british flag
Resale Logo

palletwagen hpt used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information machine tools and sheet metal working machines  Wirths GmbH  http://www.wirths.net 
banner logo
start page > keywords palletwagen hpt > results
6 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1 
122462805 1102

MITSUBISHI S12 HPTA for sale


FOR SALE MITSUBISHI S12 HPTA COMPLETE ENGINE TO WHOM IT MAY CONCERN; WE VE COMPLETE ENGINE MITSUBISHI S12 HPTA AT OUR STOCK PLS FIND ENGINE SPEC ON BELOW TYPE S12 HPTA NO. 30069 YOB 1999 POWER 890 ...
used machine
 
FOR SALE MITSUBISHI S12 HPTA COMPLETE ENGINE



TO WHOM IT MAY CONCERN;



WE VE COMPLETE ENGINE MITSUBISHI S12 HPTA AT OUR STOCK

PLS FIND ENGINE SPEC ON BELOW

TYPE S12 HPTA
NO. 30069
YOB 1999
POWER 890KW
REV 1500 RPM

WE CAN DISMANTLE ENGINE AND WOULD BE OFFER ENGINE PARTS (CYLINDER HEADS PISTONS LINERS CRANK SHAFT ENGINE BLOCK TURBO CHARGERS ETC)

EX STOCK IZMIR TURKEY READY TO SHIPMENT.

IF YOU'VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US.

Capt. Ayhan Ugurluba

BEST regards;

Aliaga marine services
E mail: info/aliagamarine.com
PHN/fax: +90 232 618 03 90
Mobile: + 905556084850
aliagamarine.com
TURKEY

1999
Price  
    request
125847620 107

ATLANTIC HPT 150/3100 for sale
Hydr. pressbrake


pressure: 150 tchamfer lenght: 3100 mmdistance between columns: 2600 mmdayligth: 400 mmcolumn arm: 250 mmstroke: 200 mmtable width: 180 mmtable height: 915 mmoil volume: 225 ltr.ajustment speed: 100 mm/secworking feed: 1 ...
used machine
 
pressure: 150 t
chamfer lenght: 3100 mm
distance between columns: 2600 mm
dayligth: 400 mm
column arm: 250 mm
stroke: 200 mm
table width: 180 mm
table height: 915 mm
oil volume: 225 ltr.
ajustment speed: 100 mm/sec
working feed: 10 mm/sec
return speed: 100 mm/sec



This ad was created with MODUL MWS - the software solution of LogoTech.
1993
Price  
    request
10370762 106

ATLANTIC HPT 300/30 CNC for sale
Bending Presses


CNC hydraulic press brake, used year: 1995 model: HPT 300 / 30 maximum force maximum force: 300 t Max pressure / Max pressure: 310 bar CNC control / control: CNC ATL 500 bending length / working length: 3100 mm distance  ...
used machine
 
CNC hydraulic press brake, used year: 1995 model: HPT 300 / 30 maximum force maximum force: 300 t Max pressure / Max pressure: 310 bar CNC control / control: CNC ATL 500 bending length / working length: 3100 mm distance between stands / distance b/n columns: 2600 mm stroke / stroke: 250 mm stroke adjustment of depth gauge / vertical adjust-
ment of back stop: 250 mm distance between table and plunger / dist. b/n table and ram: 500 mm throat / throat: table width 330 mm / table width: 250 mm extra speed / speed down: 80 mm / s bending speed /.
speed down operation: 6 mm / s return speed /.
reject speed: 65 mm / s power connected load: 22,5 KW weight / machine weight: 15.4 t Accessories / Accessories: inventory of bending tools / number of bending tools crowning / bowing attachement

Specification / specification:
CNC ATL 500: Digital display of the depth gauge and work pressure
Positioning / programming of the trailing stop (x) and (y) depth gauge
Up to 8 bending programs can be saved
1995
Price  
  DE   request
125511536 109

HAAS SHRT160H for sale
Rotary table


Weight approx.: 70 kgDimensions (l x w x h) approx.: 450 x 260 x 160 mmDescription: Table top diameter 160 mm. With tailstock mod. HPTS5. Serial number 165314. See photo

 
Weight approx.: 70 kg
Dimensions (l x w x h) approx.: 450 x 260 x 160 mm
Description: Table top diameter 160 mm. With tailstock mod. HPTS5. Serial number 165314. See photo
 
used machinery auction RESALE 2,700 €  
  IT   request
125508830 108

ADOLFI HPT-300 for sale
Welding Positioner


Weight approx.: 200 kgDimensions (l x w x h) approx.: 700 x 1100 x 700 mmDescription: Table diam. 600 mm, capacity 1000 kg max., VFD speed control, 0-90° tiltable, Practically new, only used for 1 trade fair, Further de ...

 
Weight approx.: 200 kg
Dimensions (l x w x h) approx.: 700 x 1100 x 700 mm
Description: Table diam. 600 mm, capacity 1000 kg max., VFD speed control, 0-90° tiltable, Practically new, only used for 1 trade fair, Further details, see photos.
 
used machinery auction RESALE 1,670 €  
  IT   request
124155973 1101

MITSUBISHI 1130kva for sale
Diesel Generators


; Gross weight [kg]: 12000; Engine: Mitsubishi SI2HPTA; Accessories: Switching panel, Volt meter, Ampere meter, Hertz meter, Start battery, Exhaust system; Power type: 4000002
used machine
 
; Gross weight [kg]: 12000; Engine: Mitsubishi SI2HPTA; Accessories: Switching panel, Volt meter, Ampere meter, Hertz meter, Start battery, Exhaust system; Power type: 4000002
2010
93,250 €  
  NL   request
122963894 107

ATLANTIC HPT 060/20 for sale
Hydr. pressbrake


pressure: 60 tchamfer lenght: 2100 mmdistance between columns: 1600 mmdayligth: 280 mmstroke: 100 mmthroat: 200 mmoil volume: 160 ltr.ajustment speed: 70,0 mm/secworking feed: 8,0 mm/secreturn speed: 55,0 mm/sectotal pow ...
used machine
 
pressure: 60 t
chamfer lenght: 2100 mm
distance between columns: 1600 mm
dayligth: 280 mm
stroke: 100 mm
throat: 200 mm
oil volume: 160 ltr.
ajustment speed: 70,0 mm/sec
working feed: 8,0 mm/sec
return speed: 55,0 mm/sec
total power requirement: 5,6 kW
weight: 4.000 kg
range L-W-H: 2,28 x 1,2 x 2,24 mm



This ad was created with MODUL MWS - the software solution of LogoTech.
1995
Price  
    request
123549619 1402

#2812 for sale
Robostar RBC 02HPT10 R-linear guide


Model: RBC-R Engine: HC-K (M) 100 W FS13. Ratio: 20 Ford. 3000/min Lenght: 430 m; ready for operation

 
Model: RBC-R
Engine: HC-K (M) 100 W FS13.
Ratio: 20 Ford. 3000/min
Lenght: 430 m; ready for operation
 
680 €  
    request
65282141 107  

WEAN UNITED Contin. hot strip rolling mill (8 stands) for sale
profiling lines


This continuous hot strip rolling mill is ideal for high quality strip production starting from thick slabs. The hot strip mill takes the slabs from the reheat furnace and by reversing them through 3 roughing stands and ...

 
This continuous hot strip rolling mill is ideal for high quality strip production starting from thick slabs. The hot strip mill takes the slabs from the reheat furnace and by reversing them through 3 roughing stands and then through 5 finishing stands which reduces them to a thickness range from 1,5 to 10,5 mm. Material: carbon steel & stainless steel2 000 000 ton per year capacity = 166 666 ton per month capacityInput slab thickness range: 150 > 250 mmInput slab width range: 600 > 1560 mmInput slab length range: 4900 > 5500 mmOutput plate thickness range: 1,5 > 10,5 mmOutput plate width range: 600 > 1564 mmTotal roughing mill power: 12000 hpTotal finishing mill power: 23500 hpPrevious owner: Usinor FR (now Arcelor)Equipment was dismantled by Usinor. Cleaning & reconditionning by Danieli.Currently stored in the port of Antwerp & packaged ready for transportTotal net weight of equipment: 4337 ton – 5652 m3>> RoughersR1 - 4HI UNITED Roughing mill stand 33”/ 51” x 66” (no pinion stand, no gearbox and no motor)R2 - 4HI CLECIM Roughing mill stand 36”/ 53” x 66” with gearbox (1:6.32), 2x 4,000 Hp at 145 - 290 Rpm  DC motors with reactance (no pinion stand)R3 - 4HI UNITED Roughing mill stand 32”/ 53” x 66” with gearbox (1:9.71), 2x 4,000 Hp at 500 Rpm AC Synchronous motors with  reactance (no pinion stand) >> Finishing millsF1 - 4HI UNITED Finishing mill stand 25” / 49” x 66” with pinion stand and gearbox (1:5.61), 1x 4500 Hp at 200 - 355 Rpm DC motors with reactanceF2 - 4HI UNITED Finishing mill stand 25” / 49” x  66” with pinion stand and gearbox (1:3.17), 1x 5000 Hp at 171  - 345 Rpm DC motors with reactanceF3 - 4HI UNITED Finishing mill stand 25” / 49” x  66” with pinion stand and gearbox (1:1.90), 1x 5000 Hp at 155  - 310 Rpm DC motors with reactanceF4 - 4HI UNITED Finishing mill stand 25” / 49” x  66” with pinion stand - direct driven, 1x 5000 Hp at 108 - 230 Rpm DC motors with reactanceF5 - 4HI UNITED Finishing mill stand 25” / 49” x  66” with pinion stand - direct driven, 1x 4000 Hp at 135 - 270 Rpm DC motors with reactance>> Roll grinders (optional)28” CINCINNATI Roll grinding machine- max dia of rolls: 710 mm- max distance between peaks: 4270 mm- rotational motion of wheel: 25/30 hp – 600/800 rpm- head: 7,5 hp – 400/1600 rpm44” FARREL Roll grinding machine - max dia of rolls: 1549 mm- max distance between peaks: 5500 mm- forward motion of the grinding wheel: 2 hp – 1150 rpm- rotational motion of wheel: 40 hp – 1450/575 rpm- head: 15 hp – 300/1200 rpm- transmission: 3/5 hp – 300/800 rpmApproximalty 20 rollers between the roughers
 
Price  
  BE   request
65281443 106  

EUROMAC PB 350S 35 ton for sale
horizontal presses


4 HPTable: 1250 x 600 mmBending: 150 x 30 mmCutting: 150 x 15 mmPunching: 30 mm

 
4 HPTable: 1250 x 600 mmBending: 150 x 30 mmCutting: 150 x 15 mmPunching: 30 mm
 
Price  
  BE   request
 page 1 
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Find used machinery dealers in your country