british flag
Resale Logo

Axis used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information international brokers in used printing and paper converting equipment  Palm Brokers ApS  http://www.palmbrokers.dk 
banner logo
start page > keywords Axis > results
maximum number of results exceeded > 1000
please refine your search
4213 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
113395021 205

FAVORIT BT 800 for sale
Line boring machines for holes


Drilling machine series favorite BT 800 Working width 800 mm, passage height 70 mm that machine has a split boring bar with 11 spindles in the 32 mm grid. These are driven individually and are separately cut - or can ...
used machine
 
Drilling machine series favorite BT 800

Working width 800 mm, passage height 70 mm that machine has a split boring bar with 11 spindles in the 32 mm grid.
These are driven individually and are separately cut - or can be activated.

The boring bars are independently adjustable, beyond movable side on a common axis.
So, for example, shelves can be oblique dowel or drill holes of rows of (both units in 90 ° - position) parallel.
This is also a fence with several adjustable stop baking.

The machine bores from the top and front.
The drilling support is pivoted electric motor.
There are holes at any angle between 0 and 90 degrees (such as MITRE holes in frame poles).
The fine adjustment is carried out manually, tags are attached to the left rear sprocket for common angles.

The position of the holes relative to the thickness of the material can be set manually via a Noniusskala very closely.
the drilling depth setting manually with knurled screws (scale).

Work-piece clamping and aggregate feed are pneumatically (air pressure, 6 bar required).
The work process is initiated with a foot pedal (with the immediately stop).

The machine is entirely made of cast iron and is therefore very stable, but also very heavy (approx. 820 kg).
Very accurate, is easy to set up and to use and ready to use.
9gtb3qghm
The required installation space is 1650 mm, T B 1300 mm (in swivelled State 1800 mm), height: 870 mm.

Masch. No. 199

The machine is in good condition, ready to use.

Subject to changes, errors, prior sale!

Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC systems + technology GmbH
Mechanical engineering
Mill mat 4
CH-4952 Eriswil/Switzerland

Tel. 0041 62 966 18 32
Fax 0041 62 966 21 12
1970
690 €  
  CH   request
113394919 107

SAF PLASMATOME.B 25 for sale
Plasma Cutting Machines


OVERVIEW: Brand: SAF Model: PLASMATOME.B 25 Application type: Plasma Cutting Machine type: Plasma Cutting Machine Availability: Immediately Construction year: 2002 Production hours: 31200 Location: Germany Origi ...
used machine
 
OVERVIEW:
Brand: SAF
Model: PLASMATOME.B 25
Application type: Plasma Cutting
Machine type: Plasma Cutting Machine
Availability: Immediately
Construction year: 2002
Production hours: 31200
Location: Germany
Origin country: France

GENERAL DATA:
Measurements width: 18000 mm
Measurements depth: 8000 mm
Measurements height: 2000 mm

MAIN DRIVE:
Plasma brand: SAF Netrajet HP 125

CONTROL UNIT:
Brand: SAF
Model: Digisaf 5
Interface: Floppy

MOVEMENT:
X-AXIS:
Movement: 15000 mm
Working feed: 15 m/min

Y-AXIS:
Movement: 3000 mm
Working feed: 15 m/min

MAX MATERIAL THICKNESS:
Steel: 22 mm
Stainless steel: 15 mm
Aluminium: 15 mm

MEDIA:
Main electronic connection: 400 V / 50 Hz
2002
Price  
  DE   request
113394910 103

CHIRON Mill-800 FA for sale
CNC Milling Centers


OVERVIEW: Brand: Chiron Model: Mill-800 FA Application type: Milling Machine type: Machining Centers Availability: Immediately Construction year: 2012 Location: Italy Origin country: Germany GENERAL DATA: Mac ...
used machine
 
OVERVIEW:
Brand: Chiron
Model: Mill-800 FA
Application type: Milling
Machine type: Machining Centers
Availability: Immediately
Construction year: 2012
Location: Italy
Origin country: Germany

GENERAL DATA:
Machine weight: 9100 kg

CONTROL UNIT:
Brand: Siemens
Model: Sinumerik

MOVEMENT:
X-AXIS:
Movement: 800 mm
Rapid traverse: 60 m/min

Z-AXIS:
Movement: 550 mm
Rapid traverse: 60 m/min

WORKPIECE:
Workpiece weight: 1200 kg

TABLE:
Outer width: 500 mm

TOOLS:
Max weight: 4 kg

MEDIA:
Main electronic connection: 400 V / 50-60 Hz
Power consumption: 66 kVA
Chip conveyer: yes
2012
Price  
  IT   request
113394721 101

FEHLMANN P100 XL CNC 3 for sale
Drilling And Milling Machines


Travels -X 2100 mm -Y-axis 435 mm -Quill stroke (Z) 210 mm -Travel machine head (W) 590 mm Table 2100 x 650 mm Work spindle SF 32 Spindle speeds 50-7100 RPM Spindle drive 5 kW HEIDENHAIN 355 C. completely overh ...
used machine
 
Travels
-X 2100 mm
-Y-axis 435 mm
-Quill stroke (Z) 210 mm
-Travel machine head (W) 590 mm
Table 2100 x 650 mm
Work spindle SF 32
Spindle speeds 50-7100 RPM
Spindle drive 5 kW
HEIDENHAIN 355 C.
completely overhauled 2008 - excellent condition
1991
Price  
  CH   request
113394703 101

YCM FV-56A for sale
CNC Machining Centre


X-travel: 560mm, y-travel: 410mm, z-travel: 450mm, clamping surface: 560x420mm, spindle nose-table edge distance: 110-560mm, spindle centre-z-axis stand distance: 425mm, table load: 300kg max., rotational speed: 40-10000 ...
used machine
 
X-travel: 560mm, y-travel: 410mm, z-travel: 450mm, clamping surface: 560x420mm, spindle nose-table edge distance: 110-560mm, spindle centre-z-axis stand distance: 425mm, table load: 300kg max., rotational speed: 40-10000/min, tool mount: SK 40, feed rate: 1-10000mm/min, rapid traverse x and y-travel: 36m/min, rapid traverse z-travel: 24m/min, magazine with double arm: 20, tool diameter: 90mm max., tool length: 250mm max., tool weight: 6kg max., tool changing time: 3.5s, compressed air consumption at 5.5bar: 100l/min, connected load: 16kVA, motor-drive power: 1.6-3kW, drive power: 11kW, control: FANUC 32i MB – MXP200FB(B), length: 2640mm, width: 1850mm, height: 2470mm, weight: 3t, operational hours: ca. 10000h, including accessories: Rotary distributors, tightening bolts, automatic central lubrication with minimum quantity warning, complete coolant system: Tank capacity: 180l, pump and distributor nozzles, 6 pieces of machine leveling screws and washers, thread cutting without compensation chuck.
2012
Price  
  DE   request
113228968 103

HAAS TM-1 WERKZEUGRAUM MÜHLE for sale
CNC Tool-Milling Machines


TABLE size: 47,75 ' x 10.5 ' X AXIS TRAVEL: 30" Y AXIS TRAVEL: 12" "Z - AXIS TRAVEL: 16" SPINDLE speed: 4,000 rpm SPINDLE TAPER: CAT 40 AUTOMATIC tool change: 10 positions SPINDLE DRIVE MOTOR:  ...
used machine
 
TABLE size: 47,75 ' x 10.5 '
X AXIS TRAVEL: 30"
Y AXIS TRAVEL: 12"
"Z - AXIS TRAVEL: 16"
SPINDLE speed: 4,000 rpm
SPINDLE TAPER: CAT 40
AUTOMATIC tool change: 10 positions
SPINDLE DRIVE MOTOR: 7.5 HP
DISTANCE SPINDLE TO TABLE: 4 "-20"
MAX TABLE LOAD: 1,000 LBS.
"MACHINE DIMENSIONS: (APPROX) 85" X 64 "X 96"
NET WEIGHT: (APPROX.) 1.360 KG

Equipped with:
TAXES; HAAS,
4TH AXIS PREWIRE,.
COOLING TANK / PUMP,
AFTERMARKET ENCLOSURE WITH DOOR LOCK,
SINGLE OR 3 PHASE POWER.
2003
6,800 €  
  DE   request
113228813 101

MAZAK VTC 200C-II for sale
CNC Vertical Machining Centre


Moving Column Type Table size 2000 x 510 mm Movement x-Axis 1660 mm y-Axis 510 mm z-Axis 510 mm Number of tools in magazine 30 pieces Maximum spindle speed 12.000 1/min Tool taper DIN 69871-SK 40 CNC Contr ...
used machine
 
Moving Column Type
Table size 2000 x 510 mm
Movement x-Axis 1660 mm
y-Axis 510 mm
z-Axis 510 mm
Number of tools in magazine 30 pieces
Maximum spindle speed 12.000 1/min
Tool taper DIN 69871-SK 40
CNC Control Mazatrol Fusion 640
2004
Price  
  NL   request
112998848 107

TRUMPF Trumatic 500 for sale
Punching Machines


OVERVIEW: Brand: Trumpf Model: Trumatic 500 Application type: Punching Machine type: Turret Punching Machine Availability: Immediately Construction year: 1996 Production hours: 50400 Location: India Origin count ...
used machine
 
OVERVIEW:
Brand: Trumpf
Model: Trumatic 500
Application type: Punching
Machine type: Turret Punching Machine
Availability: Immediately
Construction year: 1996
Production hours: 50400
Location: India
Origin country: Germany

GENERAL DATA:
Measurements width: 5300 mm
Measurements depth: 5200 mm
Measurements height: 2000 mm
Machine weight: 13800 kg

MAIN DRIVE:
Punching force: 220 kN
Maximum sheet thickness: 6 mm

CONTROL UNIT:
Brand: Bosch
Model: Trumagraph

MOVEMENT:
X-AXIS:
Movement: 2500 mm

Y-AXIS:
Movement: 1250 mm

MAX MATERIAL THICKNESS:
Steel: 6 mm
Stainless steel: 3 mm
Aluminium: 2 mm

TOOLS:
No. of stations: 20
No. of index: 20

MEDIA:
Main electronic connection: 480 V
Power consumption: 19 kVA
Air pressure: 6 bar
1996
Price  
  IN   request
112998809 101

DMG GILDEMEISTER DMC 75 V Linear for sale
Vertical Numerically Controlled Machining Centres


Machining Center 5 axes Manufacturer: DMG Gildemeister Type: DMC 75 V linear Year of manufacture: 2007 Control: HEIDENHAIN of iTNC 530 axis: 5 In XYZ rapid traverse: 90 m / min travel distances: X: along 885 Y:  ...
used machine
 
Machining Center 5 axes

Manufacturer: DMG Gildemeister
Type: DMC 75 V linear
Year of manufacture: 2007
Control: HEIDENHAIN of iTNC 530 axis: 5
In XYZ rapid traverse: 90 m / min travel distances:
X: along 885
Y: 600 cross
Z: 600 vertical
B: fork head - 10 ° up to + 110°
C: table 360°

Tools: 60 x HSK 63
Chip to chip time: 6 sec.
Table ø: 750 mm
Table load: 600 kg
Power: 35/25 KW (40 / 100% ED)
Speed: 18.000U/min
Chip conveyor: Yes
Einschaltstd.: 48.500 h
Spindelstd.: 17.500 h

Lots of extras

-High pressure pumps
-Blow air through spindle Center
-M & H infrared probes
-Blum laser tool measurement
4-way Rotary feedthrough through the middle of the table
-Mode 4



Machine is available at the end of September.

Errors excepted

2007
Price  
  DE   request
112998677 205

HEYLIGENSTAEDT for sale
Slot boring machine


Stroke X-axis: 70 mm, stroke y axis: 80 mm, Pneumatic clamping, many various tools.

 
Stroke X-axis: 70 mm, stroke y axis: 80 mm, Pneumatic clamping, many various tools.
 
950 €  
  DE   request
112998569 107

DORSEY Profilprojektor for sale
Optischer


Dorsey Metrology / Paragon 24 P / Optical Comparator Designed with tight tolerances to maintain uncompensated absolute inherent accuracy / Made in USA Features: 24" (600mm) Vertical screen for optimum viewing Ere ...
used machine
 
Dorsey Metrology / Paragon 24 P / Optical Comparator
Designed with tight tolerances to maintain uncompensated absolute inherent accuracy / Made in USA

Features:

24" (600mm) Vertical screen for optimum viewing
Erect and reversed profile image
High resolution ground glass screen with calibration reticle, 90 degree cross lines
Machined chart ring with vernier protractor, 1 minute graduation, and chart clips
Coated telecentric parfocal optics
3 position rotary lens & condenser turret (4 position optional)
Quartz halogen profile light source 24V, 150W
Bright 250W fiber optic surface illumination
Solid cast iron, nickel plated stage
Triple universal dovetails accomodate wide range of fixtures
36" x 8" (914x200mm)overall size
Crossed roller bearings for superior performance
500 lbs capacity
24"(610mm) X-axis motorized travel
10" (250mm)Y-axis motorized travel
3" Motorized focus travel
Linear scale resolution 0.00025mm/.00001"
±15 degree true parfocal helix stage adjustment, with 5 minute vernier
Joystick control, computerized microstep motor controller with X and Y axes & focus
Integrated hood

Optional Features:

Internal edge detection
Nikon optics
Output for electronic rotary screen protractor (Q-axis) with choiceable 1 minute or 1/100 of a degree resolution
Choice of readout options
CNC computer controlled readout systems
Extra bright through lens surface illumination with Nikon lens option
Harsh Environment package
Wide choice of lenses
Extended hood & curtains
Tooling
2011
Price  
    request
112998555 205

WOODLAND MACHINERY SXC-2400 for sale
CNC drillling-mortising machine


Type SXC-2400 Working thickness 10-60mm Working depth 80mm Working length 2400mm XY axis rack and pinion , Z axis screw Max traveling speed 50m/min Max working speed 30m/min Nc studio control system  ...
new machine
 
Type SXC-2400
Working thickness 10-60mm
Working depth 80mm
Working length 2400mm
XY axis rack and pinion , Z axis screw
Max traveling speed 50m/min
Max working speed 30m/min
Nc studio control system
Spindle power 3.5 kW
Spindle speed 0-18000 rpm
Run Command G code
Air pressure 0.6-0.8 Mpa
Motor power 6 kW
Video abcs://abc.youtube.com/watch?v=37U7iZgt9I4&feature=youtu.be
new
9,300 €  
  LT   request
112597743 109

MATRA / FANUC TAPE CUT - W 2 for sale
Wire Cutting Spark Erosion Machine Tools


Table travel: 500 x 350 mm Max work piece sizes: 450 x 650 x 300 mm maximum workpiece weight: 350 kg Total power consumption: 11 KVA / 380 Volt Machine weight: 800 kg Equipment / Accessories: CNC 5 axis CNC Fan ...
used machine
 
Table travel: 500 x 350 mm
Max work piece sizes: 450 x 650 x 300 mm
maximum workpiece weight: 350 kg
Total power consumption: 11 KVA / 380 Volt
Machine weight: 800 kg

Equipment / Accessories:

CNC 5 axis CNC Fanuc A-04 B - 0224 - B 210
-4 axes simultaneous-
Transistor pulse generator
Programming station

All technical data are created according to our best knowledge and existing documents; Expressly reserved by mistake.
Each party has the opportunity to test the machine before making a purchase in our factory under power.
1989
Price  
  DE   request
112265711 202

HOMAG BAZ 32/G for sale


CNC milling - edges in glue - post processing and drilling Centre HOMAG type: BAZ 32/G with gluing unit for the production of furniture parts, solid wood or similar materials machines no. 0-201-22-2134 Working area x-3 ...
used machine
 
CNC milling - edges in glue - post processing and drilling Centre HOMAG type: BAZ 32/G
with gluing unit for the production of furniture parts, solid wood or similar materials machines no. 0-201-22-2134
Working area x-3600 and Y-1200 mm, Z - 120 mm (stroke 340 mm)
C axis as rent trailing axle to the x-, Y-axis travel speeds max. 80 m/min in X - and Y-direction
Max. 30 m/min in Z-direction
Technical data: workpiece length of 3600 mm for single occupancy
Max 1200 mm pendant occupancy
Workpiece width max. 1200 mm
Workpiece thickness edge max 40 mm
without edge max. 60 mm with stand type tensioner
without edge max. 120 mm with clamping template
at least 12 mm chamfer milling
RADIUS milling min. 2 x radius + 10 mm
Main spindle 12 kW liquid-cooled three-phase asynchronous motor
Tool holder HSK F63
Tool length of 200 mm
Tool Ã? max. 150 mm for cutters, max 200 mm for grinding tools
Tool weight of 6 kg incl. recording
Frequency converter 15 kW to the electronic speed control. Speed range, infinitely programmable from 1500-18000 RPM
Drill head 17 spindles 1 engine 1.9 kW, speed 75000 UPM
for vertical drilling, opening stroke 40 mm
ever. Spindle separately available 11 spindle in the X direction 7 spindles in the Y direction, spindle distance 32 mm
Plate Exchange magazine 12, HSK 63 tool and unit Assembly: 12 x Ã? Max 130 mm or 6 x Ã? Max 180 mm and 6 x Ã? 70 mm
Wechselaggregatte:
the automatic change in the main spindle
Cutting saw and end trimming unit and compound miter saw Ã? 180 mm on C-axis unlimited swivel for grooves and cuts from the top with any angle to the workpiece. Caps edge overhangs and cutting of workpieces, as well as rectangular notches
Blow-off nozzle workpiece using C-axis swiveling unlimited
Drilling/milling unit 4 spindles for horizontal drilling and light milling

Edges changer for the processing of rolls
3-roller plate with role disconnecting device for the automatic change of edge
Roll Ã? max. 800 mm, length of min. 350 mm
Rest edge lengths surveillance with feed stop at 1800 mm

Separate Y-axis for rapid deployment of the gluing unit
360° gluing unit for grade edges with direct glue specification and Manual single strip feed,.
pneumatic without melting, melting glue granule feeding by hand, 1 first press roll, 1 after pressing role edge height of 45 mm
Edge thickness plastic 0.4-3 mm,.
Veneer 0.4-2 mm
Edge length min. 230 mm
Clamping table smooth table with high-strength plywood panel
Connectors for 16 vacuum clamp or stencils
15 vacuum clamp 120 x 120 mm, H 100 mm
11 longitudinal retractable stops lifting 140 mm
2 retractable page stops for shuttle machining
Machine zero point front, left
Grown laser positioning help at the main spindle.
2 vacuum pump 66/100 m³/h
Safety equipment floor mat, Sicherheitsabschrankung control and software
Homatic CNC system NC 83 with PLC control HOMAG WOODWop 4.5
Freestanding control cabinet
Operating voltage 380/400 Volt, 50/60 Hz
Power 33 kW
Weight 7 500 kg
Dimensions (L x W xH) ca. 8700x5000x2900mm


(Errors and omissions in the technical data as well as subject to prior sale)
 
Price  
  DE   request
112265707 202

HOMAG BOF 11 VENTURE 10 L for sale
Milling and drilling systems CNC


Work piece work piece length parameter all aggregates 4,000 mm single; 1375 mm pendant Workpiece length milling WZ-through. 25 mm 4175 mm single; 1550 mm pendant Werkstückbreite_Alle aggregates 1450 mm attacks front;  ...
used machine
 
Work piece work piece length parameter all aggregates 4,000 mm single; 1375 mm pendant
Workpiece length milling WZ-through. 25 mm 4175 mm single; 1550 mm pendant
Werkstückbreite_Alle aggregates 1450 mm attacks front; 1700 mm rear
Workpiece width milling WZ diameter. 25 mm 1525 mm attacks front; 1850 mm rear
Travel speeds vector speed 113 m / min
X - and Y - axis 80 m / min
Z axis 30 m / min
Clamping table with consoles and tubeless vacuum Guide
Working height 950 mm bottom workpiece
Vacuum system vacuum pump 100 / 140 m³/h
Main spindle 15 kW with interface for HSK F63, with key ring D 130,Drehzahl = Max 18888 1/min.
Tool weight of Max 3 kg maximum milling tool by. Grinding tool diameter 120 mm; 200 mm, hybrid storage, with aggregate interface, C-axis Swivel range without limit
Interface for FLEX5 unit rear derailleur 30-fold for Werkezuge and aggregates with HSK F63, Werkzeugdurchm. Max 140 mm: grinding tools of 200 mm with double gripper for quick tool change
Drill head 13 spindle motor 1,5 kW, frequency 9 vertical spindles regulated, high speed (6 spindle in X direction; 4 spindle in Y-direction). 4 horizontal spindles (2 spindle in X direction and 2 spindle in Y-direction)
Control power control PC 85
WoodWop software
Including tool holders and tools
Weight dimensions 32683 Barntrup (errors and omissions in the technical data as well as subject to prior sale) location
2008
Price  
  DE   request
112265663 1300

BENTLER 2500 C 4/0E for sale
Glass Edges Grinding Drilling and Washing Plant


Plant includes: (1) Roller Conveyor (2) Industrial Robot IRB 7600: Number of axis: 6, glass plate size: 1100x1300-2200x2600mm, cycle time: 13-18s (3) Bogie with 2 slots: Load capacity: 4t per frame, intake height: 510mm  ...
used machine
 
Plant includes: (1) Roller Conveyor (2) Industrial Robot IRB 7600: Number of axis: 6, glass plate size: 1100x1300-2200x2600mm, cycle time: 13-18s (3) Bogie with 2 slots: Load capacity: 4t per frame, intake height: 510mm (4) Roller Conveyor (5) Belt Conveyor: Shard extraction conveyor length: 500mm (6) Double-sided Grinding Machines: Glass plate thickness: 2-8mm, glass plate size: 500x500-2200x2600mm, coolant pump output: 2x280l/min, transport speed: 3-20m/min (7) Roller Conveyor (8) Portal Drilling Machine: Transport speed infeed/ outfeed conveyor: 20m/min, x-travel speed: 48m/min, y-travel speed: 64m/min, vertical stroke: 120mm, drilling diameter: 75mm (9) Tool Changer (10) Roller Conveyor: Length: 500mm (11) Washing Machine: Pumping pressure: 10bar, heating output: 12kW (12) Belt Conveyor (13) Roller Conveyor (14) Paper Applicator (15) Roller Conveyor (16) Unloading Conveyor (17) Industrial Robot IRB 7600 (18) Bogie with 2 slots: Load capacity: 4t per frame, intake height: 400mm.
 
Price  
  DE   request
112265649 104

G + H GEIBEL + HOTZ RS 1500 CNC for sale
CNC Round Grinding Machines


Control: Siemens Sinumerik 840 D Centre distance: 1500 mm Tip height: 180 mm Max grinding diameter: 355 mm Max Z axis speed: 12 m / min Min. speed of Z axis: 0.01 m / min. Max X axis speed: 8 m / min. Min. X axi ...
used machine
 
Control: Siemens Sinumerik 840 D

Centre distance: 1500 mm
Tip height: 180 mm
Max grinding diameter: 355 mm
Max Z axis speed: 12 m / min
Min. speed of Z axis: 0.01 m / min.
Max X axis speed: 8 m / min.
Min. X axis speed: 0.01 m / min.

External cylindrical grinding
Wheel, left side: 500 x 80 x 203.2 mm
Wheel peripheral speed: 45 m/sec.

Surface grinding
Wheel, right side: 300 x 40 x 127 mm

Internal cylindrical grinding
Grinding point maximum outer diameter: 80 mm
Grinding depth Max: 120 mm
Grinding spindle speed: 36000 min-1
Grinding spindle drive power: 2,2 kW

Workpiece spindle speed: 0-500 min-1
Taper hole of work piece headstock: MK 5
Total weight: 7800 kg

- Technical error and prior sale is reserved. -
2001
Price  
  DE   request
112100996 103

ANAYAK VH-PLUS 3000 for sale
CNC Horizontal Milling Machine


Manufactured: Anayak Mod: VH-PLUS 3000 YOM: December 2001 Control: Heidenhain TNC-430 M Tools changer: 100 tools Working range: X = 3000 Y = 1500 Z = 0-1768 mm Work table: 12 ...
used machine
 
Manufactured: Anayak
Mod: VH-PLUS 3000
YOM: December 2001
Control: Heidenhain TNC-430 M
Tools changer: 100 tools
Working range: X = 3000
Y = 1500
Z = 0-1768 mm
Work table: 1250 x 1600 mm (U-axis)
Max. load: 5 tons

Milling head can switch from vertical to horizontal position automatically
The machine is equipped with an automatic universal milling head with B and C axis 2.5 °
Oil Cooled Spindle SK-50 DIN 69871 max. 4000 rpm with internal cooling 30 bar

Machine can be inspected under power.
2001
Price  
  PL   request
112100994 102

GEMINIS GHT 9 G4 1400x6000 for sale
CNC Horizontal Lathe


Manufactured: Geminis Model: GHT 9 G4 1400x6000 YOM: 2003 Control: Fagor 8055 TC / D Horizontal lathe with 4 sidewalls. C-axis positioning + / - 0.005 ° with rotating tool Max tur ...
used machine
 
Manufactured: Geminis
Model: GHT 9 G4 1400x6000
YOM: 2003
Control: Fagor 8055 TC / D

Horizontal lathe with 4 sidewalls. C-axis positioning + / - 0.005 ° with rotating tool
Max turning diameter over slide: Ø1400
Max turning diameter over cross slide: Ø1120 mm
Max workpiece length: 6000 mm
Spindle Bore: Ø160
Spindle Motor: 82 Kw
Speed: 0 to 710 rpm
Biggest Independent chuck: Ø1200 mm cast iron Ø630 mm chuck
Internal cooling: 14 bar
Steady rest with rolls, range: 0 - Ø500 mm

Machine can be inspected under power
2003
Price  
  PL   request
112100992 103

ZAYER 30 KCU 7000 for sale
CNC Column Milling Machine


Manufactured: Zayer Model: 30 KCU 7000 YOM: November 2004 CNC: Heidenhain TNC 530M Axis movements: (L x W x H) 7000 x 1500 x 2500 mm Work tables: one fixed table size 2000 x 5000 mm  ...
used machine
 

Manufactured: Zayer
Model: 30 KCU 7000
YOM: November 2004
CNC: Heidenhain TNC 530M

Axis movements: (L x W x H) 7000 x 1500 x 2500 mm
Work tables:
one fixed table size 2000 x 5000 mm
one turntable size 1800 x 1800 with length motion W = 1500.

Controlled angle milling head with positioning accuracy of 0.001 degree
Tools changer with 80 tools ISO 50 and internal cooling 20 bar.
The measuring probe is type Renishaw MP-16 for automatic measurement of the work piece and correction of zero point of clamping.
Max. work piece weight: 12 tons

Machine can be inspected under power
2004
Price  
  PL   request
112100989 107

TRUMPF TRUMATIC TC 260 R Rotation for sale
CNC Punching Nibbling Machines


Commute in X: 2800 mm Commute in Y: 1665 mm Table size: 5000 x 1570 mm Cutting force: 250 KN maximum sheet thickness: 6,4 mm maximum punching - diameter: 76.2 mm Total power consumption: 35 KVA / 380 Volt Machine  ...
used machine
 
Commute in X: 2800 mm
Commute in Y: 1665 mm
Table size: 5000 x 1570 mm
Cutting force: 250 KN
maximum sheet thickness: 6,4 mm
maximum punching - diameter: 76.2 mm
Total power consumption: 35 KVA / 380 Volt
Machine weight: approx. 20000 kg

Equipment / Accessories:

4-axis CNC control Trumagraph CC 300
10 - Pocket tool changer
Light barrier

All technical data are created according to our best knowledge and existing documents; Expressly reserved by mistake.
Each party has the opportunity to test the machine before making a purchase in our factory under power.
1991
Price  
  DE   request
112100978 107

FLOW 8mx2m IFB DWJ 7220 - 6000Bar for sale
Water Jet Cutting Machines


REF.-No. 00427 Designation of the plant used water jet system Manufacturer flow Model IFB DWJ 7220 year 2010 Hours of operation 10.100 h Flow high-pressure intensifier pump HyperJet D. Pressure 6000 bar Workspa ...
used machine
 
REF.-No. 00427
Designation of the plant used water jet system
Manufacturer flow
Model IFB DWJ 7220 year 2010
Hours of operation 10.100 h
Flow high-pressure intensifier pump HyperJet D.
Pressure 6000 bar

Workspace material contact area x axis 8000 mm (base)
Y axis 2100 mm (boom)

Cutting range (a averaged) x axis 7200 mm
Y axis 2000 mm Z axis stroke 200 mm

Workpiece height max. 175mm machine dimensions work table height 890 mm

System X axis 9130mm
Y axis 3950mm
Z axis without high pressure pipework 2300 mm

Available now
System must be by early September 2017 from the Hall out
2010
Price  
  DE   request
112100970 107  

FLOW IFB DWJ 7220 for sale
Water Jet Cutting Machines


REF.-No. 00427 Designation of the plant used water jet machine XXL Manufacturer flow Model IFB DWJ 7220 year 2010 Hours of operation: 10.000 h Flow high-pressure intensifier pump HyperJet D. Pressure 6000 bar W ...
used machine
 
REF.-No. 00427
Designation of the plant used water jet machine XXL
Manufacturer flow
Model IFB DWJ 7220 year 2010
Hours of operation: 10.000 h
Flow high-pressure intensifier pump HyperJet D.
Pressure 6000 bar

Workspace material contact area x axis 8000 mm (base)
Y axis 2100 mm (boom)

Cutting range (a averaged) x axis 7200 mm
Y axis 2000 mm Z axis stroke 200 mm

Workpiece height max. 175mm machine dimensions work table height 890 mm

System X axis 9130mm
Y axis 3950mm
Z axis without high pressure pipework 2300 mm

Available now
System must be by early September 2017 from the Hall out
2010
Price  
  DE   request
112100934 1300

ABB IRB 4400L/10 Type B for sale
Industrial Robot


Number of axis: 6 1, reach: 2550mm, load capacity: 10kg, velocity: Axis 1: 150°/s, axis 2: 150°/s, axis 3: 150°/s, axis 4: 370°/s, axis 5: 330°/s, axis 5: 381°/s, resolution: 0.01°/axis, control: irc5 M 2004, weig ...
used machine
 
Number of axis: 6 1, reach: 2550mm, load capacity: 10kg, velocity: Axis 1: 150°/s, axis 2: 150°/s, axis 3: 150°/s, axis 4: 370°/s, axis 5: 330°/s, axis 5: 381°/s, resolution: 0.01°/axis, control: irc5 M 2004, weight: 1.04t, including additional mount and acessories.
2009
Price  
  DE   request
112065746 109  

SODICK SL 400 Q for sale
Wire Cutting Spark Erosion Machine Tools


Procedures: [X x Y x Z] 400 x 300 x 250 mm maximum workpiece weight: 500 kg with automatic wire Threading Cutting in the water bath Cooler U / V-axis: +/-120 mm Taper: +/-25° Work capacity: 850 x 756 mm
used machine
 
Procedures:
[X x Y x Z] 400 x 300 x 250 mm

maximum workpiece weight: 500 kg
with automatic wire Threading
Cutting in the water bath
Cooler
U / V-axis: +/-120 mm
Taper: +/-25°
Work capacity: 850 x 756 mm
2014
Price  
  DE   request
112053837 109  

CHARMILLES ROBOFIL 440 SL Premium for sale
Wire Cutting Spark Erosion Machine Tools


Procedures: [X x Y x Z] 550 x 350 x 400 mm maximum workpiece size X: 1200 mm maximum workpiece size y: 700 mm maximum workpiece size Z: 400 mm maximum workpiece weight: 1500 kg Table size X: 900 mm Table size Y ...
used machine
 
Procedures:
[X x Y x Z] 550 x 350 x 400 mm

maximum workpiece size X: 1200 mm
maximum workpiece size y: 700 mm
maximum workpiece size Z: 400 mm
maximum workpiece weight: 1500 kg
Table size X: 900 mm
Table size Y: 600 mm
with automatic wire Threading
Cutting in the water bath
U / V-axis: 550 x 350 mm
Taper: +/-30 ° at 400 mm
2005
Price  
  DE   request
111928627 102

KB-1811 WMW DPS 1800 x 1000 for sale
Thread Turning Machines, External


Plan lathe, used machine, Max Ã? 2000 mm x 1000 mm, 23 kW Article number: KB-1811 Brand: WMW Model: DPS 1800 x 1000 Series No.: on request Capacity (kW): 23 Voltage: 380-220 Frequency (Hz): 50 Rpm: 18 sp ...
used machine
 
Plan lathe, used machine, Max Ã? 2000 mm x 1000 mm, 23 kW

Article number: KB-1811
Brand: WMW
Model: DPS 1800 x 1000
Series No.: on request
Capacity (kW): 23
Voltage: 380-220
Frequency (Hz): 50
Rpm: 18 speeds of 1.4-71
Amperes (A): 50
Dimensions Lxwxh (mm): 3800 x 2350 x 2350
Stucco number in stock: 1
Weight (kg) ca: 12800
Tip width (mm): 1000
Ã? bushings axis (mm): 100
Ã? maximum turning diameter (mm): 2000
Made in: Germany
Comments: Heavy duty facing lathe directly builded out in working order, 1800mm jaw chuck, old but tidy machine
1970
4,200 €  
  CZ   request
111928625 107

MURATA WIEDEMANN M-2558-T for sale
CNC Punching Machines


OVERVIEW: Brand: Muratec Model: M-2558-T Application type: Punching Machine type: Turret Punching Machine Availability: Immediately Construction year: 2007 Production hours: 1000 Location: Spain Origin country:  ...
used machine
 
OVERVIEW:
Brand: Muratec
Model: M-2558-T
Application type: Punching
Machine type: Turret Punching Machine
Availability: Immediately
Construction year: 2007
Production hours: 1000
Location: Spain
Origin country: Japan

GENERAL DATA:
Measurements width: 5152 mm
Measurements depth: 5374 mm
Measurements height: 2250 mm
Machine weight: 15000 kg

MAIN DRIVE:
Laserpower: 22 kW

CONTROL UNIT:
Brand: Fanuc
Model: Fanuc CNC

MOVEMENT:
X-AXIS:
Movement: 2550 mm

Y-AXIS:
Movement: 1635 mm

WORKPIECE:
Workpiece x: 2500 mm
Workpiece y: 1525 mm
Workpiece z: 6.35 mm
Workpiece weight: 150 kg

MAX MATERIAL THICKNESS:
Steel: 6.35 mm

TOOLS:
No. of stations: 68

MEDIA:
Main electronic connection: 220 V
Power consumption: 23 kVA

ADDITIONAL EQUIPMENT:
1- 50 Punches (approximately)
2007
Price  
  ES   request
111928624 107

FINN-POWER E 5 Ui for sale
CNC Punching Machines


OVERVIEW: Brand: Finn-Power Model: E 5 Ui Application type: Punching Machine type: Turret Punching Machine Availability: Immediately Construction year: 2004 Production hours: 39000 Location: India Origin country ...
used machine
 
OVERVIEW:
Brand: Finn-Power
Model: E 5 Ui
Application type: Punching
Machine type: Turret Punching Machine
Availability: Immediately
Construction year: 2004
Production hours: 39000
Location: India
Origin country: Finland
Delivery time: Immediately

GENERAL DATA:
Measurements width: 5400 mm
Measurements depth: 5400 mm
Measurements height: 2450 mm
Machine weight: 14000 kg

MAIN DRIVE:
Punching force: 200 kN

CONTROL UNIT:
Brand: Siemens

MOVEMENT:
X-AXIS:
Movement: 2500 mm

Y-AXIS:
Movement: 1250 mm

MAX MATERIAL THICKNESS:
Steel: 16 mm
Stainless steel: 10 mm

TOOLS:
No. of stations: 50
No. of index: 5
Max punching diameter: 88.9 mm

MEDIA:
Main electronic connection: 400 V
Power consumption: 25 kVA
Air pressure: 6 bar
2004
Price  
  IN   request
111928619 103

TONGTAI TMV-510A for sale
CNC Milling Centers


OVERVIEW: Brand: Tongtai Model: TMV-510A Application type: Milling Machine type: Machining Center Availability: Immediately Construction year: 2012 Production hours: 5000 Location: Spain Origin country: Taiwan  ...
used machine
 
OVERVIEW:
Brand: Tongtai
Model: TMV-510A
Application type: Milling
Machine type: Machining Center
Availability: Immediately
Construction year: 2012
Production hours: 5000
Location: Spain
Origin country: Taiwan

GENERAL DATA:
Measurements width: 2100 mm
Measurements depth: 1400 mm
Measurements height: 2300 mm
Machine weight: 2500 kg

MAIN DRIVE:
Spindle speed range: 15000 1/min
Tool taper: BT-30

CONTROL UNIT:
Brand: Fanuc
Model: 0i-MD
Interface: With Manual Guide+HPCC+Data server

MOVEMENT:
X-AXIS:
Movement: 510 mm

Y-AXIS:
Movement: 360 mm

Z-AXIS:
Movement: 300 mm

TABLE:
Outer length: 600 mm
Outer width: 360 mm

TOOLS:
Slots in storage: 20

MEDIA:
Main electronic connection: 380 V
Power consumption: 9 kVA
Chip conveyer: yes
Internal cooling: yes

ADDITIONAL EQUIPMENT:
1 - 20-25 cones
2012
Price  
  ES   request
111928610 107

PRIMA INDUSTRIE Rapido 5 for sale
Laser Cutting Machines


3D-Lasercutter Working area: 3200 x 1500 x 600 mm Rotary axes: A 360° continuous B +135° to -135° continuous Adaptive axis +/- 7,5 mm Laser ROFIN SINAR DC035 3500 W Dimensions 6000 x 4100 mm Weight approx. 19 ...
used machine
 
3D-Lasercutter
Working area:
3200 x 1500 x 600 mm
Rotary axes:
A 360° continuous
B +135° to -135° continuous
Adaptive axis +/- 7,5 mm
Laser ROFIN SINAR DC035 3500 W
Dimensions 6000 x 4100 mm
Weight approx. 19 t
2007
Price  
  DE   request
111928596 103

DMG MORI DMC 1035 V eco for sale
CNC Milling Centers


OVERVIEW: Brand: DMG MORI Model: DMC 1035 V eco Application type: Milling Machine type: Machining Center Availability: Immediately Construction year: 2008 Production hours: 10000 Location: Spain Origin country:  ...
used machine
 
OVERVIEW:
Brand: DMG MORI
Model: DMC 1035 V eco
Application type: Milling
Machine type: Machining Center
Availability: Immediately
Construction year: 2008
Production hours: 10000
Location: Spain
Origin country: Poland

GENERAL DATA:
Measurements width: 2607 mm
Measurements depth: 2198 mm
Measurements height: 2650 mm
Machine weight: 3600 kg

MAIN DRIVE:
Spindle speed range: 10000 1/min
Spindle motor power: 9 kW
Tool taper: SK 40

CONTROL UNIT:
Brand: Fanuc
Model: Oi-MC

MOVEMENT:
X-AXIS:
Movement: 635 mm
Working feed: 20000 mm/min
Feed force: 5000 N
Rapid traverse: 30000 mm/min

Y-AXIS:
Movement: 510 mm
Working feed: 20000 mm/min
Feed force: 5000 N
Rapid traverse: 30000 mm/min

Z-AXIS:
Movement: 460 mm
Working feed: 20000 mm/min
Feed force: 2000 N
Rapid traverse: 30000 mm/min

WORKPIECE:
Workpiece z: 720 mm
Workpiece weight: 600 kg

TABLE:
Outer length: 790 mm
Outer width: 560 mm
Number of T-Slots: 4
Distance between slots: 100 mm
Max distance between vertical spindle and table: 720 mm

TOOLS:
Slots in storage: 20
Max weight: 6 kg
Max tool diameter: 30 mm
Max tool length: 300 mm

MEDIA:
Main electronic connection: 400 V
Power consumption: 17 kVA
Air pressure: 8 bar
Lubrication tank: 120 L
Chip conveyer: yes
Cooling pressure: 3.7 bar
2008
Price  
  ES   request
111928411 1300

HONSBERG LAMP, KNOLL, MTM, ABB, KSS for sale
Production Line for Gearbox Casings


Production line includes: (1) Infeed Station: Control through RFID (2) Machining Centre HONSBERG LAMP HSC Mach 500: Year of construction: 2000, number of spindles: 2, number of tables: 2, number of tool slots: 44, voltag ...
used machine
 
Production line includes: (1) Infeed Station: Control through RFID (2) Machining Centre HONSBERG LAMP HSC Mach 500: Year of construction: 2000, number of spindles: 2, number of tables: 2, number of tool slots: 44, voltage: 400V, nominal current: 160A, fuse rating: 250A, number of machines: 2, year of construction machine 2: 2002, including Coolant Plant KNOLL TG 30-24/07 285: Year of construction: 2000, coolant tank volume: 2200l, number of machines: 2, year of construction machine 2: 2002 (3) Portal Control 840 D Powerline (4) Machining Centre HONSBERG LAMP HSC Mach 500: Year of construction: 2000, number of spindles: 2, number of tables: 2, number of tool slots: 44, voltage: 400V, nominal current: 160A, fuse rating: 250A, number of machines: 2, year of construction machine 2: 2002, including Coolant Plant KNOLL TG 30-24/07 285: Year of construction: 2000, coolant tank volume: 2200l, number of machines: 2, year of construction machine 2: 2002 (5) Portal Control 840 D Powerline (6) Spraying Chamber Cleaning Machine MTM SKR 900: Length: 4840mm, width: 3310mm, height: 3265mm, voltage: 400V, connected load: 90kVA, fuse rating: 200A, capacity: Caustic tank: 1000l, rinsing tank: 800l, destimat: 200l, product size: 750x350x353mm, product weight: 30kg max. (7) Loading through Industrial Robot ABB IRB 6600 short arm: Year of construction: 2006, voltage: 400V, fuse rating: 35A, weight: 2t, load capacity: 175kg max., number of axis: 6, including Coolant Plant KNOLL TG 30-24/07 285: Year of construction: 2000, coolant tank volume: 2200l (8) Cleaning Plant MTM Omega 5, product size: 730x350x355mm max., voltage: 400V, fuse rating: 250A, compressed air supply: 7-14bar, capacity: Washing water: 2000l, rinsing 1: 1000l, rinsing 2: 1300l, destimat: 270l, length: 5300mm, width: 2900 2060mm, height: 4670mm (9) Pressure Testing System PAUL KÖSTER: Year of construction: 2001 (10) Measuring Station KOMEG (11) Extraction Station for separation, control and sealing of the products (12) Chip Processing KSS: Year of construction: 2003, voltage: 400V, frequency: 50Hz, connected load: 13kW.
 
Price  
  DE   request
111927429 102

MAZAK Integrex 30 for sale
CNC Turning Machines


Here, we offer a MAZAK INTEGREX 30 CNC turning machine - driven tools -programmable bezel -Y-axis Yi7lrh3m3 Built in 1996 Serial number: 124257 Recording KM63/SK40 40 x tool changer Chuck dia. 315 T-plus contr ...
used machine
 
Here, we offer a MAZAK INTEGREX 30 CNC turning machine - driven tools
-programmable bezel
-Y-axis
Yi7lrh3m3

Built in 1996
Serial number: 124257
Recording KM63/SK40
40 x tool changer
Chuck dia. 315
T-plus control
Main spindle RPM 3500 RPM
Spindle speed 6000 RPM fully functional
Good used condition

The lathe can be visited by appointment like locally and tested.
1996
45,000 €  
  DE   request
111923303 108

TRUMPF KUKA TRUMPF HL506 P LCU for sale
Laser Systems For Welding


Welding cell with robot - Robot KUKA KR 15/2 - Rotary tilt positioner TRUMPF DKP 400 - Control KUKA KRC 1 - Laser source TRUMPF HL 506 P LCU new in 2010 Tilting axis +90° to -90° Rotating axis +190° to -190° W ...
used machine
 
Welding cell with robot
- Robot KUKA KR 15/2
- Rotary tilt positioner TRUMPF DKP 400
- Control KUKA KRC 1
- Laser source TRUMPF HL 506 P LCU new in 2010
Tilting axis +90° to -90°
Rotating axis +190° to -190°
Workpiece weight max. 400 kg
Mean laser power 475 W
Pulse performance 500 - 9000 W
1998
Price  
  DE   request
111910050 110

UBK for sale
Mechanical stage


Almost as good as new. Table top 600 x 350 mm X trail 400 mm Y-way 220 mm Envelope game x 0.05 mm Envelope game Y-axis 0.03 mm
used machine
 
Almost as good as new.
Table top 600 x 350 mm
X trail 400 mm
Y-way 220 mm
Envelope game x 0.05 mm
Envelope game Y-axis 0.03 mm
 
Price  
  DE   request
111759075 101

HURCO VMX 42 T for sale
Universal processing centres


Control Winmax Travel X / Y / Z 1060/610/610 mm Spindle speed 12000 rpm Tool magazine for 40 tools SK40 4th / 5th axis Kitagawa Table size 1270x610 mm
used machine
 
Control Winmax
Travel X / Y / Z 1060/610/610 mm
Spindle speed 12000 rpm
Tool magazine for 40 tools SK40
4th / 5th axis Kitagawa
Table size 1270x610 mm
2013
Price  
  DE   request
111756683 109

HANST TEC FORMAXX T 103 H for sale
Wire Erosion Machine


Working table: 900 x 600 mm Travel distances: X: 600 mm Y: 400 mm Z: 400 mm Distance table / work head: 500 mm Load: workpiece 4000 kg Load: Electrode 80 Kg Working container: Width: 1070 mm Depth: 72 ...
used machine
 
Working table: 900 x 600 mm
Travel distances:
X: 600 mm
Y: 400 mm
Z: 400 mm
Distance table / work head: 500 mm
Load: workpiece 4000 kg
Load: Electrode 80 Kg
Working container:
Width: 1070 mm
Depth: 720 mm
Height: 500 mm
Generator: current values 60 A
Machine dimensions: 2450 x 2900 x 2940 mm
Machine weight: 4000 Kg
C-axis
C box for carbide machining
Tool changer with 6 position
Automatic Toolholder Type Erowa ER-007521
2001
Price  
  CZ   request
111714968 102

MAIER MLK32 DY for sale
LATHE CNC


The machine is in good technical condition, after agreement possibility of testing. System 1-. Main spindle Transitionsspindel max D 32 mm spindle in the spindle 220 mm max maximum speed 6000 U / min on the main spindle  ...
used machine
 
The machine is in good technical condition, after agreement possibility of testing. System 1-. Main spindle Transitionsspindel max D 32 mm spindle in the spindle 220 mm max maximum speed 6000 U / min on the main spindle 100% / 60% ED of 3.7 / 5,5 kW clamping system to lead 145 E. Case 22001 2 system. Gear spindle spindle max D 32 mm maximum speed of 6000 U / min on the main spindle of 100 / 60% ED of 3.7 / 5.5 kW clamping system 145 E system 3 - front runner number - 4 Z the powered - 4 output on the main spindle of 100 / 60% ED of 1.1 / 5.5 kW machines dimensions 2,300 x 1,500 x 1,900 mm weight of machine 3,800 kg tool instead of linear cross tool slide of the main spindle : - Rotational stations 16 5 x 16 mm - 4 powered spindles stations including feedback processing - slide 4 driven tools options: Y2 - axis with driven tools 6 + 3 seats instrumental work space on the opposite side: rear slide - 4 power plant Accessories: feeder rods FMB 5-55 / 3200, 140 bar high pressure pump with a filtration paper and cooling systems HYFRA
2007
Price  
  CZ   request
111576649 103

MULTICAM 103 for sale
Copy Milling Machines


OVERVIEW: Brand: MultiCam Model: 103 Application type: Milling Machine type: Copy Router Availability: Immediately Construction year: 2008 Location: Spain Origin country: EEUU GENERAL DATA: Measurements width ...
used machine
 
OVERVIEW:
Brand: MultiCam
Model: 103
Application type: Milling
Machine type: Copy Router
Availability: Immediately
Construction year: 2008
Location: Spain
Origin country: EEUU

GENERAL DATA:
Measurements width: 3400 mm
Measurements depth: 2000 mm
Measurements height: 1500 mm
Machine weight: 700 kg

MAIN DRIVE:
Spinde motor power: 2 kW
Tool taper: ER25

CONTROL UNIT:
Brand: MultiCam
Model: Controller

MOVEMENT:
X-AXIS:
Movement: 1270 mm
Working feed: 190 mm/s
Rapid traverse: 190 mm/s

Y-AXIS:
Movement: 2540 mm
Working feed: 190 mm/s
Rapid traverse: 190 mm/s

Z-AXIS:
Movement: 150 mm

WORKPIECE:
Workpiece x: 1270 mm
Workpiece y: 2540 mm
Workpiece z: 150 mm

TABLE:
Outer length: 1270 mm
Outer width: 2540 mm

MEDIA:
Main electronic connection: 380V
2008
Price  
  ES   request
111576644 209  

HUNDEGGER K3i for sale
Joinery machine


Fully automated joinery on algae Hundegger K3i 5-axis Machining width 625 mm Fojtnco2 Frame extension right 14,76 m
used machine
 
Fully automated joinery on algae Hundegger K3i
5-axis
Machining width 625 mm
Fojtnco2
Frame extension right 14,76 m
2008
Price  
  DE   request
111576434 103

MINI TECCAM 8070 for sale
Copy Milling Machines


OVERVIEW: Brand: Mini Teccam Model: 8070 Application type: Milling Machine type: Copy router Availability: Immediately Construction year: 2012 Location: Spain GENERAL DATA: Machine weight: 260 kg MAIN DRIVE ...
used machine
 
OVERVIEW:
Brand: Mini Teccam
Model: 8070
Application type: Milling
Machine type: Copy router
Availability: Immediately
Construction year: 2012
Location: Spain

GENERAL DATA:
Machine weight: 260 kg

MAIN DRIVE:
Number of spindle: 1
Spindle motor power: 2.2 kW

MOVEMENT:
X-AXIS:
Movement: 700 mm
Working feed: 12 m/mm
Rapid traverse: 30 m/mm

Y-AXIS:
Movement: 800 mm
Working feed: 12 m/mm
Rapid traverse: 30 m/mm

Z-AXIS:
Movement: 90 mm

TABLE:
Outer length: 700 mm
Outer width: 800 mm

MEDIA:
Main electronic connection: 230 V
2012
Price  
  ES   request
111576414 101

STARRAG HECKERT CWK 630 for sale


Control Siemens 840 D Size 630630 mm Stroke x axis 1000 mm Stroke Y-axis 750 mm Traverse path Z-axis 835 mm Round table 360 x 1 ° HSK 100 Tool stations 60
used machine
 
Control Siemens 840 D
Size 630630 mm
Stroke x axis 1000 mm
Stroke Y-axis 750 mm
Traverse path Z-axis 835 mm
Round table 360 x 1 °
HSK 100
Tool stations 60
2001
Price  
  DE   request
111338520 101

DECKEL MAHO DMG DMU 50 eco for sale
Universal processing centres


control Heidenhain iTNC620 travel X/Y/Z 500/450/400 mm spindle speed 10000 1/min tool magazine for 30 tools SK40 B-/C- axis swivel / rotary table internal coolant Renishaw touch probe-Kit chiop conveyor
used machine
 
control Heidenhain iTNC620
travel X/Y/Z 500/450/400 mm
spindle speed 10000 1/min
tool magazine for 30 tools SK40
B-/C- axis swivel / rotary table
internal coolant
Renishaw touch probe-Kit
chiop conveyor
2013
Price  
  DE   request
110943840 109

MITUTOYO QVT1-X302PIL-C for sale
Measuring Machines


OVERVIEW: Brand: Mitutoyo Model: QVT1-X302PIL-C Application type: Measuring Machine type: Measuring Machine Availability: Immediately Production year: 2011 Production hours: 750 Location: Germany Origin country: ...
used machine
 
OVERVIEW:
Brand: Mitutoyo
Model: QVT1-X302PIL-C
Application type: Measuring
Machine type: Measuring Machine
Availability: Immediately
Production year: 2011
Production hours: 750
Location: Germany
Origin country: Japan

GENERAL DATA:
Measurements width: 859 mm
Measurements depth: 951 mm
Measurements height: 1609 mm
Machine weight: 360 kg

MAIN DRIVE:
Camera: High-sensitivity CCD camera B&W
Illumination: Surface-White LED, Contour-White LED, Programmable Ring Light-White LED
Resolution: 0.0001 mm

CONTROL UNIT:
Brand: MiCat
Model: QVPAK
Release: 11.101
Remote control: yes

MOVEMENT:
X-AXIS:
Movement: 300 mm
Accuracy: E1x1-(1.5+3L/1000) µm
Working feed: 300 mm/s
Largest measuring error: -0.761 µm

Y-AXIS:
Movement: 200 mm
Accuracy: E1y2-(1.5+3L/1000) µm
Working feed: 300 mm/s
Largest measuring error: 0.488 µm

Z-AXIS:
Movement: 200 mm
Accuracy: E1z3-(1.5+4L/1000) µm
Working feed: 300 mm/s
Largest measuring error: -0.982 µm

X-Y-PLANE:
Accuracy: E2xy4-(2+4L/1000) µm
Largest measuring error: 1078 µm

X-Y-PLANE (DIAGONAL 1):
Accuracy: E2xy4-(2+4L/1000) µm
Largest measuring error: 1078 µm

X-Y-PLANE (DIAGONAL 2):
Accuracy: E2xy5-(2+4L/1000) µm
Largest measuring error: 1326 µm

WORKPIECE:
Workpiece z: 200 mm
Workpiece weight: 20 kg

TABLE:
Outer length: 399 mm
Outer width: 271 mm

MEDIA:
Main electronic connection: 230V / 50Hz

ADDITIONAL EQUIPMENT:
1- QVPAK Software
2- 1x lens 02AKT300 HR2,5x
3- 1x lens 02AKT250 HR1x
4- 1x Renishaw TP 200 Probe Kit
5- 2x Fastening bracket
2011
Price  
  DE   request
110943796 101

STAMA MC 530 for sale
Numerically Controlled Machining Centres


Machining center - vertical STAMA MC 530 L-Nr. 1105-02285 make STAMA type MC 530 year 1997 State second-hand machine control CNC storage Metzingen country of origin Germany delivery immediately cargo base stock technical ...
used machine
 
Machining center - vertical STAMA MC 530 L-Nr. 1105-02285 make STAMA type MC 530 year 1997 State second-hand machine control CNC storage Metzingen country of origin Germany delivery immediately cargo base stock technical details x way 800 mm y-way 400 mm z-way 350 mm overall power demand 35 kW machine weight 6.5 tons of space approximately m description CNC vertical machining center
with maximum productivity and accuracy, type MC 530
Year of construction 1997

TECHNICAL DATA:

Cutting carriage travel along X-axis 800 mm
Milling travel across Y-axis 400 mm
Milling head off vertical Z axis 350 mm

Height under vertical spindle approx. 350 mm
Spindle retainer for SK 40
Stfl spindle speeds. adjustable 36-.10.000 U/min
Feeds all 3 axis 1-10,000 mm / min
Rapid feed 40,000 mm / min

Spindle drive 21 kW
Total drive 35 kW - 380 V - 50 Hz weight CA 6 tons

Optional accessories:

CNC path control FANUC type 16 in the, with screen and direct input and various subprograms, tool corrections, tool monitoring, Parallellprogrammierung uva.mehr

automatic tool magazine with 40 tool posts, 125 x 300 lg.
Tools with internal cooling, with its own tool data management, chip-to-chip 4 sec.

Installed complete encapsulation of the workroom, chip conveyor,.
Several collets, milling spindle, no tools

Very stable machine.
1997
25,900 €  
  FR   request
110943776 101

ENSHU GE590H for sale
Numerically Controlled Machining Centres


BT50 tool fitting, spindle KW 30/25, automatic tool changer with magazine for 80, pallets 800 x 800 mm, automatic pallet changer 2x, inner coolant supply 40 bar, chip conveyor, transformer, min. pallet indexing 0.001° ( ...
used machine
 
BT50 tool fitting, spindle KW 30/25, automatic tool changer with magazine for 80, pallets 800 x 800 mm, automatic pallet changer 2x, inner coolant supply 40 bar, chip conveyor, transformer, min. pallet indexing 0.001° (B axis), control expansion pack 3D, additional CS axis, Work room flushing, media supply range (8 ports)
2012
Price  
  DE   request
110942377 101

MORI SEIKI NZ2000T3Y3 for sale
Numerically Controlled Machining Centres


incl. holding brake for C-axis main and sub spindle · incl. cylinder for main and sub spindle · incl. clamping device for main and sub spindle · incl. double foot switch with protection cover main and sub spindle · i ...
used machine
 
incl. holding brake for C-axis main and sub spindle · incl. cylinder for main and sub spindle · incl. clamping device for main and sub spindle · incl. double foot switch with protection cover main and sub spindle · incl. hinge belt conveyor discharge right and then backwards · incl. coolant system with increased pressure 35 bar 2 revolver · incl. Coolant liquid cooling · incl. bar loader Irco ILS RBK 10016 · inc. unloader for Irco ILS REX · including I/F for bar loader· including I/F for unloader · incl. integrated, traverse workpiece - unloading system with gripper for main and sub spindle· incl. scale X 1 · incl. scale X 2 · incl. scale X3 · incl. transformer KVA95 · incl. documentation (if applicable)
2011
Price  
  DE   request
110936542 101

MORI SEIKI NT4250DCG 1500/SZ for sale


Clamping fixture Kitagawa · double foot switch with protection hood for main- and subspindle · tool shank execution CAPTO C6 for turning-milling spindle · chain tool magazine with 40 panels · boost the indexing B ...
used machine
 
Clamping fixture Kitagawa · double foot switch with protection hood for main- and subspindle · tool shank execution CAPTO C6 for turning-milling spindle · chain tool magazine with 40 panels · boost the indexing B-axis to 0.0001° I/F for high pressure coolant system 70 bar · Restock specification for opposed spindle · compressed air exhaust system for Chuck (main spindle) and tool cutting (turning-milling spindle) · automatic Door · fast fixed cycles · transformer 95 kVA · signal lamp with 3 lights · manual tool preset in the machine for 1st and 2nd spindle
2008
Price  
  DE   request
110924351 101

MORI SEIKI NT4300 DCG/1500SZ for sale


Boost the possible Indexing of B-axis at 0.0001° · incl. chain tool magazine with 40 panels (Capto C6 with plane surface) · I/F for high pressure coolant system 70 bar · double foot switch with protection hood for  ...
used machine
 
Boost the possible Indexing of B-axis at 0.0001° · incl. chain tool magazine with 40 panels (Capto C6 with plane surface) · I/F for high pressure coolant system 70 bar · double foot switch with protection hood for main- and subspindle · clamping fixture Kitagawa B-212 for main- and subspindle · manual tool presetter in the machine for 1st and 2nd spindle · hinge belt conveyors · transformer · restarted · fast fixed cycles · air bubbles spindle 1· Air bubbles spindle 2 bubbles Milling spindle· signal lamp with 3 lights
2008
Price  
  DE   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Find used machinery dealers in your country