british flag
Resale Logo

BAC used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information used machinery dealer  Brand GmbH  http://gebraucht-maschinen-handel.de 
banner logo
start page > keywords BAC > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
124970756 106

SCHULER SH 110-4,5x2,5 for sale
Hydraulic Presses


Total press weight: 162500 KG Nominal force: 1000 kN Maximum stroke length: 1350 mm Mounting height: 2500 mm Shutter speed: 144 mm / s Max. operating speed: 68 mm / s Operating speed at nominal force: 31 mm / s Ma ...
used machine
 
Total press weight: 162500 KG
Nominal force: 1000 kN
Maximum stroke length: 1350 mm
Mounting height: 2500 mm
Shutter speed: 144 mm / s
Max. operating speed: 68 mm / s
Operating speed at nominal force: 31 mm / s
Max. Tool base WxH: 4400 x 2300 mm
With a nominal force WxH: 1600x850 mm
Min. Tool height: 1150 mm
Max. total tool weight: 60,000 kg
Max. Upper tool weight: 30,000 kg
Permissible eccentric left-right hitch: 1500 kNm
Available eccentric front-to-back load: 800 kNm
Installed power: 110 kW
Rated current: 275
Voltage: 400 V
Frequency: 50 Hz
Operating Hydraulic Pressure: 280 bar
Total oil volume: 1980 l
2004
Price  
  AT   request
124965323 106

SCHNUPP for sale
Spotting Press


pressure: 500 ttable length: 2500 mmtable width: 5000 mm--------------------------------------------------: PRESS DESIGN: - drive system: hydraulic: PRESS FORCES: - total force (nominal): 500 toPRESS  ...
used machine
 
pressure: 500 t
table length: 2500 mm
table width: 5000 mm
--------------------------------------------------:
PRESS DESIGN:
- drive system: hydraulic:
PRESS FORCES:
- total force (nominal): 500 to
PRESS TABLE:
- table surface (left-right): 5000 mm
- table surface (front-back): 2500 mm
SLIDE:
- table surface (left-right): 5000 mm
- table surface (front-back): 2500 mm
- stroke: 2000 mm
SLIDE (HYDR. PRESS):
- working velocity min.: 10 mm/s
- working velocity max.: 100 mm/s
TOOL ASSEMBLY DIMENSIONS:
- shut height (stroke down, adjustment up), BDC: 1500 mm
- distance table - slide max.: 2000 mm
ELECTRICAL SPECIFICATIONS:
- mains power supply: 300 kVA
DIMENSIONS / WEIGHTS:
- space requirements -left/right-: 10000 mm
- space requirements -front/back-: 8000 mm
- height above floor level: 6000 mm
- total weight approx.: 200000 kg
ATTACHMENTS (PRESSES):
- moving bolster design: front:
- acc. to actual accident protection regulation: y:
- European CE standards: yes:



This ad was created with MODUL MWS - the software solution of LogoTech.
2011
Price  
    request
124970695 1101

DEUTZ MWM TCG2020 12V for sale
Gas generators


NATURAL GAS GENERATOR MWM, TYPE TCG2020-12V. -MAKE: MWM -YEAR: 2008 -OPERATING HOURS: 53.120 H -ELECTRICAL EFFICIENCY: 41%. -ALTERNATOR: 400VOLT -FREQUENCY: 50 Hz. -RATING: 1. 450kVa. (1.160Kwe) -SPEED: 1.50 ...
used machine
 
NATURAL GAS GENERATOR MWM, TYPE TCG2020-12V.

-MAKE: MWM
-YEAR: 2008
-OPERATING HOURS: 53.120 H
-ELECTRICAL EFFICIENCY: 41%.
-ALTERNATOR: 400VOLT
-FREQUENCY: 50 Hz.
-RATING: 1. 450kVa. (1.160Kwe)
-SPEED: 1.500RPM.
-FULLY SERVICED BY MWM DEALER.
-USE OF FUEL: NATURAL GAS.
-ACCESSORIES: GASTRAIN, HEAT EXCHANGER, EXHAUST GASCOOLER, HEATING PUMPS, 3-WAY
VALVES, ELECTRIC MOTORHEATING, MWM CONTROLPANEL, TEM PANEL, BREATHER
FILTERS, VIBRATION ABSORBER AND LOGBOOKS.

We usually have ready in stock of used gas Gen-set brands (Cummins, Perkins, Caterpillar, Waukesha, Deutz MWM, MTU, Jenbacher), etc... 800Kwe current range up to 3,000 Kwe, as a research most welcome to contact US.
2008
Price  
    request
124965325 101

SUPER MAX YCM - FV85A for sale
Machining Center - Vertical


x travel: 850 mmy travel: 520 mmz travel: 540 mm--------------------------------------------------: WORKING RANGE -CUBIC-: - number of processing axes (excl parallel axes): 3 - X-axis travel: 850 mm-  ...
used machine
 
x travel: 850 mm
y travel: 520 mm
z travel: 540 mm
--------------------------------------------------:
WORKING RANGE -CUBIC-:
- number of processing axes (excl parallel axes): 3
- X-axis travel: 850 mm
- Y-axis travel: 520 mm
- Z-axis travel: 540 mm
MILLING SPINDLE / HEAD:
- spindle revolutions (max): 8000 /min
- tool fixture: ISO BT 40:
AXIS DRIVES:
- rapid traverse: 24000 mm/min
TOOL MAGAZINE:
- number of positions: 24
ELECTRICAL SPECIFICATIONS:
- mains voltage: 400 V
- mains frequency: 50 Hz
DIMENSIONS / WEIGHTS:
- space requirements -left/right-: 2760 mm
- space requirements -front/back-: 2820 mm
- total height: 2920 mm
- total weight approx.: 5200 kg



This ad was created with MODUL MWS - the software solution of LogoTech.
2000
Price  
    request
124945961 107

GEKA DT 150 for sale
pneumatic plate shear


Max. sheet width 1500 mm max. sheet thickness 2 mm Cut number about 15 strokes / min. Weight 430 kg required air pressure 8 bar Manual back gauge 600 mm mechanical hold-down device Maintenance unit
used machine
 
Max. sheet width 1500 mm
max. sheet thickness 2 mm
Cut number about 15 strokes / min.
Weight 430 kg
required air pressure 8 bar

Manual back gauge 600 mm
mechanical hold-down device
Maintenance unit
1994
Price  
    request
124965327 109

ELMASS P20-250 for sale
Broaching Machine-Internal - Vertical


pulling force max: tmax ram stroke: mmmax workpiece diameter: mm--------------------------------------------------: ELECTRICAL SPECIFICATIONS: - mains voltage: 400 V- mains frequency: 50 HzDIMENSIONS / WE ...
used machine
 
pulling force max: t
max ram stroke: mm
max workpiece diameter: mm
--------------------------------------------------:
ELECTRICAL SPECIFICATIONS:
- mains voltage: 400 V
- mains frequency: 50 Hz
DIMENSIONS / WEIGHTS:
- space requirements -left/right-: 1000 mm
- space requirements -front/back-: 1200 mm
- total height: 2450 mm
- total weight approx.: 1000 kg



This ad was created with MODUL MWS - the software solution of LogoTech.
2009
Price  
    request
124945943 702

WP Matador Store 6.4 for sale
Multideck ovens


It is a used WP floor oven to sell Matador Store 6.4 with steaming. The oven is fully functional and in top condition. With new, analog control panel. -Exterior dimensions: Width: 0, 95m, depth (with hood): 1, 45 m, h ...
used machine
 
It is a used WP floor oven to sell Matador Store 6.4 with steaming.
The oven is fully functional and in top condition. With new, analog control panel.
-Exterior dimensions: Width: 0, 95m, depth (with hood): 1, 45 m, height (with hood): 2, 11 m
-Baking surface: 60 cm x 40 cm
-3 x floors
-Mobile stand with shelves

-Now available -.
 
4,400 €  
    request
124965256 107

ERMAK POWER BEND FALCON 12.40 for sale
Hydr. pressbrake


pressure: 40 tchamfer lenght: 1270 mmdistance between columns: 1050 mmcolumn arm: 350 mmdayligth: 387 mmmax. ram stroke: 170 mmfeed down: 140 mm/secfeed up: 170 mm/secpressing speed: 17 mm/secmain drive: 5,5 kWtable heig ...

 
pressure: 40 t
chamfer lenght: 1270 mm
distance between columns: 1050 mm
column arm: 350 mm
dayligth: 387 mm
max. ram stroke: 170 mm
feed down: 140 mm/sec
feed up: 170 mm/sec
pressing speed: 17 mm/sec
main drive: 5,5 kW
table height: 850 mm
back stop - adjustable: 800 mm
adjustment speed: 230 mm/min
total power requirement: 5,5 kW
weight of the machine ca.: 3,22 To.
dimensions of the machine ca.: 2,15 x 2,3 x 1,65 m
2D graphic CNC-control CYBELEC DNC 600 S (axis Y1+Y2, X)
back stop adjustment by ball screw spindles X-axis (CNC)
stop finger height adjustment R-axis (manuel)
stop finger longitudinal adjustment Z-axis (manuel)
AKAS - laser-safety system manufacture FIESSLER
quick clamping of upper tools
upper tool - goats foot die (hardend) ROLLERI P 97 / 85° / R 0,8
universal die block with 4 V-openings 16/22/35/50 mm (hardend) ROLLERI M 460 R
SICK light barrier behind the machine
movable double foot switch
protective cover for both cylinders
2 in front and over the whole length easy movable bearing consols
with quick clamping - even adjustable in height
SIEMENS - electro device
BOSCH/HOERBIGER hydraulic device
CE-conformity declaration
12 month guarantee
oil fill (if desired): Euro 500,--
instruction/start-up locally (if desired) Euro 850,--

Machine inspectable under power at our showroom.


This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
124930131 101

MIKRON HSM 400 U for sale
CNC5-Axis High Speed Universal Machining Center


5-Axis -High speed Table size diameter Ø 156 mm. X-axis travel (column right / left movement) 400 mm. Y-axis travel (column back/forth movement) 240 mm. Z-axis travel (spindle up / down movement) 350 mm. Spind ...
used machine
 
5-Axis -High speed
Table size diameter Ø 156 mm.
X-axis travel (column right / left movement) 400 mm.
Y-axis travel (column back/forth movement) 240 mm.
Z-axis travel (spindle up / down movement) 350 mm.
Spindle taper HSK E 40.
Max. / min. spindle speed 100-42.000 1/min.
Number of tools in magazine 68 pieces.
CNC Control CNC Heidenhain iTNC 530
2005
Price  
  NL   request
124965272 107

FASTI TCHE 509-20/4 for sale
Plate Shear - Hydraulic


sheet width: 2035 mmplate thickness: 4,0 mmback stop - adjustable: 1.000 mmno. of strokes: 26 - 55 Hub/mincutting angle: 1,5 °column arm: 50,0 mmtotal power requirement: 8,5 kWweight of the machine ca.: 3,0 tdimensions  ...
used machine
 
sheet width: 2035 mm
plate thickness: 4,0 mm
back stop - adjustable: 1.000 mm
no. of strokes: 26 - 55 Hub/min
cutting angle: 1,5 °
column arm: 50,0 mm
total power requirement: 8,5 kW
weight of the machine ca.: 3,0 t
dimensions of the machine ca.: 2,28 x 1,4 x 1,6 mtr.



This ad was created with MODUL MWS - the software solution of LogoTech.
1995
Price  
    request
124930126 1101

JENBACHER J 616 GSE for sale
Gas generators


AVAILABLE FOR SALE! USED GAS GENERATOR SET. MAKE: Jenbacher TYPE: J 616 GSE POWER RATING: 2495 KW YEAR: 2006 HOURS: 41000 OVERHAULED BY 30K. ALTERNATOR: STAMFORD, 400V, 50HZ, 1500 RPM, 3555 KVA SCOPE OF DELIVERY ...
used machine
 
AVAILABLE FOR SALE! USED GAS GENERATOR SET.
MAKE: Jenbacher
TYPE: J 616 GSE
POWER RATING: 2495 KW
YEAR: 2006
HOURS: 41000 OVERHAULED BY 30K.
ALTERNATOR: STAMFORD, 400V, 50HZ, 1500 RPM, 3555 KVA

SCOPE OF DELIVERY:
ENGINE
ALTERNATOR
BASE FRAME
CONTROL PANEL
GAS STREET
HEAT EXCHANGER
RADIATOR
TRANSFORMER PUMPS
2006
Price  
  NL   request
124965139 1020

RETSCH BB 300 XL for sale
Retsch jaw crushers BB 300 XL


Retsch jaw crushers BB 300 XL; The jaw crushers BB 300 is used for fast, effective coarse and rough crushing process of medium-hard, hard, brittle and hard tough materials. Due to the design variants (E.g. heavy metal ...

 
Retsch jaw crushers BB 300 XL;

The jaw crushers BB 300 is used for fast, effective coarse and rough crushing process of medium-hard, hard, brittle and hard tough materials. Due to the design variants (E.g. heavy metal free) and the performance and safety characteristics it is ideal for sample preparation in the laboratory and operating.

Smaller sample volumes can be crushed in the BB 300 batches, for larger volumes of continuous operation is possible. Gap adjustment and zero point adjustment allow for reproducible results. The disk spring package is an overload protection device and, together with the central lubrication system, guarantees a long operating life.

Application examples
Basalt, building materials, ores, feldspar, glass, granite, ceramic, carbon, coke, alloys, minerals, alumina ceramics, quartz, fireclay, slag, Silicon, stones, cement clinker,

Advantages
High crushing ratio
Zero point adjustment to compensate for wear and tear
Infinitely variable slit width
Overload protection
Large selection of materials for the analysis of neutral size reduction
Back splash safe folding funnel with quick release
Brake motor with safety switch
Easy cleaning of the break room
Connection for dust extraction
Central lubrication system
Installation version for online use
Version for the size reduction of semiconductor materials
Performance characteristics
Usage area: Coarse and rough crushing process
 
12,200 €  
    request
124929842 403

P.E. LABELLERS S.P.A. FUTURA TOP 16T / 1120 / 3S-3E for sale
Labeling Machine P.E. Futura TOP 16T - 14.000 bph


Labeling Machine P.E. FUTURA TOP 16T – 14000 bph This PET bottle labeling machine was delivered by P.E Labellers S.p.A in year 2008 and it is recently dismantled. This Futura TOP 16T is designed to use hot melt glue ...
used machine
 
Labeling Machine P.E. FUTURA TOP 16T – 14000 bph

This PET bottle labeling machine was delivered by P.E Labellers S.p.A in year 2008 and it is recently dismantled. This Futura TOP 16T is designed to use hot melt glue in wrap-around pre-cut plastic labels and cold glue with paper labels place on front-back-neck positions of PET containers. Equipment is in excellent condition and ready for immediate delivery.

Manufacturer P.E. Labellers S.p.A, Italy
Manufacturer’s type FUTURA TOP 16T/1120/3S-3E
Manufacturing year 2008
Change parts for 0.5 – 1.0-1.5 and 2.0 liters PET bottles
Capacity 14000 bph
Number of labeling stations 3 Stations
Carousel diameter 1120 mm
Number of bottle turtles 16
Machine pitch 219,9 mm
Hot melt gluing Wrap-around pre-cut plastic or OPP labels
Cold gluing Paper labels (front-back-neck)
Control system: PLC Siemens S7-300 (panel view Siemens TP277)
2008
Price  
  FI   request
124965141 1800

SMICON PT 1500 for sale
Fumigation fumigation disinfection


Smicon PT 1500 Fumigation / Fumigation System In a fumigation, a room is flooded with a poisonous gas to fight pests / bacteria. Because they are toxic gases, special safety measures are required. Fumigations are common ...
used machine
 
Smicon PT 1500 Fumigation / Fumigation System
In a fumigation, a room is flooded with a poisonous gas to fight pests / bacteria. Because they are toxic gases, special safety measures are required. Fumigations are common in the storage of organic materials (eg grain storage, in warehouses of harbors, silos, mills), in addition, in churches to control the woodworm.



It is a device which is used for the disinfection of rooms. Formaldehyde is boiled on the left-hand cooking plate and placed in a stream of air in a room together with condensed water (right hearth) to kill all the bacteria.

Former list price 9.900EUR
2003
2,100 €  
    request
124929800 303

SIDEL 19.200 BPH Series 2 PLUS for sale
Blow Molding Machine SIDEL SBO 12 Series 2+


Blow Molding Machine SIDEL SBO 12 series 2 Plus - 19200 bph with all auxiliaries This stretch blow molding machine SIDEL SBO 12 was built in 2003 as series 2 and upgraded to series 2 Plus in 2007 by SIDEL with their A ...
used machine
 
Blow Molding Machine SIDEL SBO 12 series 2 Plus - 19200 bph with all auxiliaries

This stretch blow molding machine SIDEL SBO 12 was built in 2003 as series 2 and upgraded to series 2 Plus in 2007 by SIDEL with their AIRBACK and the speedkit for 1.600 bph per cavity (= 19.200 bph). This blow molder comes with box tipper and preform feeding unit. All equipment has been last thoroughly overhauled by a professional company and Factory Acceptance Test (FAT) have been completed. The current setup is for preforms with standard PCO1810 - 28 mm neck for CSD, and it can be converted to run alternative necks as well.

Technical data blow molder:
Manufacturer SIDEL
Model SBO 12, series 2 Plus, S7N 5436
Manufacturing year 2003
Refurbishing and upgrade 2007
Number of cavities 12
Nominal output: 19200 bph in 1.5 liter
Neck format PCO 1810 - 28 mm
Container sizes: 0.2 – 2.5 liters
Max 35 bar air consumption FAD 16.7 m3/min with 0.5 liter and 25 m3/min with 1.5 liter
Cooling capacity (10-12C water) approx 95 kW
Installed electric power 442 kW
Containers measurements
Largest bottle volume 2.5 L
Bottle diameter 50-115 mm (cylindrical) / 130 mm (square)
Tallest bottle height 350 mm
2003
Price  
  FI   request
124965143 1800

SMICON AFT 2/1500 for sale


Smicon AFT 2/1500 Fumigation / Fumigation System In a fumigation, a room is flooded with a poisonous gas to fight pests / bacteria. Because they are toxic gases, special safety measures are required. Fumigations are com ...

 
Smicon AFT 2/1500 Fumigation / Fumigation System
In a fumigation, a room is flooded with a poisonous gas to fight pests / bacteria. Because they are toxic gases, special safety measures are required. Fumigations are common in the storage of organic materials (eg grain storage, in warehouses of harbors, silos, mills), in addition, in churches to control the woodworm.



It is a device which is used for the disinfection of rooms. Formaldehyde is boiled on the left-hand cooking plate and placed in a stream of air in a room together with condensed water (right hearth), killing all the bacteria.



Former list price 10,900 EUR net

More articles - new and used - can be found in our shop!
International shipping costs on request!
 
2,300 €  
    request
124929796 409

AUTEFA SOLUTIONS Uni Box 2000 for sale
Automatic Vertical Baling Line AUTEFA


Automatic Vertical Baling Line AUTEFA, year 1999 This baling line was made by AUTEFA in year 1999. The line has been used to press bales from a fibrous by-product from a pulp process, and is suitable for different kin ...
used machine
 
Automatic Vertical Baling Line AUTEFA, year 1999

This baling line was made by AUTEFA in year 1999. The line has been used to press bales from a fibrous by-product from a pulp process, and is suitable for different kinds of man-made and natural materials, including cotton, wool, straw, paper, plastic etc. The baling system consists of four parallel infeed and pre-pressing lines, two main presses with wrapping and strapping functions, a two-lane rail system to and from the presses and an automated warehouse system in two floors including a lift for product bales, stackers, labelers and conveyors. The system can bale two different materials simultaneously, as each fiber line is assigned to a different pre-press.

Working description:

The material is pneumatically conveyed via an air tube to a vertical dosing system. The material is separated from the transporting airflow and collected into a chamber, which cyclically releases the accumulated material into another collection chamber below it. Once the desired amount is collected to the second chamber, it is gravitationally released to a pre-pressing unit below. In the pre-pressing unit, the material is pressed into a bin, which is then transported via the rail system to the main press. The main press unit presses the bale into desired dimensions, removes the bin and wraps plastic straps and film around the bale. The bin is then transported back to pre-pressing unit and the bale to an automated warehouse via the two-lane rail system.

Technical data:

Manufacturer: Autefa Solutions
Year: 1999
Type: Uni Box 2000
Capacity: 220 t/day
Control PLC: Allen Bradley
Number of pre-presses: 4
Number of main presses: 2
Number of operators: 1
1999
Price  
  FI   request
124965145 1800

SMICON FTA 1500U-6L for sale
Fumigation fumigation disinfection


Smicon FTA 1500U-6L fumigation / gassing system In a fumigation, a room is flooded with a poisonous gas to fight pests / bacteria. Because they are toxic gases, special safety measures are required. Fumigations are comm ...

 
Smicon FTA 1500U-6L fumigation / gassing system
In a fumigation, a room is flooded with a poisonous gas to fight pests / bacteria. Because they are toxic gases, special safety measures are required. Fumigations are common in the storage of organic materials (eg grain storage, in warehouses of harbors, silos, mills), in addition, in churches to control the woodworm.

It is a device which is used for the disinfection of rooms. Formaldehyde is boiled on the left-hand cooking plate and placed in a stream of air in a room together with condensed water (right hearth) to kill all the bacteria.

Former list price 9,900 EUR

Item condition: used

More articles - new and used - can be found in our shop!
International shipping costs on request!
 
2,500 €  
    request
124929795 107

SCHRÖDER MAK V 1500 / 2,5 for sale
motor-driven folding machines


Max sheet width 1500 mm maximum sheet thickness 2.5 mm at 400 N/mm2 max. opening of upper jaw 120 mm lift of bending jaw: 70 mm width 2300 mm depth without backg ...
used machine
 
Max sheet width 1500 mm
maximum sheet thickness 2.5 mm at 400 N/mm2
max. opening of upper jaw 120 mm
lift of bending jaw: 70 mm
width 2300 mm
depth without backgauge 700 mm
depth with backgauge 1600 mm
height 1175 mm

back gauge, manual, 750 mm
PLC control PS3 with scale for prechoice of bending angle
Automatic and manual mode
operator panel
foot switch
1994
Price  
    request
124964865 106

HIDRALMAC PH4C Platinum for sale
Hydraulic 4-column press 500 T


Here are the technical data of the machine offered: If the data does not fit exactly, please request by clicking an individual offer according to your wishes : ? Contact us for a custom quote? HIDRALMAC manufactur ...
used machine
 
Here are the technical data of the machine offered:
If the data does not fit exactly, please request by clicking an individual offer according to your wishes :

? Contact us for a custom quote?

HIDRALMAC manufactures presses exactly to your liking at surprisingly reasonable prices !

To have no problems with the procurement of spare parts , almost exclusively components MAde in Germany be incorporated into the HIDRALMAC presses.



General information:

Hydraulic 4-column press 500 T with nitrogen compression for 280 Bar
ATTENTION Extra picture
Columns and cylinder are made of tool steel SAE 1045 (identical to German standard C 45) and the outside induction hardened and chromed.
The linear guides of the plunger are made using bronze sliding sleeves.
Manuals and operating instructions for the motors, pumps and the actual press as well as the CE declaration (all in duplicate)
The machine complies with the EU Machinery Directive 2006/42 / EG.EN Hydraulic Presses
(4 Column Press Four Column Press, 4-column press, press columns, 4 column press, Column Press hydraulic four-column press, hydraulic 4-column press, hydraulic column press, hydraulic 4-column press, hydraulic column press
Hydraulic press, hydraulic press, hydraulic press,)

Specifications + Dimensions:

Capacity: 500 tonnes at 250 Bar
Retraction force of the plunger: 40 tons
Master cylinder: 2 pieces Ø 360 mm with induction hardening and chrome trim
Auxiliary cylinder: 2 pieces Ø 120 mm with induction hardening and chrome trim
Motors: Total 62 KW
Voltage / frequency: 400 V / 50 Hz
Voltage of 24 V .: Steuerungk
An axial piston pump: 290 liters / min. (Rexroth / Bosch A4VSO125)
Stroke length: 1000 mm
Installation height: 1500 mm (distance worktop - ram plate with the cylinder retracted)
Workspace: 2100 x 1500 mm
Table and ram plate: 2100 x 1500 mm with T-slots according to customer requirements
Total size tabletops: ca. mm 2750 x 1600
Total size follower plates: ca. mm 2750 x 1600
Working height: 850 mm (floor to top of table)
Speed: forward 300 mm / sec, return 300 mm / sec.. (at 20 T ram weight)
Speed printing phase: 200 to 28 mm / sec, 300 to 20 mm / sec, 500 to 6 mm / sec..
Overall Dimensions (D x W x H): 2900 x 2800 x 4040 mm
Total weight: about 39 to
Hardware Hydraulics:
Hydraulic block: REXROTH
Hydraulic Tank: 2000 Lt. volume
Oil consumption: 1000 Lt.
Ram protection: mechanically and hydraulically
Pressure Control: via PLC (minimum pressure 50 tons)
Water Cooling: for oil cooling - externally mounted (without cables)
Heating oil in the tank: to keep the minimum temperature of the oil at low outside temperature
Lubrication of guides: automatic, number of strokes and lubrication time on PLC adjustable
Additional hydraulics: 2 inputs and outputs for tool
Mechanical safety devices:
Side and rear double-wing doors protection - secured with magnetic limit switches
Protection terrace surrounding the hydraulic section with ladder
Ejector (with simultaneous flow and return of the 4-cylinder):
Capacity: 4 x 15 tons at 250 bar
Cylinder: 4 x Ø 90 x 70 mm - front + rear mounted on Presssenkoerper
Stroke length: 300 mm (adjustable via PLC)
Speed:. Advance 95 mm / sec, return 240 mm / sec.
Additional Bars: 2100 x 100 x 150 mm with T - slots - front and rear
Accessories Control:
Control system: SIEMENS S7 300 (suitable for subsequent full automation)
Memory capacity: 200 programs,
Pressure setting: via Monitor 50-500 to
Speed: adjustable via monitor 0-300 mm / sec. in automatic mode
Monitor: SIEMENS 12 \"touch panel
Electronic components: SIEMENS / MOELLER
Controller: on arm
Control: automatic 2-hand operation with key switch, manually via control panel in setup mode
Operation: two-hand operation to move
USB interface: for data transmission
Remote Control: Siemens for remote maintenance
Light Sensors: SICK 1500 mm at the front of the work area
Spacer sensors: the stroke length
Maintaining constant pressure: 0-900 sec.
Lighting: the entire press room by LED
Piece counter
Operation of the controller:
The linear measuring rod divided the control in each case with the position of the plunger and the ejector. The travel, the upper breakpoint and the changeover point at which the press of deadhead should switch to operating speed, as well as to driving end position can be easily and quickly entered via the monitor control.
The working speed can be set in 1 mm / sec increments from 0 to 10 and in 10 mm increments from 10 to 300 mm.
In addition, the machine features a pressure monitor which either when it reaches the desired pressure the plunger moves back up or the pressure within the preset time keeps constant (with 5% tolerance) and then opens.
The controller monitors the secured areas, the overall hydraulic, the pumps and the temperature.
In addition, it controls the synchronization between the master cylinder and regulates in unilateral burden after.
The controller is housed in a separate cabinet.
The actual press is operated via a fixed to a swing arm control panel. This reduces the paths.
Additional accessories:
Polycarbonate glass 8 mm indoors the back door
Polycarbonate glass 8 mm on the lateral doors of the work area and the work area
Liquid channel with 25 mm / radius on the front and back and side of the table
Special features of the press:
Including 10% reserve (capacity max. 550 tons)
Steel quality: stainless steel ASTM A36 LCG, manufactured according to DIN 8651
Motor and pump switch off when the tool is closed and control at 5% loss after (huge cost savings)
Nitrogen compression system:
Comes complete with a nitrogen compression system that produces an explosive pressure of 280 bar and switched on and can be switched off.


You are looking for a tailor-made machine?
? Contact us for a custom quote.
HIDRALMAC
Presses, press brakes and guillotine shears with the right degree
; ready for operation
2014
Price  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More models (2 or more machines):
(18)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Find used machinery dealers in your country