british flag
Resale Logo

Air used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information used machinery for the dewatering market   REWA Gruppe  http://www.rewa-gruppe.de 
banner logo
start page > keywords Air > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125828718 1300

SULFURIC ACID PLANT 1500 MT New Surplus for sale
other machines


Sulfuric Acid Plant (Sulphuric Acid ) 1500 MT, 50 HZ, New Surplus The equipment for this plant is still packed in the manufactures shipping crates and has never been unpacked. The plant is stored in a secure climate con ...
new machine
 
Sulfuric Acid Plant (Sulphuric Acid ) 1500 MT, 50 HZ, New Surplus
The equipment for this plant is still packed in the manufactures shipping crates and has never been unpacked. The plant is stored in a secure climate controlled warehouse and is being kept as per manufactures guidelines. Brief outline of some of the equipment included, 23 MW GE Thermodyn Condensing Steam Turbine Generator, Converter, Hot Inter Pass Heat Exchanger, Cold Inter Pass Heat Exchanger, Steam injection vessel, Duct transition pieces, Main Blower, Air Inlet Filter, Drying Tower (DT), DT Mist Eliminators, DT Acid Distributor System, DT Support for Packing, HRS Steam Separator, Steam Injection Exhaust Head, Heat recovery Tower(HRT), HRT Mist Eliminators Demister, HRT Acid Distributor System (stage 2)HRT, Support for Packing (stage 2), HRT Acid Distributor System (stage 1), HRT Support for Packing (stage 1), Ceramic Insulation Block, Final Absorbing Tower (FAT), FAT Mist Eliminators Demister, FAT Acid Distributor System, FAT Support for Packing, Common Acid Pump Tank, HRS Boiler Package, HRS Blowdown Sample Cooler, HRS Steam Sample Cooler, HRS Blowdown Tank, HRS Boiler ailable due to a cancelled project., HRS Blowdown Tank Exhaust Head, HRS Acid Sample Coolers, HRS Acid Sample Enclosure, HRT Pump boot, HRS Diluter, HRS Heater, HRS Preheater, Liquid Effluent Pump, Steam Injection Sparger, Main Boiler
The Sulfuric Acid Plant is designed to be fed by solid sulfur. The equipment related to handling the solid sulfur was never purchased. However the engineering studies & design were completed and is ready to be requisitioned directly from the supplier if the new owner wishes to make the purchase. The product handled by conveyor is solid Sulphur, with the following characteristics:
Type Dry bulk solid powder
Sulphur > 99.5 % w/w
Inorganic ash < 0.4 % w/w
Carbon < 0.1 % w/w

All the equipment is new and was never installed and therefore, the Process Technology Licence associated with the plant has never been used and can be transferred to the new owner at a very affordable cost.
The guarantee can be provided to the new owner of the plant once the basic engineering of adapting the plant to the new site conditions have been completed.
The new owner of the plant will not have any restrictions on the engineering company they choose to complete the design, construction and commissioning of this plant.
new
Price  
  US   request
125832729 109

COSMAP 2 TR 3/4 C.S.D. for sale
Polishing Automatic


stations: number of slitts: length: mm--------------------------------------------------: ELECTRICAL SPECIFICATIONS: - mains voltage: 380 V- mains frequency: 50 HzThe equipment includes:autorotor table  ...
used machine
 
stations:
number of slitts:
length: mm
--------------------------------------------------:
ELECTRICAL SPECIFICATIONS:
- mains voltage: 380 V
- mains frequency: 50 Hz
The equipment includes:
autorotor table TR35 - 03 - 270°
table reductor MVR 7 FL1
TABLE MOTOR AUTOF. KW 0.75
N° ROLLS OF THE TABLE N° 6 DIAM 30 MM
CLUTCH SETTING 12
SAFETY FENCE ARGOLUX
TABLE DIAMETER 840 MM
TABLE DECELERATOR 0EM10MB
CONTACT WHEEL DIAMETER 250 MM
DRAWING ROLL DIAMETER 300 MM
IDLE ROLLS DIAMETER 180 MM
STRIP TENSIONER MOTOR KW 2.2
MANDREL TYPE MOTOR DCM3C
MANDREL DRIVE DCD 60
MANDREL ENCODER DIAMETER 15 MM
POSITIONER GROUP CYLINDER STROKE 10 MM
COLUMN MOVEMENT MOTOR KW 0.75
LINE AIR PRESSURE 6 BAR



This ad was created with MODUL MWS - the software solution of LogoTech.
2000
Price  
    request
125823301 201

JET JTS-600XLT for sale
Joiners circular saws


: S6/S1 400V 2.8/1,5 kW Saw blade diameter: 250 mm Blade bore diameter: 30 mm Cutting height 90 ° / 45 °: Max 80 / 54 mm Cutting width: 610 mm Cutting length: 1600 mm Moving: 1600x240mm  ...
new machine
 

: S6/S1 400V 2.8/1,5 kW
Saw blade diameter: 250 mm
Blade bore diameter: 30 mm
Cutting height 90 ° / 45 °: Max 80 / 54 mm
Cutting width: 610 mm
Cutting length: 1600 mm
Moving: 1600x240mm
Slide table stroke: 1700mm
Moving cutting length: 1600 mm
Machine table: 800x350mm
Table extension: 800x270mm
Table extension: 415x350mm
Blade Swivel range: 90-45 °
Speed blade: 4000 RPM
Suction connection diameter: 100 mm
Weight: 170kg
G & JET-100070XLT
new
Price  
    request
125832715 101

DOOSAN DNM 400 II for sale
Machining Center - Vertical


x-travel: 762 mmy-travel: 435 mmz-travel: 510 mmControl: Fanuc i-Series distance spindle nose and table: 150 - 660 mmdistance spindle center to column: 512 mmMain spindle:: turning speed range - main spindle: 80 - 12.00 ...
used machine
 
x-travel: 762 mm
y-travel: 435 mm
z-travel: 510 mm
Control: Fanuc i-Series
distance spindle nose and table: 150 - 660 mm
distance spindle center to column: 512 mm
Main spindle::
turning speed range - main spindle: 80 - 12.000 min/-1
power capacity - main spindel: 18,5 / 15 kW
max. Torque: 117 Nm
tool taper: BT 40
work table::
table surface area: 920 x 435 mm
max. table load: 600 kg
number of T-slots: 4
T-slot - distance: 125 mm
T-slot - width: 18H8 mm
Tool-Presetter::
number of toolpositions: 30 pos.
tool taper: BT 40
max. tool diameter: 80 / 125 mm
max. tool length: 300 mm
max. tool weight: 8,0 kg
change-time tool to tool: 1,3 sec
change-time chip to chip: 3,7 sec
feeds::
rapid traverse ( X / Y / Z ): 36 / 36 / 30 m/min
feed speeds: max. 15.000 mm/min
total power requirement: 30 kVA
weight of the machine ca.: 5,0 t
dimensions of the machine ca.: 3,5 x 3,0 x 2,8 m
Documents:
Chip conveyor:
Coolantsystem:
high pressure coolant: 15 bar
through spindle coolant:
elektr. hand wheel:
Automatic Tool Changer:
spindle oil cooler:
Airblow through center of spindle:
autom. Frontdoor:
Robot connection: Interface
CNC - Machiningcenter Vertical
DOOSAN - DNM 400 II

- Starting-Up in 2017
- TOP-Condition !



This ad was created with MODUL MWS - the software solution of LogoTech.
2016
Price  
    request
125823268 107

TRUMPF TruStore 3030 for sale
Punching Machines


Construction year: 2013 Voltage: 400 V Frequency: 50 Hz Power supply: 13 kVA Electrical requirement: IEC Compressed air connection: 7-14 bar Tragfährigkeit per pallet: 3,000 kg Sheet format: 3.000 x 1.500 mm Dim ...
used machine
 
Construction year: 2013
Voltage: 400 V
Frequency: 50 Hz
Power supply: 13 kVA
Electrical requirement: IEC
Compressed air connection: 7-14 bar
Tragfährigkeit per pallet: 3,000 kg
Sheet format: 3.000 x 1.500 mm
Dimensions: approx. 7.022 x 6.181 mm system height: approx. 4.970 mm
Total storage compartments: 29 seats
Storage compartments 90 mm = 21
Storage compartments 170 mm = 8

Double Tower
Basic module T1 base module T2
Extension module T1 1.6
Extension module T2 1.6

Base and superstructure
/ Out-feed car scissor lift

/ Retrieval cart with scissors lift
Bearing carrier for loading for SheetMaster incl. safety device
CELL-Server (WMS)
2013
Price  
    request
125828875 702

W & P Kegelrundwirker for sale
conical-rounder, fabr. W & P, type CR 87-3


moveable, cap. max. 2000 pcs./h, \r\ndougweightrange approx.. 300 to 1500 g (estimation)\r\nalu - cone, plastic tracks, \r\ninclude fan + hot air

 
moveable, cap. max. 2000 pcs./h, \r\ndougweightrange approx.. 300 to 1500 g (estimation)\r\nalu - cone, plastic tracks, \r\ninclude fan + hot air
 
Price  
    request
125823235 301

ENGEL VICTORY 650/130 TECH for sale
Injection molding machines


The injection molding machine ENGEL VICTORY 650/130 TECH was built in 2004. The machine is designed for the processing of thermoplastics and silicone - a separate aggregate for each type of material. In addition, the fix ...
used machine
 
The injection molding machine ENGEL VICTORY 650/130 TECH was built in 2004. The machine is designed for the processing of thermoplastics and silicone - a separate aggregate for each type of material. In addition, the fixed and movable plate is cooled with water.

Technical data :
- number of hours worked: 70822
- maximum clamping force of tables: 1300 kN
- injection weight: max. 290 g/PS
- injection pressure: max. 2048 bar
- tool height: min. 300 mm
- opening the tool: max. 600 mm
- distance of tool boards: max. 900 mm
- ejector stroke: max. 150 mm
- centering ring: 160 mm
- screw diameter: 45 mm
- weight: 9500 kg

ENGEL VICTORY 650/130 TECH injection molding machine equipment:
- Polish language
- hot water regulator
- number of zones of the regulator: 11
- sorting unit
- air valves
- number of air valves: 4
2004
24,975 €  
  PL   request
125829135 702

W & P Kegelrundwirker for sale
conical-rounder, fabr. W & P, type CR 87-3


moveable, cap. max. 2000 pcs./h, \r\ndougweightrange approx.. 300 to 1500 g (estimation)\r\nalu - cone, plastic tracks, \r\ninclude fan + hot air

 
moveable, cap. max. 2000 pcs./h, \r\ndougweightrange approx.. 300 to 1500 g (estimation)\r\nalu - cone, plastic tracks, \r\ninclude fan + hot air
 
Price  
    request
125823219 201

SCM Z.32c for sale
Beam saw


Type Z.32c Ser. Nr. 040306 Cutting length 3200 mm Cutting width 3200 mm Max. saw blade protection 80 mm Compressed air pressure 6 bar Main motor 7,5 kW Max. saw blade feed speed 13.5-27 m/min Air cushion t ...

 
Type Z.32c
Ser. Nr. 040306
Cutting length 3200 mm
Cutting width 3200 mm
Max. saw blade protection 80 mm
Compressed air pressure 6 bar
Main motor 7,5 kW
Max. saw blade feed speed 13.5-27 m/min
Air cushion tables 4
Scoring unit 1,5 kW
Made in Italy
Weight 2880 kg

 
4,200 €  
  LT   request
125829137 702

W & P Klimagärraum for sale
proofing-chamber, airconditioned, fabr. W & P,


airconditioning type GRD 09\r\nelectrical power: 9,1 KW / 380 V / 50 cycles\r\n for steamer and heating\r\ndimension: outside l/d 2000 mm, w 900 mm, h 2320 mm\r\n

 
airconditioning type GRD 09\r\nelectrical power: 9,1 KW / 380 V / 50 cycles\r\n for steamer and heating\r\ndimension: outside l/d 2000 mm, w 900 mm, h 2320 mm\r\n
 
Price  
    request
125823142 706

ATLAS COPCO ZR 400 for sale
COMPRESSOR PLANT


Complete compressor unit consisting of: Low pressure compressor 10 bar and booster 40 bar together with air storage tanks and piping see pictures
used machine
 
Complete compressor unit consisting of:
Low pressure compressor 10 bar and booster 40 bar
together with air storage tanks and piping
see pictures
2002
Price  
    request
125828887 702

Transport- u. Kühlbänder for sale
spiralcooler, ambient cooling, belt width 700 mm,


running time variable 13 - 26 Min.\r\ninfeed low, outfeed high\r\n11 tiers, distance between the tiers approx. 200 mm\r\ngap between the tiers approx. 145 mm\r\nAshworth stainless steel belt, type: Omni - Grid 100\r\nbel ...

 
running time variable 13 - 26 Min.\r\ninfeed low, outfeed high\r\n11 tiers, distance between the tiers approx. 200 mm\r\ngap between the tiers approx. 145 mm\r\nAshworth stainless steel belt, type: Omni - Grid 100\r\nbelt cleaning at the outfeed by presure air\r\nonly used approx. 4 h for trials \r\nmotors/gearbox are new or reconditioned, belt is new\r\n
 
Price  
    request
125794458 805  

ROLAND 505 OB LV for sale


ref. 517 Roland 505 OB LV format 53x74 cm, year 2002, straight 5-0, lack tower, stock 0,04-1 mm, Vmax=18 000 s/h, double size of transfer and impression cylinders, auto format setting, PPL, RCI, Rolandmatic Delta, IR/T ...
used machine
 
ref. 517
Roland 505 OB LV
format 53x74 cm, year 2002, straight 5-0, lack tower, stock 0,04-1 mm, Vmax=18 000 s/h, double size of transfer and impression cylinders, auto format setting, PPL, RCI, Rolandmatic Delta, IR/TL dryers, Air Glide delivery, Grafix, Rietschle air center, all automatic washers, ink units temperature control, in production, price: 180 000 EUR FCA
2002
180,000 €  
  PL   request
125828893 702

Paniermehlanlage for sale
complete line for making breadcrumbs capacity 30


include \r\nfeeding conveyor\r\nprecrusher\r\ntransportpneumatik\r\nswing-screen-dryer \r\nexhaustair-filterstation\r\nheating system/heat exchanger\r\nheat recovery \r\npipelines\r\nbreadcrumbmil\r\nbuffer silos\r\nswit ...

 
include \r\nfeeding conveyor\r\nprecrusher\r\ntransportpneumatik\r\nswing-screen-dryer \r\nexhaustair-filterstation\r\nheating system/heat exchanger\r\nheat recovery \r\npipelines\r\nbreadcrumbmil\r\nbuffer silos\r\nswitch box/electrical panel\r\n
 
Price  
    request
125785730 601

DAVIDE GIUDICI COMBI for sale
TEXTURIZING AND AIR JET WITH ELASTAME


NUMBER 60 POSITIONS EACH MACHINES FORNACE LENGHT 1,50 MT FINAL BOBIN 240 -290MM JET HEBERLEIN FUSED TEMCO PRODUCE SINGLE OR DOUBLE YARN YEAR 2006 AUTODOFFING
used machine
 
NUMBER 60 POSITIONS EACH MACHINES
FORNACE LENGHT 1,50 MT
FINAL BOBIN 240 -290MM
JET HEBERLEIN
FUSED TEMCO
PRODUCE SINGLE OR DOUBLE YARN
YEAR 2006
AUTODOFFING
2006
Price  
  CH   request
125829261 702

W & P Anlage für runde Brötchen for sale
rollplant, fabr. W & P for the production of kai


5 rows, cap. max. 8.200 pcs./h, model 1989/1990,\r\ninclude \r\ndivider + rounder, type MUS - G 5, model 1998\r\n doughweightrange max. 150 g\r\n include moulding drum 74 -85 g\r\nintermediate proofer, type ZGL5/27 ...

 
5 rows, cap. max. 8.200 pcs./h, model 1989/1990,\r\ninclude \r\ndivider + rounder, type MUS - G 5, model 1998\r\n doughweightrange max. 150 g\r\n include moulding drum 74 -85 g\r\nintermediate proofer, type ZGL5/273/360,\r\n proofing time approx.10 min.\r\nstamping unit, type FST 5/50\r\nfinal proofer type SG 0,6/1010/950,\r\n proofing time approx.35 min.\r\nairconditioning\r\ndepositing device, width 600 mm, max. length 800 mm
 
Price  
    request
125776211 108

ZDIS GLIWICE YUN 4000-2 for sale
Welding Machines


Oxygen burner ZDIS GLIWICE YUN 4000-2 was built in 2004 by ZDIS Gliwice. Numerically controlled, the YUN 4000-2 thermal cutter is designed for curvilinear oxygen cutting of carbon and low alloy steel sheets. Technical ...
used machine
 
Oxygen burner ZDIS GLIWICE YUN 4000-2 was built in 2004 by ZDIS Gliwice. Numerically controlled, the YUN 4000-2 thermal cutter is designed for curvilinear oxygen cutting of carbon and low alloy steel sheets.

Technical parameters :
- table dimensions: 15x3 m, it can be shortened because it is modular
- two oxygen burners and additionally a third burner with plasma routing
- maximum cutting width: 4000 mm
- flammable gas: acetylene
- power consumption: approx. 1.5 kVA
- compressed air: min. 0.4 MPa, max. 20 m3 / h
- water: min. 0.1 MPa, max. 0.12 m3 / h

The cutter includes the following main assemblies:
- roadway
- trolley with longitudinal and transverse drive units
- gas installation
- microcomputer MUS control system
- ZSP steering team
- oxygen supports: 2 items
- power supply installation
- dimensions of the trolley with longitudinal and transverse drive units (W x H x D): 5450 x 1675 x 2500 mm, weight: 1400 kg
- dimensions of the roadway (length x height x rail gauge): 14000 x 600 x 5000 mm, weight: 1800 kg
- GCE machine burner with valves and fuses and a set of nozzles for cutting thickness from 3-150 mm: 2 sets
- DTR (technical and operational documentation)

Additional equipment for the ZDIS GLIWICE YUN 4000-2:
- water mist spraying unit: 1 item
- band for edge chamfering at an angle of 0-45 degrees, with straight cuts: 1 piece
- ASTER program to support the work of the technologist in the development of cutting programs: 1 item
2004
24,750 €  
  PL   request
125829269 702

PROBAT Klimagärraum for sale
proofing-chamber, airconditioned, Probat, 2 doors


electrical power: 4 KW / 380 V / 50 cycles\r\n for steamer and heating\r\ndimension: l/d 285 cm, w 175 cm, h 215 cm\r\n 5 qm, 10 cbm

 
electrical power: 4 KW / 380 V / 50 cycles\r\n for steamer and heating\r\ndimension: l/d 285 cm, w 175 cm, h 215 cm\r\n 5 qm, 10 cbm
 
Price  
    request
125776143 303

UROLA MRS-M4 for sale
Extrusion blow molding machines


UROLA MRS-M4 Rotary extrusion blow molding machineNmber of molds: 4 Number of heads: 1 Operation: Oleodynamic-Mechanical Molds clamping force: 3000 kg Maximum production depending on the container: 2600 P / H Pa ...
used machine
 
UROLA MRS-M4 Rotary extrusion blow molding machineNmber of molds: 4
Number of heads: 1

Operation: Oleodynamic-Mechanical
Molds clamping force: 3000 kg
Maximum production depending on the container: 2600 P / H

Packaging dimensions:

Blowable volume: (Maximum capacity): 2000cc Maximum diameter: 110mm
Maximum height: 325mm

Dimensions of plate and mold:

Maximum opening molds: 140mm
Minimum half-mold thickness: 80mm ( For the rest of the dimensions, see the drawing of the mold carrier)

Extruder:

Screw diameter: 80mm
Electric motor power: 40 Kw
Number of thermoregulable zones: 10
Plasticizing capacity: 140 kg / h

Maximum consumption:
Total installed power: 95 Kw
Average power consumed: 75 Kw
Water at 7º C, 4 Kg / cm2:
- Flow: 15 m3 / h
- Refrigerating power consumed: 40000 kcal / h AIR AT 8 Kg / cm2
- Flow rate: 1.4 m3 / min

Air pressure: 5 - 7 bar
1998
Price  
  ES   request
125829067 702

W & P Kegelrundwirker for sale
conical-rounder, fabr. W & P, type CR 59


infeed 3 clock / outfeed 12 clock, cap. max. 5000 pcs./h, \r\ndougweightrange approx.. 400 to 1600 g (estimation)\r\nmoulding length approx. 4100 mm\r\ncone + tracks are teflonised\r\ninclude fan + hot air, moveable\r\n

 
infeed 3 clock / outfeed 12 clock, cap. max. 5000 pcs./h, \r\ndougweightrange approx.. 400 to 1600 g (estimation)\r\nmoulding length approx. 4100 mm\r\ncone + tracks are teflonised\r\ninclude fan + hot air, moveable\r\n
 
Price  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More models (2 or more machines):
(3)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Injection molding machines ENGEL VICTORY 650/130 TECH


ENGEL VICTORY 650/130 TECH was built in 2004. The machine is designed for processing of thermoplastics and silicone-for each type of plastic is a separate unit. In addition, the Board fixed and movable is cooled with water. Technical data: -the number of hours worked: 70822 -the maximum clamping tables: 1300 kN mass injection: max. 290 g/PS -injection pressure: max. 2048 bar -height: min. 300 mm -opening: max. 600 mm -distance tool plates: max. 900 mm -ejector stroke: max. 150 mm -centering ring: 160 mm -screw diameter: 45 mm -weight: 9500 kg Equipment of injection moulding machines ENGEL VICTORY 650/130 TECH:-language: Polish -hot runner controller -number of zones: 11 -sorting unit -air valves -the quantity of air valves: 4

Beam saw SCM Z.32c


Type Z.32c Ser. Nr. 040306 Cutting length 3200 mm Cutting width 3200 mm Max. saw blade protection 80 mm Compressed air pressure 6 bar Main motor 7,5 kW Max. saw blade feed speed 13.5-27 m/min Air cushion tables 4 Scoring unit 1,5 kW Made in Italy Weight 2880 kg

Roland 505 OB LV


ref. 517 Roland 505 OB LV format 53x74 cm, year 2002, straight 5-0, lack tower, stock 0,04-1 mm, Vmax=18 000 s/h, double size of transfer and impression cylinders, auto format setting, PPL, RCI, Rolandmatic Delta, IR/TL dryers, Air Glide delivery, Grafix, Rietschle air center, all automatic washers, ink units temperature control, in production, price: 180 000 EUR FCA

TEXTURIZING AND AIR JET WITH ELASTAME DAVIDE GIUDICI COMBI


NUMBER 60 POSITIONS EACH MACHINES FORNACE LENGHT 1,50 MT FINAL BOBIN 240 -290MM JET HEBERLEIN FUSED TEMCO PRODUCE SINGLE OR DOUBLE YARN YEAR 2006 AUTODOFFING

Plasma Cutting Machines CR ELECTRONIC EU 3-15 S


Plasma cutter CR ELECTRONIC EU 3-15 S was produced in 2003 year. Technical parameters: -table size: 1500 x 3000 mm -burning Chamber in pipes: for fi 400 -power source: Kjellberg HD Hi-Focus 100 -air filtering and ventilation: Kemper 8000 -cutting HD quality cutting-CR ELECTRONIC EU 3-15 S, steel, aluminum and stainless steel: up to 25 mm thick.

Welding Machines ZDIS GLIWICE YUN 4000-2


Oxygen burner ZDIS GLIWICE YUN 4000-2 was built in 2004 by ZDIS Gliwice. Numerically controlled cutting machine for thermal cutting of YUN 4000-2 is designed for oxygen cutting curved sheets and low-carbon steels. Technical parameters: -overall dimensions: 15x3 m, it can be reduced because it is modular -two oxygen burners and the third burner with plasma routing -maximum cutting width: 4000 mm -gas combustible: acetylene -power consumption: ok. 1.5 kVA -compressed air: min. 0.4 MPa, max. 20 m3/h -water: min. 0.1 MPa, max. 0.12 m3/h Part of the cutter consists of the following main units: -roadway -trolley with longitudinal and transverse drive -gas installation -mikrokomputerowy control MOUSSE -control unit ZSP -bottom bracket oxygen: 2 PCs. -installation of the socket -dimensions of the teams drive longitudinal and transverse (width x height x depth): 5450 x 1675 x 2500 mm, weight: 1400 kg -overall dimensions of the roadway (length x height x): 14000 x 600 x 5000 mm, weight: 1800 kg -the machine burner GCE with valves and fuses przypalnikowymi and a set of nozzles to the cutting thickness from 3-150 mm: 2 Kit. -DTR (motor and technical documentation) Optional equipment cutting ZDIS GLIWICE YUN 4000-2: -team to the sprinkler water mist: 1 PCs. -team to bevel edge for 0-45 degrees, straight line cutting: 1 PCs. -ASTER to support work in developing technology programs: 1 PCs.

Extrusion blow molding machines UROLA MRS-M4


UROLA MRS-M4 Rotary extrusion blow molding machineNmber of molds: 4 Number of heads: 1 Operation: Oleodynamic-Mechanical Molds clamping force: 3000 kg Maximum production depending on the container: 2600 P / H Packaging dimensions: Blowable volume: (Maximum capacity): 2000cc Maximum diameter: 110mm Maximum height: 325mm Dimensions of plate and mold: Maximum opening molds: 140mm Minimum half-mold thickness: 80mm (* For the rest of the dimensions, see the drawing of the mold carrier) Extruder: Screw diameter: 80mm Electric motor power: 40 Kw Number of thermoregulable zones: 10 Plasticizing capacity: 140 kg / h Maximum consumption: Total installed power: 95 Kw Average power consumed: 75 Kw Water at 7º C, 4 Kg / cm2: - Flow: 15 m3 / h - Refrigerating power consumed: 40000 kcal / h AIR AT 8 Kg / cm2 - Flow rate: 1.4 m3 / min Air pressure: 5 - 7 bar

Vertical machine center (molding type) YCM NSV 102A


YCM-NSV-102A-molding type high speed vertical CNC machining centers NSV102A Spindle   Spindle Speed (opt.) rpm 12.000 Max. Spindle Motor Power kW 30 Spindle Taper BBT40 Travel   X-axis Travel mm 1.020 Y-axis Travel mm 600 z-axis Travel mm 600 Distance Between Spindle Nose & Table Top mm 100 ~ 700 Table   Table Size mm 1.120 x 650 No. T-Slots x Size x Pitch mm 6 x 18 x 100 Max. Load on Table kg 1.000 Feedrate   Rapid Feedrate (X/Y/Z) m/min. 60/60/48 Cutting Feedrate mm/min. 1 ~ 20,000 ATC   Tool Magazine Capacity (opt.) 30 Max. Tool Weight kg 6 Max. Tool Dimensions (w/o Adjecdent) mm ø 76 x 300 (ø 125 x 300) General   Pneumatic Supplier kg/c? 5.5 Power Consumption (Transformer), kVA 37.4 (40) Machine Weight kg 7.000 YCM NSV102A Vertical machine center (molding type) Year 2013 CNC Fanuc YCM MPX-200FB OPTION INSIDE: Chip Conveyor. CTS 30 BAR (Hight coolant pump) HSSC (harmonic spindle speed control) Data Server Ethernet Manual guide high speed Air gun Water gun On power and on working Power on time 18.500 hours

Injection molding machines Krauss Maffei 125-700 C2


OVERVIEW: Brand: Krauss Maffei Model: 125-700 C2 Application type: Injection Moulding Machine type: Injection Moulding Machine Availability: 01/07/2018 Construction year: 1998 Production hours: 34200 Location: Czech Republic Origin country: Germany GENERAL DATA: Measurements width: 4670 mm Measurements depth: 1480 mm Measurements height: 2160 mm Machine weight: 6500 kg CONTOL UNIT: Brand: Krauss Maffei INJECTION UNIT: Stroke volume: 377 cm³ Injection pressure: 1892 bar CLAMPING UNIT: Clamping force: 1250 kN MEDIA: Pump drive power: 22 kW ADDITIONAL EQUIPMENT: 1 - 16x Hot channels control 2 - Air venting valve 3 - 2x Core pull cylinder 4 - 4x Water batteries

Capi di abbigliamento arredi per negozio


Clothing and furniture store For sale exclusively on next 17 July at 09:30 at our offices in Bergamo For info on how to participate contact us at 030 7751645, business hours The goods are kept in Isola della Scala (VR) Garments, about 3,500 pieces so divided: -Nr. 9 boxes swimwear -Nr. 18 shoe boxes -Nr. 1 boxes bags -# 2 boxes scarves -# 8 drying racks with clothes -# 1 box containing hats, scarves and bags -# 3 Saddam high happy clothes Shop furniture and furnishing -patio furniture store, consisting of furniture (cabinets, racks, pedestals, tables, chairs, etc) and related accessories (hangers, clothes hanger rods, shelves, etc), all taken apart -various Accessories and furnishings (vases, # 2 talking heads with lamp, # 1 statue height 2.5 mt, lamps and the like, spotlights, various productions)

APV and SPX 15000 liters/hour


Flavoured Still Water Production Equipment APV 15 000 l/h Complete flavoured still water production plant made by French APV and Polish SPX in year 2008. The processing plant has every item from sugar melting, flavouring, pasteurizing, storaging, chilled water and steam production. All design is made by APV, control system is build with Siemens Simatic S7 series PLC. Techncial charasteristics: Manufacturer APV and SPX Installation year 2008 Capacity 15 000 liters / hour Main equipment • Liquiverter 500 liters stainless steel sugar mixing tank with 18.5 kW agitator • Compond syrup mixing tanks 2 x 6000 liters, both with 4 kW agitator and automatic CIP • Sugar measuring and flavouring unit • Sugar Storage Tanks 2 x 17400 liters, insulated tanks with automatic CIP and air blowing system • Storage tank before filling line, capacity 6000 liters with automatic CIP, nitrogen injection system and 3 kW discharge pump. • Steam generator SMS 3.5 bar, 150 C • Water chiller • CIP line with 4 tanks.

Airjet- and waterjet- weaving machines Dornier AWV 4/S and AWSE 4/S


4 colours, Dobby Stäubli 2861 , ww 3200 and 2800 with batching motion, hsafts, beams , heddles and drop wires. 6 to 8 shafts installed Location Germany

Airjet- and waterjet- weaving machines Picanol Omini Plus Omni Plus


with dobby Stäubli 2871, ww 2200 mm , 4 colours, batching device, max 12 shafts, 8 installed. Location: Germany

Meura 550 hl / brew


Mash Filter MEURA 2001 with 48 pcs of 1800 x 2000 mm plates This Meura a thin-bed, membrane-equipped, mash filter was installed in year 2000 in 550 hl beer brew line and it's operation was closed in year 2010 but it is still installed and powered. In 2010 it was preserved properly for long term stoppage first filled with water and later dried completely. This is a complete Meura mash filtration system from wort pump to filtered beer outlet and it includes sparging water tank with a pump and spent grain pneumatic discharge system. The mash filter has 48 polyprobylene plates with membrane cloths and hydraulic jack for opening and closing of the plates. The equipment is in good condition. Technical characteristics: Made in year 2000 Machine number 99102 Filter plates 48 pcs, sixe 1800 x 2000 mm Filter section of one plate 5.6 m2 Total filtration area: 268.8 m2 Sparge water rate min 2.2 hl/100 kg malt Brews / day up to 12 High gravity filtration possible Control PLC Siemens Simatic S7-400 (slave) The delivery includes the following equipment: • Meura Filter with 48 plates and hydraulic system (3 kW) • Wort pump 11 kW • Sparging water tank 1.2 m3 with control valves • Front end panel from infeed flow meter to outfeed flow meter • Spent grain silo • Spend grain discharge screw + system including pressurized air infeed system • Pneumatic control cabinet • Control cabinet with PLCs and frequency converters • All related instrumentation • Available documents and PLC (Siemens Simatic S7) program in digital format

Caspary GmbH Pub Brewery 10 hl


Pub Brewery Caspary 10 HL, Copper Cladded, 2017 Never Installed This pub brewery equipment was made by German Caspary GmbH in year 2017 and it has never been installed and thus new like condition. Factory made brew house block consist of Mash & Wort Kettle, Mash & Lauter Tun and Whirlpool. Whirlpool is located just under Mash & Lautertun. This block has been tested at Caspay factory with all accessories and instruments before shipping. The wort kettle, lauter tun and related pipes and ducts are cladded with highly polished copper which gives this pub brewery a very special high quality atmosphere. Also two-wing trapdoors of both vessels are hand made from copper and polished. This is a complete pub brewery with malt mill, yeast tanks, fermentation tanks, storage tanks, CIP with three tanks, refrigeration system, steam and pressurized air supply equipment. The brewery has semi-automatic control where all valves are controlled pneumatically, while the mashing and boiling process runs automatically. All the steps in this sub-process can be operated via the control panel and programmed freely. Lautering is effected via a continuously adjustable valve. Whereby the Caspary lauter tun ensures smooth and even lautering, a dedicated lauter pump prevents interruptions during lautering. Main characteristics of this brewery - Cast out wort quantity 10 hl at 12 % gravity - Malt though 175 kg/ brew / brew - Max malt milling capacity 500 kg/h - Mash & wort kettle; wort heating in two steps, first heating with double walled bottom and actual wort boiling with internal steam heater - All tanks, vessels, pipes and supports are made of stainless steel 1.4301 / ANSI 304

Man Roland Man Roland 705 3P Air Glide


2000 Man Roland 705 3B R P AirGlide Rails PRINTED SHEETS Approx. 140 mil. CCI-DensitoDensitometryv metry color control devices, Inc. Color Contamination Check Impression Cylinder wash-up device brush type APL (fully automated plate Change System) Static eliminators make Kersten on the feeder Inking unit temperature control, make Technotherm Manual non-stop in the delivery Dampening solution cooling device "Beta." make TECHNOTRANS. Grafix Hitronic Powder Spray-S QuickStart software LCS Software Perfecting device (1/4 – 5/0) VariAir cabinet make BECKER Register system Grapho-Metronic

CNC Punching Machines AMADA Vipros 2510C


OVERVIEW: Brand: AMADA Model: Vipros 2510C Application type: Punching Machine type: Turret Punching Machine Availability: Immediately Construction year: 2006 Production hours: 18000 Location: India Origin country: Japan GENERAL DATA: Measurements width: 4900 mm Measurements depth: 5250 mm Measurements height: 2200 mm Machine weight: 11000 kg MAIN DRIVE: Punching force: 200 kN Maximum sheet thickness: 4 mm CONTROL UNIT: Brand: Fanuc Model: Series 18i-PB Interface: CF Card MOVEMENT: X-AXIS: Movement: 2500 mm Y-AXIS: Movement: 1250 mm MAX MATERIAL THICKNESS: Steel: 6 mm Stainless steel: 3 mm Aluminum: 6 mm TOOLS: No. of stations: 31 Max. tool diameter: 88.9 mm No. of index: 2 MEDIA: Main electronic connection: 220 V Power consumption: 30 kVA Air pressure: 6 bar Lubrication tank: 1 L Oil tank: 150 L ADDITIONAL EQUIPMENT: 1 - Software Bundle

Injection molding machines Engel VC 330/80 (Low Run Hours)


Only 28k run hours. At our works in Wellingborough awaiting refurbishment. Tie-barless Engel 80T originally manufactured in 2002. Engel have become renowned for their innovative design which allows this 80T machine to mould with a wide variety of tools that other 80T machines couldn’t fit in. If you’re not familiar with this tie-barless design, feel free to make an appointment to view the machine and take a closer look. Manufacturer: Engel Model: VC 330/80 Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Year: 2002 Clamp Force (t): 80 Screw Diameter (mm): 25 Max Shot Weight (PS) (g): 62 Control System: Microprocessor Lead Time: August Hours: 27786 In Production: Yes Location: STV Machinery Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbished machines are delivered fault free and leak free.

Injection molding machines BOY 220 Procan


The ever popular BOY 22 with Procan controller. These machines are some of the smallest (footprint) wise in the market and have proven to be reliable and cost effective machines over the years. This machine has been extensively refurbished by us, now in tip top condition. This one has a 24mm screw and only 26078 hours on the clock. Manufacturer: BOY Model: 22M Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Clamp Force (t): 22 Screw Diameter (mm): 24 Max Shot Weight (PS) (g): 32 Control System: Procan Lead Time: Immediate Hours: 26060 In Production: Yes Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free.

Injection molding machines Arburg 420M Two Colour Machine


Awaiting refurbishment at our works is an Arburg 420M 1000-250/250 with Multronica controller. The machine is a twin-shot (two-colour) machine with one injection unit mounted horizontally and one injection unit mounted vertically on the tie-bards for injection on the split-line. Both plasticising units are the same injection unit designation and both are fitted with 30mm barrels, each delivering a shot weight of 89g in PS. The tie-bar spacing is 420mm x 420mm. We don’t tend to see many twin shot machines on the market so this a rare example from a top manufacturer. Manufacturer: Arburg Model: 420M 1000-250/250 Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Clamp Force (t): 100 Screw Diameter (mm): 30 & 30 Max Shot Weight (PS) (g): 89 + 89 Control System: Multronica Lead Time: 4 weeks from order In Production: Yes Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 4 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free.

Injection molding machines Arburg 220M Universal


This is an Arburg 220M 350-90U machine which is currently awaiting refurbishment at our works. The ‘U’ range from Arburg allows for the clamp and injection units to be pivoted vertically which is ideal for insert moulding. These machines were an expensive option when originally manufactured so we don’t tend to see them that often on the used market. Manufacturer: Arburg Model: 220M 350-90U Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Clamp Force (t): 35 Control System: Multronica Lead Time: 6 weeks from order In Production: Yes Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 4 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free.

Injection molding machines BOY 55M


55 tonne clamp BOY machine which is currently undergoing refurbishment at our works in Wellingborough. This machine only has 27600 run hours on the clock and is fitted with the popular Procan controller. BOY machines typically offer a very small footprint and this particular model has excellent access under the clamp unit for conveyors and ease of access. Manufacturer: BOY Model: 55M Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Year: 2002 Clamp Force (t): 55 Screw Diameter (mm): 38 Max Shot Weight (PS) (g): 122 Control System: Procan Lead Time: 4 weeks from order Hours: 27600 In Production: Yes Location: Wellingborough Machines awaiting refurbishment can be reserved with a small deposit and the refurbishment is then prioritised and scheduled. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free.

Buhler GmbH Malt Mill Buhler Maltomat 2


Malt Mill Buhler Maltomat 2 with conditioner and malt hopper This is a malt milling line, capacity 10 t/h, built in 2004 by Buhler from malt conditioner to malt discharge conveyor, all still installed but electricity disconnected. Controlled by Siemens Simatic S7 PLC. Equipment is in good condition. The delivery includes the following equipment and documentation: 1. Malt conditioner Bühler Condimat, type BBFA 3255, electric motor 5.5 kW 2. Malt mill Bühler Maltomat 2, type DBZG 152MU, 6-rolls, roll length 1500 mm, electric motor 30 kW/1450 rpm. Crushing with three grinding roll pairs and only one screening stage (after the husk rolls) which produces a high husk volume for fast wort separation. Comes with one complete set of reconditioned grinding rolls 3. Bühler Malt hopper, capacity 14 tons with discharge chain conveyor type MNKA 200, length 10 meter, capacity 72 tons/h, electric motor 11 kW 4. Original Bühler documentation and copy of PLC program

Filter Press JUNGHANS AFP 30-02


For dewatering of mud, max. drainage output: 20m³/d, power consumption: 12kWh/d, water supply: 4-8bar, water consumption: 1-3m³/d, compressed air supply: 6-8bar, compressed air consumption: <2Nm³/h, Plant ready to use installed in a container, dimensions: 6100x2500x2900m. Additionally there are 2 kits available packed in crates andready for shipment.

Drilling and Grooving Machine PFLUKA KPM 126


Compressed air supply: 6bar, including Vibratory Conveyor MATTERN SE 05 STB R.

ESAU & HUEBER GmbH SEMI/-fill


Beer KEG Filling Line Esau & Hueber Semiautomatic Party-KEG 5 liter 200 KEG/hour The semi automatic party-KEG-filler with 4 filling heads and capacity beginning from 100 up to 200 keg/h, made by Esau & Hueber GmbH in the year 2000. The KEG is placed manually onto the filler and lifted by two-hand operation. A sensor recognizes the arriving of the keg and starts automatically the filling process. The pre-air valve and the return-air will open. The keg gets purged with CO2 for approximately 5 seconds and the air opened simultaneously and the keg will be filled from bottom to top. A sensor probe – installed into the return-air channel – controls the filling process. A lamp indicates the finished filling process – the beer valve will be closed. The return-air valve stays open for a moment to relieve the filling pressure inside the keg to prevent any spilling when removing the keg from the filling head. Utilities, beer, cleaning agents, gas load and a return gas supplied via valve and piping systems controlled by Esau Hueber control system. The design is made of stainless steel frame with a work desk, on which are arranged lift cylinders and pneumatic switches. The frame is equipped with support devices to accommodate all the remaining components. Bottling of beverages produced in the automatic mode. All other processes are performed manually. Equipment is good condition and ready to delivery. Manufacturer: ESAU & HUEBER GmbH Manufacturing year: 2000 Type: SEMI/-fill Capacity: 100 – 200 keg/h Number of filling heads: 4 Serial number: 7003 Product pressure: 1,5 – 2,0 bar Product temperature: >4 – 5 0C Voltage: 230 V, 50 Hz Operating air: max. 7,0 bar Pressure CO2: max. 8,0 bar CIP / washing up to 120 0C / max. pressure 1,5 bar

Painting Line ITW GEMA AG


Paint Shop ITW GEMA AG produced in 2005 year in Switzerland. Line-specific data ITW GEMA AG: -conveyor bi-rotational -the size of the window: 6000 x 1600 x 800 mm -preparation of the surface: 3-zonal bath with a hairdryer -plastic cab-line powered by natural gas -line speed: 1-3,5 m/min. -The line is incomplete.

Komori Lihthrone LS 640 + LX (UV)


coater tower (chambered doctor blade system) PDC-S Printing Control system PQC-S Remote Control of Ink Zones, as well lateral, circumferential and diagonal Register Komorimatic damping with circulation and refrigeration S-APC semi-automatic plate change KMS service system KHS pre-inking and de-inking AMR Automatic Make Ready system automatic ink roller wash-up device automatic blanket and impression cylinder wash-up device Skeleton 3 x UV interdeck dryers 1 x UV end dryer 1 x IR dryer and hot air extended high pile delivery serial equipment max. 16'000 sheets / hour

Polar 115 X


programs air table Jogger RA-4 Stack Lift LW 1000-4

Heidelberg Speedmaster CD 102-5 + LX


coater tower (chambered doctor blade system) Prinect Press Center with Remote Control of Ink Zones, Ink Fountain Roller as well lateral, circumferential and diagonal Register, with Light Pen, Job Memory Card and Touch Screen ALCOLOR damping with circulation and refrigeration CombiStar Ink Temperature Control (water cooled, without outdoor cooler) AUTOPLATE semi-automatic plate change PRESET PLUS automatic size adjustment automatic ink roller wash-up device automatic blanket and impression cylinder wash-up device StaticStar Compact powder sprayer PowderStar AP500 IR-DryStar 3000 extended high pile delivery with Air Transfer System AirStar air cabinet serial equipment New rollers 6 months ago, every two months cleaning and maintaining, very clean and great condition!!

Mitsubishi Diamond 1000 LS 5 + L + L


Double coater IPC II Intelligent Press Control Mitsubishi alcohol damping system with Technotrans circulation and refrigeration S-APC semi-automatic plate changing system Preset Fastwash: automatic ink roller wash-up device automatic blanket and impression cylinder wash-up device 5 x UV interdeck dryers 1 x UV end dryer IR and hot air dryer Eltosch powder sprayer Grafix Digitronic 72 extended high pile delivery etc etc

Numerically Controlled Machining Centres MASTERWOOD TEKNOMAT 3000


Code: 0376 Brand: MASTERWOOD Model: TEKNOMAT 3000 - CE Standard CNC working center anuba hinge unit/routing unit with tool change with 7 spindles - CE Standard Technical data : Anuba hinge unit : loader diameter mm14/16 - Tilting head -10°/+90° -max anuba centre distance mm 2950 - automatic sensor Routing unit: high frequency electro spindle 18.000/24.000 rpm Hp 9 - automatic tool change with 7 spindles Safety guard CE Compressed air pressure 6/8 Atm Overall dimensions: mm 5240 x 4240 x 2200 h Weight kg 2550

Chocolate line Westbrook & Wood SDD800


Manufactured by WESTBROOK & WOOD Model SDD 600 Mould size 600mm x 225mm re-Build 2018 PLC TOUCH SCREEN CONTROL ALL PARTS the ability to control all features from a PLC TOUCH SCREEN production reporting feature high sensitivity work in accordance with safety standards recipe module 48 PISTONS ONE SHOT DEPOSITOR 1 NOZZLE CHOCOLATE & PRALIN 1 TIME MAX 60GR 48 NOZZLE X 60GR=2,88KG NEW DEPOSITOR ALL PARTS MADE 8000 SERIES ALIMINIUM MOULD HEATHER NEW BAND (skidproof SYSTEM) NEW VIBRATION UNIT AUTO RE-MOULDING NEW CHAIN 16B-1 SERIES MADE IN GERMANY ALL ELECTRONIC PARTS NEW BY OMRON BRAND(2 YEAR GUARANTEE) ALL AIR PARTS NEW (2 YEAR GUARANTEE) 2 NEW SERVO MOTOR USE ON DEPOSITOR BY OMRON BRAND (2 YEAR GUARANTEE) 1 MAINLY NEW SERVO MOTOR USE BY OMRON BRAND (2 YEAR GUARANTEE) COOLING TUNNEL NEW eVaPorator (2 YEAR GUARANTEE) NEW FAN (2 YEAR GUARANTEE) MAINLY NEW CLIMA MOTOR UNIT (2 YEAR GUARANTEE) DEPOSITOR HEAT AND COOLER SYSTEM NOW AS A NEW MACHINE NOT ANY PROBLEM EXCELLENT CONDITIONS ANY TIME VISITABLE TO MACHINE STILL RUNNING PRODUCTION AREA

Compressor Sullair BDS 22HH


Compressor Sullair BDS 22HH Year 2003 Rotary Screw Compressor 22Kw 9.5Bar with Compressed Air Steel Receiver Year 2003 Manufactured by Advanced Compressor Engineering Ltd 875 Litres capacity 11.5 Bar.

Filling installations Sidel PET-line, 227 MA0, 26.500 l/h


Complete production PET line for carbonated beverages, 27000 working hours: 1) Blower SBO20 - Siedel, year: 2002 2) Bottler - Siedel, year: 2002 3) plant for carbonisation - Siedel, year: 2002 4) air conveyor (ca. 60 m) - Siedel, year: 2002 5) cap feeding with bunker - HF Meyer, year: 2002 6) measuring device for checking presence of cap and filling level - Indspect, year: 2009

Kebab line Vemag HP10-1400541


Product number: 1268H Vemag vacuumfiller Type: HP10-1400541 Year of construction: 1996 Filling pressure: max 50 Bar Pump capacity: max 7000 kg/hr Power: 3 x 400V, 50Hz, 9.5kW Dimensions: 1250 x 2350 x 2000 mm Weight: 1300 kg With lifter for 200L bins Bretec kebab filler Type: KV2 Year of construction: 2015 Capacity: 2000 kg/hr Power: 230VAC, 50Hz Air pressure: 6 - 8 Bar, 100L//min. Dimensions: 1500 x 800 x 2500 mm Weight: 155 kg

TAGLIO LASER Bystronic Bysprint


BYSTRONIC LASER CUTTING Bystronic Bysprint MODEL BRAND YEAR 2002 DESCRIPTION -sheet Size – (labor camp): 1524 X 3048, Y, Z 170 mm CO2 laser source 4400w 3000 power: 3 Kw Racing principal axes X Y Z mm mm mm principal axes (X, Y) 3048 1524 170 Speed 120 m/min Maximum positioning speed parallel to the x-axis, Y: 120 mm Maximum simultaneous positioning speed: 115 mm Maximum acceleration principal axes (X, Y): 4.5 ms2 Axis resolution 0.001 mm Edge detection accuracy: +-0.5 mm Accuracy (*): • in accordance with VDI/DGQ 3441 measuring length: full stroke (*) part accuracy depends on its type, size and pretreatment, as well as application conditions. Maximum weight: 890 Kg Machine weight: kg 13,500 Cutting heads: 5 "and 7.5" Automatic pallet change Original: CNC Bystronic Sheet metal gauges that can be processed: mild steel – Ferro-: 20 mm stainless steel: 15 mm aluminium: 8 mm -Complete plant of suction and air cooling unit. For details please contact us at 030 725026 and make an appointment. Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00

Separators for dairy WESTFALIA KDA 16-02-177


QUARK SEPARATOR SEPERATOR WESTFALIA KDA 16-02-177 CAPACITY: 1.000 KG PER HOUR

Punching Machines AMADA EM2510NT


OVERVIEW: Brand: AMADA Model: EM2510NT Application type: Punching Machine type: Turret Punching Machine Availability: Immediately Construction year: 2007 Production hours: 40411 Location: India Origin country: Japan GENERAL DATA: Measurements width: 4877 mm Measurements depth: 5120 mm Measurements height: 2317 mm Machine weight: 18000 kg MAIN DRIVE: Punching force: 200 kN Maximum sheet thickness: 3.2 mm CONTROL UNIT: Brand: AMADA Model: AMNC-PC Interface: Ethernet MOVEMENT: X-AXIS: Movement: 2500 mm Y-AXIS: Movement: 1250 mm MAX MATERIAL THICKNESS: Steel: 3 mm Stainless steel: 2 mm Aluminium: 2 mm TOOLS: No. of stations: 45 Max. tool diameter: 110 mm No. of index: 4 MEDIA: Main electronic connection: 400 / 440 V Power consumption: 10 kVA Air pressure: 6 bar

Punching Machines AMADA EM2510NT


OVERVIEW: Brand: AMADA Model: EM2510NT Application type: Punching Machine type: Turret Punching Machine Availability: Immediately Construction year: 2008 Production hours: 26649 Location: India Origin country: Japan GENERAL DATA: Measurements width: 4877 mm Measurements depth: 5120 mm Measurements height: 2317 mm Machine weight: 18000 kg MAIN DRIVE: Punching force: 200 kN Maximum sheet thickness: 3.2 mm CONTROL UNIT: Brand: AMADA Model: AMNC-PC Interface: Ethernet MOVEMENT: X-AXIS: Movement: 2500 mm Y-AXIS: Movement: 1250 mm MAX MATERIAL THICKNESS: Steel: 3 mm Stainless steel: 2 mm Aluminium: 2 mm TOOLS: No. of stations: 45 Max. tool diameter: 110 mm No. of index: 4 MEDIA: Main electronic connection: 400 / 440 V Power consumption: 12 kVA Air pressure: 6 bar

Roland 905-6


Five colours plus coater Straight Coater unit High Pile RCI Rolandmatic Year: 2007 SIZE: Máximum: 1000X1400mm Minimmum: 600X850mm Total of hours: 32 452Hours and 45 minutes 51 874 745 Impressions All Automatic Washers Infra red Hot air PPL –Automatic plate change No damages on cylinders or gears In very good technical and working condition Still in production

Pad Printing Machine COLOR PRINT CP-801 80x100


Compressed air supply: 6bar.

Cup Printing Machines POLYTYPE BDM-301R/ 920/ BDM-301/ DW C 6


Two machines are available: (1) POLYTYPE BDM-301R/ 920: printing unit dimensions: 3000x1500x2200mm, number of printing stations: 8, number of inking units: 6, compressed air consumption: 30m³/h, year of construction: 2004 (2) POLYTYPE BDM-301/ DW C 62: number of printing stations: 6, number of inking units: 6, cup dimensions: 65-135x85-180x125mm, print image length: 414mm, max. speed: 150cups/min, year of construction: 2007.

STORK ENGRAVING 2006/2013


STORK ENGRAVING PLANT FOR ROTARY PRINTING Design studio: with Stork A 300 best image CAD system, 2006 with upgrades up to 2013 2 X Polymerizers, 1995 1 X Coater, 1995 1 X Climatizer, 1995 1 X Lazer Engraver 3000, with generator, 1995 1 X SAPPHIRE Digital sample printer, 2003 1 X Screen washer, 1995 1 X Endring glueing STORK, 1995 1 X Airconditioning unit (over pressure) for clean room atmosphere, 2010

PET Stretching blowing machines Sidel SBO-16


Whole line to produce PET bottles Capacity of line 16 000 bph. Including: - Sidel SBO-16 - compressor 37bar (chiller, dryer etc.) - preform dumper - air conveyors - paltes conveyors - rinnser - filler - capping - labbeling machine - wrapper --- We offer new and used machines. With any further questions, please do not hesitate to contact us.

MACCHINARI E ARREDI COPISTERIA


MACHINERY AND FURNITURE SHOP For sale exclusively at 10:30 next 04/07/2018 in Bergamo To view the lot please contact us on 0307751645 in business hours 9 – 13, 14 – 18:30 or visit our website. Full catalogue available. Goods stored at Isola della Scala -Xerox Multifunction -multifunction printer -corner desk full black # 3 black chairs -metal shelving -Cutter -Xerox Docucolor 250 -Xerox DC 4110 multifunction printer -CP20 Wiremac binding machine drilling 31oltre -# 1 full tower PC monitors, keyboard and mouse -consumables and miscellaneous, ETC ETC ETC. ..

Bottle filling plants VIMERCATI Dynafil


VIMERCATI Filling machine + AROL capping machine - 52 filling nozzles - 8 capping heads Equipment for bottles: 0.3 liters, 0.5 liters, 0.7 liters, 1.5 liters Orientator for cap (sport cap) after general repair Cap feeder (stainless steel) --- We offer new and used machines. With any further questions, please do not hesitate to contact us.

Oil Mist Eliminator NINE CLARA 1000


Airflow: 1000m³/h, operational temperature: 5-50°C, height: 1145mm, weight: 55kg, number of available eliminators: 15.

Air dryer KAESER TD310


This air dryer by KAESER is in good working condition, installed and ready for immediate delivery. Manufacturer: KAESER Type: TD 310 Year: 1999 Capacity: 38 Nm³/min Operating hours: 40 229 h Control unit: Siemens SFC Filters: Parker BF-354, 36.8 ltr KAESER FF-138-EL, 2 x 9.4 ltr

Resuscitaire infant warmer Hill-Rom/GE RW82-1C


Auction name: Ultrasound, gynecology and dental equipment at Beugen Online auction Start of auction: 19 June 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 26 June 2018 19:01 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions
Find used machinery dealers in your country