used HAFFNER KF

-Mobile with 2 wheels on the back.

Lock box mortiser unit: yes;

Lock inlet machine Haffner SL 100 with pneymatic clamps L x W x H: 1000 x 700 x 2000 mm Built in 1989 Weight approx. 220 kg The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4952 Eriswil/EN-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Manufacturer: Haffner, Type: DGS 202E 6000, Program control: yes, Pneumatical clamping system: yes, Saw blade tiltable up to °: 45-90, Schnittlänge min-max mm: 400-6000, Power saw engine kW: 2,2, Width adjustment by engine: yes, Saw blade diameter max mm: ca.500, rotations controlled: 2850,

Manufacturer: Haffner , Type: SL 100, Year: ca.1980, Work piece width min-max mm: 550-1050, Face plate aggregate: yes, Key hole boring aggregate: yes, Clamping hight max. mm: 1050, Trench deepth max mm: 150, Trench lenght max mm: 315, Vertikal spindles: 1, Horizontal spindles: 1, Milling chain motor Kw: ca.1,0, Milling widths stop system: 315, Total power kW: 1,5, Lifting device: Pneumatisch, Year :ca.1980

Manufacturer: Haffner, Type: DGS 124, Bauyeshr : 1994, Pneumatical clamping system: yes, Sägeblätter schwenkbar bis ° : 45-90-45, Schnitthöhe max mm : ca.150, Schnittlänge max mm : 200, Schnittlänge max mm : 200, Power saw engine kW: 2,9, Width adjustment by engine: yes, Saw blade diameter max mm: 500, rotations controlled: 2800, Year :1994

Double end profiler, edge processing machine, scoring motor, hogger motor, electric motor, spindle motor, milling motor -Manufacturer: Haffner, milling motor type M 30 -Power: 300W 17000 rpm -Voltage: 200V 300Hz -Dimensions: 240/70/90 mm -Weight: 2.5 kg

Panel saw, panel dividing saw, vertical panel circular saw machine, vertical panel saw -Handover: in the current condition as seen -Condition: the saw frame is welded, see pictures -Manufacturer: Haffner -Horizontal cutting length: 4400 mm -Vertical cutting length: 2100 mm -Diameter saw blade: 250 mm -Motor power: 2.2 kW -Transport height: 2550 mm -Space requirement: L5300/W1350/H3000 mm -Transport dimensions: 5300/1350/H2600 mm -Weight: 692 kg

Lock Box Milling Machine Chain Clamp Chain Milling Machine Door Lock Milling Machine HAFFNER Type: SL100 3 Aggregates Chain stemmer. Stülpfräe Handle / door lock cutter rollable The machine originates from the age-related abandonment of a small construction and cabinetmaking workshop and is available now. Dismantling and loading can be organized by us. Settlement by appointment. Buyers can also pick up and test the machine themselves on site. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline. Depending on the agreement of dismantling and loading, or removal, these m ...

Haffner SL100 Chain chisels with 2 milling units Roller Pads 1.7kW 400V 50Hz G&-5112-M3XQX

Code: 0370 Brand: HAFFNER - GERMANY Model: DGS 187 - CE Standard Double mitre saw with tilting blades for cutting wood, aluminum, pvc and various materials - CE Standard Technical data: Blades diameter mm 500 F 30 N° 2 motors each Kw 2,2 - Rpm 2800 Cutting length max mm 3400 Cutting length min mm 230 Blades inclination 45° - 90° Electronic positioning cutting length of left cutting unit Hydropneumatic saw feed Pneumatic workpiece clamping Control panel double buttons Electronic head positioning programmer N° 2 suction ports diameter mm 120 Compressed air 6 bar Overall dimensions mm 4600 x 1300 x 1650 h Weight kg 550

Description: End milling machine Manufacturer: HAFFNER, Type: AF 362, Year of manufacture: 1997, End milling machine with manual milling feed. Stop can be swiveled on both sides according to the scale 30P - 90° - 30°. Stop drum for 4-way milling depth adjustment. Milling height adjustable with handwheel and scale. Stable cast construction. Quick-change device for changing cutters. With sheet steel stand and pneumatic workpiece clamping. Spindle diameter: 20 mm Spindle length: 115 mm Stop length: 850 mm Milling path max: 300 mm Stop swivels by: 45 ° Main motor: 1.5 kW Milling feed: manual Workpiece clamping: pneumatic Weight approx.: 160 kg Approx. Onsite Dimension. (l x w x h): 1,100 x 1,100 x 1,400 mm, weight approx.: 100 kg

cutting width: 375 mm Cutting height: 150 mm dimensions of saw-blade: 500 x 30 mm Motor output: 2 x 3 kW Cutting length: 5100 mm speeds: 2800 U/min air pressure: 6 bar weight of the machine ca.: 700 kg dimensions of the machine ca.: 6100 x 1450 x 1450 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of milling agregates: 2 St. milling stroke vertical: x mm Profile height max.: x mm weight of the machine ca.: 150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of milling agregates: 3 St. : 300 x 120 mm weight of the machine ca.: 140 kg Motor output: 1,5 kW Speed: 12000 U/min. stroke: 120 mm clamping range: 190 x 160 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- technically efficient, ready to work - after full service - motor power: 2x 1.1 kW - disc diameter: 2x 250 mm, 2x 95 mm - pneumatic profile clamping

- technically efficient, ready to work - after full service - motor power: 0,5 kW - disc diameter: 175 x 20 mm, 95 x 20 mm - pneumatic profile clamping

Router, router, hand router -Handover: in current condition as seen -Accessories: collet, but without clamping nut, depth stop -Speed: 12000 rpm -Rated consumption: 800 watts -Connection: 230 volts -Dimensions: 320/320/H320 mm -Weight: 12kg

x-travel: 300 mm y-travel: 120 mm z-travel: 120 mm clamping range: 190 x 160 mm Required air-pressure: 6 bar distance spindle /table: 21,5 mm turning speeds: 12000 U/min total power requirement: 1,1 kW weight of the machine ca.: 95 kg dimensions of the machine ca.: 700x900x1600 mm Copy router BF 365 with automatic switching - Pneumatic clamping device - Automatic shifting - Centering device with scale - Milling area 300x120 mm - Stroke 120mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

lockboxcutter unit: yes; pusher hole unit: yes; face milling: yes;

Chain stemmer. Stülpfräe Handle / door lock cutter

Technical details: - Mortise depth: 150 mm - Max. slit length: 220 mm - Max. chain width: 40 mm - Longitudinal table movement: 160 mm - Table transverse movement: 90 mm - Inclination: 5° - with 1 x chain (mounted) - with sheet steel stand - with oil lubrication device - with quick adjustment - with instruction manual Engine data: - Three-phase motor, consumption: 2.2 kW - Power, output: 1.5 kW - Voltage: 220/380 V - Current: 6/3.5 A - Frequency: 50 Hz - Speed: 2,800 rpm Dimensions (LxWxH): Transport dimensions: Machine weight: 72 kg Weight of sheet steel stand: 35 kg The machine has been completely cleaned, overhauled and checked for correct functioning. It is supplied with a mounted connection cable with a 16A three-phase plug. (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we wo ...

Door lock milling machine Three separate motors are available for machining the lock body Horizontally and vertically adjustable for different locking systems You can call or write to us. We can speak and write German and Russian. You can also send messages in English 12.6.1.

Description: Pressure approx. 8 t Punching cross-section in sqmm -- Stroke 28 mm Installation height 140 mm Machine weight approx. 85 kgPneumatic press, high-quality technology for professional use in Industry and trade - Welded construction in C-shape - Air consumption approx. 6 liters weight approx.: 85 kg, Approx. Onsite Dimension. (l x w x h): 400 x 400 x 400 mm

Description: Machine number: 21453 Operating voltage: 220/380 V Frequency: 6/3.5 A Mortise length: approx. 200 mm Approx. Onsite Dimension. (l x w x h): 680 x 600 x 2,000 mm, weight approx.: 200 kg