heidelberg gt used for sale

For sale; Goodway double spindle CNC lathe type GTS-200MMX equipped with a Fanuc 0i-TF control with manual guide i dialog part! This CNC lathe is equipped with 2 turrets. The left 12-position turret has no driven tool positions, the right 12-position turret has driven tool positions. The left spindle has a rod passage of 51 mm and is equipped with a 185E collet device. The right spindle is equipped with a Ø 210 mm chuck! The main engine power is 11/15 kW. The maximum turning diameter is Ø 280 mm. The movement X1, X2 is 190/220 mm. The movement Z1, Z2 is 270/740 mm. The machine is equipped with a chip conveyor with right-hand ejection and an LNS bar magazine type Servo III. Can still be visited under electricity, subject to prior sale.

Hydraulic shear BOMBLED GTS II 3012 Capacity: 3050 x 12 mm Maxi travel: 210 mm Back gear gauge travel: 1000 mm - Back gear gauge ELGO Year of construction: 1993 Throat depth: 110 mm Motor: 13 kW Voltage: 380 V Length: 3700 mm Depth with support: 2500 mm / without support: 2000 mm Total height: 1900 mm Weight: 9,5 T

CNC lathe Graziano GT 300 Y Gital Gildemeister CNC Fanuc 16i - T ASA 5 Main spindle power 15 Kw Self-centering diameter 175 mm ASA 5 spindle connection Bar passage 52 mm Turning diameter 230 mm Turning length 500 mm Number of revolutions 5000 Number Tool holder turrets1 Number of tool places first turret 12 Number of motorized first turret 12 First turret tool attachment typeVDI 30 X Axis Travel 160 mm Y Axis travel + - 32 mm Z Axis travel 550 mm Linear axis rapid feeds X Y Z30 m/min Counter spindle yes ASA 5 spindle nose Number of counter spindle revolutions 5000 Power sub spindle 9 Kw Spindle Hole 30 mm Model and brand of bar loader LNS single bar tube Belt chip conveyor Presetting yes 2000 The machine can be seen under power in our warehouse in Gussago BS. Mimu machine tools

max. plate width: 52 cm stamp width: 220 mm serial no.: 16548 plate punch for GTO or QM 46 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Proseal GT2, Automatic high-speed inline traysealer., - Equiped with E-seal (servo sealing), - 6 tray tool, 184 x 115mm (common tool), - Excellent working condition, - Pass through conveyor belt.

Used Automatic Tray Erector ETT Make ETT Type GTF 8 Year of construction 2000 Capacity up to 10 trays min depending on tray size Tray size Length 600 800 x Width 400 600 x Height 110 140 mm Tray according to Fefco 0453 Connection 230 400 V Energy 6 5 kW Air need 15NL Air pressure 6 bar Siemens S7 control Used as is without guaranty [...for more information send your inquiry to the seller.] refno: AT52

Silex Grill Type GTT-10.20 3 kW tested

x-travel: 31000 mm y-travel: 4310 mm z-travel: 1500 mm column daylight: 4000 mm Main spindle:: turning speed range - main spindle: 16000 U/min power capacity - main spindel: 34 / 44 kW tool taper: HSK A63 c-axis: +/- 360 ° A-Axis: +/- 110 ° Distance table surface - crossbeam bottom: 2570 mm work table:: table surface area: 30000 x 3000 mm max. workpiece weight: 16 t Tool-Presetter:: number of toolpositions: 120 pos. tool taper: HSK A63 rapid traverse ( X / Y / Z ): 20 / 20 / 16 m/min control: Heidenhain iTNC 530 total power requirement: - kVA weight of the machine ca.: 100 t dimensions of the machine ca.: 32 x 7,3 x 6,5 m unused 5 Axis Gantry Machining Center with moving Portal. The direct driving method using a torque motor eliminates precision problems caused by wear over time and by installing encoders on the torque motor side of the A and C axes, the actual turning angle can be  ...

Key data: 700 mm, 2000 mm, 1600 1/min

Machine Details Stock number 1105-03980 Machine Type: CNC Lathe Make GEMINIS Type GHT 4 G2 X 700 X 2000 Year of construction 2006 CNC control type Control FAGOR TC 8055 Storage location FRANCE Country of origin Delivery time immediately Freight base from location Price Technical details Turning diameter 720 mm Turning length 2000 mm Control FAGOR TC 8055 Spindle diameter 104 mm Turning diameter over carriage 470 Speed 0 - 1600 m/min Voltage 400 V Machine weight approx. 7 t Information CNC FAGOR 8055 TC

General SKU295P584 LocationBarneveld MakeGerald Kainz Verfahrenstechnik GmbH (DE) TypeGTS-2000 No.18/027 Year of construction2018 Main Features MaterialMild steel Surface2.6 m2 Sizes diameter1880 mm Specified Features - Tumbler screener Vibro sieveTumbler screening machine Sieve surface2.6 m2 Number of sieve decks:1 Sieve sizesdia.1880mm With covercheck Inletdia.300mm Outletdia.200mm Drive excentercheck Motor4,0 KW, 400/690 Volt Sieve perforation(no sieve) Tumbler screening machines MaterialMild steel Information Mounted on mild steel framecheck Floor space2,0x2,0 M Total height1,8 M Weight1150 KG Extra SpecificationsThis sieve is unusedTumbler screening machinesKainzSieves > Tumbler screening machinesBrand > Kainz What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination ...

We hereby offer this used Doosan Puma GT2100 CNC lathe from 2021, located in Slovakia. With a generous 562 mm turning length, Fanuc i control unit, 4500 RPM spindle speed, and a robust 18.5 kW motor, this machine offers precision and power for your turning needs. Technical specifications: Year: 2021 Made in: South Korea Working hours: 630 hours Control unit: Fanuc i X-Axis travel: 230 mm Z-Axis travel: 580 mm Rapid traverse X-axis: 24 m/min Rapid traverse Z-axis: 30 m/min Max turning diameter: 390 mm Max turning length: 562 mm Through hole diameter: 66 mm Chuck size: 203 mm Spindle speed: 4500 rpm Motor power: 18.5 kW Turret stations: 12 slots Dimensions: Length: 2940 mm Width: 1628 mm Height: 1700 mm Weight: 3700 kg

bar capacity: 42 mm Max. Turning length: 100 mm control: MITSUBUSHI M70 turning speed range - spindle: 100 - 4.000 U/min Number of axles: 4 St. CNC lathe | müga - GTA4-42S equipped with chip conveyor. The machine is in very good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: GTA 4 | GTA4 42S | GTA-4 | GTA 4 42 S The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Hydraulic operating pressure: 300 bar Voltage: 380 V, 50 Hz 3 phases 3 KVA Hydraulic oil: Mobil D.T.E 26 Oil: 76 liters Approx. Onsite Dimension. (l x w x h): 2,100 x 650 x 2,350 mm, weight approx.: 1,900 kg

Description: Spindle stroke 80 mm Projection ,178 mm Foot plate 456 x 270 mm Table size 300 x 300 mm Mounting MK 2 Spindle speeds 180 - 2270 rpm Serial number ,3562406060183 Approx. Onsite Dimension. (l x w x h): 650 x 400 x 1,100 mm, weight approx.: 150 kg

Description: Raising and lowering does not work. Presumably a defect in the hydraulics, as the control works. Untested / defects cannot be excluded Approx. Onsite Dimension. (l x w x h): 1.200 x 1.200 x 2.500 mm, weight approx.: 1.000 kg

Description: 10 mm cutting capacity Cutting length 3050 mm Rear stop capacity 1000 mm Main motor power kW 15 Stroke speed/min 4 - 10 Angle stop, length 1000 mm. Delem DA 310 digital control weight approx.: 10,000 kg, Approx. Onsite Dimension. (l x w x h): 3,700 x 1,800 x 2,000 mm

Printing plate bending for Heidelberg SM 52 Beil PB-S 52; good condition; cleaned and tested; Stand-up device; suitable for printing plates Heidelberg SM 52. Plate bender for Heidelberg SM 52 Beil PB-S 52; good condition; clened and checked; used for Heidelberg SM 52 plates.

Pressure plate stacker Grafoteam PST 26 C; arm length 650mm; suitable for Heidelberg Suprasetter A52-74; optionally with stop interface for Heidelberg Suprasetter A52-74. Plate stacker Grafoteam PST 26 C; arm lenght 650mm; used for Heidelberg Suprasetter A52-74; for option with stop-interface for Heidelberg Suprasetter A52-74.

plate punches 1. Beil 780-S-St - 3-hole 780/425 - table 1000-1400 2. Bacher 2005 - 2-hole 425 - table 730-1000 3. Bacher 2045 - 2-hole 425 - table 730-1000 4. Beil 425-T-H - 2-hole 425 - table 520-770 5. Stanze 2-hole 425 - table 420-660 - metal frame - SOLD 6. Billows 2-hole 225 - table 650-950 7. Bacher 2032 2-hole 220 - table 300-400 (4) - 1x SOLD 8. Heidelberg SM52 - 425 plate punch 9. Heidelberg SM52 - plate bender - SOLD

Plate bend Ingkant SM 52; cleaned and tested; Table equipment; suitable for Heidelberg SM 52 plates. Plate bender SM 52; good condition; cleaned and checked; table top model; used for Heidelberg SM 52 plates.

Transit Ultrasonic Banderolier ATS US 2000 AB TR; good condition; maintained and checked by ATS Customer Service in Heidelberg; Frame 360x260mm; Bandwidth 15mm. Transit ultra sonic banding machine ATS US 2000 AB TR; good condition; cleaned and checked by the support of ATS Heidelberg; frame 360x260mm; band width 15mm.

Busch/Heidelberg combined claw pressure/vacuum pump ME 2048 BH complete with 4.5 KW AC-motor, - 0.6 bar/ + 1.0 bar, completely overhauled with all wearing parts, Heidelberg version, 1 year warranty

Rotary vane pressure/vacuum pump from Gardner Denver/Rietschle KTA 80/5 complete with 4.0 KW AC-motor, 50 m3/h, + 1.0 bar pressure, - 0.6 bar vacuum, Heidelberg version with Heidelberg plug, completely overhauled with all wearing parts, 1 year warranty

Printing plate punch/lacquer plate punch for Heidelberg XL 145/162; good condition; cleaned and tested, perforation 1200mm autoplate. Plate punch/ plate punch for varnish plates for Heidelberg XL145/162; good condition; cleaned and checked; hole size 1200mm autoplate.

Complete printshop from one place in germany: Manufacturer: Ryobi 5 colors Model: 755 (S-5-A) Year: 03-2006 Equipment: aut. Print provision, pallet feeder, oscillating FA IVS equipment, Spectro Pro densitometer serial no. B201004, plate punch Beil, Connection for Foellmer counting tape inserter OK-90 Possibly. Number of prints: 38 million Availability: spring 2021 Price expectations: Defects: none, regular maintenance Manufacturer: Horizon Model: VAC-100A, SPF-200A HMU-100, ST-40, FC-200A, SC-200 Year: 04/2008 Equipment: Small format equipment MS-100, additional blower f. VAC-100, stacking lowering table, manual system HMU-100 Availability: spring 2021 Defects: none Manufacturer: Polar 92 Model: XT Year: 02-2007 Availability: spring 2021 Defects: none, regular maintenance Manufacturer: Horizon folding machine Model: AFC-504AKT Year: bought used 04 - 2009  ...

CTP-Mitsubishi - DPX 460 – Plate platesetter with Rip-Mate PC Year of construction: ca. 2007 incl. software and accessories incl. originally packaged role films For the production of ready-to-print stamped polyester printing plates Mitsubishi SILVER DIGIPLATE Suitable for the following presses: For Heidelberg QM 46, GTO 46, GTO 52 For Ryobi 5xx For Roland Edelmann Practica 400x510mm For Heidelberg Speedmaster SM 52 – PM 52 2x stock rolls 1x integrated register punch for PM52 autoplate

Complete Printshop from one place in germany: Manufacturer: Heidelberg Model: GTO Year of construction: 87 Size: 32 x 46 cm Totalizator status: approx. 29,450,894 Availability: in July 2021 Manual double sheet control AntiqueStatic Simco Powder device WEKO Chromed plate cylinder 2 display trolleys Sticks of paper Rubber blankets 2 clamping bars Page marks + upright + left for small formats Support plate Bacher Controll- 1 Bacher register punch with assembly and fitting strips Plus version complete numbering and imprinting device incl. 3 numbering machines + accessories Perforation device: 2 perforation and creasing insert blocks Bracket with three leaf springs Dampening system Varn Kompac III GT 46 Year: December 9, 1994 POLAR CUTTING MACHINE High-performance high-speed cutter Manufacturer: PolarMohr Model: 76 EM Year: 1993 Availabile: end of July 20 ...

Size: 520 x 740 mm Equipments: as is Easy installation and removal suitable for Heidelberg, Komori, KBA, Manroland, Ryobi, Sakurai

Description Plate die-cutter suitable for MAN Roland 300-500-700-900 with autoplate system APL and Graphometronic Film register for plates from CtP systems but also for presses from Heidelberg 52, 74, 102 and XL series and KBA Rapida presses 74, 75, 105, 130, perforations 780 and 425 mm can be switched off each

connection value: 380/400 Volt connection frequency: 50 Hz weight: ca. 1.200 kg Heidelberg platen OHT with PRACMATIC conversion for imprinting in roll labels (roll to roll) - from roll to roll - Hot air drying The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Autobond Mini 105 TPHES - thermal laminator year 2008 2 sided Max. sheet size: 106 x 106 cm (41.73" x 41.73") min. sheet size: 28.5 cm x 32 cm (11.5" x 12.5") Max. speed: 60 m/min (200 ft/min) 115 gsm to 650 gsm Heidelberg Speedmaster feed head Good Condition

max. plate width: 80 cm stamp width: 425 mm serial no.: 1132 Plate punch for Heidelberg S-Offset The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 80 cm stamp width: 425 mm serial no.: 5136 Plate punch for Heidelberg S-Offset The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dry Pollinator Mediprint Powder pollinators for sheetfed offset suitable for Heidelberg SM 52 with original protection for delivery as good as new Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Year of construction 2008 Pumping and control station Previously used on Heidelberg machines Delivery date: immediately from stock Price on request. We deliver and install worldwide!

CTF Filmbelichter - CTF Computer to Film Heidelberg QUICKPLATER Year 1992 - Serial-No. 40509/17 CTF Imagesetter AGFA AccuSet 800 Plus Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Imagesetter KODAK MAGNUS Q800 Platesetter F-Speed with XPO Baujahr 2015 / Year 2015 Total Counting 57.000 Plates - 2.200 working hours Laser head 2.5 Resolution 2400 dpi Factory Upgrade – SCU Option Factory Upgrade – Additional Single-Cassette and Trolley Extra Casette with transport trolley for SCU Factory Upgrade – Single Punch Hole for Integrated Punch Option Inline Plate Punching with Bacher-Heidelberg System Grafoteam PST 480-B Compact Plate stacker up to 100 plates (0,3mm) Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect

Buchdruck Schrank - Letters Cabinet Bayer For Leter Press Heidelberg OHT - Cylinder Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Description: with new compressor incl. 2 years manufacture warranty Delivery rate of 250 l/min Operating hours 3.221 b/h Scroll Star version for Heidelberg presses with refrigeration dryer and 2x 16 liter tanks Special connection plug for printing machines can be changed without problems to a connection cable with 16 A plug. The following work was done: Defective compressor element was replaced On the refrigeration dryer, the fan motor and pressure switch were replaced. main motor: 4 kW, serial number: AII 861609, screw or piston: 10 bar, Approx. Onsite Dimension. (l x w x h): 600 x 600 x 1,150 mm, weight approx.: 210 kg

New unused compressor Heidelberg ScrollStar, Built in 2018. Technical data according to the type plates shown.

Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4 WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin.

Ultrasonic cleaner GT85 GT 2000-3P built in 2008. The washing tub is made of 316L stainless steel, the other tubs are made of 304 stainless steel and the supporting structure is made of structural steel. The volume of washed products should not exceed (LxWxH) 2400 x 600 x 600 mm Industrial washer - technical data: - external dimensions (LxWxH): 6400 x 4400 x 2800 mm - usable dimensions: chamber I (washing and phosphatizing): 2800 x 800 x 900 mm - useful dimensions: chamber II (rinsing): 2800 x 800 x 900 mm - usable dimensions: chamber III (drying): 2800 x 800 x 900 mm - power consumption: 63 kW - total weight: 2500 kg Bathtub 1: - preparation type: Ruster P02, Roklin P11 - pH: 2-4 - bath operating temperature: 20-60 degrees C - total bath capacity: 2000 l - maximum product weight: 500 kg - maximum product volume: 250 dm3 Bathtub 2: - type of preparation: tap water  ...

Biomass Plant, 5 MWel, 50 Hz, yoc 2002, in operation Boiler • Technical data: - Fuel tank capacity: approx. 1 .300 m 3 - Exhaust gas volume 29,000 Nm3/h - Average combustion temperature of 900°C (850 for 2 s.) - Thermal power of the furnace 13 MW - 2 add. Burners 5 MW each - Average calorific value Hu 12,500 kJ/kg - Throughput capacity 3,991 kg/h - Boiler working pressure 41 bar - Superheated steam temperature 420°C - designed amount of steam 14 t/h - Fuels: RDF, wood chips, straw, remains of chipboard, choiceed waste Hours of operation of the entire plant appr. 120,000 hours Steam turbine - TWIN steam turbine KKK, type: CFR 3 / AFA 6 GTA - Generator AvK, type DIG 140 k/4W - Gearbox Renk, type: ELCO W-shape can be inspected in operation this week, - SGS can be ordered for inspection.

Omam second hand line width 2000 mm for PP corrugated sheet extrusion Plastic • Omam extruder diameter 150 mm / 30 D • Main Extruder motor: Siemens DC motor 410 kW • 2-ways continuous filter change FCF 120-2V complete with hydraulic power unit • Melt pump Alfatech AT80 with motor and control panel • Omipa T-Die 2180 mm wide with thickness 5mm and pitch 5,9 mm • Nr.02 T-Dies 3mm thick / 4mm pitch • Caliber with anodized aluminum plates, complete with 5,5 Kw air blades and 3 vacuum pumps 1,1 Kw (x1), 2,2 Kw (x2) • Take-off roller – equipped with 8 rolls, 330 mm diameter, rubber coated, 5 Kw motor • Oven: 2500 mm wide, power 48 kw, infrared, with control unit • Ferrarini & Benelli Corona treatment complete with GTS8 15Khz generator and 2 fans for ozone extraction (0,25hp) • Cooling unit with 6 fans • Take off rollers - 4 rolls, 330mm diameter, rubber coated, 5 Kw ...

MAK 8M552AK Crankshaft for Sale MARKING 1.74 .6 -25.10.01-50B 101373 221361 CK 45/50 DB 7295 DB LLOYDS DSF 601 966 15.10.76 7295 LLOYDS 62300 D 10 GTL .76 7295 A B ES 73826 10.76