used AIGNER Window tools

Year of construction 1996, hyd. Pivotable with spring-loaded rubber scraper bar, suitable for wheel loaders, skid steer loaders, municipal vehicles

Protective device from Aigner for clamping small parts during milling, etc. This protection device is often recommended by the BG. Except for a small milling in good condition. The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Aigner Air Jet 4 - Abrasive dust extraction Dry sanding of various materials often produces dust that is harmful to health. An effective solution for this is the use of an abrasive dust extractor. This device reduces dust emissions and helps to comply with the particulate matter limits: 5 mg/m³ in Austria and 1.25 mg/m³ in Germany. - Aigner Air Jet abrasive dust extraction - EC pipe extraction arm - Powder extinguishing system with detection line - incl. documents - Year of construction 2020 Specification - Max. air flow: 5000 m³/h - Max. pressure: 5000 Pa - Filter: 4x 13 m² - Dust: 10 g/m³ - Nominal power/current: 7.5 kW / 35 A - Nominal voltage: 3x 400 V - Net weight: 560 kg

Description: consisting of: WEINIG UC 6 angle unit, incl. tool sets (year of manufacture 2001) Technical data: Dimensions (L x W x H): 7500 mm x 2600 mm x 2100 mm Weight: 4200 kg Areas of application: Production of wooden and wooden-aluminum windows in profiles IV 68, IV 78 and IV 90. Machining options: End profiles can be slotted and tenoned. Longitudinal profiles can be processed in the inner and outer rebate. Special functions: External sash rebate processing/rebating including synchronized spindles for tear-free routing. 2. Spindle for separating glazing beads is included. 4. Spindle for routing fittings and gear groove is included. Automatically swiveling outfeed for return transport to the operator. Processing in manual and automatic mode is possible. Tools available: Slot and tenon end profiles for timber/timber sash windows in IV 78 and IV 90 with conv ...

Gold – Inserts System Tools Box window set Product Name: Inserts Manufacturer: Gold Werkzeuge GmbH Condition: used For the production of profiled single or box windows Slotting tools - Indexable insert version HW(HM) - Z-2 - Zero diameter 300 mm - BG test - screwed to precision threaded bushings 50/40 mm Longitudinal tools - with zero – diameter 111.5 mm Tool set consisting of: 1x slot set for frame 1x pin set for frame pins on top 1x cone set for frame frames at the bottom 1x inner profile set for glare frames inside side and top 1x inner profile set for frame inside bottom 1x inner profile set for wings inside all around 1x slot set for grand pianos 1x cone set for wings 1x outer profile set for wings all around 1x outer profile set for wings - middle seam Price: 3.750,00 € plus VAT from location Grunow (Brandenburg) Shipping is of  ...

Gebr. Slotting tool / window milling tool Extensive milling tool as shown mainly from STEHLE for 40mm spindle Drawings are partly available from various milling cutters To self-collectors.

Window tool set complete For wood thickness IV 78 slotted discs and milling heads as well as additional tools Also additive WOOD ALU

complete window tool set IV 68 with additional milling head for left centre rebate and bank connection as well as many spare knives

Description: amount 2 pieces Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 500 mm, weight approx.: 10 kg

Window slot machine REX with trimming saw and slot milling L x W x H: 200 x 150 x 160 cm Weight approx. 750 kg Built in 1976 The machine is in good condition, ready to use. This machine is available from October 2018. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

-) Working area X: approx. 3,300 mm -) Working area Y: approx. 1,300 mm -) Working area Z: approx. 300 mm -) Main engine: approx. 7.5 kW -) Tool change points: 2 x 24 pieces Fix and 1 x 10 with you -) Lock box unit: permanently installed -) Machine table: console table -) Positioning aid: Yes -) Workpiece special clamping system: Yes -) Software: SCM XILOG 3 -) Number of milling spindles: 1 piece -) Speed: 18,000 max rpm. -) Torque support: Yes -) Tool clamping system: HSK-F63 -) Design: boom machine -) Vacuum pump: Yes -) DXF interface: Yes -) Chip conveyor belt: Yes -) CE mark: J Yes -) Total connection: approx. 22 kW -) Weight: 9,600 kg

TECHNICAL DATA: Trimming Saw Ø max mm: 400 Tenoning spindle: 1 Ø max mm: 350 Profiling spindles: 2 Ø max mm: 240 Glass frame trimsaw Feedrate max/min: 2.5/15

Electronic tenoning machine for door and window frames COLOMBO AT 35 second hand machine CE Standard : Yes machine composed by 2 working units : 1 End-cutting circular saw : Blade diameter mm 400 Motor power Hp 4 Horizontal movement of the blade mm 130 Max. height of cut mm. 125 Tenoning spindle : Automatic tenoning carriage: Stroke mm 1700 Worktable dimensions mm 600 x 1100 Spindle diameter mm 50 Spindle length mm. 620 Vertical stroke mm. 540 Max tool diameter mm 320 Motor power Hp 10 Weight kg 1800 volt. 380/50

Length: 5200 mm Width: 1200 mm Height: 900 - 1000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Length: 5000 mm Width: 750 mm Height: 3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Length: , Width: , Height: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Length: 2700 mm Width: 770 mm Height: 1250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Winkelanlage Weinig including tools Type: UC 10/6 Year of construction: 1994 Cross wood processing 7 x stroke (7 tools on top of each other at IV 68) Longitudinal machining 3 shafts: 2 pieces with 3 x stroke and 1 piece with 2 x stroke Screen control for individual programs such as individual and series production Swivel stop arm for inclined window processing Tool: IV 68 Leitz (Dufix) with extension kit for sash 78 mm / frame IV 68# IV 68 with rung profile (carnish arch on the glass fold) IV 78 Zuani (for weather legs and rain rail) with extension kit for IV 90 (Zuani) with extension set for wood-aluminium windows (Aluminum shell as glass holder outside of Zuani) Weight 4700 kg

I sell the Fensterbau cone cutting and slotting system Weinig Unitec 10. Year of construction 1998. Milling heads OERTLI. Available the same. Unit price 5.500 euro. 3 pcs. available. Condition very good !

I sell the window construction kit: 1 pcs. cone cutting and slotting system Weinig Unitec 10. 1 pcs. profile automatic converter center Weinig Univar 10. Year of construction 1998. Milling heads OERTLI. Available the same. Price together 10,000 euros. Condition very good !

I sell the complete window construction profiling line: 1 pcs. 5-spindle four-side planer with saw Weinig Unimat 23EL - without grinding machines HESS - other replacement machine by appointment 2 tap cutting and slotting system Weinig Unitec 10. 2 pcs. profile automatic converter center Weinig Univar 10. - Set of complete Weinig automation feeders and foerderer. - without a central computer - must be added and programmed. Year of construction 1997. Milling heads OERTLI. Available the same. Immediately dismantled with original pallets. Price together only 48,000 euros. Condition very good !

I sell the scM Multiflex window angle system. Milling heads VIVALDI EU68mm. Incision + cone spindle right / cone side. 2 pcs. profile milling spindle + glass list cutting saw left / roll forming side Available the same.

MBO K55-4KTL + window buckle plate In great working condition. - 2 Knives - 4 buckle plates + window buckle plate - gluing system (not complete) - Vaculift, Vacubelt, Vacutable

Working height: 30-100mm, working width: 40-220mm, including documentation.

Number of compartments: 40, compartment dimensions: 130x2000x2500mm, including distribution and placing trolley with vertical infeed and outfeed, with spare rollers and documentation, was maintained regularly.