已验证经销商
查看详情
GLEASON - PFAUTER G 320
磨齿机
DONAU-KNAPP UZFM - V 300 H 齿条铣床 齿条铣齿机
二手已验证卖家
询问价格
直接联系卖家
1 / 3
技术参数
· ID 167384475齿条铣床 齿条铣齿机
- 状况
- 二手
- 出厂年份
- 1980
- 所在地
- Metzingen
Identifikation
制造商DONAU-KNAPP
型号UZFM - V 300 H
物品编号1049-757386
Technik
数量1
描述
hobbing length: 1750 mm
milling width: 260 mm
max. module: 10
min. module: 12
total power requirement: 8 kW
weight of the machine ca.: 4500 kg
dimensions of the machine ca.: m
D O N A U - K N A P P (Germany)
Universal Automatic Rack Milling Machine
Model UZFM – V 300 H
Year approx. 1980 Serial No. 80-234x
Max. length of rack 1,750 mm
Milling travel / milling width cross max. 260 mm
Module, steel / cast iron 10 / 12
Table clamping size 275 x 1,850 mm
Mounting height below cutter, depending on cutter Ø 136 – 410 mm
Cutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 160 mm
Cutter width max. floating / with support 50 / 140 mm
Cutter mandrel Ø max. 50 mm
Milling spindle head, swivelling right / left 30 / 45 °
9 spindle speeds 22 – 179 rpm
Milling slide swivelling right / left 30 °
Feeds, infinitely variable (milling slide) 0 – 600 mm/min
Quick return 2,000 mm/min
Milling spindle drive approx. 4 kW
Total electrical load 8 kW - 400 V - 50 Hz
Weight 4,500 kg
Accessories / Special Features:
* Automatic milling cycle control via cam bloc mounted on milling slide
and table slide with possibility of jump switching (= automatic by-pass
of an area which should not be milled) and pendulum milling operation
(= synchronized milling on the first half of table, and workpiece change
on the second half.
* hydraulic workpiece clamping device: 1.800 x 260 mm each, clamping width
140 mm, clamping height inside the device 60 mm, with own hydraulic
aggregate, hand switch,
* Manual fine adjustment of table (0.001 mm) for exact positioning in a
pre-milled rackgear.
* Various change gears (approx. 10 pieces). * 2 cutter mandrels. * Various other accessories.
* Central lubrication. * Built-in hydraulic unit.
* Simple Coolant device. Separate switch cabinet, various rack cutter up
to 160 dia.
This machine is especially suitable for milling racks, and also for
manufacturing broaching tools (relief milling is possible by swivelling the
cutter head).
Condition : Very good. Machine can be inspected under power.
Delivery : Ex stock, as inspected
Payment : Net, after conclusion of contract
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
milling width: 260 mm
max. module: 10
min. module: 12
total power requirement: 8 kW
weight of the machine ca.: 4500 kg
dimensions of the machine ca.: m
D O N A U - K N A P P (Germany)
Universal Automatic Rack Milling Machine
Model UZFM – V 300 H
Year approx. 1980 Serial No. 80-234x
Max. length of rack 1,750 mm
Milling travel / milling width cross max. 260 mm
Module, steel / cast iron 10 / 12
Table clamping size 275 x 1,850 mm
Mounting height below cutter, depending on cutter Ø 136 – 410 mm
Cutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 160 mm
Cutter width max. floating / with support 50 / 140 mm
Cutter mandrel Ø max. 50 mm
Milling spindle head, swivelling right / left 30 / 45 °
9 spindle speeds 22 – 179 rpm
Milling slide swivelling right / left 30 °
Feeds, infinitely variable (milling slide) 0 – 600 mm/min
Quick return 2,000 mm/min
Milling spindle drive approx. 4 kW
Total electrical load 8 kW - 400 V - 50 Hz
Weight 4,500 kg
Accessories / Special Features:
* Automatic milling cycle control via cam bloc mounted on milling slide
and table slide with possibility of jump switching (= automatic by-pass
of an area which should not be milled) and pendulum milling operation
(= synchronized milling on the first half of table, and workpiece change
on the second half.
* hydraulic workpiece clamping device: 1.800 x 260 mm each, clamping width
140 mm, clamping height inside the device 60 mm, with own hydraulic
aggregate, hand switch,
* Manual fine adjustment of table (0.001 mm) for exact positioning in a
pre-milled rackgear.
* Various change gears (approx. 10 pieces). * 2 cutter mandrels. * Various other accessories.
* Central lubrication. * Built-in hydraulic unit.
* Simple Coolant device. Separate switch cabinet, various rack cutter up
to 160 dia.
This machine is especially suitable for milling racks, and also for
manufacturing broaching tools (relief milling is possible by swivelling the
cutter head).
Condition : Very good. Machine can be inspected under power.
Delivery : Ex stock, as inspected
Payment : Net, after conclusion of contract
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
询问此设备
您的询问将直接发送给此设备的卖家。
