used APV CREPACO Premix installations

APV Crepaco Liquiverter / liquifier for dissolving and dispersing any dairy and food product. This unit is designed to mix, disperse, dissolve, suspend or hydrate solids and liquids or oils and fats with liquids. Volume of the tank: ± 750 liter. Motor (18,5 kW - 1.470 rpm) with motorcover on the top with direct connected 1:1 right-angle drive for controlling the high speed impellor in the bottom, which is creating a strong Vortex which reduces cycle times to a matter of minutes. Stainless steel construction with 4x legs. Round manhole on the top. 2x spray balls for CIP cleaning. Oufeed on the side with a manual butterfly valve. Inside dimensions: 95 x 95 x 80 cm. Stainless steel control panel with start/stop button and a Solcon RVS-AX reduced voltage starter., Type of Machine: Liquiverter, Volume: ± 750 liter, Capacity: up to 15.000 ltr per hour, depending on product and system layout. ...

Centrifugal pump Manufacturer: CREPACO Type: R3R No.: 0-2182 speed-controlled Mobile with housing good condition Gearbox: Stöber LWH: 1050 x 500 x 480 mm

Manufacturer: Pasilac Therm AS Denmark Type: N-35 Year: 1985/ 2022 Capacity: 60 hl/h

APV K 55 plate apparatus, 6 departments, Y.O.M.1994, late 2005 dismantled, cleaned, new clip seals and plates UV tested. test log exists. Power approx. 960,000 Kcal/h

APV Liquiverter TB-250-01. yom.1993, excellent condition. Batchcapacity 250 litres. with double wall for heating or cooling during mixing. The Flex-Mix™ Liquiverter is specially designed for products with low to medium viscosity in order to obtain a fast mixing of powders and particles with liquids. The Flex-Mix™ Liquiverter is usable for mixing, dispersion, recombination and reestablishment of soluble products. It is also used for reconstitution of dairy products, manufacturing of fine foods, emulsions, preparation of starch and hydrocolloid solutions

very well maintained APV tubular UHT plant. Suitable for the sterilization of highly viscous product with high dry matter, such as sauces and concentrates. Capacity in currently setup variable up to ± 3000l / hr. ( capacity up to 6000 lt/hr for low viscous products is possible with bigger homogeniser) Equipped with 2 ALFA LAVAL SHL20 Homogenizers, one in aseptic execution and with ball valves. Supplied with complete documentation and many spare parts. Yom. 1993, excellent condition.

A 2-stage APV water degassing system, Type VII S Type plate Info: Machines No.: 10159 Capacity: 30,000 l per hour Built in 1991 Contents of the lying degassing tanks approx. 2 x 250 l Water precoth 3 bar or slightly higher Residual -0.2 less than 0.1 ppm for a water temperature of 12°C with 1 APV centrifugal pump with 15 KW with 1 vacuum pump, manufacturer Travini Italy, 11 KW with CO2 dosing via needle valve with level control of the entry and exit Water 1 control cabinet on 2 feet standing with Siemens switchgear equipment Dimensions of the system: 2,900 x 1600 x 3200 mm Weight of the plant 950 kg A 2-stage APV water degassing system, Type VII S Type plate Info: Machines No.: 10159 Capacity: 30,000 l per hour Built in 1991 Contents of the lying degassing tanks approx. 2 x 250 l Water pre-pressure 3 bar or slightly higher residue -0.2 less than 0. ...

Brand: APV Gaulin Type: MC 120-3TPS capacity: 20.000 l/h pressure: 205 bar Stages: 2 Dimensions: 170cm x 130cm x 175cm (LxBxH) Country of Origin: Germany YOM: 1993

Beer pump / water uwemetzler@dingslebener

Used homogenising Brand: APV Rannie capacity: current on 6.000 l / h Engine: 37 kW Stages: 2

Brand: APV Gaulin Type: MC 45-5TPSX capacity: 7.500 l / h current pressure: 345 bar Stages: 1 stage Dimensions: 215 x 152cm x 160cm (Lxwxh) YOM: 1982 Engine: PLS 280M; 90KW; 975 r/min; 380 V; 176 amp; 50 Hz

Used homogenising Brand: APV Gaulin Type: MC45-5TPS capacity: 11,600 l / h Dimensions: 215 cm x x 130 x 165 cm (Lxwxh) Country of origin: Germany YOM: Max working pressure: 345 bar Piston diameter: 54 mm Valve: Poppet valves including control panel

Brand: APV Gaulin Type: MC 18-3TPS capacity: 7.500 l / h YOM: 1993 Max working pressure: 200 bar Motor: 55 kW Dimensions: 165 cm x 130 cm x 130 cm (Lxwxh) Electric: 380 V / 3 phase / 50 Hz Stages: 1 stage

Brand: APV Type: 15M capacity: 50 l / h Stages: 2 stages Max pressure: 8000 PSI (550 bar) Power: 2.2 kW (3HP)

Type: MC 18 - 3TPS Capacity: 5.000 l / h Max working pressure: 200 bar Motor: 55 kW Electric: 380 V / 3 phase / 50 Hz

APV Homogenizer LAB 100 Ball valves Technical data see also pictures: Type: 100-6 TBS Capacity: 100 LTR. / h Engine: 2.2 KW

6 departments 1 x steam, 1 x hot water, 2 x product to product, 1 x cold water, 1 x ice water Performance 8,000 litres / hour Clip seals total 423 plates Material of plates AISI 316 (V4A), thickness 0.8 mm

We are offering a used milk homogenising, APV Gaulin MC of 7 it is in good condition and what running in a dairy up until lately. The homogeniser can be inspected near Berlin.

There are two identical Cheese Making Machines APV available, capacity: 8000l, length: 4150mm, width: 2550mm, height: 2600mm, with platform.

Vacuum deaerator that removes dissolved or entrained air, prevents oxidation of product and eliminates color and flavor changes. Can be used for liquid products like milkproducts, fruit juices, soft drinks, sauces and so on. Including: Vacuum pump Sihi, (type: LEMA50), product discharge pump, APV WI + 55/35-220 190. Trimod Besta level sensor , interconnecting piping. Including control cabinet with Siemens S5 plc and HMI. HMI programm is running, PLC programm fails. YOM 1997, excellent condition.

2 Step Aseptic High Pressure Homogenizer; 5 pistons complete with pulsation dampers and hydraulic pressure control; Disassembled/ready for transport

2-stage high-pressure homogenizer; 3 pistons, complete with pulsation dampers and hydraulic pressure control; Disassembled/ready for transport

Centrifugal pump Type: W40/20-220N Manufacturer: APV, Germany Power: 20,000 l/h Speed: 2,900 rpm. Pressure: up to 3.0 bar Connections: Inlet NW 50 / Drain NW 65 Design: Stainless steel Media: Beer, AfG, Milk, Lye etc. Connection values: 380 V, 50 Hz; 3.0 KW Weight: approx. 60 kg Dimensions: 65 x 30 x 35 cm Technical condition: used, excellent operating condition

Double-walled stainless steel tank with agitator 1500 Liter YOM 1991

UHT Pilot Plant / Tube Heater Power: approx. 100 ltr./h - Tube heater - 2 process tanks of approx. 70 litres each - High pressure homogenizer APV LAB 100 - PWA cooler