已验证经销商
查看详情
1 / 2
技术参数
· ID 170394630龙门铣床
- 状况
- 二手
- 出厂年份
- 2013
- 所在地
- 德国
Identifikation
制造商Parpas
型号Diamond linear
Technik
数量1
技术参数 12200mm
技术参数 21500mm
技术参数 31000mm
描述
Description, subject to prior sale.
CNC 5-axis gantry milling machine with high dynamics
Manufacturer: Parpas
Type: Diamond linear
Year of manufacture: 2013, Acceptance: 2014
Control: Heidenhain iTNC530
X (longitudinal travel): 2200 mm (+330)
Y (transverse travel): 1500 mm (+330)
Z (vertical travel): 1000 mm
Distance between uprights: 2700 mm
Max. distance between table surface and spindle tip
with mounted milling head 1220 mm
Linear axis feed speed:
X and Y axis 0-60 m/min
Z-axis 0-40 m/min
Table surface: 2300 x 1600 mm
Max. weight with optimal distribution: 6000 Kg/m2
T-slots 22 mm, distance between T-slots 200 mm.
5-axis orthogonal milling head with electrospindle
Max. spindle speed 20,000 min-1
Spindle cone HSK 63 A
A-axis ±105° (torque 830 Nm),
C-axis ± 370° (torque 1200 Nm)
42 Stations Tool Changer
Tool holder HSK 63A-100
Max. tool∅ 80mm
Max. tool length 350 mm
Max. tool weight 8 kg
Tool coolant supply through the spindle with
Paper filter device, 20 bar 25 L/min.
Compressed air and water through the spindle center
M&H Infrared Probes
Blum Laser Measuring System
Rinsing gun
Portable Handwheel HR520 Heidenhain
Complete 3D machining, simultaneous or permanent
Finishing
2 chip conveyors
Control cabinet with air conditioning
Machine does not need a foundation.
Thermal insulation and stabilization
Sunroof for loading and unloading.
All linear axes X, Y, Z are controlled by means of cooled
Digital motors moves.
The linear axes X, Y, Z are equipped with coded glass scales
from Heidenhain. On the C-axis is a
Angle measuring system from Heidenhain.
Machine can be viewed working under power.
Further information, videos and photos on request.
If you are interested in the zero-point clamping system, this can be done with
. Automation NPS 2000 x 1400 with 50
mm raster. What is meant by this ? NPS is the
Zero-point clamping system. The grid shows length x width.
Divided into 50 mm spacing. This means that all 50
mm there is the possibility of a workpiece in the grid
of the zero-point clamping system. A 50 mm
Grid is already very good. Often the grids of a
Zero-point clamping system coarser. The finer, the lighter the
to place the holder on a workpiece. And it
can thus also pick up smaller workpieces
. E.g. Many parts on the milling table, which
can be processed "simultaneously".
Technical data, errors excepted.
CNC 5-axis gantry milling machine with high dynamics
Manufacturer: Parpas
Type: Diamond linear
Year of manufacture: 2013, Acceptance: 2014
Control: Heidenhain iTNC530
X (longitudinal travel): 2200 mm (+330)
Y (transverse travel): 1500 mm (+330)
Z (vertical travel): 1000 mm
Distance between uprights: 2700 mm
Max. distance between table surface and spindle tip
with mounted milling head 1220 mm
Linear axis feed speed:
X and Y axis 0-60 m/min
Z-axis 0-40 m/min
Table surface: 2300 x 1600 mm
Max. weight with optimal distribution: 6000 Kg/m2
T-slots 22 mm, distance between T-slots 200 mm.
5-axis orthogonal milling head with electrospindle
Max. spindle speed 20,000 min-1
Spindle cone HSK 63 A
A-axis ±105° (torque 830 Nm),
C-axis ± 370° (torque 1200 Nm)
42 Stations Tool Changer
Tool holder HSK 63A-100
Max. tool∅ 80mm
Max. tool length 350 mm
Max. tool weight 8 kg
Tool coolant supply through the spindle with
Paper filter device, 20 bar 25 L/min.
Compressed air and water through the spindle center
M&H Infrared Probes
Blum Laser Measuring System
Rinsing gun
Portable Handwheel HR520 Heidenhain
Complete 3D machining, simultaneous or permanent
Finishing
2 chip conveyors
Control cabinet with air conditioning
Machine does not need a foundation.
Thermal insulation and stabilization
Sunroof for loading and unloading.
All linear axes X, Y, Z are controlled by means of cooled
Digital motors moves.
The linear axes X, Y, Z are equipped with coded glass scales
from Heidenhain. On the C-axis is a
Angle measuring system from Heidenhain.
Machine can be viewed working under power.
Further information, videos and photos on request.
If you are interested in the zero-point clamping system, this can be done with
. Automation NPS 2000 x 1400 with 50
mm raster. What is meant by this ? NPS is the
Zero-point clamping system. The grid shows length x width.
Divided into 50 mm spacing. This means that all 50
mm there is the possibility of a workpiece in the grid
of the zero-point clamping system. A 50 mm
Grid is already very good. Often the grids of a
Zero-point clamping system coarser. The finer, the lighter the
to place the holder on a workpiece. And it
can thus also pick up smaller workpieces
. E.g. Many parts on the milling table, which
can be processed "simultaneously".
Technical data, errors excepted.
询问此设备
您的询问将直接发送给此设备的卖家。
