We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Two-jaw chuck, 2 jaw chucks, vice, face plate -centric: exciting -Chuck size: Ø 242 mm -Rezess: Ø 190 mm -Hole circle: Ø 215 mm -Weight: 26.4 kg
used
Rotary table, rotary indexing table, dividing head, dividing head -Three-jaw chuck: Ø 140 mm -Height: 185 mm -Max. 8 divisions can be set -Bore center: Ø 35 mm -Weight: 30 kg
used
Three-jaw chuck, three-jaw lathe chuck -clamping plate -Chuck size: Ø 240 mm -Bore: Ø 75 mm -Weight: 30 kg
used
Rotary table, rotary indexing table, dividing head, dividing head -Three-jaw chuck: Ø 190 mm -Height: 320 mm -Bore center: Ø 57 mm -Rotary table: swiveling -Dimensions: 360/310/H320 mm -Weight: 64 kg
used
Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 57 mm -Weight: 19 kg
used
diameter: 315 mm weight: 36 kg : ID 105 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Rotary table with 3-jaw chuck PAGUS Ø 250 mm Table height: 170 mm groove width 12 mm used, tested ! Dimensions: 350 x 300 x 170 mm
Fmax 6000 daN, nmax 4000 min-¹ External 250 mm, Centering 220 mm, DIN 6353 Size 8, Thread M30 Guide pin 100
used
Description: Consisting of 5 pieces Diameter: 250 mm, 240 mm, 160 mm, 160 mm and 200 mm Approx. Onsite Dimension. (l x w x h): 800 x 600 x 200 mm, weight approx.: 100 kg
used
Description: Consisting of 3 pieces Diameter: 200 mm, 250 mm and 250 mm Also various clamping jaws Approx. Onsite Dimension. (l x w x h): 800 x 600 x 150 mm, weight approx.: 90 kg
used
Description: A total of 3 jaw chucks including clamping jaws, different diameters , weight approx.: 70 kg, Approx. Onsite Dimension. (l x w x h): 600 x 400 x 300 mm
used
Description: Four pieces , Diameter from 160 to 250 mm weight approx.: 50 kg, Approx. Onsite Dimension. (l x w x h): 800 x 600 x 200 mm
used
Description: Six pieces , Diameter from 190 to 315 mm weight approx.: 100 kg, Approx. Onsite Dimension. (l x w x h): 600 x 350 x 200 mm
used
Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set for four-jaw chucks, hard -Jaw width: 34 mm -Dimensions: see photo techn. drawing -Total dimensions: 130/136/H80 mm -Total weight: 7,0 kg
used
Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set for four-jaw chucks, hard -Jaw width: 32 mm -Dimensions: see photo techn. drawing -Total dimensions: 125/130/H70 mm -Total weight: 5.4 kg
used
Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set for four-jaw chucks, hard -Jaw width: 32 mm -Dimensions: see photo techn. drawing -Total dimensions: 140/130/H190 mm -Total weight: 14 kg
used
Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set for four-jaw chucks, hard -Jaw width: 32 mm -Dimensions: see photo techn. drawing -Total dimensions: 120/130/H85 mm -Total weight: 6,2 kg
used
Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set for four-jaw chucks, hard -Jaw width: 32 mm -Dimensions: see photo techn. drawing -Total dimensions: 140/130/H95 mm -Total weight: 7,8 kg
used
diameter 200mm, little used, dusted, good condition.4 Bolts with bolt spacing approx. 94mm, Hole circle diameter of the bolts approx. 133mm, the largest diameter of the short cone approx. 106mm, Drawbar in the middle. All information to the best of our knowledge but without any information. Special price
used
Two-jaw chuck, 2 jaw chucks, vice, face plate -exciting: centric -Chuck size: Ø 200 mm -Weight: 19 kg
used
Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 160 mm -exciting: centric -Interchangeable jaws: soft -Taper cone: Ø 105 mm -Hole circle: Ø 135 mm -Weight: 18 kg
used
Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 250 mm -exciting: centric -Interchangeable jaws: soft -Weight: 22 kg
used
Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 125 mm -exciting: centric -without interchangeable jaws: without -Weight: 4 kg
used
Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 125 mm -exciting: centric -Interchangeable jaws: soft -Taper cone: Ø 82 mm -Hole circle: Ø 105 mm -Weight: 14 kg
used
Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 125 mm -exciting: centric -Interchangeable jaws: soft -Weight: 6 kg