We have a large selection of various used Norden parts including hot
air nozzles and cooling rings, filling nozzles, tube tilters, cams,
pistons and barrels and lots of tube holders in varying sizes. Please
see the attached photos and feel free to send us an enquiry.
Plasma cutter AJAN SHP 260A is a numerically controlled oxygen sheet
cutting device, using original cutting tools mounted on it, and can be
gas and plasma tools. With these tools you can make straight cuts and
linear cuts, according to programmed cutting programs or by manually
controlling the cutting path. Condition of the equipment good.
pressure: 130 t chamfer lenght: 3050 mm distance between columns: 2550
mm : 500 mm : 440 mm : ± 10 mm throat: 305 mm table width: 90 mm
table height: 800 mm toolpiece height max.: 100 mm : Speeds: Y-rapid
travel: 140 mm/s : 8 mm/s : 140 mm/s : 500 mm/s : 150 mm/s : 500 mm/s
: : : 0,01 mm : 0,02 mm : 0,05 mm : 0,05 mm : : : 250 mm : 600 mm
: 1000 mm : 150 mm : control: 2D-Grafiksteuerung : : : ca. 11 kW
voltage: 3x 400V/N/PE 50 Hz : 6 ± 1 bar : : : ca. 3500x1700 mm
height: 2600 mm weight: 9.100 kg Machi ...
Single column - eccentric press, STANKO, K 1430 A - 100t BJ. 1985
Tech. -Very good - condition, pressure: 100 t
-Projection: 320 mm
-Stroke: 10-130 mm
-Mounting height: 400 mm
-Table size: 850 x 560 mm x 100 mm
-Tappet adjustment: 100 mm
-Stroke: 50-53 / per min.
-Machine weight: 8800 kg
-Dimensions (W x D x H): 1.60 x 1.85 x 2.9 m
Camshaft gear ROSS/Herion Herion valve
Auxiliary brake DESCH Lutex ZB 200
Two hand release
-transverse eccentric shaft and pneumatically actuated clutch / brake
Pressure: 65 tons, cutting performance 1625 mm2 work area - RADIUS 300
mm, kl./Gr.Entfernung v.Aufspanntisch to Stossel 220-440 mm
-Stroke: 8-100 mm
-Table size: 720 x 600 mm adjustable 220 mm
-Plunger area: 450 x 300 mm
-Tappet adjustment: 80 mm
-Strokes: 120 per min.
-. Weight: 3450 kg
-Dimensions (L x W x H): 1.5 x 0.8 height 2.3 m
-Clamping hole Ã¸ 50 x 94 mm
-Motor 4 kW speed 1000 rpm
-Camshaft gear Baluff
-Safety valve Herion
-Manual, wirin ...
computer-controlled, 24 diff. programs, 2 speeds, laminating, dividing
and moulding combined in one machine,\r\ndougweight range 65 - 800
gr., cap. 750 - 6300 p./h\r\nproducing of soft- and hard dough, f.e.
ciabatta, baguette\r\naccessories: 2 four cylinder-moulders\r\nincl.
extender to mould extra-long
SUHNER drilling unit MONO MASTER BEM 20-125 2005.
ï?§ The BEM 20 with HSK comes with an integrated 4-point
clamping set form C, for manual tool clamping
Total stroke 125 mm
Max drilling capacity Ã? 20 mm / 600 N / mmÂ²
Feed force at 6 bar 4130 N
Max uebertragb. Torque 80 nm speed range at 50 Hz 360-10000 min-1
30 - speed 2400 min-1
Air consumption 0.45 l / cm stroke
Runout accuracy 0.01 mm
Steplessly adjustable stroke 125 mm
Inductive limit switches 20-250 ...
sweeping width: 670 mm sweeping width with side brush: 870 mm drive
motor: Kawasaki FA 130 sweeping capacity: 3350 m²/h sweeping capacity
with side brush: 4350 m²/h sweeping speed: 5 km/h dirt container
volume: 2 x 25 l Filter capacity: 1,5 m² total power requirement: 3,3
kW weight of the machine ca.: 112 kg dimensions of the machine ca.:
800 x 1100 x 715 mm This ad was created with MODUL MWS - the software
solution of LogoTech.
-H: approx. 12 cm
-B: 5 cm
-L: 360 cm
-800 kg per pallet space
-3200 kg load capacity
-Traverses 360 cm
-Trusses in orange
-Price per piece
You will receive an invoice with expelled VAT
Accessories such as z.B ground anchor, starting-up protection, etc.
can be purchased with us.
Tell us your requirements...
We assist you with the realisation of your projects, from ...
Cooling capacity: 430 kW.
Year of manufacture: 2010
Refrigerant circuit: 2 pcs.
Type of refrigerant: R407C
Compressors: 6 pcs. (scroll)
Hydraulic module: 3 pcs. water pumps Samson, expansion vessel
Dimensions: 3,5 ? 0,9 ? 1,9 m.
Weight: 2500 kg.
?ondition: This chiller is in a very good condition
Weight approx.: 720 kg Dimensions (l x w x h) approx.: 1600 x 1200 x
1300 mm Description: TERMOWENT TK 03 Angle Bending Machine -
manufacturer: TERMOWENT - serial number: 618 - type: TK 03 - year of
construction: 1999 - weight approx.: 720 kg details: Angle bending
machines type TK-03 are machines used for making sheet seams. The
thickness of the samed sheet cannot exceed 1,2 mm. Speed of sheet
movement V = 10 m/min. The machine is driven by an electric motor
coupled with a universal transmission ? gear motor 2 N ...
Reference no: 3624
Manufacturer: de count GROUP
Type: Photopolymer platemaking PA350N2
. No.: 2406
Year of construction:?
Shipping time: Immediately
Exposure â?¢ Î?lack acrylic plate with vacuum grooves
and a vacuum sheet perfectly hold the negative to the plate
â?¢ 6 lamps type TL 44 D 25W
â?¢ With internal memory of the lamps life to help
determine when it's time to replace them.
Washout â?¢ nylon ...
1 piece Gravens continuous scale with printer. Weight range up to 5000
grams. For the scales, various spare parts for an additional fee can
be bought (belts, boards, camp roles, Control Panel, etc. The scale is
Weight approx.: 1600 kg Dimensions (l x w x h) approx.: 6000 x 1700 x
1500 mm Description: AMS AUTOMAZIONI Chamfering machine for bars and
shutters, manufacturing year 2004, workpiece ends rounding to flatten,
max machinable size of workpiece (min/max expressed in mm): length
100/900 - width 40/80 - height 10/27 - input motorized belt size 5800
x 140 mm with engine power 0.37 KW, output motorized belt size 5800 x
140 mm eith engine 0.37 KW, indipendently working control cabinet,
1 piece Gravens continuous scale with printer. Weight range up to
11000 grams. The scale has a compressed air cylinder which ejects the
n.i.O products (pusher). For the scales, various spare parts for an
additional fee can be bought (belts, boards, camp roles, Control
Panel, etc. The scale is now available.
Weight approx.: 1200 kg Dimensions (l x w x h) approx.: 6000 x 1600 x
2200 mm Description: Automatic chop saw for bars and frames - AMS
AUTOMAZIONE manufacturing year 2004, the machinery can be used
autonomously or in-line with others machineries, motorized loading
belt size 2300 x 140 mm with engine 0.37 KW, cutting unit with blade
Ø 300 mm and engine 1.1 KW, max cutting section 100x50h mm, 2 small
adjustable pistons to clamp workpieces, electronic stop with stroke
2750 mm approx., unloading motorized belt size 3 ...
You didn't find your wanted machine?send wanted inquiryto all dealers (no registration necessary)