used AICHELIN Furnaces

Continuous tempering furnace plant, make Aichelin consisting of: - material charge (belt) - hardening furnace (HTO) - quenching bath - washing machine - tempering furnace (NTO) with link chain belt required space: W=4,5 m, H= 4,0 m, L=31 m line length heated length: 6500mm conveyor belt width: 1000 mm electrical connection value: 160 kVA total heating capacity: 500 kW over 40 Noxmat Recu-burner throughput: max. 650 kg/h protective gas: methanol

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", subject to change, reserved for intermediate sale, below: 1 piece used gas nipring plant, make: Aichelin Useful: 1000 mm Useful length: 3000 mm 2 pieces of retort (one of which is only 4 years old and little used) 1 piece storage shaft 1 piece washing machine All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator informat ...

18 kW, 1150 C. - see picture

18 kW, 1150 C. - see picture

Max. operating temperature: 950°C, connected load: 179kW, weight: 4.2t.

1. 1971, BELL TYPE, TEMP.: 500 °C, COIL DIM.: OD 1400 MM x 1600 MM 2. VEB, 1971, INNER CHAMBER DIM.: 2.5 x 1.3 x 1.5 M, TEMP.: 500 °C

Gas furnace, make VEI type: KA_GB_TO external dimensions (w x h x d): 3000 x 3700 x 2300 mm interior dimensions (w x h x d): 1500 x 2200 x 1500 mm temperature: 300 ° C loading weight: max. 2500 kg circulation fans: 2 x 4,0 kW = 8 kW heating power: 120 kW

Gas-fired continuous furnace, make VEI type: DLO_GB heated length: 4000 mm conveyor belt width: 900 mm emperature: max. 950 ° C

Key data: 250 , 1500 , 3000

New device with new machines Warranty -Temperature 250°C -Inside BxDxH 1500 x 3000 x 2000 mm -Outside BxDxH 2410 x 3560 x 2730 mm -Content 9000 litres -Control Omron E5CC (target actual value controller) -Time timer Galaxy -Overtemperature protection Omron K8 Relay -Entry lanes -2 pcs circulating air fans -Exhaust air and supply air flap manually adjustable -Safety door switch -Power 43 KW -Connection 400 V , 3 phased -not suitable for solvent-containing substances -Temperature accuracy +/- 5°C -incl. documentation, CE declaration We are happy to offer installation and commissioning.

Shaft furnace,make VEI type: SCO_EB height: 1100mm useable diameter: 790mm outside diameter: 1560 mm outer height (without lid): 1480mm outer height (with lid): 2300mm electrically heated: 40 kW circulating fan: 2,2 kW three-phase supply: 400 V, 50 Hz temperature: max. 750°C

Qty. 1 Second-hand 8” logs furnace Mfc.: Tecalex Aluminium Technology Built: 2014 Capacity: 4000 kg/h Consist of: Furnace frame Refractory insulation Burner areas Log guiding system Air-gas piping Air supplying fan Thermocouples Fumes exhaust and recirculation fan Furnace exit door Pneumatic system (for the thermocouples and the door cylinders) Nominal production capacity: 4000 kg/h Log diameter: 8” – 203 mm Zones of burners (nº of thermocouples) Nº 4+2 Thermal nominal power installed: 1440 kW Electric nominal power installed: 35.5 kW Max. temperature: 510 °C Dimensions: 16250 x 2400 x 3200 mm – L x W x H UNITS VALUES N° of burners 187 N° of pilot flames 12 Maximum consumption of natural gas ( 36MJ/Nm3 ) Nm³/h 147 Maximum consumption of propane ( 97MJ/Nm3 ) Nm³/h 61

Qty. 1 Second-hand hardening and tempering tube furnace Type of furnace: Roller Hearth Type Hardening & Tempering Furnace Line Mfc.: HANJUNG FURNACE TECH Built: 2012. Effetive Size: Hardening Furnace: ø2380 mm x 57800 mm Shifting rolls: 34 sets Tempering Furnace: ø2380 mm x 61200 mm Shifting rolls: 28 sets Capacity: Max. 30 Ton/H Normal: 25 Ton/H Pipe Dia. 76 – 305 mm (3" ~ 12") Total power: 700 kW Heat Treatment: Quenching & Tempering Normalizing Scope of supply: Charging Table Hardening Furnace Quenching Transfer Conveyor Tempering Furnace Entry Conveyor Stock Conveyor Water Cooling System Control System Exit Conveyor Quenching Tank Discharging Conveyor

TECHNICAL DATA This furnace system is for recrystallization, normalization, soft annealing, stress relief, annealing and conditionally suitable for soldering. belt width: 1000 mm working height: 300 mm (over belt) heated length: 4250 mm electrical heating power: 300 kW heating zones: 4 heating temperature: 900 – 1120°C belt speed: 6 – 60 m/h (continuously adjustable) nominal connected load: 310 kW natural gas consumption: 50 Nm3/h natural gas pressure: 30 – 50 mbar nitrogen consumption: 70 Nm3/h – on purging nitrogen pressure: 100 mbar emergency cooling water pressure: 4-6 bar furnace length: 25298 mm furnace width: 2200 mm furnace height: 2800 mm exhaust gas quantity: 1200 m3 / h

Oven wild Barfield Temperature: 500 ° C Dimensions: Inside dimensions (WxDxH): 470 x 440 x 400 mm External dimensions (WxDxH): 850 x 600 x 730 mm Supply: 380 volts

Temperature: 500 ° C Dimensions: Inside dimensions (WxDxH): 470 x 440 x 400 mm External dimensions (WxDxH): 850 x 600 x 730 mm Supply: 380 volts

Max temperature: 650 ° C Dimensions: Inside dimensions (Wxh): Ø 260 x 700 mm Dimensions (Wxh): Ø 700 x 1400 mm Connection: 380 Volt / 8 kW Machine weight: 300 kg

Gas-fired recirculation chamber furnace max. temperature: 300°C external dimensions ( d x w x h): 2500 x 5300 x 8300 mm internal dimensions ( d x w x h): 1500 x 3800 x 3000 mm control zones: 2 burners power: 4 x 90 kW fans power: 2 x 4 kW

Multi-floor continuous furnace Daub CCTO 20.96.6 Automatic Hanseat tunnel kiln Model: CCTO 20.96.6 Automatic Hanseat Multi-floor continuous furnace Daub CCTO 20.96.6 Automatic Hanseat Multi-storey tunnel oven of Daub type CCTO 20.96.6 with thermal oil system with 6 floors incl. hinge plates for sale. - 6 floors each 2000mm wide and 9600mm long - Total baking area 115.2 sqm - Lights passage on floor 180mm - Steam zone 1200mm - Temperature zone classification stove 1- 3 is top and bottom heat together - Temperature zone classification stove 4- 6 is top and bottom heat separated - Furnace weight approx. 40 tons - with 6 pull-off trolleys including 12 pull-off boards - Wagon crawlers - with thermal oil boiler - with expansion tank and drain tank - Oven is in operation and can be visited on request Metrics: 3000mm Wide 10360mm Long 3250mm High

Meltshop Consists of: 1. 70 Ton EAF (Electric Arc Furnace) • revamped in 2009 by SMS-CONCAST; • Type AC, Shell Type EBT, diam. 5.400 mm; • Tap weight 63 Ton; • Tap-to-Tap-Time 42 Min; • 100% Scrap Charge; Electrode diam. 550 mm; • Electrode Regulation; • Upper Shell Water-Cooled Panels (Steel + Cu); • Arms design Conductive (copper cladded); • Scrap charge with 3 buckets 2. 65 Ton LF (Ladle Furnace) “TAGLIAFERRI”; Tap Time 42 Min. 3. MATERIAL HANDLING SYSTEM, Conveyors and Hoppers 4. CONTINUOUS BILLET CASTER “STS” revamped in 2008; • 4-Strands; • 5 meter Radius; • Billets 130 x 130 mm; • Automatic start and mould level control; • Oscillation with AC motors and variable oscillation frequency; • Water automation of primary and secondary circuits; • Heavy Duty Straighteners; • Upgraded roller table a ...

Key data: 450 , 450 , 600

Convection chamber furnace electr. 450°C with supply and exhaust air system motorized Demonstration device, unused, 24 months warranty -Temperature max.; 450 °C -Volume of oven space: 120 liters -Outside: 1200 x 1470 x 1575 mm(W x D x H) -Oven space: 450 x 600 x 450 mm (W x D x H) -Controller C440, 10 programs each 20 segments -Temperature uniformity: ± 5°C according to DIN 17052-1 -Additional equipment: motor-driven supply and exhaust air system -Permissible batch weight: 120 kg with distributed load -Slide-in strips included: for 2 levels -Connected load: max 10 KW -Fan capacity : approx. 500 m³/h -Connection: 400V 3Ph/PE 50 Hz, without RCD Documentation Visit in our warehouse by appointment.

Maximum temperature 1100 C, Interior 400 x 200 x 400 mm more info on request

Gas-heated stove Usable dimensions (stove wagon): Depth: 4,000 mm Width: 3,500 mm Height: 1,500 mm Temperature max. 1200 C Working temperature: 980 C Heating capacity: 810 kW divided into 6 burners of 135 kW Drives stove wagon: 2 x 0.75 kW Number of rule groups: 3 Control: Siemens S7 Please note that we use the ovens according to customer requirements (e.g. dimensions, temperature, type of heating).

Qty. 8 Second-hand bell annealing furnaces Mfc.: FERRE’ Built: 1980 Modernisation in 2000 Protective atmosphere: N2 No. of furnaces: 8 No. of base: 24 Base relationship: 1 : 3 Annealing temp.: 670-710 °C Coil dia.: 1900 mm Max. stack height: 3600 mm Electric Drawing Mechanical Drawing Combustion Drawing Certification: Allegato V/81 User manual

Multi-storey tunnel oven of Daub type CCTO 20.96.6 with thermal oil system with 6 floors incl. hinged plates for sale. -6 floors each 2000mm wide and 9600mm long -Total baking area 115.2 sqm -Lights passage in floor 180mm -Steam zone 1200mm -Temperature zone classification stove 1- 3 is top and bottom heat common -Temperature zone classification stove 4- 6 is separated from upper and lower heat -Oven compound outside 3000mm wide 10360mm long and 3250mm high -oven weight approx. 40 ton -with 6 pull-off trolleys including 12 pull-off apperates -Wagenkrabbler -with thermal oil boiler -with compensating container and drain container -oven is in operation and can be visited on request

Heated surfacefinishing machine for Zink-magnesium coating Tank capacity : 150 l Heating power: 20 kW Weight: 1230 kg