used AXA Vertical Numerically Controlled Machining Centres

Key data: 750 mm, 500 mm, 600 mm

Inv. Num. : 7098 Type: DBZ Producer: AXA Created: 2008 Parameters: Control system: Heidenhain iTNC53O Duty cycle: 57676 h Hours: 23680 h Work table length: 1000 mm Work table width: 500 mm Maximum table load (even): 800 kg Maximum vertical spindle speed: 6000 1/min X-axis travel: 2x 750 mm Y-axis travel: 500 mm Z-axis travel: 600 mm Maximum tool diameter: 85 mm Max. tool weight: 8 kg Max. tool length: 400 mm Number of stacking positions: 22 pieces Machine height: 3550 mm Machine length: 4460 mm Machine width: 2250 mm Machine weight: 12000 kg Equipment: Chip conveyor 300m Suction Showa CRD-1500RA-CE-0043 Preparation for the 4th axis

CNC vertical travel stand machining center with 4th axis Table size 2380 x 5000 mm. Movement x-axis 1760 mm. Movement y-axis 500 mm. Movement z-axis 780 mm. table load 800 kg Number of tools in the magazine 36 pieces. Maximum spindle speed 10,000 1/min. Tool cone DIN 69871A-40. CNC control Heidenhain TNC 430 M. If you have any questions about the machine, as well as a scheduling for the inspection, we ask you to contact us by phone or e-mail.

Key data: 2 mm, 600 mm, 600 mm

AXA DBZ 2/50 double workstation machining center, Year of construction 2012, Siemens 840 control system, Travel X/Y/Z 2x800/600/600 mm, Tool changer 16-speed, Tool holder SK 50, Spindle speed up to 4,000 rpm, Milling spindle - hollow shaft motor water-cooled, you. measuring systems, Conveyor Heat exchanger control cabinet, Oil mist lubrication, Rittal refrigeration system,

Inv. Num. : 6913 Type: DBZ Producer: AXA Created: 2003 Parameters: Control system: Siemens 840 D Work table length: 1350 mm Work table width: 500 mm Maximum table load (uniform): 550 kg Spindle drive power: 55 kVA Maximum spindle speed: 12,000 1/min X-axis travel: 2x 750 mm Y-axis travel: 500 mm Z-axis travel: 600 mm Machine height: 3500 mm Machine length: 6000 mm Machine width: 3500 mm Machine weight: 10,000 kg Equipment: Technical Documentation Tools Tool Holder 6 pneumatic vises

This AXA NCT VSC-2M Vertical Machining center was manufactured in the year 2015 in Hungary.

X-travel: 2x 500/ 1600mm, y-travel: 300mm, z-travel: 250mm, controls: Heidenhain TNC 355, with documentation, accessories available, was maintained regularly, an inspection is possible.

Controls: Philipps CNC 3460, operational hours counter: 24,325h, the machine needs overhauling, stops irregularly and misses reference points, the monitor is defective.

Table length: 2380 mm Table width: 600 mm Longitudinal X: 1700 mm Cross Y: 600 mm Vertical Z: 600 mm Positions ATC: 30   Positions APC: 0   CNC Brand: _Unknown / Other MACH-id    5425 MAKE        AXA Germany TYPE          VARIO 2 YOP            2002 SPECIFICATIONS X - Travel       1700 mm Y - Travel         600 mm Z - Travel          600 mm Table Length       2380 mm Table Width           600 mm Table load            2500 Kg Table Ø                 640 mm Spindle Taper         40 ISO/Bt/Mk Speeds / ranges      8000 Rpm ATC / revolver  & ...

Vertical machining center make AXA type VSC 0 - 3000 MMachine -No: 84983, built in 1990X-axis stroke: 2 x 1200 mm / 3000 mmY-axis stroke: 300 mmZ-axis stroke: 300 mmTool holder: ISA 40Tool changer for: 30 shotsSpeed range: 0 - 6000 rpm.Rapid traverse: 0 - 15 m / minFeed: 1 - 10,000 mm / minDrive power: 11.2 kWOutside dimensions approx: 5400 x 2100 x 2900Weight approx: 6.5 tWith- CNC control HEIDENHAIN TNC 355- Ball screwsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

AXA VSC2-4000M numerically controlled vertical machining centers, working length 4000 mm (traveling column) Axa VSC1-M Haidenhain iTNC 530 CNC 2003 X, Y, Z = 2240x500x600 (or X = 2x980 pendulum) Linear Heindenhain scales on all axes. full fourth axis with tailstock Spindle Spindle 30-12000rpm (Kessler) Max 30kW / 142Nm 20bar through spindle coolant Tools: 36 tools ISO40 Chip conveyor electronic handwheel Blum tool breakage control Total power 55kVA Total weight about 8500kg This machine can be checked under voltage in our warehouse

Description: Machine number: 87576 Operating voltage: 3 x 400 V Control voltage: 230 V Frequency: 50 Hz Connection: 55 kVA Rated current: 100 A Control system: SIEMENS SINUMERIK 840D SL Table dimensions: 2 x 900 x 500 mm With 5 grooves Incl. 4th axis (dividing head) Tool holder: SK 40 Travel distances: X: 1200 mm Y: 500 mm Z: 600 mm Spindle speed: 30 - 8000 rpm The machine is equipped with a chip conveyor and a coolant system from the manufacturer AXA With 30-fold tool changer The machine has an internal cooling system Read operating hours: 20840 weight approx.: 12,000 kg, Approx. Onsite Dimension. (l x w x h): 4,500 x 2,800 x 2,800 mm

Machine in good technical condition, possibility of testing after agreement. In 2015, GO spindles took place. In October 2023, the tool magazine motor was replaced. In 2011, a license for the DXF software option was purchased - import for iTNC. Motorcycle watches. power on time : 57676. Heidenhain iTNC53O control system. Technical data: Longitudinal clearance (X): 2 x 750 mm Cross travel (Y): 500 mm Vertical travel (Z): 600 mm Table-spindle face distance: 180 - 780 mm Machine table: Table clamping surface: 1000 x 500 mm T grooves 3 pieces (middle groove H7): 14 H9 mm Table load. 800 kg/m2 (with uniform surface load of the table) Feeds: Max. sliding force: 9000N Rapid traverse in X/Y/Z: 25/25/20 m/min Feed in all axes: 1 – 9999 mm/min Main drive-spindle: Main drive AC motor with hollow shaft 40% ED: 40 kW Speed ​​range - stepless: 30-6000 rpm. Spindle torque 4 ...

Type: VSC 1-3000M Parameters: 3000x500 mm Manufacturer: AXA Year of production / SO / GO: 2000 / - / - Description: The machine is in good technical condition. Table area: 3000mmx500mm Z axis: 600mm Heidenhain 430M control system Tool magazine 36pcs Heidenhain workpiece probe and tool probe 8 pcs of fully hydraulic vices controlled on the panel Partition wall for 2 workplaces, now a raised board on the left side. Upon agreement, the possibility of a tour in progress.

This AXA VHC-2 Vertical Machining center was manufactured in the year 2010 in Germany and has 35000 production hours. It is equipped with a Siemens 840 D pl control unit. The machine has a spindle speed of 30-9000 rpm.

This AXA DBZ 2 / 50 3-Axis Vertical Machining Centre was manufactured in 2012 in Germany. It is equipped with a SK 50, DME 132.AM (Kessler) spindle with hollow shaft motor (water cooled) and a spindle speed range of 30 - 4000 rpm. Next to a 16-fold tool changer it comes additionally with a chip conveyor. The machine counter shows 25547 production hours. See original tech specs and layout plans as PDF (German) attached below for further details.

This AXA DBZ Vertical Machining center was manufactured in the year 2008 in Germany and has 58513 production hours, of which 23672 are spindle hours. It is equipped with a HEIDENHAIN ITNC530 control unit and has 4 axis. The machine has a spindle speed of 6000 rpm, is in good condition and well maintained.

This 5-Axis vertical machine center manufactured in 2009, the AXA BAZ VHC 50-XTS, features advanced capabilities for complex machining. It includes a large traverse path of X 2000mm, Y 1000mm, Z 1000mm, and a rotary table diameter of 1200mm. Equipped with a 57 kW spindle achieving 7500 rpm and Heidenhain iTNC530 control, this machine ensures precision and power. Additionally, the 60-place tool changer and integrated tool cooling enhance its efficiency. The AXA BAZ VHC 50-XTS machine we have for sale is optimized for high-performance operations. Contact us for further details.

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Operating hours: 7176 Technical data Number of axis total: 4 Table length: 6400 mm Table width: 1000 mm Table load max.: 1500 kg Longitudinal travel (X-axis): 6000 mm Transversal travel (y-axis): 1000 mm Vertical travel (z axis): 1140 / 1200 mm B axis swivelling range: +/-90 ° Milling head divisions (B): 0.001 ° Tool magazine number of tools: 80 Tool diameter max.: 100 mm Diameter with free adjacent pockets: 180 mm Tool lenght: 400 mm Max. tool-weight: 15 kg Time of tool changing: 6 sec Spindle nose: HSK-A: 100 Spindle speeds: stepless from: 45 rpm up to: 9000 rpm Feeds: longitudinal from: 1 mm/min up to: 9999 mm/min transversal from: 1 mm/min up to: 9999 mm/min vertical from: 1 mm/min up to:  ...

Ref. -No.: 10201 Manufacturer: AXA Year of construction: 2007 Type of control: CNC Control: Siemens 840D Storage location: Halberstadt Country of origin: Deutschland X-Travel: 5000 mm Y-Travel: 600 mm Z-Travel: 800 mm Machine length: 9400 mm Machine width: 3500 mm Machine Height: 3300 mm Table Dimensions (Lengthxwidth): 6325 x 1050 mm Swivelling: +/-90 ° Numbers Of Tools In Magazin: 120 Turning Speeds: 30-9000 RPM Tool changer: SK 50 Drive Capacity - Spindle Motor: 45 kW Weight Of The Machine Ca.: 23 t Tool change time: 6 s Vertical working height: 0-740 mm Working height horizontal: 250-1050 mm Space requirement (LxWxH): 11000 x 5090 x 3300 mm Feed rate: X/Y/Z: 40 m / min

Quills, processing unit, automatic drilling machine, drilling machine, standing drill, Multi-spindle drilling machine -System without control -1x quill processing units -2x sledges -Max. Feed stroke: 110 mm -Speed: 1400 rpm -Built-in collet: 6 mm -Weight: 350 kg

This AXA VHC 2-3500 S horizontal machine center was made in the year 2006, was retrofitted with a reinforced spindle, overhaul performed by AXA in May/June 23 and has 30154 hours. It is equipped with a Siemens Sinumerik 840D control unit. The machine has a spindle speed of 30 - 10000 rpm.

x-travel: 6000 mm y-travel: 1000 mm z-travel: 1200 mm table-size: 6400x1000 mm tool change unit: 80x spindle taper: HSK A100 spindle turning speed range: 45-9000 U/min total power requirement: kW weight of the machine ca.: 48 t dimensions of the machine ca.: 12x4.3x4.5 m SIEMENS 840D 4th axis B-Axis +/-90° Spindle coolant through spindle Tool measuring device www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2000 mm y-travel: 500 mm z-travel: 480 mm control: Heidenhain type: TNC 407 spindle taper ISO: 40 spindle turning speed range: 6000 U/min feed: 15 m/min Tool changer: 40 Cooling through the spindle: 10 bar chip conveyor: : elekt. indexing device - swivable: CNC total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This AXA VSC 2M Milling machine was manufactured in the year 1996 in Germany. It is equipped with a SIEMENS CNC control unit and has 4 axis.

This AXA VSC2 MS/80 Milling machine was made in 1996 in Germany. It is equipped with a Siemens 820M control unit and has 4 axis.