We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Press brake AMADA HFE 220-3 Number of controlled axes / CNC controlled axis: 7 Condition good, ready to use, visit under electricity possible / Condition: good, in use, can be seen under power in Poland Pressure / Pressure: 2200 kN / 220 ton Bending length / working range: 3100 mm Distance between stands / distance between columns: 2700 mm Stroke / stroke: 200 mm Delivery speed / downwards speed: 1-100 mm/s Working speed / working speed: 1-10 mm/s Retraction speed / backwards speed: 1-100 mm/s Dimensions Machine / Machine's dimensions: 4.3 x 2.3 x 3.1 m Weight / Weight: 14 ton Machine has: new safety cards from Pilz, new tool clips, new keyboard of control, new stop finger Machine has: new safety cards by Pilz, new tool clamps, new CNC cover, new back gauge fingers
used
Capacity: 0 t Operating hours: 32165 Technical data Pressure: 25 to Max. Bending length: 1250 mm Passage between press bars: 320 mm Distance between the: 1020 Max. stroke: 100 mm Depth of throat: 200 mm Feed rate: 75 mm/s Working speed: 10 mm/s Return stroke speed: 80 m/min Table length: 1200 mm Table width: 60 mm Table height: 865 mm Number of spacers: 6 pce Height of the spacers: 120 mm Number of cylinder: 1 pce Oil capacity: 30 l Voltage 50 Hz 3x: 400 Volt Motor power: 4 kW Machine´s weight about: 1600 kg Overall dimensions machine: Length: 1800 mm Width: 1200 mm Height: 2000 mm
used
Press force: 130T Stroke: 350 mm 4 axis Weight:8860 kg
used
Capacity: 17 t Opening maximum: 150 mm Workpiece height maximum: 100 mm Make Amada FIMAU 17 Type FIMAU 17 Year 1996 Never used Horizontal bending machine Outside diameter max. (mm)Table L = 640 Inside diameter max. (mm) Table W = 540 Max. pipe length (mm)Stroke = 150 Max. angle Force = 17 T Wall Thickness (mm)Speed 17 mm/S Die Height = 100 Manuel stop Never used !
used
Control Amada Pressing force ... 100t Bending length... 3000mm controlled axes ... 7 Drive... Hydraulic The machine is in good condition, possible to test under power.
used
offer 22499 Specifications: -.max. Working length 3100 mm - Stand passage 2600 mm -.max. Pressing force 100 t - Projection 400 mm - stroke 100 mm -.max. Installation height 370 mm - Table height approx. 960 mm - Delivery speed / rapid traverse 85 mm/s - Press speed 10 mm/s - Retraction speed 80 mm/s - Drive power 11 kW - Space requirement approx. W 3500 x H 2300 x D 1950 mm - Weight approx. 8.0 t - with: - 3 axis CNC control CYBELEC - - CNC – Backgauge 0 - 600 mm - split sharpening tool - split V matrices - Support arms
used
Key data: 170 t, 3110 mm
Inv. Num. : 7140 Type: HG 1703 Producer: Amada Created: 2022 Parameters: Control system: AMADA AMNC 3i Duty cycle: 6664 h Hours: 5511 h Number of strokes: 450794 Compressive force: 170 t Maximum bending length: 3110 mm Maximum ram stroke: 250 mm Maximum lifting speed: 220 mm/s Maximum bending speed: 20 mm/s Maximum retraction speed: 250 mm/s Total power requirement: 30 kW Machine weight: 15000 kg Equipment: 5-axis backgauge Footswitch with panic stop function Angle Measuring System Digipro Safety device AKAS III Wila tenses Handwheel
used
For sale we offer an Amada EML 3610NT punch-laser combination machine. The offered machine is used and has 4657Bh. technical data: combined laser/turret punching press EML Z-3610 NT, Y.O.M. 11/2014, 45 tool stations, laser power 4 kW, operating hours: laser/resonator hours: 4657h, control type: AMNC-F, with resonator unit Amada/Fanuc AF 4000i-C, fabrication no. L14x40295, refrigeration & refrigeration unit, flue gas and laser dust filter system Herding MP2 -) right-sided automatic plate magazine LKI AS III MP, Y.O.M. 2015, machine weight approx. 12,000 kg -) left-sided vacuum acceptance & stacking device / single sorting PR 3 300 L 2P, Y.O.M. 2013, power consumption 8.5 kW, weight approx. 4,800 kg Basic installation approx. 20 x 10 m, total H (magazine) approx. 6 m The price is only valid for the machine, without dismantling, transport and commissioning. If you have any ...
used
The turret press AMADA EUROPE 245 was produced in 2000 (machine installation: 2001). The price of the machine includes: installation and training in the use of the machine Punching machine technical data: - CNC control: FANUC 18 i-P - working time: 35,000 h - pressure: 20 t - work table: X = 600, Y = 400 - maximum punching format without intercept and with 31 stations head: 1020 x 1290 (Y-10; Y1010 T2XX; Y-50; Y970 T3XX) - maximum size of a punched sheet with an intercept: 1020 x 2540 mm - maximum size of the sheet to be punched with the intercept + 1 revolution (optional): 1500 x 2540 mm - maximum sheet thickness on the ball table: 6 mm - maximum sheet thickness on the brush table: 3 mm - maximum allowable weight on the table: 100 kg - punching accuracy: + -0.1 mm - positioning accuracy: + -0.07 mm - number of pneumatic clamps / grips: 2 - number of axes controlled s ...
Capacity: 100 t Folding length: 3100 mm CNC Brand: Amada CNC Model: Operateur Max. bending length: 3.100mm Distance between column: 2.700mm Max. pressing force: 100T Dis. Beam – Table: 450mm Beam stroke: 180mm Approch speed: 8mm Working speed: 100mm Return speed: 80mm Adjustment X-Axis back gauge:750mm Number of controlled axis: 4 Control: Opperateur Length: 3.700 mm Width:   ...
used
Height under guides: 90 mm Throat: 0 mm Table length: 400 mm Table width: 400 mm Make Amada HA 4 Type HA 400 Year 1982 Bandsaw automat Capacity round max. diam.Cap = 400 x 400 Angle degrees max.Speed = 15 - 90M Type machine: Vert./Hor.Power 5.5 kW Workpiece height (mm) Chip conveyor Workpiece width (mm)Load = 2500 kg Capacity rectangle (mm) 90 Gr. Cutting Capacity square (mm)Bundel clamp* Managing the cycle of automatic travel included various lengths in the same quantity cycle * Control of pressure and cutting speed * Pressure regulation of vice clamping * Screw chip conveyor * Coolant system
used
Sheet metal deburring machine make AMADA type DB 610Machine -No: 61000917 built in 1989Technical specifications:Sheet thickness: 0.5 - 6 mmSheet width: max. 610 mmSanding roll dimensions: 630 x 200 mm2 grinding roller speeds: 1270 + 2030 rpm.2 cutting speeds: 18 + 13 m / sec.Passage speed: 2 m / min.Working table height: 780 mmDrive power: 3.7 kWOscillation drive: 0.4 kWConveyor belt drive: 0.2 kWWeight approx: 800 kgExternal dimensions approx .: 1660 x 1700 x 1400 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
CNC press brake make AMADA type APX 50.20Ser. -No: APX 50.20 A31213, built in 1993Technical specifications:max.pressing force: 50 tWorking length: 2085 mmPassage between the uprights: 1520 mmStroke: 100 mmThroat: 400 mmTable height: 950 mmOpening width: 370 mmWorking speed: 9 mm / sDelivery speed: 73 mm / sOpening speed: 85 mm / sExternal dimensions approx .: 2600 x 2250 x 2100 mmWeight approx: 3000 kgWith- a complete set of tools- Operator control- Two-hand operation- foot switch- Control defectiveusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Manufacturer:AMADA Feed speed continuous 0 - 31 m/min Without grinding belt !!!!; Without grinding belt fuehrung
Amada Versa 200 x 6 mm (variable) Capacity : 200 x 6 mm Fixed angle -- variable angle: (variabel) 90°-0°-90° Workspace: 1000 x 970 mm Electric motor (power): 4 HP Length : 1000 mm Depht : 1800 mm Height: 1550 mm Weight: 1,4 ton
Amada Versa 200 x 6 mm (variable) Capacity : 200 x 6 mm Fixed angle -- variable angle: (variabel) 90°-0°-90° Workspace: 1000 x 970 mm Electric motor (power): 4 HP Length : 1000 mm Depht : 1800 mm Height: 1550 mm Weight: 1,4 ton
used
Amada Versa 200 x 6 mm (variable) Capacity : 200 x 6 mm Fixed angle -- variable angle: (variabel) 90°-0°-90° Workspace: 1000 x 970 mm Electric motor (power): 4 HP Length : 1000 mm Depht : 1800 mm Height: 1550 mm Weight: 1,4 ton
used
Table size : 3000 mm x 1500 mm Power : 3.5 KW Fanuc resenator Machine is in good condition
used
The best preserved Amada Europe 258 machine on the market Only 17,000 hours Year 2003 It can be seen at work only until the end of October this year
used
Folding table at the rear 12mm aluminum / 8 steel thickness Sharpening knife CNC Backgauge Opening Stroke 190mm
used
Amada Pega-244 Turrent Punch Press Audo index service Punch assembling jigs Tool balander 20 Ton Number of turret stations: 24 Machine is in good condition
used
2000 Watt Year 1998 with chiller, dust extractor, transformer and all documentation with new turbine and service check
used
year of issue: 2009 Bending stick length: 3100 mm press force: 100 to
used
Folding length : 2000 mm 50 Ton Machine is in good condition
used
Amada Europe 255 CNC Punch Press Machine is in good working condition Number of station: 27 3 index(2 piece b, 1 piece c) Fanuc control unit Sheet metal size: 2500x1290