We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Rotary table, rotary indexing table, dividing head, dividing head -Three-jaw chuck: Ø 140 mm -Height: 185 mm -Max. 8 divisions can be set -Bore center: Ø 35 mm -Weight: 30 kg
used
Rotary table, rotary indexing table, dividing head, dividing head -Three-jaw chuck: Ø 140 mm -Height: 185 mm -Max. 8 divisions can be set -Bore center: Ø 35 mm -Weight: 30 kg
used
Three-jaw chuck, three-jaw lathe chuck -clamping plate -Chuck size: Ø 240 mm -Bore: Ø 75 mm -Weight: 30 kg
used
Rotary table, rotary indexing table, dividing head, dividing head -Three-jaw chuck: Ø 190 mm -Height: 320 mm -Bore center: Ø 57 mm -Rotary table: swiveling -Dimensions: 360/310/H320 mm -Weight: 64 kg
used
Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 57 mm -Weight: 19 kg
used
Two-jaw chuck, 2 jaw chucks, vice, face plate -centric: exciting -Chuck size: Ø 242 mm -Rezess: Ø 190 mm -Hole circle: Ø 215 mm -Weight: 26.4 kg
used
diameter: 315 mm weight: 36 kg : ID 105 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Drill quick-release chuck with inserts Make: MAY Type: F 33 Machine No: xxxx Year built: xxxx Offer number: 10296 Technical data: - Quick-release chuck with holder MK 3 - Total length 185 mm - Length from machine spindle 85 mm - Outer diameter on the holder 72 mm - 7 pcs quick-release shots - inserts - 2 x MK3 ; 1 x MK 2 ; 4 x Threaded cutting holders - Wooden box - Total - Weight approx. 17 Kg - Space requirement L 650 x W 200 x H 350 mm
used
I sell a cargo loader suitable for industry, for example in wood industry, painting elements or material manipulation etc. Model: Makor ACR/2 Year of construction: 1990 Manipulazion in 90° from Quär- to parallel direction Element length from 1500mm Thrust with electric motor Speed adjustable with gearbox. Fully operational. Available the same. 2 pcs in stock.
used
Outer Ø: 310 mm Bore: 115 mm Chuck height with flange: 115 mm Height with clamping jaws 165 mm Clamping bolt spacing 120 mm Bolt D 27 mm- M16 new square safety spanner
used
Eccentric lining , Adjustable via C-axis, as good as new condition
used
Machining spindle with two feeds, driven tool, motor spindle with feed used for lathes, milling machines and machining centres; -Motor; -ATB FLENDER; -AF 100L/2A-11; Attention! Since we own several of these devices, the photos are just examples. -3 kW; -Speed: 300 - 2800 rpm; -Tool holder: DIN 2079 SK40; -Power motor; -INDRAMAT; -MKD071B-061_GG0-CN; -0.5 kW; -Power motor: -SSB Drive Technology; -HSDPR-0350 06360 00-B14; -More technical data in the photos; -Overall dimensions: approx. 1200 x 350 x 460 mm;
used
Machining spindle with two feeds, driven tool, motor spindle with feed used for lathes, milling machines and machining centres; -Motor; -ATB FLENDER; -AF 100L/2A-11; Attention! Since we own several of these devices, the photos are just examples. -3 kW; -Speed: 300 - 2800 rpm; -Tool holder: DIN 2079 SK40; -Power motor; -INDRAMAT; -MKD071B-061_GG0-CN; -0.5 kW; -Power motor: -SSB Drive Technology; -HSDPR-0350 06360 00-B14; -More technical data in the photos; -Overall dimensions: approx. 1200 x 350 x 460 mm;
used
Machining spindle with two feeds, driven tool, motor spindle with feed used for lathes, milling machines and machining centres; -Motor; -ATB FLENDER; -AF 100L/2A-11; Attention! Since we own several of these devices, the photos are just examples. -3 kW; -Speed: 300 - 2800 rpm; -Tool holder: DIN 2079 SK40; -Power motor; -INDRAMAT; -MKD071B-061_GG0-CN; -0.5 kW; -Power motor: -SSB Drive Technology; -HSDPR-0350 06360 00-B14; -More technical data in the photos; -Overall dimensions: approx. 1200 x 350 x 460 mm;
used
Machining spindle with two feeds, driven tool, motor spindle with feed used for lathes, milling machines and machining centres; -Motor; -ATB FLENDER; -AF 100L/2A-11; Attention! Since we own several of these devices, the photos are just examples. -3 kW; -Speed: 300 - 2800 rpm; -Tool holder: DIN 2079 SK40; -Power motor; -INDRAMAT; -MKD071B-061_GG0-CN; -0.5 kW; -Power motor: -SSB Drive Technology; -HSDPR-0350 06360 00-B14; -More technical data in the photos; -Overall dimensions: approx. 1200 x 350 x 460 mm;
used
Machining spindle with two feeds, driven tool, motor spindle with feed used for lathes, milling machines and machining centres; -Motor; -ATB FLENDER; -AF 100L/2A-11; Attention! Since we own several of these devices, the photos are just examples. -3 kW; -Speed: 300 - 2800 rpm; -Tool holder: DIN 2079 SK40; -Power motor; -INDRAMAT; -MKD071B-061_GG0-CN; -0.5 kW; -Power motor: -SSB Drive Technology; -HSDPR-0350 06360 00-B14; -More technical data in the photos; -Overall dimensions: approx. 1200 x 350 x 460 mm;
used
Rolling milling machine Koepfer 153 A/CNC Manufacturer Jos. Koepfer & Söhne GmbH Type 153 A/CNC Built in 1988 Machine No. 153199 Technical data Largest Module 2 Distance workpiece tool axis max. 4- 87 mm max. workpiece diameter - without magazine 142 mm - with magazine 80 (100) mm max. milling length 150 mm max. length workpiece - without magazine 300 mm - with magazine 220 mm min. number of teeth 3 min. screw gait number 1 Main spindle through- 33 mm Hole Mounting hole for 50 mm Jig max. cutter diameter 70 mm max. cutter width - Universal milling head 63 mm - Shifting milling head 71 mm max. axial cutter shift - Universal milling head 40 mm - Shifting milling head 44 mm 35 Longitudinal feeds 0.1 -5.0 mm /WU 10 cutter speeds 210-1680 /min Control (2 axes) CNC Drive power 2.2 kW Weight approx. 2400 kg Available immediately Location ...
used
Vertical CNC centre lathe, uses / outdated machine type: Emag VSC 200 control: Siemens 840 C construction year: From the in 1995 to the in 2007 overtakes TECHNICAL DATA: speed area / speeds: [1 / min].: 6,000 Drehmoment:/torque [Nm]: 480 Max dreh-? over bed swing diam .: 290 mms impulse achievement / power: [kW] 34 feed ? / chuck diam. 200 mms revolver / turret: 12-fold, VDI 40, shoemaker powered work witness / driven tools 7.8 kW Verfahrwege: X axis / x-travel: 550 mms Z-Achse/z-travel: 200 mms express way / rapidly travel: (X/Z) [m / min] 30 / 20 prepush / feeds: (X/Z) [m / min]. 11 KN connected load: [KW] 36 kW machine weight: [kg] 6,500 equipment signs: filings sponsor / chip conveyor, crowd
used
Description Feeds in all 3 axes adjustable Digital display, route and position control HEIDENHAIN TNC technical data: Traverse path X / Y / Z 500 / 500 / 400 mm Speed range 30-2240 Rev/min Spindle speeds 24 Feed range 1 750 mm / min Rapid traverse in all feed directions 1500 mm / min Size 450 x 800 mm Weight approx. 1400 kg
used
We have for sale a number of used hydrocyclones from the German manufacturer AKW A+V. Condition: USED Type: RWS 105 Nominal Diameter mm: 50 mm Cut Size dT50,?m: 5-15 Pressure Loss,bar: 1,5 - 3.0 Capacity ,m3/h: 2,4 -7,6 - High pressure resistance, The best operating pressure is much higher than the like products, much easier to reach the better separating effect, good cost performance. - Each type of hydrocyclones has big amount of successful applications, it can ensure that every operating hydrocyclone has the balance feeds. - The involute design from Germany makes the AKW hydrocyclones having better effects of concentration and separation. - Extra long lifetime. - Standardized parts, it is very convenient to change the spare parts.
used
Vemag Vacuum Filler Model Robot 500 With portion control and straight fill, two auger feeds, large hopper capacity. Stainless steel construction, very tidy condition. Offered in good working order
used
P83 - used appr. 12 m³ / 12,000 litres polypropylene tank, aboveground, standing vertically, double-walled, flat-bottomed, in good condition. volume: appr. 12 m³ / 12,000 litres material: polypropylene dimensions: inner tank Ø appr. 2.35 m x height appr. 2.85 m outer tank Ø appr. 2.55 m x height appr. 2.40 m Polypropylene tank, aboveground, vertically standing tank with a flat bottom, double-walled, dome on the top, multiple connections, in- and outlets. Tank as shown on the pictures. For media with a specific weight of up to 1.53 kg/l. The container can be used as a storage tank for water, feedstuff, liquid feed, manure, seeping juice, rapeseed oil, or as a rainwater tank, water cistern and much more. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update a ...
used
Table clamping surface: 600 x 1100 mm traverse path x: 800 mm traverse path y: 450 mm traverse path z: 500 mm Quill stroke: by hand approximately 50 mm of spindle speeds: 63-3150 rpm stufenl feeds. adjustable: 0,1-1500 mm / min rapid traverse: x/y/z 4.5/2,6/3 m / min. Supply: 380 V, 5.5 kW space: 3000 x 2500 x 2030 mm weight: 4000 kg
used
Technical data: -Table size 1600 x 370 mm -Work area of the axles -X (longitudinal) 1000 mm -Y (transverse) 320 mm -Z (vertical) 420 mm -Milling head left + right Tilt + Swivel - 9 table feeds 20-800 mm / min -Rapid traverse longitudinal / transverse 3000 mm/min -Rapid traverse vertical 1375 mm / min -maximum distance spindle - top 480 mm -min / max distance spindle Center / stand 450 mm -Tool holder ISO 50 - work spindle speeds in 12 levels adjustable 45-1400 RPM - coolant system - powered 400 V / 5,8 kW -Space requirement approx. B H 2100 x 2200 x D 2800 mm -Weight approx. 3500 kg
used
Table clamping surface: 500 x 1000 mm stroke x: 630 mm traverse path y: 500 mm traverse path z: 460 mm Quill stroke: hand 45 mm spindle retainer: ISA 40 spindle speeds: 31.5-3150 rpm stufenl feeds. adjustable: 1-3000 mm / min rapid traverse: x/y 6 / z 4 m/min. Supply: 380 V, 6/8 kW space: 1800 x 2120/2600 x 2020 mm weight: 3100 kg