We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Plasma cutting machine make THERMAL-ARC type PAK 5 XRFabr. -No: 183247 / EO2016APower: 26/18 ARated power: 55A at 100VWith- Burner- hose packageusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
cutting range for steel to: 76 mm capacity at 100%: 51 mm cutting medium: 400 Amp regulated drive: 50-150 und 100 - 400 AmpSteuerSteuer control voltage: 24 Volt weight of the machine ca.: 750 kg dimensions of the machine ca.: 82 x 122 x 930 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Extraction machine for taps -Handover in the current condition as seen -Current consumption: too high, machine as spare parts carrier -Manufacturer: Electro ARC, extraction machine for taps or similar tools -Clamping table: 660 x 460 mm -Outreach: 250 to 480 mm -Columns Ø: 70 mm -Dimensions: 930/780/H2045 mm -Weight: 402 kg
used
Plasma hose package, welding torch, MIG/MAG torch, plasma cutter, plasma lamp -Manufacturer: Thermal Arc Dual Flow Torch -Model: PCM52 -Length: 7.75 m -Dimensions: 560/480/H100 mm -Weight: 5.2 kg
used
Weber, Masch. No. 1109226, orbital riveting machine with RT-stand Motor M 631 / 4 0.18 kW 1360 RPM KMT - APK T-3-S-60-Z SN 307 89 01 Riveting time - adjustable 0.15-3 s Control - Siemens Simatic S 7-200 External dimensions 30 x 20 x 86 cm - riveting machine Panel 50 x 40 x 30 cm More info and details. Photos upon request I am retailer offers to similar machines interested in financing through leasing or hire-purchase request send data protection
used
Compressed air supply: 6-8bar, connected load: 30kVA, length: 3280mm, width: 4820mm, height: 2385mm, weight: 2t, operational hours counter: 485h, with documentation.
used
table length: 590 mm table width: 590 mm table load: 200 Kg table turning speeds: 0,23 - 2,3 U/min table height: 650 mm total power requirement: 0,55 kW weight of the machine ca.: 600 Kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
table diameter: 450 mm table load: waagerecht 300 Kg table load: senkrecht 150 Kg table turning speeds: 0,2- 2 U/min voltage: 230 V / 50 Hz total power requirement: 0,55 kW weight of the machine ca.: 80 KG dimensions of the machine ca.: 0,65 x 0,5 x 1,0 m • unused stock machine • manual tilt adjustment • Start-Stop by foot switch • with CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Welding turntable make ART Welding type AP 6Serial -No: 2016066 Year 2016Technical specifications:Load capacity: 600 kgWorking table diameter: 800 mmTilt Angle:-95° / +15°Tilting speed: 0.35 rpm.Speed: 0.09 - 0.9 rpm.Drive power: 1.5 kWWeight approx.: 700 kgDimensions approx.: 1100 x 570 x 1300 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Railings and grilles of 500 mm -1200 mm in height can be chiseled and 3800 mm in length. the grid can be rotated to any angle to shit.
used
Pallet with welding electrodes and welding wire approx. 1,000 kg total Net price 400,00 E
used
max center distance: 3000 mm One driven unit One non-driven unit Both units are movablenbsp; max swing: 1850 mm
used
200 WATT Laser Welding Machine Machine can be seen in working condition
used
Fronius magicwave 2600, with wire feeder can be used for the robot welding. Machine is in great working condition, equipped with longines controls, wire feeder and welding gun connections for the robots.
used
weight max.: 20 t workpiece diameter: 300 - 3600 mm Turning speed: 70 - 1200 mm/min roll diameter: 350 mm Wheel width: 110/175 mm total power requirement: 3 kW weight of the machine ca.: t dimensions of the machine ca.: 2,5 x 1,5 x 1,0 m • demonstration unit • unused vessel turning unit, • with steel rolls, manual adjustable roller spacing, • one roller unit with twin drive with variable adjustable rotational speed, • one roller unit without drive. • CE-marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
weight max.: 5 t workpiece diameter: 150 - 1800 mm Turning speed: 70 - 1200 mm/min roll diameter: 250 mm total power requirement: 1 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,8 x 1,5 x 1,0 m • demonstration unit • unused vessel turning unit, • with rubberised rolls, manual adjustable roller-spacing, • one device with twin drive with adjustable rotational speed. • with CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
weight max.: 3 t workpiece diameter: 120 - 1500 mm Turning speed: 0,6 - 1000 mm/min roll diameter: 250 mm total power requirement: 0,5 kW weight of the machine ca.: 0,6 t dimensions of the machine ca.: 1,4 x 1,5 x 1,0 m • demonstration unit • unused vessel turning unit, • with rubberised rolls, manual adjustable roller-spacing, • one device with twin drive with adjustable rotational speed. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Welding robotic set The robotic welding set consists of two separate workplaces. Each workplace has its own controls start and stop of the work cycle and own safety features. Technical parameters: ⢠FANUC ARC MATE 100iC 12S industrial robot with a reach of 1098 mm ⢠2x single-axis positioner with FANUC counter bearing capacity 1000 kg ⢠Robot on track ⢠Safety optical barriers REER ⢠Safety steel fencing ⢠Welding source MIG/MAG Migatronic Sigma Select 400 A ⢠ABICOR-BINZEL 500 A water-cooled welding bundle and torch ⢠ARC-TOLL software ⢠Search by wire - Touchsensing ⢠Automatic path correction - Tap Delivery contents: ⢠Complete robotic workplace, including assembly and commissioning at the customers site ⢠Two-day training for operation and programming
used
Welding table 3000 x 1500 mm
used
Used drum mixer made by ,,IWS” INOX WELDING SERVICES, 1000 L capacity. Stainless steel. New: 2022 Drum mixer for bulk and granular materials. 2 pieces available.
used
surface area: 2,5 x 5 meter weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams
used
surface area: 5 x 5 meter two sections of 5 x 2,5 meter which can be bolted together weight of one section: 3,6 ton structure consists out of IPE 500 amp; IPE 600 beams
used
Used 2915 Litre / 641 Gallon Stainless Steel Mixing Ice Crushing Tank / Vessel - Stock Ref: CB3511 Manufacturer: Walts welding Inc Fl Connections: TOP 1 x Hatch (400x200mm) 1 x Mild steel beam bridge mounted mixer: 230/460v motor; 7.5hp, 3 phase, 60Hz, 1730rpm Grove Gearbox Model: H525-240:1 Reduction giving approx.20rpm 2 x 3" ISS male inlets SIDE 1 x Hopper access pipe 600mm Diameter 1 x 1½" nb tube vent / overflow 2 x 1 ½" BSP socket, steam pipe 1 x 4" flange outlet Tank supported on 4-off S/S tube legs with foot plates.
used
Used 2915 Litre / 641 Gallon Stainless Steel Mixing Ice Crushing Tank / Vessel - Stock Ref: CB3511 Manufacturer: Walts welding Inc Fl Connections: TOP 1 x Hatch (400x200mm) 1 x Mild steel beam bridge mounted mixer: 230/460v motor; 7.5hp, 3 phase, 60Hz, 1730rpm Grove Gearbox Model: H525-240:1 Reduction giving approx.20rpm 2 x 3" ISS male inlets SIDE 1 x Hopper access pipe 600mm Diameter 1 x 1½" nb tube vent / overflow 2 x 1 ½" BSP socket, steam pipe 1 x 4" flange outlet Tank supported on 4-off S/S tube legs with foot plates.
used
E-welder ESAB type LTG 250 Rod electrode welder Masch. No. 736-820-387 Year of construction 1997 Power 250 Amp. = 35 % ED 190 Amp. = 60 % ED 150 Amp. = 100 % ED Power adjustment: infinitely variable - electrode holder with 6 meters connection cable - DC fan - air cooling - possibly also TIG welding possible, without hose package Mains connection 380 Volt, 50 Hz, 32 Amp. Plug Space requirement L x W x H 1200 x 750 x 1050 mm Weight 180 kg good condition Device was originally also designed for TIG welding. The hose package for TIG welding is not available and the function has not been tested. The water cooling was for the hose package for TIG welding. The device is therefore sold only as an electrode welding machine.; used