of profiles and sheets Manufacturer: Wheelabrator Berger Type: CRC 400x300 Throughput width: 400mm Throughput height: 300mm Centrifugal wheel: 4 pieces x 4 kW frequency controlled Inlet roller conveyor: approx. 6,000mm Discharge roller coaster: approx. 6,000mm Incl. blow-off station, control cabinet, etc. TOP CONDITION ROLLER BLAST MACHINE BRAND : WHEELABRATOR BERGER TYPE: CRC 400X300 Blasting processing of profiles and sheets. Brand: Wheelabrator Berger Type: CRC 400x300 Inlet Width: 400mm Inlet High: 300mm Wheels: 4 x 4,0kW with Drivers Inlet roll table: ca.6.000mm Outlet roll table: approx. 6.000mm Blowstation: YES Incld. Main Panel., Very good condition! Price: Loading on truck .-€ Price: Loading on Truck .-€ Warranty: 6 months f ...

available Cracker Mill Rolls dia 600 x 800mm Description attached!

Manufacturer: Kottmann & Berger Type: BVA 3 Year of construction: 2001 Rated power: 5 kW Pressure: max. 6 bar Bending diameter (steel): 32 mm Bending radius: 1.5 x D – 2.5 x D Machine weight: 0,7 t

Power resistor, wire potentiometer, resistor, braking resistor, tube fixed resistor -Manufacturer: Frizlen, power resistor type RZM20-1K/4.7K -Synchronous motor: Berger Lahr RSM 47/8 -Voltage: 220V 50Hz 375 rpm -Dimensions: 220/110/95 mm -Weight: 0.9 kg

Motor control, controller, converter, stepper drive, stepper motor control, frequency converter -Manufacturer: Berger Lahr, stepper motor control -Type: WPM 311.004-00 -Dimensions: 310/60/H180 mm -Weight: 1.9 kg

Motor control, controller, converter, stepper drive, stepper motor control, frequency converter -Manufacturer: Berger Lahr, stepper motor control -Type: WD5-008.151-00 -Quantity: 2x controllers available -Price per piece -Dimensions: 310/60/H180 mm -Weight: 2.5 kg/pc.

Industrial Robot, Robot, Robotics, Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: Berger Lahr, robotics robot cross table -Servo motors: SER397/4L3SS0TO 3 pieces -Linear units: LM-A504KT100-250 / LM-H404K-700-LW230 / LM-P404KT100-1200 -Individual components: see photos -Traverse paths: x=670 / Y=360 / z= 1260 mm -Total dimensions: 1405/590/H1650 mm -Weight: 74kg

Servo motor, electric motor, DC motor, stepper motor -Manufacturer: Berger Lahr, stepper motor -Type: VRDM 568/50 LWC -Gearbox: PL10 10: 1 -Shaft: Ø 10 x 25 mm -Quantity: 2 motors available -Price per piece -Dimensions: 210/60 / H91 mm -Weight: 1.9 kg

Servo motor, electric motor, DC motor, stepper motor -Manufacturer: Berger Lahr, stepper motor servo motor -Type: RDM 599/50 -Shaft: Ø 10 x 30 mm -Dimensions: 130/85/H85 mm -Weight: 2.5 kg

Berger Lahr Servomotor IFS93/2DP0-DS/3DI-I54/O-001RPP41 4.5Nm 36VDC Imax 5A 14mm shaft. If desired, I can also pull the belt drive from the shaft.

Key data: 600 mm, 1800 mm

Speed: Infinitely variable via new frequency converter Fixed roller: 1 - 14.9 rpm = 2 - 28 m/min Adjustment roller: 1 - 17.5 rpm = 2 - 33 m/min Gap adjustment with manual actuation via worm gear, conversion to electromotive gap adjustment can be offered

approx. 50 fields of general cargo flow rack / delivery rack for boxes or cardboard boxes etc., SSI Shepherd – used – : Price per field ex location: only 350.-€ (net) dismantled, packed and loaded! For complete sale price per field: only 300.-€ (net) dismantled, packed and loaded! Manufacturer: SSI Schäfer Type: Continuous rack DR2 Year of construction: 2002 Storage according to FIFO principle (First In – First Out) maximum compartment load: 240kg at field width: 1.056mm 480kg at field width: 1.944mm maximum field load: 960kg at field width: 1.056mm 1.920kg at field width: 1.944mm 4 levels Dimensions shelf: Depth: approx. 2,90m Height: approx. 2,47m Field width: mainly 1.944mm Field width: (few) 1.056mm Dimensions running level: approx. 2.95m Condition: very good Available: from now on Location: Biebergmünd (Hesse)

We offer metal trays, which are used as subjects in heavy duty and pallet racks. technical data: Width: 890mm Depth: 1120mm Number of sticks: 3 units Capacity: At box 500kg, when setting up a pallet of 1000 kg Weight: 6, 8kg / PCs. Net price: â?¬13 per piece Product available now We have also other Rack Accessories, as well as other racks on sale. Do you need something? Like to take contact with us. On request, we can organise transport. After entering the zip code, we will charge you the delivery cost. To the purchase price, transport costs must be considered. Offer is valid until stocks last. Before you click buy, you record please contact with us, to confirm the availability of the product.

For sale offer you lattice floors. specifications: Width: 890mm Depth: 1120mm Number of stiffeners: 3 pieces Load capacity: 500kg for cartons, 1,000kg for pallets Weight: 7,2kg/pc. Price per piece 18€ net Product immediately available Shipping worldwide Offer is valid until stocks last. If you are interested, please contact us to confirm the availability of the product.