used ALU Clamping Cubes

Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: clamping aid -clamping plate -Chuck size: Ø 255 mm -Weight: 20 kg

Clamping plate, welding table, straightening plate, T-slot plate -3D welding and work table -in aluminum for stainless steel processing -for positioning and finish welding with T-slot system -Support area: 1000x1000 mm -2x pneumatic clamping cylinders with ground connection -Width: 1000 mm -Depth: 1400 mm -Height: 1300 mm

Clamping plate, plate field, aluminum plate, -Clamping plate: made of aluminium, with threaded holes -Plate thickness: 25 mm -Threaded holes: M12 distance 100 mm -Dimensions: see photo techn. drawing -Total dimensions: 1290/800/H120 mm -Weight: 65 kg

Clamping plate with pneumatic cylinder, centering table, centering device, plate field, welding table, welding table, plate boring machine -Clamping plate with: 24 pneumatic cylinders -Material: aluminum -Width: 775 mm -Table length: 1600 mm -Height: 180 mm -Dimensions: 1600/775/H180 mm -Weight: 250 kg

75.0 kW, max. 10 bar, 10.40 m3/min.

75,0 kW, max. 10,0 bar, 10,40 m3/min.

132,0 kW, max. 8,50 bar, 23,81 m3/min.

90.0 kW, max. 10.0 bar, 14.03 m3/min.

90.0 kW, max. 9.0 bar, 14.39 m3/min. In very good condition.

Alup Compressor SCR 30 - Height: 125cm - Width: 125cm - Depth: 75cm - Weight: 600kg Good condition fully functional can be visited and tried out on site. Shipping abroad. Bilopzitsev Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time at the telephone number below. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

Qty. 1 Second-hand 8” logs furnace Mfc.: Tecalex Aluminium Technology Built: 2014 Capacity: 4000 kg/h Consist of: Furnace frame Refractory insulation Burner areas Log guiding system Air-gas piping Air supplying fan Thermocouples Fumes exhaust and recirculation fan Furnace exit door Pneumatic system (for the thermocouples and the door cylinders) Nominal production capacity: 4000 kg/h Log diameter: 8” – 203 mm Zones of burners (nº of thermocouples) Nº 4+2 Thermal nominal power installed: 1440 kW Electric nominal power installed: 35.5 kW Max. temperature: 510 °C Dimensions: 16250 x 2400 x 3200 mm – L x W x H UNITS VALUES N° of burners 187 N° of pilot flames 12 Maximum consumption of natural gas ( 36MJ/Nm3 ) Nm³/h 147 Maximum consumption of propane ( 97MJ/Nm3 ) Nm³/h 61

Technical data in image

ROLLER CONVEYOR FUR ALUMINUM SAW -Length 300 cm -Breedte rollenbaan 300 mm -Lengteaansla DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Qty. 1 Second-hand polishing machine Mfc.: Madar Aluminium Built: 2010 Type: PM 2000 Overhauled: No, but the machine was very rarely used. Operation length: 7000 mm Operation width: 800 mm Profile thickness (workpiece thickness): 10 mm up to 200 mm Polishing drive: 2 x 25 kW including converter (Lenze) Power total: 65 kW Siemens PLC system & touchscreen: PLC -SIEMENS S7200 Touchscreen - SIEMENS TOUCH PANEL TP177MICRO ( 1P 6AV6 640-0CA11-0AX0)

PRESS FOR PRODUCTION ALUMINIUM TRAYS FOR ALIMENTARY USE COMPLETE WITH DOUBLE IMPRESSION MOULD-1100 CC. COMPOSED OF: A LUBRICATION UNIT 4-COLUMN MOLDING UNIT TOW-SCRAP CONTROL PANEL. 55 STROKES/MINUTE DEPENDING ON THE MOULDS. PASS COLUMNS FOR MOULDS UP TO 800 MM

PRESS FOR PRODUCTION ALUMINIUM TRAYS FOR ALIMENTARY USE COMPLETE WITH DOUBLE IMPRESSION MOULD-1100 CC. COMPOSED OF: A LUBRICATION UNIT 4-COLUMN MOLDING UNIT TOW-SCRAP CONTROL PANEL. 55 STROKES/MINUTE DEPENDING ON THE MOULDS. PASS COLUMNS FOR MOULDS UP TO 800 MM

Flow rate m3/min: 12.90 Working pressure max bar: 8 Main motor kW: 75 Weight Kg: 1750 Overhauled: Yes Refrigeration dryer MTA - DE 140 - CE 2009 TECHNICAL DATA: Refrigeration compressed air dryer Refrigerant: R134a Refrigerant filling Kg: 2,350 Maximum pressure bar: 16 Total power KW: 3.60 Weight Kg: 293

Aluminum table, aluminum work table -Execution: stable -Ground floor: 1 -Plastic panels -tray -Dimensions: 1800/700/H820 mm -Weight: 60 kg

Shelf trolleys, transport trolleys, assembly trolleys -Length: 1600 mm -Depth: 860 mm -Height: 1670 mm

Machine Type: Screw Air Compressor Manufacturer: Alup Type: Allegro 30/SO Year of construction: 2002 Condition: used / good **Offer will only be sent if a complete imprint is provided!** Price VB Location Warstein , Germany Reference M-ALU-1123-1 DESCRIPTION We offer you a used screw compressor from the manufacturer Alup. Specifications Flow rate 0.73-6.05 sqm/min Motor speed 1000-6000 Max. pressure 5-13bar Motor power 30KW Approximately 112,000 hours/device has always been serviced. Last maintenance 03/2023 Availability: from January 2024 Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the description ...

ALUWIL ST 3000 roller blind cutting table built in Poland in 2019 (implemented in production in 2022) offers the best combination of speed and precision in cutting thick materials. The fabrics arranged on a large working area are machined by an under-top mounted cutting blade with forward and reverse feed control via ALLEN-BRADLEY touchscreen HMI panel. Once the cut is complete, the knife automatically returns to its initial setting, followed by the release of the bilateral pneumatic hold-downs that hold the fabric. The ALUWIL ST-3000 fabric cutting table is also distinguished by its highly rigid steel-aluminium construction and extensive equipment, including a feed bar, fabric end detection sensor and measuring stop. The ALUWIL cutting table weighs 380 kg. Technical data of the ALUWIL ST 3000 fabric cutting machine - work area (L x W): 2800 x 2850 mm - circular cutting blade - fab ...

Сompressor technical data: Power, cubic meters 10,2 Max. pressure, atm 10 Power, kW 75 Overall dimensions., Mm 1610x850x1355 Weight, kg 1050

Aluminum underfloor circular saw make unknownTechnical specifications:Saw blade diameter: 400 mmCutting heightExternal dimensions L x W x H: 1050 x 930 x 1700 mmWeight: 342 kgWith- 2 pneumatic vertical clamps- protective hood- foot switchusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Alu Folding knife head 125x50x30 Speed: n= 6000 - 10300 rpm Carbide knives G&-4979-M3A6J

Machine for the completion of insulation strip assembly Manufacturer: Aluro Type: BTM 100908-190 Year of construction: 2005 Location: Zweibrücken - Roll-in below 90° in 1 pass - Separately adjustable retaining castors - 4x2 horizontal retaining castors at the top and bottom with Vulkollan coated surfaces - Correction for the straight alignment of the profiles - Stop with safety switch - Display of position and pressure with display, correction of mechanical deformation after roll-in We will be happy to send you further information on request.