Category: 303 blow moulding machines / Blow moulding machines
Latest update: 15.11.2023 add to watchlist
approved
dealer
item-No.: 158698200
New in: 2003

used

check Seller: BlowMolderSale UG
Location: Land-de

add to watchlist

Single-station machine for containers up to 5 ltr. Extruder 60/24D. ERinfachkopf W. Müller type S1/90. Nozzle up to 90 mm. Prpoprtional control for wagons / shape / calibration. Item removal. Mould dimensions: L 400/450 mm, W 350 mm, D 2 x 130 mm. Mould opening variable. PLC control

Category: 107 sheet metal working
Latest update: 29.03.2024 add to watchlist
item-No.: 163521846
New in: 1999

used

Seller: Exapro
Location: Land-nl

add to watchlist

Capacity 6070 x 6 mm Electric back gauge Elevated table at the rear

Category: 107 sheet metal working / CNC Pressbrakes
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 160302645
New in: 2002

used

check Seller: Heinz Sanders GmbH
Location: 49779 Niederlangen Land-de

add to watchlist

pressure: 200 t chamfer lenght: 4050 mm distance between columns: 3650 mm table width: 190 mm stroke: 250 mm throat: 315 mm rapid traverse: 100 mm/s working feed: 8 mm/sec return speed: 75 mm/sec table height over floor: 800 mm tank capacity: 240 l total power requirement: 18,5 kW weight of the machine ca.: 17 t dimensions of the machine ca.: 4,4 x 1,8 x 3,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 1402 other machines for mechanical handling
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162816994
New in: 1989

used

Location: Land-de
Price: 1.250 € add to watchlist

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Spare part: hydraulic cylinder from a Dorstener BBM press brake type: APE80-3050 -Piston diameter: approx. 150 mm -Piston rod: Ø 140 mm -Stroke: 200 mm -Admission piston rod: mm -Number: 2x cylinders available -Price: per piece -Dimensions: 400/380/H825 mm/piece -Weight: 270 kg/piece

Category: 107 sheet metal working
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162816995
New in: 1989

used

Location: Land-de

add to watchlist

Stop for press brake, edging bench, guillotine shears ... -Spare part: stop bar comes from a Dorstener BBM press brake type: APE80-3050 -Servo motor: manufacturer Stromag -Servo motor: Type: FGP311/005-40AA -Stop ruler: 2630 mm -Length unit approx.: 800 mm -Dimensions 2630/800/H340 mm -Weight 480 kg

Category: 303 blow moulding machines / Blow moulding machines
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163553838
New in: 2013

used

check Seller: Maschinenhandel Kmet
Location: Land-de

add to watchlist

Year of construction: 2013 Hours: 41238 h Tool open max.: 1450mm / with adapter plate: 1230mm Tool closed min.: 830mm / with adapter plate: 610mm Depth clamping plate: 900mm / with adapter plate: 700mm Mold depth max.: ...... / with adapter plate 500mm Height of clamping plate: 100mm / with adapter plate 1230 mm Max. shot weight: 1.5 kg Clamping force: 20 tons. Connected load: 155 KW The machine is suitable to produce technical parts!

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 160453470
New in: 2002

used

Location: Land-de
Price: 1.300 € add to watchlist

Year of construction: 2013 Hours: 41238 h Tool open max.: 1450mm / with adapter plate: 1230mm Tool closed min.: 830mm / with adapter plate: 610mm Depth clamping plate: 900mm / with adapter plate: 700mm Mold depth max.: ...... / with adapter plate 500mm Height of clamping plate: 100mm / with adapter plate 1230 mm Max. shot weight: 1.5 kg Clamping force: 20 tons. Connected load: 155 KW The machine is suitable to produce technical parts!

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162609416
New in: 2004

used

check Seller: Stange Werkzeugmaschinen GmbH & Co. KG
Location: 37235 Hessisch Lichtenau Land-de
Price: 6.500 € add to watchlist

Bending semi-automatic, tube bending machine, mandrel bending machine MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Fabr. No. 056 Year of manufacture 09/2004 - for simultaneous bending of two steel pipe sections up to 12 mm bending angle max. 90 Tube diameter max 12mm Mandrel length approx. 65 mm Nominal power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Mains connection 400 volts, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Control for angle input via STOBER Controlbox Series 4000/5000 - Control SIEMENS S7-200 with display TD200 - Machine without bending tools and without tool bearing bolt 25 x 183 mm - only 1 bending mandrel available (see pictures). Space requirements L x W x H 1000 x 1000 x 1500 mm Weight 390 kg good condition; used

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 160453605
New in: 1985

used

Location: Land-de
Price: 1.000 € add to watchlist

Hand - Swivel bending machine KRAMER type AMS 650 x 1.5 Hand swivel bending machine, bending bench Year of construction approx. 1985 Working length 650 mm Sheet thickness at 40 kg/mm2 1.5 mm Upper cheek opening approx. 60 mm Bending cheek adjustment approx. 0-25 mm Bending angle 0-180- Upper cheek adjustment via hand crank - Pre-screw rail for the bending clamp - one-piece sharpening rail 135 Space requirement L x W x H 1200 x 600 x 1100 mm Weight 160 kg good condition; used

Category: 107 sheet metal working
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162814385

used

Location: Land-de
Price: 1.950 € add to watchlist

Swivel bending machine, cant bench, gutters, roof gutters, beading machine, beading machine, three-roller round, three-roller sheet metal bending machine, bending machine, sheet metal round bending machine, 3-roller round bending machine, profile bending machine, three-roller sheet metal rolling machine -Swivel bending machine: with 3-roller bending machine on a solid base -Max. Working width: 1020 mm -Max. Sheet thickness: 1.5 mm -Roller diameter: 2x 50 mm / 1x 53 mm -Dimensions: 1450/800/H1155 mm -Weight: 346 kg

Category: 107 sheet metal working
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162814612

used

Location: Land-de
Price: 110 € add to watchlist

Bending tool, die, upper knife, upper tool, straight tool, upper beam -Bending tool: for folding machine -Tool angle: 45° -Dimensions: see the drawing in the photos -Dimension: 47 x 11mm -Length: 945mm -Weight: 3.5 kg

Category: 107 sheet metal working
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162815390

used

Location: Land-de
Price: 180 € add to watchlist

Bending tool, matrix, upper knife, upper tool, upper beam -Bending tool: from Lotze HDZ swivel bending machine -Length 2678 mm -Hole spacing: 100mm M10 -Dimensions: see the drawing in the photos -Dimension: 2678/6/H45 mm -Total weight: 5,6 kg

Category: 107 sheet metal working
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162815391

used

Location: Land-de
Price: 240 € add to watchlist

Bending tool, matrix, upper knife, upper tool, upper beam -Bending tool: from Lotze HDZ swivel bending machine -Length 2678 mm -Hole spacing: 100 mm M10 -Dimensions: see the drawing in the photos -Dimension: 2678/15/H57 mm -Total weight: 15.7 kg

Category: 107 sheet metal working
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162815392

used

Location: Land-de
Price: 320 € add to watchlist

Bending tool, die, lower knife, lower tool, lower beam -Bending tool: from Lotze HDZK swivel bending machine -Widening: for lower cheek -Dimensions: 2487 x 100 x 15 mm / 190 x 100 x 15 mm -Hole spacing: 100 x 18 mm -Transport dimension: 2487/100/H30 mm -Total weight: 29.4 kg

Category: 107 sheet metal working
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162816830

used

Location: Land-de
Price: 1.250 € add to watchlist

Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for folding machine RAS Typ 74.30 -Dimensions: see the drawing in the photos -Distance recess rail: center center 650 mm -Dimension: 3060/28/H121 mm -Weight: 65kg

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162972664
New in: 1998

used

check Seller: Stange Werkzeugmaschinen GmbH & Co. KG
Location: 37235 Hessisch Lichtenau Land-de
Price: 7.800 € add to watchlist

Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for folding machine RAS Typ 74.30 -Dimensions: see the drawing in the photos -Distance recess rail: center center 650 mm -Dimension: 3060/28/H121 mm -Weight: 65kg

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163402591
New in: 2014

used

check Seller: Stange Werkzeugmaschinen GmbH & Co. KG
Location: 37235 Hessisch Lichtenau Land-de
Price: 3.000 € add to watchlist

Upper tool - bending tool for die bending machine GEWA Press brake set: 15 pieces Type: GWP-1291 Angle: 88 Radius: 0.8 mm Segment height: 200 mm max. pressure per meter: 85 t/m Total length of the 15 segments: 4010 mm Segment lengths: 6 x 505 mm, 1 x 400 mm, 1 x 190 mm, 1 x 100 mm, 1 x 69 mm, 1 x 58 mm, 1 x 48 mm, 1 x 42 mm, 1 x 40 mm, 1 x 33 mm Total height with tool holder: 230 mm Tool holder: 30 x 13 mm, 8.4 mm groove Weight: 260 kg very good condition Suitable lower tool under stock number 60752. Tool set suitable for AMADA, TRUMPF and LVD press brakes with appropriate tool system; used

Category: 107 sheet metal working
Latest update: 23.10.2023 add to watchlist
approved
dealer
item-No.: 10136672
New in: 1984

used

check Seller: ZOMA Maschinenhandel
Location: Land-de

add to watchlist

THREE ROLL BLECHBIEGEMASCH. m. conical bending and in turn, used three rollers bending m/c with conical and prebending, used Typ / type: UBBDA 32 x 2000 Manufacturer / make: heavy machinery Wildau Baujahr/ new: 1984 Workspace, sheet width max. / maximum working length: 2000-.2100 mm maximum sheet thickness maximum sheet width rounding (cold) / Max sheet thickness at max.working length at bending(cold): 32 mm (270 MPa) On bending (cold) /. at prebending(cold): 23 mm Smallest sheet metal thickness maximum sheet width /. min. sheet thickness at maximum working length: 4 mm Bending rolls / bending rollers: top: 1 piece, bottom: 2 PCs Driven / driven: 2 bottom rollers / bottom rollers upper roll diameter / diameter of top roller: 382 mm Under Roll diameter / diame ...

Category: 107 sheet metal working / 3-Roller Round Bending Machines
Latest update: 05.03.2024 add to watchlist
approved
dealer
item-No.: 12793065

used

check Seller: Kurt Steiger Werkzeugmaschinen GmbH
Location: Land-de

add to watchlist

Working width: 1050 mm sheet thickness: 1.5 mm top rollers Ø: 70 mm bottom rollers Ø: 70 mm weight: 320 kg space requirement: 700 x 1300 x 1100 mm

Category: 107 sheet metal working / Tube Bending Machines
Latest update: 08.01.2024 add to watchlist
approved
dealer
item-No.: 12793111
New in: 1980

used

check Seller: Kurt Steiger Werkzeugmaschinen GmbH
Location: Wiesbaden Land-de

add to watchlist

Max pipe Ø: 60,3 x 3.2 mm maximum bending angle: 180 ° PIN length: 3000 mm Electr. Supply: 380 V, 8.6 kW space: 2400 x 5700 x 1500 mm weight: approx. 2500 kg

Category: 107 sheet metal working / Bending Machines
Latest update: 11.03.2024 add to watchlist
approved
dealer
item-No.: 126884995
New in: 1985

used

check Seller: FORMEX SK s.r.o.
Location: Land-sk
Price: 2.800 € add to watchlist

hydraulic concrete steel Benders Krupp Futura B 703 steel bending machine with accessories and complete instructions Tech. Data performance table - steel 50-55 kp/mm2 Diameter 22 mm - 6 bars per bending, 28 mm-4, 32 mm 3,. Mtfgtw 50 mm 2 speed 4-12 / min Operation - with control or manual, operating dial - HAND - machine with possibility of 3 bending angle set - every page - 3 links + 3 right complete documentation, operating instructions much accessories more info upon request You can edit, flat, round steel accessories - various bending rollers, bolts, reducing roll, Overarm and the machine has device for Pipes. Bulk 2.3 x 1 x 1 m, Btto 1500 kg

Category: 107 sheet metal working / Bending Machines
Latest update: 23.10.2023 add to watchlist
approved
dealer
item-No.: 132261765
New in: 1993

used

check Seller: ZOMA Maschinenhandel
Location: 04838 Eilenburg Sachsen Land-de

add to watchlist

Hydraulic press brake, used Hydraulical press brake, used type / model: D 160-25 Make / make: GWF Year / year of make: 1993 Pressure / force: 160 t Bending length / working length: 3,050 mm Stand width approx. / distance b/n standards: 2.550 mm Table width: 220 mm Stand RADIUS / depth of Cap: 280 mm height / shut height: 440 mm working stroke ca / stroke. Max 250 mm Hubgeschw. / speed of stroke: down: down; 90 mm / s Press down 11 mm / s Expensed. / upward: 90 mm / s Machine weight / weight: approx. 13 t Power consumption / connected load: 22 kW Spec/specif.: 2-hand/foot control / 2 foot switch - manual

Category: 107 sheet metal working / Bending Machines
Latest update: 03.10.2023 add to watchlist
approved
dealer
item-No.: 144831224

used

check Seller: Regalux Krzysztof Sutowski
Location: Land-pl
Price: 20.000 € add to watchlist

For sale we offer a bending machine. It is a Demonstration machine used for prototypes in our production department. Therefore, a few operating hours of approx. 154.1 Bh technical data: Bending force: 40T Bending length: 1600mm Distance between columns: 1200mm Stroke (Y-axis): 150mm Open height: 390mm Table width: 120mm Working speed: 15mm/s Fast speed: 150mm/s Return speed (up): 100mm/s Control axis (8 + 1 axis): Z1,Z2, Z1, Z2, R1, R2+V Power: 5.5 kW Control - Delem-DA-66T (Multilingual) Operating Instructions: English Number of strokes: 10645 Price net: 35.000â?¬ Visit possible by prior arrangement. If you are interested, please contact us.

Category: 107 sheet metal working / Round Bending Machines
Latest update: 09.10.2023 add to watchlist
approved
dealer
item-No.: 16939645

new

check Seller: DutchMach
Location: Land-nl

add to watchlist

SAY MAK ROUND BENDING MACHINE TYPE MSM 2080 x 100 -Walsen Conisch -Bovenrol Wegdraaibare -Remmotor -Voetbediening -Noodstop -Weight 850 kg -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (1 km from the German border)

Category: 107 sheet metal working / Round Bending Machines
Latest update: 09.10.2023 add to watchlist
approved
dealer
item-No.: 16961459
New in: 2021

new

check Seller: DutchMach
Location: Land-nl

add to watchlist

SAY MAK ROUND BENDING MACHINE TYPE SIR 1050 x 75 -Capaciteit 1050 x 2 mm -Walsen Conisch -Bovenrol Wegdraaibare -Remmotor -Voetbediening -Noodstop -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (1 km from the German border)

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
BBM 3rd category level
  • BBM blow moulding machines (2)
  • BBM cnc pressbrakes (1)
 
RESALE used machinery 25 years online