We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
4. Mobile SAW Tractor unit OERLIKON Source STAMIC 1303 DC - cabel array with sealed multipin connector on tractor for better handling and shipping of unconnected machine - Controlbox SUBARC 3 - Tracor MEGATRAC 6 with Laser and Flux Reusing unit by nozzle controll unit for real welding speed externally - machine comes with OEM manual and literature You find further listed equipment for welding in additional auctions (doens not belong to this auction): 1. 1 SAW Tandem Welding Boom - Oerlikon UP Tandem Column And Boom fitted for 2 times 3,2mm wire Welding Column for Submerged Arc Welding SAW Tandem submerged arc welding Manufacturer: Welding System: Oerlikon / AirLiquide MFT 70X60 SO, built 2011 used until 2014 Column: Uniweld DIMENSIONS: high 8m; reach 6 m; dolly 3,7 m x 3,6 m Tandem Submerged Arc Welding - Starmatic 1303 DC - Starmatic 1003 AC/DC - Contro ...
used
Gryogenic liquid nitrogen container. Ideal for transport storage or dispensing of gryogenic liquids. Manufacturer: L?Air Liquide ( France ) Type: TCL 100 Capacity: 100 liter Material: Stainless steel On wheels
used
Air Liquide Plasma tome 25 HPC 2007 construction working area 2m x 4m water table with nivau regulation 1 x Plasma Nertajet HP 125 , cutting up to 25mm
used
Air Liquide Plasmatome 25 HPC Built in 2007 Work area 2 m x 4 m Water table with Nivauregulierung 1 x plasma Nertajet HP 125, cutting up to 25mm
used
Nitrogen tank is the best system for storing biological samples. 300 liter capacity. Like new, it includes 14 racks with 12 positions for 12 storage boxes of 100 cryovials each, with a capacity for a total of 16,800 samples. We have 2 tanks available for sale. This makes a total of 16,800 samples per tank, a total of 33,600 samples. It allows to store other boxes or rack formats.
used
Includes case with cables
new
Available in stock 1 x NEVER USED Air Liquide Pressure Regulator DCn 300/3 Suitable for all industrial gases, including oxygen, acetylene and propane. Non corrosive and toxic gases excepted. The equipment was never used and is still inside the original packing. Maximum Flow Rate: 350 Nm3/h (N2) Maximum Inlet Pressure: 50 bar Adjusting Outlet Pressure: 1 to 18 bar
used
Description: The machine is in working condition. , no. of cutting heads: 1, Cutting type: plasma fusion cutting, table surface area l x w : 3100 x1500 mm, weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 5,000 x 2,450 x 1,700 mm
used
maximum operating pressure: 10 bar effective delivery quantity at about 7.5 bar: 450 l / min required drive: 1450 rpm, 4 kW Drive motor: 380/660 V, 1440 rpm, 5.5 Tank capacity: 250 l Space: 1500 x 600 x 1320 mm Approximate weight: 250 kg
used
mechanical emulsion mist separator with filter and fan used Manufacturer: AIR-FRESH-SERVICE Industriefilter GmbH Type: FMN-12 with fan ZIEHL ABEGG RH31V-ZID. DC.1R 1.15 kW 380 V Top condition! Total dimensions: approx. 1800 x 700 x 1050 mm The filter was planned for a dental laboratory. All items are checked for function before delivery, if technically possible ! Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.
used
mechanical emulsion mist separator with filter and fan used Manufacturer: AIR-FRESH-SERVICE Industriefilter GmbH Type: FMN-12 with fan ZIEHL ABEGG RH31V-ZID. DC.1R 1.15 kW 380 V Top condition! Total dimensions: approx. 1800 x 700 x 1050 mm The filter was planned for a dental laboratory. All items are checked for function before delivery, if technically possible ! Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.
used
Air compressor Planet Air L 550 with dryer KT 700; good condition; 550L/min.; 10 bar; incl. air dryer KT 700. Compressor Plant AIr AL 550; good condition; volume 550L/min.; 10 bar; with air dryer.
used
Whisper compressor Planet Air double piston; as good as new condition; double pistons; 8 bar; Boiler 50 liters. Whisper compressor Planet Air double poppet; condition as new; double poppet; 8 bar; tank 50 liters.
used
Output: 21 bags/min, the screen is defective.
used
Connected load: 1.25kW, length: 1900mm, width: 840mm, height: 2400mm, operational hours counter: 5751h.
used
voltage phase frequency. 400V /3 Ph/50 Hz volume rate of flow 3,54 m/min stage pressures 7,5
used
Complete welding fume extraction for 7 places with filter, extraction, silencer, The system was purchased for training purposes, installed and never put into operation. Plant cost well over 50,000 euros. Extraction ( turbine ) RE71-500-1-D/2/11,0/RDO/2900 9.9kW Filter AIR RECEIVER The system is sold complete with pipe system.
used
SHRINK WRAPPER, CRYOVAC, TYPE: CJ 51T LH Technical description: Power supply: 380-440 V / 50-60Hz Power: 15 Kw Bandwidht: 250 mm Clearance: 270 x 130 mm Dimensions: 2100 x 900 x 1600 mm
used
oil-free compressor, Additional title: oil-free screw compressor, Capacity: 1 m³/min, Working pressure: 8 kg/cm² = 7,8 bar, Max. pressure: 10 kg/cm² = 9,8 bar, Power: 22 kW, Voltage: 400 V, Frequency: 50 Hz/FU, Length: 1100 mm, Width: 1600 mm, Height: 1471 mm, Weight: 640 kg, Features: Swan-air compressor Type SDU-415N with 4 cylinders; MTA air dryer Type DEiT018
used
Guide cylinder, compact cylinder with guide COMPAIR GCXA063H125 8265590 Piston diameter: Ø 63 mm rod diameter: 3x Ø 20 mm stroke: 125 mm end plate: 148 x 19 x 80 mm New ! Dimensions: 350 x 155 x 85 mm
used
Pneumatic cylinder COMP AIR Ø 125 stroke 400 mm
used
pneumatic cylinder linear unit COMP AIR
used
pneumatic cylinder linear unit COMP AIR
used
SPOT COOLER; HIS-30A; 30 HP; 3Ph 440V 60 Hz HI AIR Korea 1x Set of Spot Cooler with: Compressor - 22KW Screw Type Evaporating Unit - 7.5KW. (1 Set) Condensing Unit - 0.75KW. (4 Sets) Power Consumption - 30.5KW Running Current - 80A Refrigerant - R-22 Please note: This lot is subject to a buyer's surcharge of 10%, VAT might be applicable, and is sold subject to award. Make HI AIR Korea Model HIS-30A Type SPOT COOLER Capacity 84,000kcal/hr
used
Technical documentation Operation-system.pdf Description of the unit Complete 3-stage micronisation system with air classifying unit including : 1 - Container emptying station - Lifting jib / crane for positioning and turning container. - 1 x Stainless steel powder container - Powder emptying system: synchronisation and tight opening of the container in order to empty the powder into a storage hopper. 2 - Micronisation unit - Bepex Pulvocron PCS 10 mill and classification The Pulvocron air classifying mill utilizes high-speed impact and internal particle size classification to produce fine powders with a narrow size distribution. Adjustable operating conditions, including tip speed, air flow, and classifier speed provides control over resultant particle size, material temperature, and capacity. Thermally conditioning the inlet air stream provides optional heating to ...