5 axis multi used for sale

General SKUR0867 LocationBarneveld MakeP.Spiess-Tschudin AG (CH) Main Features MaterialStainless steel Motor5 KW Surface2.5 m2 Specified Features - Nutsche filter MaterialCeramic, Stainless steel Filter surface2.5 m2 Vessel sizesdia. 1750x400mm Top connectionsinspection door 450x350mm (2x) dia. 40mm (1x) dia. 30mm (1x) With stirrercheck Motor5,0 kW, 380 Volt (Ex) Stirrer can be liftedcheck Information TypeFZS 80 F16 Mach.No.unknow, manufacturer plate is missing Year of construction1967 Mounted on legscheck Floorspace2,1x 2,0 M Total height4,0 M Weight2600 Kg ATEX compatiblecheck Extra Specificationsbottom provided with permeable tiles ( Silexith) wall with ceramic tiles inspection hatch in the wall 400x300mm Catalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoAnimal feedOther feedConfectionerySolid pharmaceutics ...

General SKU214W273 MakeQVF Glasstechnik TypeROB DN100. 0.5m² No.98068 Year of construction1998 LocationBarneveld Pressure Vacuum possiblecheck Working pressure shell2 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Main Features Shell (Material)glass Tube (Material)Graphite Surface0.5 m2 Specified Features - Shell and tube heat exchanger MaterialBorosilicate Glass 3.3, Graphite, Stainless steel 1.4301 (304) Heat exchangercheck Horizontalcheck Heating surface0,5m³ Tube capacity3 ltr Number of tubes:11 Tube diameter14 mm Tube length1200 mm Max. temperature+150°C Shell capacity7 ltr Shell diameter100 mm Shell length1100mm Max. temperature+150°C Shell connectionsDN50, DN80 Cover connectionsDN50 Information Floorspace0,23x1,55 m Total height0,23 m Weight50 kg Technical specs Extra information- SIC better heat transfer coefficient than glass ...

General SKU360S873 MakeTrennso Technik (D) TypeSIK 500-1200-2-O No.0600117 Year of construction2011 LocationBarneveld Main Features MaterialMild steel Surface0.5 m2 Size length1200 mm Sizes width440 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0,5 m2 Number of sieve decks:2 Sieve sizes440x1200mm Inlet190x190mm Outletdia 200mm (2x), dia. 250mm (1x) Drive excentercheck Motor0,75 kW 220-240/380-420 volt Sieve perforationdia. 10mm, 1x1mm With ball cleaningcheck MaterialMild steel Information Mounted on mild steel framecheck With switchcheck Floor space2,1x1,3 M Total height2,3 M Weight950 KgFeed additivesPaper & otherOther pharmaceuticsOrganicsE-waste & metalSugarAnimal feedOther feedSolid pharmaceuticsPlastic & rubberMinerals & inorganicPlastic & polymersRubberOther chemicalStarchGeneric medicinesPowdered foodsVibro sievesConsumer wasteTren ...

General SKU214W146 MakeQVF GLASTECHNIK TypeROB DN 100, 0,5m² No.98066 A Year of construction1998 LocationBarneveld Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell2 Bar Working pressure tubes3 Bar Main Features Shell (Material)glass Tube (Material)Graphite Surface0.5 m2 Specified Features - Shell and tube heat exchanger MaterialBorosilicate Glass 3.3, Graphite, Stainless steel 1.4301 (304) Heat exchangercheck Horizontalcheck Heating surface0,5 m² Tube capacity3 Ltr. Number of tubes:11 Tube diameter14 mm Tube length1200 mm Max. temperature150 °C Shell capacity7 Ltr. Shell diameterDN100 Shell length1425 mm Max. temperature150 °C Shell with expansion jointcheck Shell connectionsDN80 (2x), DN50 Cover connectionsDN50 (2x) Information Floorspace0,2x1,4 m Total height0,2 m Extra Specifications- SIC better heat transfer coe ...

General SKU018W114 MakeApex Engineering UK TypeGranupex GR 311-565 No.A-46560 Year of construction1998 LocationBarneveld Material Jacket materialStainless steel Pressure Working pressure0 Bar Vacuum possiblecheck Working pressure jacket2.5 Bar Main Features MaterialStainless steel Volume565 Ltr. Specified Features - Tumbler dryer MaterialStainless steel 1.4401 (316) Tumbler dryer/granulator (1x) Capacity450-565 Ltr, Bulk density max. 1,2 G/CC Diameter± 800mm Cylindrical length± 1200mm Inletdia. 460mm Outletdia. 200mm With jacketcheck With braking motor11,0 KW, 400/690 Volt Dryer speed5,5-17,5 Rpm With lump breakerLiquid Dispersion Bar, Max. 2000 Rpm Motor11,0 KW, 380-415 Volt With vacuum pumpmake PIAB type MLL-400 With condensermake APEX, type 61A Information With switchgear(Dim. 100x400x150 CM)DiscountTumbler dryersApexDiscountDryers > Tumbler dryersBr ...

General SKU266U441 LocationBarneveld MakeBioengineering TypeLP351 Pressure Working pressure2.5 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume50 Ltr. Motor4.9 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4404 (316L) Stainless Steel Reactors Reactorcheck Capacity50 Ltr. (max. 75 Ltr.) Vessel sizesdia. 345x870 mm Dished bottomcheck Top connectionsdia. 80mm, 20mm (7x) Outletdia. 20 mm With jacketcheck 15 Ltr. Max. temperature150 °C With propellor stirrercheck (double) Rushton-turbine Motor4,9 kW, 260 volt, 3250 rpm Speed mixing shaft1083 rpm Information No.D574 Year of construction1988 Mounted on legscheck With switchcheck With switchgearcheck (as is) Floorspace0,8x0,85 m Total height1,9 m Weight450 + 220 + 210 kg Extra SpecificationsThis is a st ...

General SKU011Y102 MakeMirodur SpA. Aprilia TypeTurbomill 50HP No.128 Year of construction1992 LocationBarneveld Main Features MaterialStainless steel Volume10 Ltr. Motor37 KW Specified Features - Sand mill MaterialStainless steel Vertical sandmillImmersion mill (1x) Capacitybasket 10 Ltr, Basket dia. 430mm Motorhydraulic drive unit 37,0 KW, 380/660 Volt Information With switchgearcheck Floorspacemill 2,4x0,8 M Total heightmill 2,7 M Extra Specifications- Dim. hydraulic unit: 2,3x0,8x1,3 Mtr (LxWxH) - Shaft length ± 1150mm (incl. basket) - Distance between shaft and frame ± 700mm DiscountSand millsMirodur SpaDiscountMills > Sand millsBrand > Mirodur Spa What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The ...

General SKU345S1081 MakeGAB Neumann LocationBarneveld TypeN-B-0,8 Pressure Vacuum possiblecheck Working pressure shell3 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Surface0.6 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Heating surface0,6 m² Tube capacity4 Ltr. Max. temperature-60/180 °C Shell capacity4 Ltr. Shell diameterDia: 400mm Shell length605 mm Max. temperature-60/80 °C. Shell connectionsDN 25 (2x) Cover connectionsDN 80, DN 50 Information No.13769-11243 Year of construction1994 Floorspace0,4x0,4 m Total height1,1 m Weight200 kgCatalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFoo ...

General SKU042Y538 MakeStilmas TypePSG-500 DTS No.3797/86 Year of construction1986 Mounted on framecheck Pressure Working pressure10 Bar Working pressure jacket10 Bar Working pressure tubes6 Bar Main Features Capacity1.35 Ltr./Hr. Specified Features - Distillation Distillation installationcheck Pure Steam Generator Vessel sizesø 320 x 1800: ø 280 x 1300 mm Number of columns:2 Electric heatedcheck MaterialStainless steel 1.4401 (316) Information LocationBarneveld With switchgearcheck Floorspace1,5 x 0,7 m Total height2,7 m Weight600 kg Extra SpecificationsStilmas Pure Steam Generator type PSG-500 DTS produces saturated, dry, pyrogen-free pure steam, used as heating fluid for industrial systems. Pure steam production: adjustable (operating range stated) up to 8 bar. Steam consumption (heating steam to pure steam): 1.35 kg/kg of pure steam. DiscountDistillation ...

General SKU169K559 Makeunknown Year of constructionunknown Mounted on legscheck Material Shell materialStainless steel Cover materialStainless steel Tube materialStainless steel Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface39.5 m2 Specified Features - Shell and tube heat exchanger Heat exchanger/Steam generator (1x) Heating surface39,5 M2 Number of tubes:168 Tube diameter25mm Tube length3000mm Shell capacityunknown Shell diameter1200mm Shell length2600mm Information LocationBarneveld Floorspace4,0x1,5 M Total height2,5 MCatalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat exchangersDiscountDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & r ...

General SKU201P111 MakeAlfred Bolz Gmbh&Co. KG TypeMF 500 Mach.No.M1180 Year of construction1988 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket3 Bar Technical specs Max. temperature100 °C Main Features MaterialStainless steel Volume11000 Ltr. Motor15 KW Specified Features - Conical dryer Conical dryercheck Capacity5000 Ltr. (max. 11000 Ltr.) Largest cone diameter2687mm Cone height4400mm Dished topcheck ManholeDN600 Stainless steel armcheck (with mechanical seals) Top drivecheck Motorarm: 1,5 kW (Ex): screw: 16 kW (Ex) Bottom bearing pintle bearingcheck With jacketcheck (1100 Ltr.) Max. temperature100 °C Outlet with sliding valvecheck MaterialStainless steel 1.4404 (316L) Information LocationBarneveld Floorspace3,1x3,0 m Total height5,5 m Weight± 7000 kgCatalysts & fillersFeed additivesPaper & otherOther pharmaceuticsSuga ...

General SKU201P093 MakeSGL Technik Gmbh Meitingen (DE) TypeRS-77-2-5515.1 LocationBarneveld Material Tube materialGraphite Diabon-NS1 G20-3-170 Pressure Working pressure shell6 Bar Working pressure tubes6 Bar Main Features Shell (Material)Graphite Tube (Material)Graphite Surface8 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Diabon-NS1 G20-3-170 Heat exchangercheck Verticalcheck Notified bodyTÜV Heating surface8m2 Tube capacity62 Ltr Number of tubes:55 Tube diameter37mm Tube length1500mm Wall thickness tubes5mm Max. temperature170 Degr.C. Shell capacity100 Ltr Shell diameter406mm Shell length1380mm Wall thickness shell6mm Max. temperature170 Degr.C. Shell connections(2x)DN80, DN40 Cover connections(2x)DN150 Information Floorspace0,7x0,7 M Total height2.2M Weight600 KGCatalysts & fillersFeed additivesPaper & otherSolventsShell ...

General SKU040Z169 MakeHaagen & Rinau / Unimix TypeSH-500 No.301166/2 Year of construction2002 LocationBarneveld Main Features MaterialStainless steel Motor22 KW Rotor150 mm Specified Features - Inline mixer Continuous reactorcheck In-line homogeniser Rotor sizesø 150 x 150 mm Inlet120 mm Outlet75 mm Number of stages:3 Capacitymax. 36 m3/h With mechanical sealcheck Motor22,0 KW, 400 Volt With frequency controllercheck Rotor speed2900 rpm MaterialStainless steel 1.4306 (304L) Information With switchcheck With switchgearcheck Floorspace0,8 x 0,5 m Total height0,5 m Weight300 kg CEcheck Extra Specifications- mirror polished rotor and stator - stator with mechanical seal DiscountInline high shear mixersHaagen & RinauDiscountMixers > Inline high shear mixersBrand > Haagen & Rinau What you can expect from Foeth: -- Machine is in working condition -- At a reduced ...

General SKU204W045 MakeKlima LocationBarneveld CEcheck TypeVU 2121 RRR 70 W S Pressure Working pressure shell10 Bar Working pressure tubes6 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface3.5 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4306 (304L) Heat exchangercheck Verticalcheck Heating surface± 3.5m² Tube capacity16,2l U-typecheck Number of tubes:59 Tube diameter10 mm Tube length950 mm Max. temperature0/120°C Shell capacity17,8l Shell diameter200 mm Shell length1000 mm Max. temperature0/200°C Shell connectionsDN40, DN25 Cover connectionsDN80 Information No.06N9036/22272-B/2006 Year of construction2006 Floorspace0,55x0,50 m Total height1,25 m Weight360 kgCatalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat exchangersDetergent & surf.Other pharmaceutic ...

General SKU056C286 MakeGlatt AG Pratteln Switzerland TypeGC-490/500/600/750 No.101.196 Year of construction1994, Alterations in 2004 (Ref. 601.196-02) LocationBarneveld Main Features MaterialStainless steel Motor1.5 KW Inlet diameter750 mm Specified Features - Coating pan MaterialStainless steel 1.4435 (316L) Coating installationDrum coater with 7 drums (1x) Capacity5,6/11/21/51 Ltr Pan diameter490/500/600/750mm Motor1,5 KW, 400 Volt (Ex) With frequency controllercheck Pan speed± 2-20 Rpm With steam heatingcheck (84 KG/Hr), Steam boiler is not included With fancheck (2x, Intake and exhaust air) Capacity1200 m3/Hr Motor5,3 KW, 400/690 Volt + 1,5 KW, 400 Volt With spraying armcheck (2x), Dosing pump is missing Information With switchgear/air handling unit Floorspace2,5x1,7 m Total height2,2 m ATEX compatiblecheck Extra Specifications- Number of drums: 2x dia. ...

General SKU309N500 MakeFalk gmbh & Co. KG No.3304 Year of construction2007 Mounted on legscheck Material Shell materialStainless steel 1.4571 (316Ti) Cover materialStainless steel 1.4571 (316Ti) Tube materialStainless steel 1.4571 (316Ti) Pressure Working pressure shell1 Bar Working pressure tubes4 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface150.5 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Notified bodyAD2000 Heating surface150,5 m2 Tube capacity830 Ltr U-typecheck Number of tubes:157 Tube diameter25mm Tube length(2x)5900mm Wall thickness tubes2,0mm Max. temperature100 degr.C Shell capacity1530 Ltr Shell diameterdia.711mm Shell length6370mm Wall thickness shell5mm Max. temperature100 gr.C. Shell connectionsdn500, dn80 Cover connections(2x)dn200 Information Loca ...

General SKU122N606 MakeNetzsch TypeLMJ 2 (506.02) No.204 842 Year of construction1983 LocationBarneveld Material Housing materialStainless steel Main Features MaterialStainless steel Volume2.5 Ltr. Motor4 KW Specified Features - Sand mill MaterialStainless steel Horizontal sand mill(1x) Capacity2,5 Ltr. With jacketcheck Motor± 4 KW, Ex With variable speed drivecheck Capacity5-50 Ltr./Hr. With pumpcheck Motor0,25 KW Information With switchgear(0,6x0,3x0,9 M) Floorspace1,1x0,8 M Total height1,5 MDiscountSand millsNetzschDiscountMills > Sand millsBrand > Netzsch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU135M473 MakeWolff No.10255/10256/10257 Year of construction1981 Mounted on framecheck Pressure Working pressure0.5 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume535 Ltr. Motor2.2 KW Specified Features - Stirring vessel MaterialStainless steel 1.4301 (304) Closed stirring vesselcheck Horizontal Capacity535l Vessel sizesDia. 600 x 2000 mm ManholeDia. 400 mm OutletDia. 65 mm With jacketcheck (92 Ltr.) With paddle stirrercheck Motor1,5 kW / 2,2 kW (400 V) Speed mixing shaft7,6-38,0/15,2-76 rpm Information LocationBarneveld Floorspace2,5 x 1,2 m Total height1,2 m Weight650 kgCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes  ...

Overview  This wrap-around carton packer was manufactured in 2008 by the German company MEYPACK. The machine is in very good condition and was used only occasionally, as the primary packaging method at the facility was plastic crates. It is already dismantled and stored in a warehouse and is available immediately. Technical data  Capacity: 60 packs/minute with 2x5 (10 bottles) 40 packs/minute with 4x5 (20 bottles) Packing type: Wrap-around carton box Carton dimensions: Length: 120 – 300 mm Width: 210 – 400 mm Height: 100 – 350 mm Formation of packs: 2x5 and 4x5 Scope of Delivery  Meypack VP 531WA wrap-around packer

General SKU050C389 Makeunknown, manufacturer tag is missing LocationBarneveld Material Shell materialStainless steel 1.4401 (316) Tube materialStainless steel Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface1.5 m2 Specified Features - Shell and tube heat exchanger Heat exchanger(1x) Heating surface± 1,5 m2 Number of tubes:25 Tube diameter24mm Tube length± 900mm Information Floorspace2,2x0,7 MCatalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicPlastic & polymersSpicesAgrochemicalsBiotechnologyRubberOther chemicalStarchFine chemicalsTea, herbs & coffeeOintmentsGene ...

Overview  This complete microbrewery system was manufactured in 2020 by German company Sudhausbau GmbH. The installation is a 5 hl, steam-heated, two-vessel brewhouse including milling, hot side, control system, steam generator, fermentation, storage, water treatment, cooling and accessories. The system is well maintained and comes with a functional guarantee upon delivery. Technical data  Brewhouse capacity: 5 hl Design: 2-vessel brewhouse Heating: Steam-heated Control: Semi-automatic PLC (Siemens) with touch panel Fermentation: Open fermenters with cooling jackets Scope of Delivery Malt Mill with Stand & Hopper | — | — | 2020 | For brewhouse feeding Brewhouse (Mash/Kettle + Lauter Tun) | Sudhausbau GmbH | — | 2020 | 5 hl, steam-heated, incl. platform & piping Plate Heat Exchanger | — | — | 2020 | Single-stage, stainless steel plates (1.4404) Water Mixing Station | — | � ...

General SKU274P408 LocationBarneveld MakeHellmich Behälter- und Apparatebau (DE) No.4973 Pressure Working pressure6 Bar Working pressure jacket2.5 Bar Main Features MaterialStainless steel Volume10500 Ltr. Motor15 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity13300 Ltr (netto ±10.500 Ltr.) Vessel sizesdia.2300mm x2700mm Dished bottomcheck Dished top sidecheck Manholedia.500mm Top connections(8x)dia.80mm, (3x)dia.50mm, dia.100mm Outletdia.100mm Half coil jacketed(488 Ltr) Max. temperature120°C. With paddle stirrertype FGRLR-80D Motor15 KW, 290/500 Volt Speed mixing shaft59 rpm Stainless Steel Reactors MaterialStainless steel 1.4541 (321) Information Year of construction1998 Mounted on legscheck Floorspace2,6x2,6 m Total height5,5 m Weight6000 kgCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceu ...

This 3-axis Mazak VERTICAL CENTER NEXUS 510C-II INFO was manufactured in 2008. It features a Mazatrol Matrix Nexus control unit and has a total operating time of 17,659 hours. The machine is equipped with advanced software options, including high smoothing control and various machining cycles. If you are looking to get high-quality machining capabilities, consider the Mazak VERTICAL CENTER NEXUS 510C-II INFO vertical machining centre we have for sale. Contact us for further details.

General SKU356S847 MakeEnco Energie Componenten GmbH (AT) Type509 ltr No.8317/1 Year of construction1996 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume509 Ltr. Motor0.55 KW Pressure6 Bar Vacuumcheck Specified Features - Stainless Steel Reactor Reactorcheck Capacity509 Ltr. Vessel sizesdia.800 x900mm Dished bottomcheck Dished top sidecheck ManholeHand hole DN200 Top connectionsDN125, DN100, (3x)DN80, DN50 OutletDN80 Half coil jacketed(64 lLtr.) Max. temperature-29/160 Degr.C, With propellor stirrercheck Motor0.55 kW 230/400 volt (Ex) Speed mixing shaft356 Rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Notified body(Tuv) Capacity509 Ltr Vessel sizesdia.800 x900mm Dished bottomcheck With covercheck ManholeD ...

; Power [PS]: 680; Gross weight [kg]: 14240; Engine: Battery System: LIFePO4; Accessories: Tanker, Control Panel, Wiring port: L1, L2, L3, N, PE, Power Input: , - AC socket: 3P/5W, 1x500kW, 5x16kW , - AC copper: 3P/4W, 500kW , - DC socket: 110kW, Power Output: , - AC socket: 3P/5W, 1x500kW , - AC socket: 1P, 1x16A; 3P, 1x32A , - AC copper: 3P/4

Engine Brand: CUMMINS, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 63 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 50 , Generator Hz: 50 , Generator Volts: 415 , Generator Amps: 69.6 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/cummins-4btaa3-3-g11-generator -50kva/87, , = More information =, , Empty weight: 1.296 kg, Type number: 4BTAA3.3-G11 GENERATOR 50KVA

Ref. no.: 18610 Manufacturer: DEMAG Year of construction: 2012 Clamping unit Clamping force: 160 ton Opening stroke: 495 mm Distance between tie bars: 520 x 520 mm Mould height min.: 275 mm Mould height max.: 585 mm Platen size (h x v): 760 x 785 mm Injection unit Screw diameter: 35 mm Injection volume: 156 cm³ Shot weight: 139 g Injection pressure: 2180 bar Measurements and weight Dimensions: 5,4 x 1,5 x 2,1 m Machine weight: 7600 kg Further information: The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes. All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely ...

Engine Brand: CUMMINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Beige , Working Hours: 5500 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 320 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 500 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 721,7 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/cummins-kta19-g3-generator-500 kva-used/637, , = More information =, , Empty weight: 3.500 kg, Type number: KTA19-G3 GENERATOR 500KVA

: neu : ca. 4 Monate ab Auftragse : Türkei : 27700 € : 529.07 € : Doppelsäulenführung : 6000x41x1,3 mm : 20-100 m/min : 560 mm : 560 mm : 750x560 mm : rund 410 mm, quadrat 410 : 590 mm : 1.1 kW : 4 kW : 0.12 kW : 3400 mm : 1000 mm : 2050 mm : 2045 kg 2° inclined band linear guides control panel material limit shaft coolant pump 1200 mm roller table hydraulic vice hydromechanic band tensioning inverter presser adjustment band brush optical height adjustment security switch operating manual in Englisch OPTION: turn table for mitre cuts hydraulic top clamping from above micro cooling unit laser cutting line The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 53900 € : 1018.71 € : Doppelsäulenführung : 7000x41x1,3 mm : 15 - 120 m/min : 560 mm : 540 mm : 810 x 530 mm : rund 520 mm, quadrat 520 : rund 520 mm, quadrat 520 : rund 330 mm, quadrat 330 : 875 mm : 1.1 kW : 4 kW : 0.12 kW : 3850 mm : 1700 mm : 2450 mm : 3400 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH (roller  ...

: neu : ca. 2 Wochen ab Auftragse : Italien : 17940 € : 344.45 € : Dm. 200x78x78 mm : 2800 1/min : 300 mm : 300x150x55 mm : 350x150 mm : 500x160 mm : 3.6 kW : 1020 mm : 820 mm : 2170 mm : 440 kg This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain t ...

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 7730 € : 149.19 € : 500 kg : 150 mm : 150 mm : 360 kgm : 230 / 50 V / Hz : 0.37 kW : 0.37 kW : 0.1 - 3 U/min : 45 s : 800 mm : M20X6 mm : 640 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating ...

Year of manufacture: 1999 | Control system: FANUC Series 18-T (dual-channel control) | Technical specifications | Max. bar diameter: 51 mm | Max. turning length: approx. 125 mm | Travel ranges: X1 / X2: 150 mm / 115 mm | Z1 / Z2: 380 mm / 125 mm | Y-axis: +/- 40 mm (upper turret) | Spindles (main & counter spindle) | Speed range: 135 - 5,000 rpm (both spindles) | Drive power: 11 kW / 15 kW (main spindle) | C-axis: 0.001° on both spindles for full contour machining | Tool system (2 x turrets) | Turrets 1 (top): 12 stations (all driven, incl. Y-axis) | Turrets 2 (bottom): 12 stations (all driven) | Spindle speed: max. 3,200 rpm | Loading magazine: IEMCA BOSS 552-HD | Diameter range: 5 mm to 51 mm | Bar length: up to 3,200 mm | Chip conveyor | Batec fire suppression system | The machine can be viewed by appointment. | Subject to changes and errors in the technical data and specifications, ...

turning diameter:500 mm turning length:1000 mm control:Siemens 840 D spindle:42 / 28 kW spindle turning speed - stepless:31 - 4000 1/min max. torque on the spindle:345 Nm c-axis:360000 x 0,001° feeds -stepless-:0 - 10000 mm/min rapid traverse:10000 mm/min turret stations / rotary tool stations:12/12 VDI 40 RPM of rotary tools:2000 1/min diameter of quill:90 mm quill stroke:80 mm tailstock quill taper ISO:SK 30 Tailstock Travel:600 mm Power rotary tools:3,5 kW :22,5 Nm Rotary tool holders:4 ax./ 4 rad. spindle passage:66 mm total power requirement:30 kW weight of the machine ca.:7,5 t dimensions of the machine ca.:8x 3 x 4 m

x-travel:630 mm y-travel:600 mm z-travel:650 mm control:MSC 502 (Fanuc 16) Spindle RPM:12000 1/min spindle drive:22 / 18,5 kW rapid travel x/y/z:32 m/min Pallet dimension:500x500 mm numbers of pallets:2 table load:0,5 t working diameter:max. 610 mm Number of tool station:60 BT40 max. tool length:360 mm max. tool weight:12 kg tool changing time:1,3 sec B-axis positioning (non continuous):1 total power requirement:50 kVA weight of the machine ca.:14 t dimensions of the machine ca.:3,3 x 5,8 x 3,2 m spindle load monitor:Typ C This horizontal machining center comes with a pallet changer with 2 pallets, and has the following options: ATC 60 tool stations, High pressure coolant trough spindle interface,

turning diameter:1600 mm turning length:12000 mm control:FAGOR 8050 Used CNC Lathe with FAGOR 8050 and extensive accessories. For further technical data and accessories, pls browse the Appendix. Parallellathe WMW mod. 4 GUIDE-WAYS ¦ CNC: FAGOR 8050 ¦ bed: monolithic ¦ centres height: 800 mm ¦ centres distance: 12000 mm ¦ swing over cross-slide: 1250 mm ¦ turret: automatic 4 positions ¦ tailstock: motorized ¦ tailstock connection: hydraulic ¦ platform: diam. 1000 mm ¦ steady rests: nr.02 ¦ chip conveyor Warranty: none Take advantage of the favorable leasing and hire-purchase terms from IKB Leasing. Ask us about it.

turning diameter:570 mm turning length:1000 mm dimensions of the machine ca.:3,25 x 2,03 x 1,95 m Tool disc turret for 8 tools with VDI 30. Not for power tools machine manual, technical documentation; Accessories: 3-jaw chuck, various tool holders Video is available

x-travel:630 mm y-travel:630 mm z-travel:500 mm number of spindle speeds:0 - 15000 spindle motor:32 kW size of pallet:500 x 500 mm b-axis:36000 x 0,001 ° no. of workpieces in the magazine:61 Stück tool taper:HSK 63 weight of the machine ca.:15 t Single-Spindle Mechanical processing cylinder head VR6

max. wheel diameter:210 mm total power requirement:60 kW weight of the machine ca.:8 t dimensions of the machine ca.:2,85 x 2,60 x 1,80 m grinding slide feed:700 mm grinding slide feeds:1-15.000 m/min max. workpiece weight:150 kg centre height:260 mm grinding wheel diameter:240 mm

max. wheel diameter:780 mm gear width:130 mm max. module:10 weight of the machine ca.:8,5 t no. of strokes:30 Hub/min Hier fully functional machine, Little used There are some Tools and Change gears Liebherr WSC501 CNC gear shaping machine, used, ready for use Manufacturer: Liebherr Type: WSC 501 Mach.- No.: 4407/05 Year of manufacture: 1985 Details: Max. gear shaping module: 8mm (30°gears possible up to module 10°) Max. gear width: 130mm Diameter of the machine table: 500mm Maximum wheel diameter: 780mm Shut height ? table: 650mm Stroke rate min. 30DH/min Continuously adjustable max. 1500 DH/min. Operating voltage: 380V Frequency: 50Hz Control voltage: 110V Connected load: 36 kVA Rated current: 55A Weight: 8500kg Dimensions: approx. 4,85 x 3,655 x 3,78 (width x depth x height in m) The machine has seen only very limited use in our company. It remains fully operational and can be dem ...

turning diameter:500 mm turning length:1500 mm spindle motor:16 kW Spindle RPM:1 - 2500 1/min taper in tailstock MT:5 tailstock quill stroke:160 mm tailstock quill diameter:70 mm total power requirement:22 kW weight of the machine ca.:3,2 t dimensions of the machine ca.:3,2 x 1,8 x 1,4 m Machine with Heidenhain Manual plus control - Multifix quick tool change device - 3-jaw chuck - sliding splash door - various accessories.

turning diameter over bed:500 mm turning diameter over slide rest:310 mm turning length:1500 mm spindle turning speed range:7 - 710 U/min feed range:5,6 - 224 mm/min total power requirement:15 kW weight of the machine ca.:3,7 t dimensions of the machine ca.:2,9 x 1,4 x 1,6 m Machine with 2-axis digital readout - MULTIFIX quick tool change device - 3-jaw chuck

Performance ·Max. motor power: 30 kW ·Max. engine speed: 10,000 rpm ·Rated torque (test bench): > 100 Nm ·Max. braking torque: up to 122 Nm ·Max. braking power: up to 46 kW (overload) Dynamometer ·Type: AC asynchronous dynamometer, frequency-controlled ·Voltage: 360 V ·Cooling: Forced ventilation (IC06) ·Protection class: IP23 ·Insulation class: F ·Speed range: 0 ? 10,000 rpm ·Continuous operation: up to 40 kW (depending on speed) ·Overload capability: 1 min every 10 min Measurement System ·Torque measurement: oHBM T12HP torque flange oMeasurement range: 200 Nm oAccuracy class: 0.02 ·Speed measurement: oIncremental encoder, 1024 pulses/rev oAccuracy: ±0.01 rpm ·Vibration monitoring: oIntegrated vibration sensor Mechanical Structure ·Slotted base plate with air suspension (Bilz air springs) ·Vibration-damped test bench ·Motor mounting system: oAdjustable aluminum fram ...

turning diameter over bed:570 mm turning diameter over slide rest:365 mm turning length:2.000 mm feed per revolution:0,06 - 58/ 0,03 -28 mm spindle turning speed range:11,2 - 2.240 U/min spindle bore:62 mm spindle head:8 nach DIN 55022 total power requirement:15 kW dimensions of the machine ca.:4,5 x 1,5 x 1,4 m weight of the machine ca.:4,8 t

turning diameter:500 mm turning length:1000 mm control:MANUAL PLUS Grundig total power requirement:24 kVA weight of the machine ca.:2650 kg dimensions of the machine ca.:2500 x 1750 x 1850 mm swing diameter over face slide:290 mm chuck:Ø max. 260 mm cross movement:260 mm spindle head:DIN 55027 Größe 8 spindle bore diameter:70 mm rapid travel - longitudinal/face:8 /6 m/min spindle speeds::8 - 2800 tailstock travel:180 mm tailstock quill taper MT:5 Documents:vorhanden

turning diameter:500 mm turning length:1000 mm control:MANUAL PLUS Grundig total power requirement:24 kVA weight of the machine ca.:2650 kg dimensions of the machine ca.:2500 x 1750 x 1850 mm swing diameter over face slide:290 mm chuck:Ø max. 260 mm cross movement:260 mm spindle head:DIN 55027 Größe 8 spindle bore diameter:70 mm rapid travel - longitudinal/face:8 /6 m/min spindle speeds::8 - 2800 tailstock travel:180 mm tailstock quill taper MT:5

turning length:2000 mm control:- total power requirement:25 kW weight of the machine ca.:3 t dimensions of the machine ca.:3800 x 1800 x 1850 mm swing over bed:500 mm swing diameter over face slide:280 mm control:Zyklen-Steuerung Heidenhain bed width:350 mm Documents:vorhanden

grinding length:600 mm grinding width:250 mm workpiece height:380 mm :Sinumerik max. dia. of grinding wheel:300 mm weight:4000 kg total power requirement:12,5 kW grinding wheels:Ø 400 mm max. width of grinding wheel:100 mm grinding wheel hole diameter:127 mm turning speeds:470 - 12030 1/min x-axis:600 mm y-axis:300 mm z-axis:250 mm grinding range:450 x 200 mm distance spindle nose and table:500 mm table load:250 kg dimensions of the machine ca.:2600 x 2100 x 2400 mm switchgear cabinet:1300 x 800 x 2000 mm hydraulical unit::450 x 350 x 500 mm Documents:vorhanden

x-travel:800 mm y-travel:950 mm z-travel:1020 mm control:HEIDENHAIN iTNC 530 table load capacity:800 kg tool taper:HSK 63 turning speeds:16.000 1/min spindle:35 / 25 kW table-size:770 mm max. torque on the spindle:160 / 223 Nm tool change unit:120 (2x60) Pos. weight of the machine ca.:20 t dimensions of the machine ca.:3,3 x 6,15 x 3,2 m 5-axis simultaneously machining center with controlled swivel-rotary table (A/B-axis), milling head horizontal, internal coolant device (10-80bar), oilmist-suction, electromech. tool-length measuring device GROB, chipconveyor, 3D touch probe, KINEMATICOPT, BLUM laser, el. handwheel, hour meter: approx. 82.000 h "machine on", approx. 48.800 h "spindle on"

turning diameter over bed:570 mm turning diameter over slide rest:365 mm turning length:2000 mm feed per revolution:0,06 - 58 / 0,03 - 28 mm spindle turning speed range:11,2 - 2240 U/min spindle bore:62 mm spindle head:8 nach DIN 55022 total power requirement:15 kW weight of the machine ca.:4,8 t dimensions of the machine ca.:4,5 x 1,5 x 1,4 m with digital readout HEIDENHAIN rapid feed, MULTIFIX toolholder system fixed steady dia. 160 mm 3 jaw chuck RÖHM TR 250 coolant attachment diverse toolholders, diverse jaws