1 mw gas used for sale

adjustable gearbox, variable speed gearbox -adjustable -Design: B5 -Angle gear ratio: 1:15 -Inlet shaft diameter: 19 mm -Output shaft diameter: 25 mm hollow shaft -Weight: 26 kg

Surface Grinding Machine FAVRETTO MC130, 1300x700 mm, magnetic plate, sistem Digit Plus FAVRETTO, Information about technical data are not binding., Machine available subject to prior sale., Max working dimensions: 1500x750 mm, Working table size: 1300x500 mm, Longitudinal travel x axis: 1640mm, Cross travel y axis: 650 mm, Clearance between worktable and spindle axis: 850 mm, Feed rate x axis: 1 - 40 m/1, Feed rate y axes: 0 - 2000 m m/1, Wheel speed: Stepless by Variable speed drive AC, Wheel dimension: 400x152,4x100 mm, Spindle motor power: 15Kw, Nc: Digit FAVRETTO, Weight: 8.000 Kg, Accessories: Electro permanent magnetic plate 1300x500 mm, coolant tank with paper filter

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Power: 0.75 kW -Input: 1 x 200 - 240 V - 50/60Hz -Output: 3 Ph : 380/460 V -Number: 1x converter available -Weight: 3.4 kg

Key data: 504 KW, 630 kVA, 400 V

We offer for sale an MTU 12V2000 diesel emergency power generator: Specifications: Engine: MTU Type: 12V2000 Power: 504 kW Speed: 1500 rpm Voltage: 400 V Cos phi: 0.8 Frequency: 50 Hz Year of Make: 2005 Operating hours: 800 h Condition: Good Dimensions: BXHXL = 2450X3,000X12,000 mm Weight: 18,000 kg

turning diameter: 1020 mm turning length: 4000 mm turning diameter over slide: 720 mm Holder Multifix: control: Siemens type: 805 tailstock quill taper MT: 6 transmission ratio: 2 turning speeds: U/min turning speeds: U/min bed width: 560 mm spindle bore: 200 mm workpiece weight: kg faceplate: 1000 mm make: Forkhardt PSA 1000 3 jaw chuck Forckrath: 500 mm steady: 263 mm steady: 500 mm total power requirement: KVA weight of the machine ca.: t dimensions of the machine ca.: 7,4x2,5x2,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine vice, sturdy vice, drill press vice -Jaw width: 200 mm -Jaw height: 63 mm -Clamping depth: max 165 mm -Weight: 35 kg

Steel holder, clamping plate with T-slot -Tool height: max. 45 mm -Dimensions: 260/160/H220 mm -Weight: 26 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 160 mm -Clamping depth: max. 100 mm -Dimensions: 460/170/H120 mm -Weight: 40 kg

Control PC-NC Dialog Travel X/Y/Z: 1000/1510/700 mm C-axis 30-fold electrode changer Hirschmann clamping system Bearing surface WxD 1140/1640 mm Load capacity 7500 kg Filter system Fire extinguishing system

used spiral mixer Kemper SPA125 extendable with 2 stainless steel kettles and 2 new timers from Schleicher new immediately available from stock Bielefeld. Trade-in and shipping costs on request. We are constantly looking for and buying bakery machines of all kinds, please offer everything. - Type: SPA125 - with 2 boilers - for max. 125 kg flour or for max. 200 kg dough - With 2 automatic timers (new) - Kettle diameter 90 cm - Boiler capacity: 300 litres - Boiler drive via friction wheel - Boiler can be manually locked -extendable - With 2 timer relays automatically - 2 speed settings: fast and slow - Flour dust cover - Stainless steel spiral and tool - Boiler also made of stainless steel - Machine is anchored to the ground with 2 screws - Machine head moves up or down when the boiler is retracted and retracted - 400 volt power connection - Robust and stable machine  ...

Two head paperdriller Make Hang Model 136DK Year 1990 Details 2 head paper driller with fixed 80 mm distance with tabulator Operation Electric footswitch Available Direct

Machine vice, sturdy vice, drill press vice -Vise: rotatable -Jaw width: 160 mm -Clamping depth: max. 110 mm -Dimensions: 470/180/H155 mm -Weight: 35 kg

Machine vice, sturdy vice, drill press vice -Baking extra long baking tray -Jaw width: 400 mm -Clamping depth: max. 130 mm -Weight: 40 kg

Sourdough - Fast - Fermenter Model: Hema BRSSF 100 with external LED control approx. 20 - 100 kg total rye flour for approx. 60 kg sourdough with timer Stainless steel version, mobile Agitator removable at the bottom Connection 400V, 1.5 kW, 16A-CEE plug Dimensions: 640 x 700 x 1250 mm Used machine cleaned 3 months warranty + spare parts service Option: Maintenance contract Service Package Instruction & Commissioning You will find a large selection of bakery equipment with us!

Machine vice, sturdy vice, drill press vice -Jaw width: 150 mm -Clamping depth: max. 160 mm -Dimensions: 500/270/H170 mm -Weight: 40 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 220 mm -Clamping depth: max. 140 mm -Weight: 60 kg

Spiral mixer Diosna Model: SP 120 D kneading machine mobile with brake, 2 timers, 2 gears, Stainless Steel Boiler and Spiral Dough machine with return button Flour dust hood for max. 120 kg of dough, Dimensions: 800 x 1270 mm WxD Connection: 400 V, 16A, 32A-CEE plug Used machine cleaned Option: Maintenance contract Service Package Delivery Instruction & Commissioning Many more spiral mixers in stock!

Machine vice, sturdy vice, drill press vice -Jaw width: 200 mm -Clamping depth: max. 170 mm -Dimensions: 550/200/H165 mm -Weight: 50 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 170 mm -Clamping depth: max. 120 mm -Dimensions: 480/170/H130 mm -Weight: 30 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 170 mm -Clamping depth: max. 110 mm -Dimensions: 600/200/H120 mm -Weight: 55 kg

Spiral mixer Diosna Model: SP 120 D kneading machine mobile with brake, 2 timers, 2 gears, Stainless Steel Boiler Dough machine with return button Flour dust hood in silo design for max. 120 kg dough, ( depending on TA ) Dimensions: 800 x 1270 mm WxD Connection: 400 V, 6.5 kW, 14A, 32A-CEE plug Machine Option: Maintenance contract Service Package Instruction & Commissioning Warranty Many great spiral mixers in stock!

Machine vice, sturdy vice, drill press vice -Jaw width: 180 mm -Clamping depth: max. 110 mm -Dimensions: 550/190/H180 mm -Weight: 50 kg

Machine lamp, machine lamp, work area lamp -Lights: are not used -Dimensions: 545/185/H150 mm -Connection: 24 V DC 1x36W -Number: 14x lights available -Price: per piece -Weight: 8 kg/piece

Tailstock counter bearing for dividing head, dividing apparatus -Peak height: 95-115 mm -Recording: MK2 -Dimensions: 180/100/H110 mm -Weight: 4 kg

Two head paperdriller Make Hang Model 136D Year 1970 Details 2 head paper driller with fixed 80 mm distance with tabulator Available Direct

Wide belt sanding machine for wood, veneer and varnish Ernst LBK 1300 Grinding width: 1300mm Transverse grinding unit Longitudinal grinding unit

Machine vice, sturdy vice, drill press vice -Jaw width: 215 mm -Clamping depth: max. 130 mm -Dimensions: 550/220/H125 mm -Weight: 50 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 190 mm -Clamping depth: max. 160 mm -Dimensions: 630/200/H160 mm -Weight: 55 kg

starter Manufacturer: Bosch -Voltage: 24 V -000 1416 002 -Teeth: 9 -Weight: 15 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 160 mm -Clamping depth: max. 105 mm -Dimensions: 450/160/H125 mm -Weight: 38 kg

Spiral mixer Sinmag Model: SM-120 T with rewind button Dough machine with 2 timers 2 gears, boiler left & right for min/max. 9 - 120 kg dough Flour dust hood Stainless steel boiler and spiral Machine mobile with 4 brakes Connection 400V, 9.55 kW, 32A-CEE plug Dimensions: 750 x 1230 x 1400/1920mm, WxDxH Machine Come to our large bakery equipment exhibition!

Machine vice, sturdy vice, drill press vice -Jaw width: 160 mm -Clamping depth: max. 105 mm -Dimensions: 450/160/H125 mm -Weight: 38 kg

Universal milling angle head, milling angle head -Receptacle: Collet -Recess inlet: Ø 160 mm -Bolt circle: 174 mm -Milling spindle: 45° -fully swiveling -Dimensions: 200/185/H320 mm -Weight: 20 kg

Machine vice, sturdy vice, drill press vice -Vise: rotatable -Jaw width: 160 mm -Clamping depth: max. 105 mm -Dimensions: 460/310/H160 mm -Weight: 50 kg

Clamping plate with T-slots, plate field, welding table, welding table, plate boring mill -Width: 1100 mm -Length: 1300 mm -Height: 200/100 mm -Working height: 820 mm -with supporting ribs -Groove width: 24 mm -Weight: approx. 1000 kg

Dough Machine Kneader Werner & Pfleiderer WP DK 100 double conical mixer Tank car extendable with timer Flour dust cover Connection 400V, 16A-CEE plug Machine We carry a wide range of dough machines!

Wide belt grinding machine Boere Elite 1300 BK Grinding width max. 1300mm Grinding calibration roller from below

Clamping plate with T-slots, plate field, welding table, welding table, plate boring mill -Width: 1100 mm -Length: 2250 mm -Height: 200/100 mm -Working height: 820 mm -with supporting ribs -Groove width: 24 mm -Weight: approx. 2000 kg

alternator -Type: 0986 031 190 -28 V -Weight: 5 kg

Dough machine Kemper Model: F 125 for max. 200 kg dough / 125 kg flour Stainless steel kettle and kneading arm 2 gears, 1 timer Lifting mixer with flour dust hood NEW Machine mobile with brake DGUV V3 tested Connection 400V, 16A-CEE plug Dimensions: 1110 x 1140 x 1310/2050mm, WxDxH Used machine overhauled with 6 months warranty + service Option: Maintenance contract E-Box Service Package Instruction & Commissioning We have more lifting kneaders in stock!

Tires, tractor tires, lawnmower tires -Tire size: 15x6.00-6 -Quantity: two pieces available -Price: per piece -Dimensions: Ø 340 mm height 140 mm -Weight: 4 kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Movitrac: 204 xv -Power: 4 kW -U: 400 VAC -F: 25 kHz -I: 10 A Ac -P: 4 kW -Dimensions: 130/350/H210 mm -Weight: 7 kg

Inkjet Printer Videojet 1520/1560/1630 Different types Type 1520 Type 1560 Type 1630 Various consumables available (1 pallet) A total of 25 pieces Very good condition, straight from the production

Contactor, semiconductor contactor, contactor -Quantity: 8 pieces available -Price: per piece -Weight per package: 1 kg

Contactor, semiconductor contactor, contactor -Type: B 105 -Power: 220 V AC 22 kW -Quantity: 3 pieces available -Price: per piece -Weight per package: 3 kg

Contactor, semiconductor contactor, contactor, power contactor -Max. 15 kW 400 V AC-3 -24 V -Price: per piece -Quantity: 2 pieces available -Weight: 2 kg

Offer 24559 Specifications: - max. working width 1100 mm - max. cutting capacity - at 400 N/m² strength 20 mm - Cutting angle 1°30' - Cutting gap adjustment via hand lever - Number of hydraulic hold-downs 7 pcs - Manual backgauge 10 - 1000 mm - Front angle stop - Front support arms - Stroke rate 13 rpm - Drive 400 V / 45 kW - Table height 700 mm - Space required including back gauge, without front support arm -ca. W 2100 x H 2250 x D 2250 mm - Weight approx. 7500 kg - with: - E-foot switch - Cut line illumination

Basic dimensions: Width: approx. 2,890 mm Depth: approx. 1,100 mm Height: approx. 1,000 mm Note: - The images are used to illustrate the material. - The material color may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days. The scope of delivery includes: 02x Workbench stand, used Material colour: sendz. galvanized Stand height: 1,000 mm Stand depth: 1,100 mm Profile dimensions: 90 mm Incl. cross and diagonal struts, base plates The stands are pre-assembled ( bolted truss ) 04x Workbench crossbar, used Material colour: yellow Box profile: 120 x 50 mm Clear width: 2,700 mm 08x Screw M10x35 08x Nut Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only a ...

Control amplifier, servo motor control -DTT 10/330 V -9.2 V/1300 -Weight: 6 kg

Dematic conveyor accumulating roller conveyors 2625-500-440 RA1995 Accumulating roller conveyor Nominal/outer width (NB): 500 mm Available conveyor lengths (FL): 2625 mm, expandable with further pieces Further information Manufacturer: Siemens Dematic Type: Accumulation roller conveyor Accumulation size: 750 mm Year of manufacture: unknown Condition: good (used) roller width (RB): 440 mm roller pitch: 125 mm variable drive type: SEW gear motor weight of conveyed material: up to 30 kg Accumulating mechanics: Light barriers with pneumatic valve and cylinder The following accessories are optionally available e.g.: Frequency converter supports side guides Price: on request plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-400 condition: very good (used) Conveying length in mm: 2625 Nominal / outside width in mm: 500 Roll width in mm: 440 Ro ...