4 rolls bending used for sale

sheet width: 700 mm plate thickness: 2,0 mm distance between columns: 750 mm diameter of upper rolls: 76 mm total power requirement: ß,75 KW weight of the machine ca.: 0,29 t dimensions of the machine ca.: 1,3 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Upper and lower roller driven, feed roller without drive - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 5648 Type: XOTM 60 Producer: UNIT Created: 2004 Parameters: Minimum tube diameter: 20 mm Maximum tube diameter: 60 mm Machine length: 4900 mm Machine weight: 130 kg

SECOND HAND BENDING PRESS - plates dimensions mm. 3100X800 - opening mm. 800 - 8 cyl. diam. 80 mm.

Inv. Num. : 1609 Type: CB90VZB SL 6000 Producer: DYNOBEND B.V. Created: 2013 Parameters: Control system: IGES Maximum tube diameter: 100 mm Maximum bending angle: 200 h Precise bending: 1/10 st Number of axles: 3 pieces Maximum bending length: 6300 mm Tube rotation: 360 pcs Strength: 70 kN Repeatability: 0.1 mm Programmable speed Compatible with systems: Windows. Novell and Linux Process Planning Software 3D bends Tools for bending pipes with a diameter of 76 and 70 mm

Inv. Num. : 3168 Type: SE 80.3 Producer: RASI Created: 2003 Parameters: Minimum tube diameter: 4 mm Maximum tube diameter: 82 x 2.6 mm Minimum bending radius: 34 mm Maximum bending radius: 228 mm Maximum bending angle: 195 h Total power requirement: 11 kW Maximum bending length: 3-6 m Maximum resistance torque: 12.7 cm³ Operating voltage: 400 V Control voltage: 24 V Feed speed: 0-60 m/min Machine height: 1200 mm Machine length: 7000 mm Machine width: 1300 mm Equipment: Bending tools

- Round tube steel DM 6 – 42 x 5 mm - Round tube stainless steel DM 6 – 42 x 3 mm - Pipe push-on length max. 6,000 mm - Programmable logic controller up to 20 angles - Digital display of longitudinal displacement - Digital display of torsion - Programmable, anticipatory mandrel retraction - Mandrel lubrication system by hand pump - Wrinkle smoother receptacle - Bending speed max. 13°/sec - Bending angle up to 180° + 10° deflection - Manual feed - Manual twisting - Right bending direction - Radii from 1.5 D - Incl. bending tool : - DM 12 mm - radius 36 mm ) / DM 15 mm - radius 37.5 mm - DM 18 mm - radius 36 mm - DM 22 mm, radius 44 mm with mandrel - DM 42 mm, radius 44 mm with mandrel

CNC – controlled profile and tube bending machine for demanding and precise bending work with hollow sections and tubes. With our machines, aluminium – steel / stainless steel – various plastics such as PVC window profiles (depending on the application) can be bent with repeatable accuracy, regardless of the material. Depending on the equipment, our machines can also be used for three-dimensional bending work. Our REPANDUS models can work both horizontally and vertically. The models of the REPANDUS series work with a fixed upper roller and two movable lower rollers – this means that the straight end piece is relatively short compared to machine concepts with fixed lower rollers. The machine body is made of vibration-absorbing cast steel Shaft diameter of upper and lower rollers Ø 70 mm Shafts made of special steel – hardened and ground Bending force 190 kN Maximu ...

CNC – controlled profile and tube bending machine for demanding and precise bending work with hollow sections and tubes. With our machines, aluminium – steel / stainless steel – various plastics such as PVC window profiles (depending on the application) can be bent with repeatable accuracy, regardless of the material. Depending on the equipment, our machines can also be used for three-dimensional bending work. Our REPANDUS models can work both horizontally and vertically. The models of the REPANDUS series work with a fixed upper roller and two movable lower rollers – this means that the straight end piece is relatively short compared to machine concepts with fixed lower rollers. The machine body is made of vibration-absorbing cast steel Shaft diameter of upper and lower rollers Ø 70 mm Shafts made of special steel – hardened and ground Bending force 190 kN Maximu ...

Offer 24126 Specifications: - Bending process mot. with automatic or manual operation - Bending capacity square bar ST 37 up to approx. 30 mm - Bending capacity flat bar ST 37 up to approx. 30 x 8 mm - Bending length between the twisting units adjustable up to approx. 1200 mm - Min. twist length 10 x material thickness ( long side ) - Bending time preselection / bending length twist preselection - Right – counterclockwise -Tailstock - Elbow + ring bending device GRB 66 with various roller sets - Bending performance - flat steel 60x10 mm high, R 700 mm - Flat steel 70x12 mm flat R 500 mm - Round tube 1 1/2" x 2 R 800 mm - Square tube 40x40x3 R 1500 mm - Angle 45x6 R 600 mm - Round tube roll sets steel 1 1/4" , plastic 1 1/2" - Standard roller set - Space requirement approx. W 1850 x H 1300 x D 700 mm - Drive 400 V / 2.2 kW ...

Bending tool, die, upper blade, upper tool -Tool: for press brake, 4-piece set -Tool: 90° -Dimensions: 98 x 27 mm -Dimensions: see drawing in the photos -Total length: 1977 mm -Lengths: 2x 1015/ 1x 545 / 1x 417 mm -Transport dimensions: 1015/200/H55 mm -Weight: 42.6 kg

Motorized Rounding Machine Foot Holder one. Rear angle infeed Emergency stop leash very good condition Colour: grey Total power requirement 16 A Shaft diameter: 65 mm Capacity: 1020x1.5 mm Weight: 300 kg Machine number: 05 125 001 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

Key data: 220 t, 4000 mm

with CNC-controlled crowning LazerSafe Safety system Foot pedal with standard tool set Machine in little-used condition Colour: turquoise/grey Total power requirement:f 15 kW Projection: 400 mm Stand width: 3150 mm Drive power: 400 V Back gauge: 625 mm Flow speed: 130 mm/sec Working speed: 8 mm/sec Retraction speed: 85 mm/sec Stroke length min./max:. 260 mm R-axis 150 mm Dimensions: 5100 x 1920 x 3080 mm Weight: 12250 kg Machine Number:M00000948 LZ: approx. 8 - 10 weeks, machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out.

Bending tool, die, upper blade, upper tool, straightening tool -Tool: split, for press brake -Tool angle: 90° -Dimensions: see drawing in the photos -Dimensions: 38 x 256 mm -Total length: 148 mm / 1 x 78/70 mm each -Weight: 8 kg

Key data: 2000 mm, 1 mm, 2000 mm

Electric bending machine Schechtl 2000x1.25mm with 6-way control, in good condition. The machine can be loaded with a forklift. You will receive a proper invoice with VAT, price net 6900.-. Shipping possible throughout Europe. Please call us or send us a wading app.

Key data: 200 mm, 1 mm, 200 mm

Sell here an electric Schechtll bending bench with 6-way control and a matching 2m hand-held guillotine shears. Price net, you will receive an invoice with VAT.

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, 3-piece -Tool angle: 90° -Dimensions: see drawing in the photos -Dimensions: 39 x 250 mm -Total length: 1265 mm / 1 x 500/400/365 mm each -Weight: 65 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake -Tool angle: 90° -Dimension: 37 x 255 mm -Dimensions: see the drawing in the photos -Length: 100mm -Weight: 4.9 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Tool angle: 40° -Dimensions: see drawing in the photos -Dimensions: 23 x 234 mm -Length: 50 mm -Weight: 1.9 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake -Tool Angle: Radius 12.5mm -Dimensions: see the drawing in the photos -Dimension: 22 x 262mm -Length: 750mm -Weight: 32 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, tube bending tool -Pipe Bending Tool: 1 piece -Profile diameter: 3/8 -Intake: Ø 36 mm -Dimensions: 100/75/H50 mm -Weight: 1.2 kg

Base for bending tool, bending tool, die, lower knife, lower tool, prism tool -Lower tool: for press brake -Total length: 3020 mm -Prism: 20 mm x 90° -Dimensions: see drawing in the photos -Total dimensions: 3020/65/H110 mm -Weight: 136 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet for bending tools, dies, upper knives, upper tools, straight tools -Tool cabinet. Drawer cabinet, sturdy design -2 drawers/3 shelves: layout/height see photos -lockable: with 1 key -Dimensions: WTH 640/930/H1215 mm -Weight: 177kg

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 3 parts -Tool angle: 90° / 3 mm flat -Dimensions: see drawing in the photos -Dimension: 75 x 119 mm -Total length: 2505 mm / 3 x 835 mm -Total weight: 63.2 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 8 pieces -Tool angle: 90° / 3 mm flat -Dimensions: see drawing in the photos -Dimension: 80 x 119 mm -Total length: 835 mm / 1x 400/200/100/50/40/20/15/10 mm each -Total weight: approx. 22 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 9 pieces -Tool angle: 35° -Dimensions: see drawing in the photos -Dimension: 26 x 120 mm -Total length: 835 mm / 1x 400/170/100/50/40/30/20/15/10 mm each -Total weight: 11 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 5 pieces -Tool angle: 35° -Dimensions: see drawing in the photos -Dimension: 26 x 120 mm -Total length: 1615 mm / 1x 670/465/250/170/60 mm each -Transport dimensions: 720/220/H50 mm -Total weight: 24 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 4 pieces -Tool angle: 40° -Dimensions/lengths: see drawing in the photos -Transport dimensions: 1000/130/H70 mm -Total weight: 32.1 kg

used, technically overhauled reinforcing steel bending machine. Rotations of the bending disc 8/16 rpm. Connection 16 A Single bending max. 1 piece of reinforcing steel 38mm D., 2 pieces of reinforcing steel 28mm D. Standard bending tool 2 pieces of foot switch with emergency stop function.

Brand Lisec Type BSV-45 Fashion model Frame Bending Machine Chassis number 154.11.10.10.0792 Construction year 1992

PROFI PH 50-3H / 3-roll round bending machine If you want to bend profile or tube material, the Profi Bend is the best choice! With this profile bending machine, you can bend a wide variety of profiles into almost any desired radius. Made in Europe. Shaft diameter: 50 mm Roller diameter: 150 mm Shaft revolutions: 10 rpm Connected load: 400 V / 50 Hz Drive motor: 1.5 kW Feed distance: 120 mm Weight: 355 kg Dimensions: 1100x800x1400 mm Delivery & Payment

Control Thrust... 80t Bending length ... 2620mm controlled axes ... 4 Plunger stroke... 200mm Machine weight ... 5750kg The machine is in good condition, possible to test under power.

Used, technically overhauled reinforcing steel bending machine. Rotation of the bending plate 5/7.5/10/15 Power requirement 3.15/3.65 KW 2 footswitches with emergency stop function. Bending capacity max. 1 piece 45mm D. Reinforcing steel or 3 bars 28mm D. The control system is upgraded to Siemens Touch Display CC. Latest standard. 1 set of standard bending tool.

- min/ max bending thickness 10/60 mm - bending width 4500 mm - weight of bending rolls 172 t - dimensions L11,19 x W5,08 x H5,6 m

2000mm 66 ton Y1 Y2 R1 Z1 Z2 X1 X2 Excellent condition With tooling

Inv. Num. : 7914 Type: PBM 7074 Producer: WEGENER Created: 2015 Parameters: Control system: Siemens Maximum bending angle: 90

Max. pressing force: 200 kN Max. tool height: 100 mm Manual and automatic mode possible With Siemens program control Operating instructions

Key data: 1000 mm, 1 mm

with rebate groove and wire insertion grooves Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 1000 mm Sheet thickness: 1.0 mm . Colour: blue Machine weight: 45 kg Space requirement: 1200 x 400 x 1000 mm Shaft diameter: 50 mm

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, length 2020 mm -Tool angle: radius 5 mm -Dimensions: see drawing in the photos -Dimensions: 2020/27/H95 mm -Weight: 23.4 kg

P4.1812 Servo-controlled panel bender LS Upper bending blade LI Lower Bending blade MLA.ZR Manual length Adjustment of Blankholder CLA Long Tab Bendging Unit HP12015 R81 Chiller Max. length at entrance: 1850mm. Max. width at entrance: 1500mm. Minimum length at entrance: 285mm. Minimum width at entrance: 190mm. Maximum diagonal: 2150mm. Maximum width at exit: 1500mm. Maximum reference dimension: 2000mm. Minimum sheet thickness: S min: 0,50mm. Maximum sheet thickness, Mild Steel (max. 410 N/mm2): Max: 2,00mm Maximum sheet thickness, Stainless steel (max. 600 N/mm2): Max. = 1.25mm Processing of pre-painted material Smax= 3,00mm. Maximum tool length for CLA option: 1000mm.

Used machine in good condition. Available for immediate delivery. - Operating hours: 54.860 - Pressure force: 50 t - Bending length: 1.275 mm - Axes: 6 - Distance between uprights: 1.750 mm - Working speed: 1-10 mm/seg - Throat: 410 mm - Stroke max: 215 mm - Power: installed max: 7,5 kW - Dimensions (long x wide x high): 1.930 x 2.030 x 2.375 mm - Weight: 4.750 kg

Used machine in good condition. Available for immediate delivery.

Used machine in good condition. Available for immediate delivery. - Type: Hybrid - Operating hours: 23.850 - Pressure force: 140 t - Bending length: 3.060 mm - Axes: 6 - Distance between uprights: 2.600 mm - Returning speed: 160 mm/seg - Working speed: 10 mm/seg - Throat: 510 mm - Oil tank capacity: 80 l - Weight: 9.500 kg - Dimensions (long x wide x high): 3.950 x 1.875 x 2.600 mm

Used machine in good condition. Available for immediate delivery. - Operating hours: 34.027 - Control: Siemens Sinumerick 840D NC - Bending length max: 2.500 mm - Length min between the bends: 350 mm - Width min between the bends: 160 mm - Bending height max: 200 mm - Min length sheet: 370 mm - Max length sheet: 2.850 mm - Min sheet width: 180 mm - Max sheet width: 1.500 mm - Bending width max: 1.500 mm - Number of bends per side max: ilimitado / unlimited - Material thickness min: 0,5 mm - Maximum material thickness aluminium: 4 mm - Maximum material thickness steel: 3,2 mm - Maximum material thickness stainless steel: 2 mm - Max panel diagonal: 3.000 mm - Angle tolerance: +/-0?25 C? +- - Bending angle: -135? ... +135? C? - Bending tolerance: +/-0,15 mm +- - External bending radius min: 1,5/2 x espesor chapa / sheet width mm

Used machine in good condition. Available for immediate delivery. - Operating hours: 16.304 - Pressure force: 150 t - Bending length: 3.100 mm - Axes: Y1, Y2, X, R, Z1 & Z2 - Distance between uprights: 2.750 mm - Working speed: 10 mm/seg - Returning speed: 150 mm/seg - Locking speed: 150 mm/seg - Throat: 315 mm - Stroke max: 215 mm - Power: installed max: 11 + 15 kW - Weight: 9.800 kg - Dimensions (long x wide x high): 3.910 x 1.900 x 2.660 mm

Used machine in good condition. Available for immediate delivery. - Type: TASC 6000 - Pressure force: 86,68 t - Bending length: 2.720 mm - Axes: 6 - Working area: 860 x 2.210 mm - Working speed: 25 mm/seg - Control: 24 - Stroke max: 215 mm - Weight: 8.200 kg - Dimensions (long x wide x high): 3.100 x 1.740 x 2.840 mm

Used machine in good condition. Available for immediate delivery. - Open Height: 1.000 mm - Inclination of beam: +- 3 mm - Backgauge movement: 800 (X) mm - Operating hours: 21.428 - Type: hydraulic - Pressure force: 120 t - Bending length: 3.110 mm - Axes: X, Y, R, Z1 & Z2 manual - Working area: 200 (Y), 600 (X), 880 (max. X), 320 (R) mm - Distance between uprights: 2.690 mm - Working speed: 200 (Y) / 500 (X) / 250 (R) / 1.000 (Z) mm/seg - Returning speed: 180 (Y) mm/seg - Throat: 420 mm - Control: T 3000 - Oil tank capacity: 200 l - Power: installed max: 27 kW - Weight: 8.300 kg - Dimensions (long x wide x high): 3.600 x 1.750 x 2.330 mm

Used machine in good condition. Available for immediate delivery. - Type: electrical - Pressure force: 105 t - Bending length: 3.050 mm - Axes: 8 - Working area: 200 - 2.880 mm - Distance between uprights: 3.150 mm - Working speed: 10 (Y) / 350 (X) / 2.000 (Z) / / 150 (R) mm/seg - Frame type: O-frame - Returning speed: 110 mm/seg - Throat: O-frame mm - Stroke max: 310 mm - Weight: 7.700 kg - Dimensions (long x wide x high): 4.406 x 2.555 x 2.555 mm

with BendMaster - Operating hours: N/A - Table width L -R: 120 mm - Inclination of beam: +-10 mm - Pressure force: 130 t - Bending length: 3.060 mm - Axes: 6 (Z1, Z2, X1, X2, R1 y R2) - Distance between uprights: 2.690 mm - Working speed: 1-10 (Y) mm/seg - Working speed: 500 (X) mm/seg - Working speed: 300 (R) mm/seg - Throat: 410 mm - Control: TRUMPF - Stroke max: 215 mm - Oil tank capacity: 250 l - Power: installed max: 18,5 kW - Dimensions (long x wide x high): 3.640 x 2.210 x 2.375 mm - Weight: 11.250 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Type: Item No.: 12 00 00 204 RT8 -Profile diameter: 25 mm / 1 -Dimensions: see photos -Dimensions: 175/140/H82 mm -Weight: 3.8 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Profile diameter: 47 mm -Mounting: Ø 33 mm -Dimensions: see photos -Dimensions: Ø 125 x 84 mm -Weight: 4.3 kg