Category: 107 sheet metal working
Latest update: 28.03.2024 add to watchlist
item-No.: 163521846
New in: 1999

used

Seller: Exapro
Location: Land-nl

add to watchlist

Capacity 6070 x 6 mm Electric back gauge Elevated table at the rear

Category: 303 blow moulding machines / Blow moulding machines
Latest update: 15.11.2023 add to watchlist
approved
dealer
item-No.: 158698200
New in: 2003

used

check Seller: BlowMolderSale UG
Location: Land-de

add to watchlist

Single-station machine for containers up to 5 ltr. Extruder 60/24D. ERinfachkopf W. Müller type S1/90. Nozzle up to 90 mm. Prpoprtional control for wagons / shape / calibration. Item removal. Mould dimensions: L 400/450 mm, W 350 mm, D 2 x 130 mm. Mould opening variable. PLC control

Category: 107 sheet metal working / CNC Pressbrakes
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 160302645
New in: 2002

used

check Seller: Heinz Sanders GmbH
Location: 49779 Niederlangen Land-de

add to watchlist

pressure: 200 t chamfer lenght: 4050 mm distance between columns: 3650 mm table width: 190 mm stroke: 250 mm throat: 315 mm rapid traverse: 100 mm/s working feed: 8 mm/sec return speed: 75 mm/sec table height over floor: 800 mm tank capacity: 240 l total power requirement: 18,5 kW weight of the machine ca.: 17 t dimensions of the machine ca.: 4,4 x 1,8 x 3,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 1402 other machines for mechanical handling
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 162816994
New in: 1989

used

Location: Land-de
Price: 1.250 € add to watchlist

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Spare part: hydraulic cylinder from a Dorstener BBM press brake type: APE80-3050 -Piston diameter: approx. 150 mm -Piston rod: Ø 140 mm -Stroke: 200 mm -Admission piston rod: mm -Number: 2x cylinders available -Price: per piece -Dimensions: 400/380/H825 mm/piece -Weight: 270 kg/piece

Category: 107 sheet metal working
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 162816995
New in: 1989

used

Location: Land-de

add to watchlist

Stop for press brake, edging bench, guillotine shears ... -Spare part: stop bar comes from a Dorstener BBM press brake type: APE80-3050 -Servo motor: manufacturer Stromag -Servo motor: Type: FGP311/005-40AA -Stop ruler: 2630 mm -Length unit approx.: 800 mm -Dimensions 2630/800/H340 mm -Weight 480 kg

Category: 303 blow moulding machines / Blow moulding machines
Latest update: 11.03.2024 add to watchlist
approved
dealer
item-No.: 163553838
New in: 2013

used

check Seller: Maschinenhandel Kmet
Location: Land-de

add to watchlist

Year of construction: 2013 Hours: 41238 h Tool open max.: 1450mm / with adapter plate: 1230mm Tool closed min.: 830mm / with adapter plate: 610mm Depth clamping plate: 900mm / with adapter plate: 700mm Mold depth max.: ...... / with adapter plate 500mm Height of clamping plate: 100mm / with adapter plate 1230 mm Max. shot weight: 1.5 kg Clamping force: 20 tons. Connected load: 155 KW

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 160453470
New in: 2002

used

Location: Land-de
Price: 1.300 € add to watchlist

Year of construction: 2013 Hours: 41238 h Tool open max.: 1450mm / with adapter plate: 1230mm Tool closed min.: 830mm / with adapter plate: 610mm Depth clamping plate: 900mm / with adapter plate: 700mm Mold depth max.: ...... / with adapter plate 500mm Height of clamping plate: 100mm / with adapter plate 1230 mm Max. shot weight: 1.5 kg Clamping force: 20 tons. Connected load: 155 KW

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 162609416
New in: 2004

used

check Seller: Stange Werkzeugmaschinen GmbH & Co. KG
Location: 37235 Hessisch Lichtenau Land-de
Price: 6.500 € add to watchlist

Bending semi-automatic, tube bending machine, mandrel bending machine MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Fabr. No. 056 Year of manufacture 09/2004 - for simultaneous bending of two steel pipe sections up to 12 mm bending angle max. 90 Tube diameter max 12mm Mandrel length approx. 65 mm Nominal power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Mains connection 400 volts, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Control for angle input via STOBER Controlbox Series 4000/5000 - Control SIEMENS S7-200 with display TD200 - Machine without bending tools and without tool bearing bolt 25 x 183 mm - only 1 bending mandrel available (see pictures). Space requirements L x W x H 1000 x 1000 x 1500 mm Weight 390 kg good condition; used

Category: 106 presses / CNC Bending Presses
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 135880324
New in: 2006

used

check Seller: MASZYNERIA SP. Z O.O.
Location: Land-pl
Price: 51.670 € add to watchlist

The CNC press brake SMD PBH 110-3100-4C produced in 2006 is offered in a set with the ANTIL TWISTER F5 robot. Technical parameters : - manufacturer: SMD - type: PBH 110-3100-4C - year of production: 2006 - control: CNC CYBELEC ModEva 10 - overworked time: about 20,000 man-hours - pressure force: 110 tons - bending width: 3100 mm - maximum working speed: 10 mm / s - table width: 60 mm - table height: 960 mm - stroke: 465 mm - frame spacing: 2600 mm - throat: 410 mm - power supply: electric - 11.5 KW, 400 V three phases - oil tank capacity: 250 l - dimensions of the press: 3960 × 2045 × 3650 mm - total weight: 9500 kg Processing on a 3 m table and palletizing of finished details on 3 europallets.

Category: 106 presses / CNC Bending Presses
Latest update: 16.11.2022 add to watchlist
approved
dealer
item-No.: 158072186
New in: 2007

used

check Seller: AWM - SERWIS JERZY GUZOWSKI
Location: Land-pl

add to watchlist

Press force: 130T Stroke: 350 mm 4 axis Weight:8860 kg

Category: 106 presses / CNC Bending Presses
Latest update: 11.03.2024 add to watchlist
approved
dealer
item-No.: 160991016
New in: 1988

used

check Seller: DenTool LTD
Location: 0 Naestved Land-dk

add to watchlist

Stock number: 3768 CNC PRESS BRAKE Manufacturer: DONEWELL, Type: 100 x 3000 Machine NO.: 588 12 2348, Year of construction: 1988 Specifications: Size bending length 3100 mm Size Printing capacity 100 tons Stroke length 215 mm Stand passage 2600 mm Projection 265 mm Bending speed 420 mm/min Hydraulic. CNC control Cybelec EURO III Fabr. Controlled in Y1-Y2-X Achen Program-controlled backgauge. X - 500 mm Accessories: Segment-split upper tool 3100 mm Multi bottom tool 3100 mm Operating manuals Length: 1300 mm, Height: 2450 mm, Width: 3100 mm, Weight: 7000 kg

Category: 106 presses / CNC Bending Presses
Latest update: 11.01.2024 add to watchlist
approved
dealer
item-No.: 163127090
New in: 1998

used

check Seller: Osterer Werkzeugmaschínen
Location: 4853 Steinbach am Attersee Land-at

add to watchlist

Key data: 170 t, 4000 mm

Trumpf Press Brake Trumabend V170, 1700KN, stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,

Category: 106 presses / CNC Bending Presses
Latest update: 14.02.2024 add to watchlist
approved
dealer
item-No.: 163361486
New in: 2018

used

check Seller: METEC GmbH
Location: Deutschland Land-de

add to watchlist

Key data: 642 t

CNC Press Brake Manufacturer: SMD Yawei Type: PBB-630/6200 Year of construction: 2018 CNC control: CYBELEC ModEva 15 Pressure: 6,300 kN Working width approx. 6,200 mm DSP-Laser-TX Connected load: 400 V / 95 kVA

Category: 106 presses / Bending Presses
Latest update: 09.09.2023 add to watchlist
approved
dealer
item-No.: 97135923

new

check Seller: DutchMach
Location: Land-nl

add to watchlist

AYEL-TECH PRESS BRAKE/WORKSHOP PRESS KBWP type 1050 x 100 ton -Capaciteit 1050 x 100 ton -Max Queen 1050 mm -Geeredschap -Pressure gauge -Noodstop -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Category: 106 presses / Bending Presses
Latest update: 26.09.2023 add to watchlist
approved
dealer
item-No.: 123817235
New in: 2001

used

check Seller: Schrenk Werkzeugmaschinen
Location: Land-de

add to watchlist

To force 80 Bending length 2100 mm with 3-point bending system . Installation height 782 mm Working stroke 265 mm . Rapid traverse 150 mm Step 10 mm Power 13 kW To machine weight 7,8 . with -3-point bending system -hydraulic tool clamping -sliding conditions -SICK photoelectric -6-axes stop system -many tools . ..... Control repair needed! Details on sale!

Category: 106 presses / Bending Presses
Latest update: 09.10.2023 add to watchlist
approved
dealer
item-No.: 127464923

new

check Seller: DutchMach
Location: 7544c Enschede, ypelobrink 96 Land-nl

add to watchlist

UWM PRESS BRAKE/WORKSHOP PRESS TYPE UWM 100 -Capaciteit 100 ton -Max druk pomp 32 MPA -Werkslag 220 mm -Max hoogte 680 mm -Max Queen 1000 mm -Panel afmeting 500 x 1000 mm -Afmetingen 1500 x 700 x 1820 mm -Weight 1200 kg -Motor 3 KW/400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Category: 106 presses / Bending Presses
Latest update: 09.10.2023 add to watchlist
approved
dealer
item-No.: 136510158
New in: 2016

used

check Seller: DutchMach
Location: Enschede Land-nl

add to watchlist

DA ABKANTPRESSE TYP 1600 x 30 Sound -Capaciteit 1600 x 30 sound -Estun E21 besturing -2 hydraulic cilinders -Voetbediening -Fotocelbeveiliging -Noodstop -Documentatie -400V DUTCHMACH Metal processing machines ENSCHEDE-NIEDERLANDE (3 km from the German border)

Category: 106 presses / Bending Presses
Latest update: 09.10.2023 add to watchlist
approved
dealer
item-No.: 136766512

used

check Seller: DutchMach
Location: Enschede Land-nl

add to watchlist

TTMC ABKANTPRESSE TYP 1300 x 30 Sound -Capaciteit 1300 x 30 sound -Estun E21 besturing -2 hydraulic cilinders -Voetbediening -Fotocelbeveiliging -Noodstop -Documentatie -400V DUTCHMACH Metal processing machines ENSCHEDE-NIEDERLANDE (3 km from the German border)

Category: 106 presses / Bending Presses
Latest update: 23.02.2021 add to watchlist
approved
dealer
item-No.: 147245767

used

check Seller: TDMW.PL Igor Kaliniec
Location: Land-pl

add to watchlist

Press brake AMADA HFE 220-3 Number of controlled axes / CNC controlled axis: 7 Condition good, ready to use, visit under electricity possible / Condition: good, in use, can be seen under power in Poland Pressure / Pressure: 2200 kN / 220 ton Bending length / working range: 3100 mm Distance between stands / distance between columns: 2700 mm Stroke / stroke: 200 mm Delivery speed / downwards speed: 1-100 mm/s Working speed / working speed: 1-10 mm/s Retraction speed / backwards speed: 1-100 mm/s Dimensions Machine / Machine's dimensions: 4.3 x 2.3 x 3.1 m Weight / Weight: 14 ton Machine has: new safety cards from Pilz, new tool clips, new keyboard of control, new stop finger Machine has: new safety cards by Pilz, new tool clamps, new CNC cover, new back gauge fingers

Category: 106 presses / Bending Presses
Latest update: 16.01.2024 add to watchlist
approved
dealer
item-No.: 151611013
New in: 1966

used

check Seller: Brand GmbH
Location: 01587 Riesa Land-de

add to watchlist

Press brake edge machine edge bench press used Manufacturer: Mengele Type: C320-4B Built: 1966 last revision and repair: 2000 Location D-01587 Riesa Dimensions WxH: 6,250 x 3,650 mm Edge knife width: 6,150 mm sheet thickness at 6,000 mm bending length: approx. 7.5 mm. The machines are designed for very deep shaft bends, therefore very deep cheek recesses. Original 300 t pressing force - In 1989 the pressing force was increased to 350 t. The press is in very good condition despite its age. The machine is disassembled and ready for loading. documentation for the machine is available. Weight: about 45 t

Category: 106 presses
Latest update: 13.03.2024 add to watchlist
item-No.: 163568415
New in: 2003

used

Seller: Maquinaria Colas S.L.
Location: 50720 ZARAGOZA Land-es

add to watchlist

Manufacturer LOIRE SAFE Model ESSC 300/ 30-20 / 20-15 Year 2003 Press Maximum adjustable force 300 a 3.000 kN Return force 600 kN Max opening between fixed table and chuck 2.000 mm. Mobile chuck travel 1.500 mm. Dimensions of the lower mobile table Fontal 3.000 mm. Lateral 2.000 mm. Dimensions of the mobile chuck Frontal 3.000 mm. Lateral 2.000 mm. Machine weight without tools or accessories 63.000 kg. Speeds Approaching speed, without pressure 60 mm/s Working speed, adjustable by potentiometer 1 a 7 mm/s Demoulding speed, adjustable by potentiometer 1 a 35 mm/s Return speed 60 mm/s Tooling Dimensions Frontal 3.000 mm. Lateral 2.000 mm. Height 1.500 mm. Max weight Mobile part 18.000 kg Total 42.000 kg Accessories Upper plate with tilt system INCLUDED Movable lower table with tilt system INCLUDED Stop time and safety distance Stop time 123 ms Safety  ...

Category: 106 presses / Straight-Bending Presses
Latest update: 21.12.2022 add to watchlist
approved
dealer
item-No.: 158621422
New in: 2021

used

check Seller: Hidrobrasil GmbH
Location: 45892 Gelsenkirchen Land-de

add to watchlist

Portal straightening press with 400 T capacity Oil-hydraulic double column press a) No-load and pressing speed up to 17 mm/sec b) Opening speed up to 60 mm/sec c) Table size 6000x3000mm d) Open height 1500 mm e) Total size approx. LBH 6000 x 5000 x 4500 mm f) OIL temperature display on the tank g) Lubrication via lubrication nipples h) table in grid construction, i) Operation on swivel arm, mounted on the bridge j) Pressure setting from 60 T to 400 T via MONITOR k) Bridge moves through two geared motors, over racks l) Cylinder moves to the left and right over racks m) Machine body powder-coated, or double-painted n) T-grooves according to customer requirements o) Cylinder induction hardened PORTAL PRESS Thermally neutral 80 – 120 °C Number of operating pages 3 pages Forces Pressing force max. 4000 kN Free tearing force ...

Category: 106 presses / Straight-Bending Presses
Latest update: 21.12.2022 add to watchlist
approved
dealer
item-No.: 158787419
New in: 2022

used

check Seller: Hidrobrasil GmbH
Location: 45892 Gelsenkirchen Land-de

add to watchlist

Portal straightening press with 300 T capacity a) No-load and pressing speed up to 17 mm/sec b) Opening speed up to 55 mm/sec c) Table size 2500x1600mm d) Open height 700 mm e) Total size approx. LBH 4500 x 2300 x 3700 mm f) OIL temperature display on the tank g) Lubrication via lubrication nipples h) Table in grid construction, with T grooves according to customer requirements, otherwise 22mm i) Operation on swivel arm, mounted on the bridge j) Pressure setting from 50 T to 300 Tvia MONITOR k) Bridge moves through two geared motors, over racks l) Cylinder moves to the left and right over racks m) Machine body double painted n) Cylinder induction hardened Design Press type PORTALPRESSE Thermally neutral 80 – 120 °C Number of operating pages 3 pages Forces Pressing force max. 3,000 kN Free tearing force max. 500 kN Pressure build-up time Closed tool St ...

Category: 106 presses / Straight-Bending Presses
Latest update: 22.01.2024 add to watchlist
approved
dealer
item-No.: 159362762
New in: 1977

used

check Seller: Kurt Steiger Werkzeugmaschinen GmbH
Location: 65197 Wiesbaden Land-de

add to watchlist

Conductive force: 63 t Projection: 280 mm Table size: 500 x 600 mm Installation height: without straightening bridge 600 mm stroke: 160 mm Tappet speed upwards: 117 mm/s m/min Rotary speed downwards: 42 mm/s m/min Space requirement: 1600 x 700 x 2400 mm Weight: 3900 kg

Category: 106 presses / Bending Presses
Latest update: 27.03.2024 add to watchlist
item-No.: 159575111
New in: 1998

used

Location: Land-cz

add to watchlist

Control Amada Pressing force ... 100t Bending length... 3000mm controlled axes ... 7 Drive... Hydraulic The machine is in good condition, possible to test under power.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
RESALE used machinery 25 years online