internal diameter: 80 - 900 mmgrinding depth: 500 mmswing diameter: 1.000 mmControl: SIEMENS Sinumerik 802 solution linemax. external grinding diameter Ø: 900 mmworkpiece weight: 1.000 kgfinishing spindle: : spindle taper: 60 mmpower capacity: 15 kWturning speed range - grinding wheel: 1.500 - 3.500 1/mintotal power requirement: 15 kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: 4,7 x 2,9 x 2,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. workpiece diameter: 1000 mmmin. workpiece diameter-at internal hobbing: 100-500 mmworkpiece length - max.: 500 mmcontrol: Siemens Sinumerik 840 D swing dia.: 1250 mmWorkpiece spindle flange diameter: 520 mmwork piece spindle speed range: 0-440 U/minweight of the machine ca.: 25 tdimensions of the machine ca.: 5100 x 3034 x 4500 mmTable travel: - Z1/Z2 axis 1000 mm, - X1/X2 axis approx. 1300 mmTable speed continuously adjustable: - Z axis 0–30 m/min, - X axis 0–50 m/min - Feed speed continuously adjustable 0.01–15 mm/min - Feed dependent on stroke 0.0005–0.1 mm - Workpiece spindle positioning C axisEquipment/accessories: - Grinding spindle - Kaiser dresser - Tool measuring probe - Filter system - With flushing nozzle connections - 2 Capto holders - 1 set of jaws for chuck - technical documentationThe data fo ...
内径：150 mm磨削深度：200 mm工作台行程：425 mm孔径：80 mm主轴转速：：17000 U/min工件车削速度：125/176/246/350 U/minmax。摆动直径：250 / 420 mm总功率要求：2,2 / 0,5 / 0,9 kW机器重量约：2 t机器尺寸约：2,40 x 1,20 x 1,45 m此广告的数据是使用 ModulMWS 创建的 - LogoTech oHG 的软件解决方案
spindle turning speed range: 170 - 18000 U/minweight of the machine ca.: 7,5 tdimensions of the machine ca.: 5,00 x 4,00 x 2,20 m--> Control conversion (2014) to Siemens Sinumerik 840D Solutionline--> Technical data Grinding diameter: 20 - 300 mm--> Oscillation diameter: 350 (500) mm--> Workpiece length: 300 (1300) mm--> Recommended grinding depth up to: 300 mm--> Grinding table stroke Z-axis (total): 650 (950) mm--> Resolution: 0.001 mm--> Rapid traverse: 12 m/min-1--> Grinding stroke speed: 0 - 9.99 m/min-1--> Feed rate: 0 - 99.99 m/min-1--> Step feed value during reversal: 0 - 0.999 mm--> Grinding table stroke X-axis (total): 150 mm--> Resolution: 0.001 mm / Ø--> Rapid traverse: 5 m/min-1/R--> Grinding stroke speed: 0 - 5 m/min-1/R--> Feed rate: 0 - 99.99 m/min-1/R--> Step feed value during reversal: 0 - 0.999 mm / Ø--> Swivel capability of the workpiece headstock:--> B-axis: -32° ...
internal diameter: max. 600 mmgrinding depth: max. 800 mmgrinding length: max. 600 mmcontrol: Siemens 840 D grinding diameter - internal: max. 600 mmgrinding diameter - cylindrical: max. 800 mmworkpiece length - max.: 380 mmexternal grinding length max.: 600 mmtravel - x1 axis: 150 mmtravel - z1 axis: 1100 mmtravel - x2 axis: 470 mmtravel - z2 axis: 800 mmworkpiece spindle: 8,5 kWturning speed range - stepless: 1-795 U/minEquipment / Accessories: Workpiece spindle unit (U/B1/L adjustment): - Travel (U-axis): 300 mm - Swivel angle (B1 axis): -0,5°/+12° - Drive power of the workpiece spindle: 8.5 kW - Speed range (infinitely variable): 1-795 rpm - Set-up speed (jogging): 10 rpm - Spindle head size A 8 according to DIN 55026 - Through-hole 58.5 mm - Workpiece diameter max. 830 mm - Workpiece length (overhung clamping) max. 800 mm - Workpiece length (clamped between centers) max. 800 mm - ...
internal diameter: 20... 400 mmgrinding depth: 315 mminternal grinding spindle rev.-stepless: 2640...16500 U/minwork piece spindle speed: 40400 U/mintable speeds: 0,18 m/minrapid traverse: 10 m/mintable travel: 630 mmtotal power requirement: 16 kWweight of the machine ca.: 5,8 tdimensions of the machine ca.: mgrinding diameter: innen / internal 20..400 mm / external 500 mmmax. diameter of work piece: 500 mmmax. grinding length: 315 mmcone grinding: 60 °power drive of internal grinding motor: 7,5 kWrev’s of internal grinding spindle: 2640...16500 U/minpower drive of face grinding attachment: 4 kWpower drive of workpiece motor: 1,5 kWrev’s of work piece spindle: 40...400 U/minsteplessly variable table traverse speeds: 0,1...8 m / minrapid movement of table: 10 m / minstroke table 630 mmmax. distance between work piece spindle flange and grinding spindle: 1250 mmThe data for this ad w ...
