Alfa Laval serial number: 30103-03691
Alfa Laval order number: T613144
Heat exchange surface: 126 m²
Number of plates: 135
Dimensions:
Length: 1.050 mm
Width / width: 915 mm
Hight / hight: 2.040 mm
Weight ...
used machine
Alfa Laval serial number: 30103-03691
Alfa Laval order number: T613144
Heat exchange surface: 126 m²
Number of plates: 135
Dimensions:
Length: 1.050 mm
Width / width: 915 mm
Hight / hight: 2.040 mm
Weight empty: 3.434 kg
Filled weight: 3.771 kg
Design temperature: 340° C
Designed for the following media: Thermooil Side A and side B silicone oil
Volume flow: 193 m³/h and 136 m³/h
Temperature changes: 276-244° C and 189-259° C
Volume of sides A + B: 264 l and 189 l
Operating pressures: 16.5 bar and 14.8 bar
Test pressures: 21.5 bar and 16.5 bar
Complete PET Bottle Filling Line 5.500 bph
This complete line has been built in 2006 and 2007 – installed in 2007 and has been taken out of service in 2016. The line has filling non carbonated soft drinks in PET bot ...
used machine
Complete PET Bottle Filling Line 5.500 bph
This complete line has been built in 2006 and 2007 – installed in 2007 and has been taken out of service in 2016. The line has filling non carbonated soft drinks in PET bottles cap PCO 28 mm. Frequent maintenance is still taking place (greasing and startup / test runs). It is completely installed and in excellent condition. Dry end of the line is being used for repacking purpose. Line has run 3 different bottle formats (biggest 2.0 liters). Spare parts (limited) are available, all documentation is available. The line is in good condition, installed and powered and can be tested.
Make: Various, see details
Built: 2006/2007 – Installed 2007
Capacity: Up to 5.500 BPH
Container handling: PET, 8 oz to 2.0 liters
Condition: Good
Running hours: 16500 hrs
Power / voltage: 460 V / 60 Hz
Equipment included:
- Bohm Pressure vessel – 900 liters – Type 2360
- Aquafine UV Desinfection unit
- Kaeser Air dryer + 40 bar air compressor – THP212 + CSDX 137, 3580 l/min, 75.0 kW
- Barter CO2 Filter – EBCO 1500
- Ingersoll Rand – 7Bar compressor
- 2x LMI Dosing pumps and meters
- Evapco Cooling tower – PMC-220E
- Membrafe Amoniak Membrame Cooling – RL500-3
- 2x Vilter Amoniak compressors – ZL46
- 1x Pentair Water filter
- Pumps & Filters (Various)
- Kosme preform hopper
- Kosme preform elevating conveyor PFA 1500, 0.37 kW, 50 Hz
- Kosme preform alignment infeed conveyor
- Kosme KSB 4L – Linear blow moulder – 4 heads, 68 kW, 50 Hz
- MTA Chiller for Kosme blow moulder, 6 bar, 11.6 kW, 220 V / 60 Hz
- Mesal Air conveyors, linear curves, 9 motors
- Mesal manual outfeed airconveyor to labeler (height adjustment)
- Trine wrap around labeler + Glue pump
- Mesal manual airconveyor infeed from labeler (height adjustment)
- Mesal mixer for CSD
- Amoniak cooler Mesal + Alfa Laval PHE (M10-BWFM, 10 bar, 34.89 L)
- Mesal rinser,filler,capper (Tribloc 30/30/10) – Manual infeed of caps
- Mesal bottle conveyors + SS conveyor belts
- Visial lightbox full bottle inspection (manual)
- Control panel for conveyors + filler Danfoss drives
- Vitz packers, mechanical wrap only packer for 12 packs + Heat tunnel, HT 74 DE
- Outfeed conveyor (manual palletizing)
- Optional = 2x SS sugar dissolving tanks
- Optional = 2x SS storage buffer tanks
PET Bottle Filling Line SIG Simonazzi 23 000 bph - 2002/2013
This line is a complete PET line for beer, carbonated and non carbonated drinks. The line iwas delivered in 2002 by SIG Simonazzi and it was upgraded in 20 ...
used machine
PET Bottle Filling Line SIG Simonazzi 23 000 bph - 2002/2013
This line is a complete PET line for beer, carbonated and non carbonated drinks. The line iwas delivered in 2002 by SIG Simonazzi and it was upgraded in 2011/2013. Currently line is installed and powered and it is designed for 1.0 & 1.5 liter with capacity of 23 000 bph.
Main characteristics
- Manufactured in year 2002 upgrade 2011/2013
- Capacity 23 000 bph in 1.0 and 1.5 L containers
- Total operating hours 38500
- Equipment is in very good condition, still installed but ready for immediate relocation.
List of main equipment:
1. PET Stretch Blow machine Blomax 16 SIG, (operating hours 38217) with
a. SIG Box Tipper for emptying preform containers
b. Preform feeding elevator VZT-2510 with a hopper
c. Preform orientator - feeding system
d. Water chiller Riedel PC 1000 refrigerant R407C
2. Blower Automatic Lubrication system PET 2, year 2009
3. Air conveyor system
4. Beer Analyzer year 2005
5. Flash Pasteurizer Alfa-Laval 400 hl/h with VT 40 BC 25 heat exhanger and buffer tank
6. Block Rinser Simonazzi 60 P113 with 60 rinsing heads
7. Filling block SIG Simonazzi TVR EUROSTAR 2000 year 2002, upgrade 2010&2011with AROL cap feeding system
8. Automatic CIP line for filling block
9. Filling Inspector
10. Labeling machine Krones Prontomatic
11. Bottles conveyor, Simonazzi
12. Laser marker Videojet VJ3430 year 2010
13. Shrink packer SMI SK 600T, year 2002 upgrade 2013
14. Conveyor system Simonazzi for packages
15. Printer applicator STAY TR602 Solv Mektek, year 2009, upgrade 2013 (two step marking the front and back)
16. Printer-Applicator TV102 Mectec year2012
17. Palletizer Simonazzi with pack orienting system
18. Pallet Stretch Wrapping machine Robopak Genesis, year 2002 upgrade 2012
19. Label Applicator Domino Collamat, year 2011
PET Bottle Filling Line Krones 18 000 bph
This is a complete PET bottle filling line, delivered by Krones in year 2003 and used for beer filling
in 1.0 and 1.5 liter PET bottles. The nominal line capacity is 18 000 b ...
used machine
PET Bottle Filling Line Krones 18 000 bph
This is a complete PET bottle filling line, delivered by Krones in year 2003 and used for beer filling
in 1.0 and 1.5 liter PET bottles. The nominal line capacity is 18 000 bph with 1.5 liter bottles. The was in operation till summer 2016 and is still installed, good condition and can be tested.
List of main equipment
1. Blow molding machine Krones Contiform S16, K786-043 with:
- prefom box tipper MD3 and feeding system
- chiller KLC 74T, KKT-Kraus, refrigerant R407C
- 38 gram preform for 1.0 litert PET, capacity 22400 bph
- 40.1 gram preform for 1.5 liter PET, capacity 18 000 bph.
2. Air conveyor line Krones approx 100 meters.
3. Filler monoblock Krones Mecafill K562-253, year 1999 with
4. Full bottle level inspector BBull.
5. Flash pasteurizer Alfa Laval Potok with a buffer tank
6. Full bottle conveyor system with accumulation table
7. Labeler Krones Starmatic.
8. Labeler Krones Contiroll year 2005.
9. Full bottle conveyor system with accumulation tables
10. Shrink wrapper SMI SK 800.
11. Palletizer Kettner Pressant 1N, 1999.
12. Pallet stretch wrapper Helix HS40
13. Control and MCC cabinets.
Power Plant 30 MW with MAN 3 x 12V48/60 HFO Diesel Generators
Complete good condition power plant with three identical diesel generators with MAN B&W 12 cylinder 500 rpm HFO engines and Siemens alternators each g ...
used machine
Power Plant 30 MW with MAN 3 x 12V48/60 HFO Diesel Generators
Complete good condition power plant with three identical diesel generators with MAN B&W 12 cylinder 500 rpm HFO engines and Siemens alternators each generating 10 MW / 11 kV / 50 Hz. The equipment is manufactured in year 1996, engines has approx 65 000 operating hours and all equipment are very well maintained and in good condition. Cooling of engines is arranged with a cooling tower. The plant has Siemens made LV and HV (vacuum breakers) equipment, engine control is refurbished to Siemens Simatic ET200 PLC. With the delivery, there is plenty of original MAN spare parts. The complete plant is fully in operational condition and it has detailed service records and original manuals.
Main technical data:
Engine type: MAN B&W 12V48/60
Engine rotating speed: 500 rpm
Bore and stroke: 480 / 600 mm
Total running hours: approx 65000/engine
Fuel: HFO viscosity up to 700 cSt at 50C
Alternator type: Siemens 1DK 11 kV/50Hz, cos fee 0.8
Fuel oil separators: 3 x Westfalia OSB 35 - 036 - 066
Fuel oil booster unit 3 pcs
Fuel oil transfer pumps 3 pcs
Lubrication oil separators: 3 x Westfalia OSB 35 - 96 - 066
Lubrication oil filters 3 x automatic and 3 x manual
Lubrication oil tank 50 m3
HT and LT heat exchangers: 3 x Alfa-Laval
Steam generators (LFO) 2 x 950 kg (year 2007)
Black start unit: Cummins 625 kVA
LV cabinets Siemens
11 kV HV breakers Siemens Vacuum CB
Plant control system: MAN PC with process screens
DC system Controls and batteries (year 2008)
Station transformer: 22kV/400V
Step up transformer: 11/22 kV
Exhaust gas stack 3 x 65 meter with silencers
Yeast Autolysis Unit Alfa Laval, year 2005
This yeast autolyzer by Alfa Laval has a capacity of 80 hl/h. The yeast-containing solution is heated in a heat exchanger to 80 °C and held in that temperature for 30 secon ...
used machine
Yeast Autolysis Unit Alfa Laval, year 2005
This yeast autolyzer by Alfa Laval has a capacity of 80 hl/h. The yeast-containing solution is heated in a heat exchanger to 80 °C and held in that temperature for 30 seconds. Cooling of the outgoing yeast solution takes place in the regenerative section of the heat exchanger and the outlet temperature is about 26 °C. At the outlet the yeast is completely autolyzed and ready to be disposed. The equipment is in very good condition.
Manufacturer: Alfa Laval
Year: 2005
Capacity: 80 hl/h
Heat exchanger type: Alfa Laval PRO 6-FRM
Buffer tank volume: ~ 6 m3
Thermolysis temperature: 80 °C
Holding time: 30 sec
Electric connection: 3 x 400 V with separate N and PE conductors, 5 wires
Compressed air requirement: 6 – 8 bar, dry, particle and oil free
Steam requirement: 10 bar saturated
Cold water operating press.: 3 barg +/- 0.5 barg, supply press. max 6 barg
Cold water operating temp: min + 2 °C, max + 26 °C
Hot water operating press.: 4 barg +/- 0.5 barg, supply press. max 6 barg
Hot water operating temp: 80 °C +/- 2 °C
Condensate: pressure-less
Hot Deairation unit Aldox Alfa Laval 200 hl/h, year 2005
Deaeration plant Aldox Scandi Brew made by Alfa Laval in year 2005 is designed for produce deaeration water for brewing. Plant Aldox is fully automatic, ready ...
used machine
Hot Deairation unit Aldox Alfa Laval 200 hl/h, year 2005
Deaeration plant Aldox Scandi Brew made by Alfa Laval in year 2005 is designed for produce deaeration water for brewing. Plant Aldox is fully automatic, ready for operation and it can be connected to a general CIP. Removing oxygen from water Aldox systems eliminate any worries about the presence of oxygen in the water you use as cutting liquor for high-gravity brewing. Also it is used in the chasing water for flushing pipes, tanks and filters, as well as in water used for producing low-alcohol beer. Pumps are frequency controlled. ALDOX systems enable you to keep oxygen levels down to as little as 0.01 ppm. Equipment in good condition ready for delivery
List of equipment:
Deaeration column
Heat Exhanger (0/6 bar. -5 ºC/130 ºC)
Control cabinet.
Piping, valves, pumps, etc.
Liquid Chiller GEA Grasso FX 2800 / s - 2 x 2800 kW
Two GEA Grasso FX PV 2800 S - screw type liquid chiller compressors were installed in 2003 (made in 2002) and they still installed and in very good working condition ...
used machine
Liquid Chiller GEA Grasso FX 2800 / s - 2 x 2800 kW
Two GEA Grasso FX PV 2800 S - screw type liquid chiller compressors were installed in 2003 (made in 2002) and they still installed and in very good working condition. The compressors have flooded evaporation, plate type evaporator and evaporative condenser cooler. type They have been operated only 15 000 hours, their cooling capacity is 2800 kW/unit. Refrigerant is R717 (NH3)
The delivery includes complete system with compressor package, evaporators, pumps, intermediate NH3 tanks, evaporative condenser and control cabinets.
The screw compressor sucks NH3 gas out of the liquid separator and compresses it up to condensation pressure. The refrigerant turns to liquid as it is cooled in the condenser. The liquid NH3 is injected back to the liquid separator via a high pressure float valve as expansion device. Inside the liquid separator liquid form and gas for are separated. The liquid NH3 passes in a gravity driven circuit to the evaporator. During the evaporation into gaseous form (with heat energy delivered by the secondary refrigerant) it evaporates and a mixture of gas and liquid is coming back to the liquid separator. Oil is injected into the working chamber of the screw compressor during operation and it is then separated again from the refrigerant in the discharge side oil separator. The oil which has heated up in the compressor is cooled in an oil cooler to reach the entry temperature and passes a fine filter.
This liquid chillers is equipped with a freely programmable standard logic controller PLC SIMATIC C7-633. All operating and fault signals as well as the process variables can be read from a LCD display with background lighting. The display is operated via a robust foil keyboard having 6 functions and 24 system keys.
Technical data:
Manufacturer: GEA Grasso GmbH
Manufacturing year: 2002
Number of units: 2 complete units
Type: Grasso FX VP 2008 / S
Cooling capacity: 2800 kW / unit
Electric motor: Schorch 560 kW / 2988 rpm / 50 Hz
Refrigerant: R 717 (Ammonia)
Evaporator: Alfa-Laval M20-MWFRC
Evaporative condenser: BAC XX
Compressor package EW: 13250 kg
PET Bottle Filling Line 6 000 bph
This is a complete PET bottle filling line used for beer filling in 2,0 and 2.5 liter PET bottles with capacity of 6000 bph (2.5 L). The line is still installed and powered. The line ...
used machine
PET Bottle Filling Line 6 000 bph
This is a complete PET bottle filling line used for beer filling in 2,0 and 2.5 liter PET bottles with capacity of 6000 bph (2.5 L). The line is still installed and powered. The line was installed in 2002 and reconfigured in 2011/2012 with new stand alone rinser, labeling machine and pallet stretch wrapper
Main Equipment included in this line:
Item 1: PET Blower Sidel SBO 08 year 2002
- 8 cavities for 2.0 and 2.5 liter bottles
- capacity 9000 bph (2.0 L)
- preform feeding system and a chiller
Item 2: Air conveyor system
Item 3: Stand alone Rinsing Machine AVE, capacity 6500 bph, year 2012
Item 4: Plate type flash pasteurizer Alfa Laval, year 2002
- type Flexiterm F-60-12
- heat exchanger FRONT 8 FRH, comes with a buffer tank
- capacity (beer) 120 hl/h
Item 5: Filler Capper CBI O&H50/10, upgraded in 2002 with
- 50 volumetric filling valves
- 10 AROL capping heads
- Capacity 6000 bph in 2.0 liter
Item 6: Full Bottle Inspector HEUFT Basic, year 2002, capacity 12000 bph
Item 7: ACI Bottle dryer
Item 8: Labeling machine Krones Solomodul, 2 station (neck and body) plastic hot glue labeler year
2011, capacity 7000 bph
Item 9: Label Inspector Krones Checkmat - 707 BS, year 2007, capacity 12000 bph
Item 10: Shrink wrapper Dimac Stor P30, year 2002
Item 11: Robopack pallet wrapper
Flash Pasteurizer Procomac Unitherm P 10 m3/h
This good condition pasteurizer was made by Italian Procomac in 2003, and it has been pasteurizing beer with the capacity of 10 m³/h. The heat exchanger is made by Alfa ...
used machine
Flash Pasteurizer Procomac Unitherm P 10 m3/h
This good condition pasteurizer was made by Italian Procomac in 2003, and it has been pasteurizing beer with the capacity of 10 m³/h. The heat exchanger is made by Alfa Laval, Sweden.
Technical data:
Pasteurizer:
Manufacturer: Procomac, Italy
Model: UNITHERM P 10.000
Serial no: P8763
Year: 2003
Capacity: 100 hl / h
Heat exchanger:
Manufacturer: Alfa Laval AB, Sweden
Type: FRONT6-WSFRM
Serial no: 30104-12428
Year: 2003
Volume: 110 ltr
Pressure: 7.0 bar (design), 9.1 bar (test)
Biomass plant 1,6 MW thermal output
including
Electrostatic precipitators year 2012
Funding institutions year 2012
Heat 50 m³ year 2012
Chimney 25 m 500/600 mm year 2012
Water preparation year 2012
Power pump 2 x ...
used machine
Biomass plant 1,6 MW thermal output
including
Electrostatic precipitators year 2012
Funding institutions year 2012
Heat 50 m³ year 2012
Chimney 25 m 500/600 mm year 2012
Water preparation year 2012
Power pump 2 x 15 kW year 2012
Power pump of 4 kW year 2017
Control cutting year 2017
Oil boiler 1.3 MW year 1998
Heating oil tank 30.000 L year 1998 TÃ?V 2017
Pressurisation Pneumatex year 1998
Heat exchangers Alfa Laval 1 MW (2 PCs.)
Heat exchanger Schmidt-Bretten 1 MW heat exchanger Thermowave 0.8 MW table cooler 2 MW year 1998