used HERBOLD HGS

According to the description below

mechanical dryer drive 90 kW BRAND NEW MACHINE centrifugaldryer for surface drying of the material fraction primarily for film flakes, granulate from PET bottles and other rigid types of plastics.

Cutting mill / granulatgor - heavy duty Machine type: SM 800/1200-S7-2 Manufacturer: NEUE HERBOLD Drive: 132 kW Rotor diameter: 800 mm Working width: 1200 mm

Hammer mill Manufacturer: NEUE HERBOLD Type HM 450/300 Working width: 300 mm Rotor width: 450 mm Drive: 18.5 kW -NEW MACHINE- size reduction of brittle plastics like electronic scrap, wood scrap, and organic insulation material.

Cutting mill (heavy version) Type SM 600/1000-G3-3 Drive: 75 kW Built: 2006 Rotor diameter: 600 mm Working width: 1000 mm

Output Capacity: 500 kg/h // Rotor Diameter: 560 mm

Machine type: friction washer / friction separator Manufacturer: NEUE HERBOLD GMBH Year of manufacture: NEW rotor diameter: 560 mm working length: 3000 mm Drive: 30 kW for integration in recycling processing plants - to wash plastic materials such as film flakes, foil chips, granules, PET bottle-flakes,...

Material conveying blower Manufacturer: NEUE HERBOLD Type MFT 55/500 VA Version in stainless steel Drive 11 kW

The plant is suitable for the agglomeration of thermoplastic films and fibers. Depending on the material, the throughput is between 500 kg – 1000 kg/h. The facility consists of: • Feed belt • Load-dependent control for the feed belt • Metal detection coil • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo Ce9vqix • Plastcompactor unit HV-70, which consists of storage silo feed auger, plastcompactor, central blower and cooling circuit • HERBOLD recutting mill type SML 45/100-S4-2 • Intensive cooling • Conveyor blower SZS II 630/200 • Screening machine • Undersize recirculation into the compactor silo • Material conveying type MFT with big bag station and automatic diverter to the on-site silo • Automatic exhaust air filter • Electrical circuit •Compressor.

Cutting mill / Granulator brand: NEUE HERBOLD manufacturing year: brand new machine drive: 55 kW Rotor-width: 450 mm Working-width: 1000 mm Rotor with 5 blade-rows 2 stator-blade rows Roller feed hopper size reduction of loose film, hollow containers, barrels,...

Three-shaft shredder / pipe shredder - designed for the crushing of thick-walled pipes Manufacturer: NEUE HERBOLD New machine Drives: 2 x 30 kw - 1 x 37 kW

The HERBOLD plastcompactor is a system for the agglomeration of films, fibres, chips, dust and flakes. Poorly free-flowing waste is turned into an agglomerate with a high bulk density and good flowability, which can therefore be applied directly to extruders and injection moulding machines. The plant for sale has a main motor with 110 kw drive power and a throughput of 600 to 2000 kg/h depending on the feed material. All thermoplastics can be processed, even sensitive materials such as PET, PA, and bioplastics can be agglomerated without thermal damage or discoloration. The system consists of the feeding device with silo, the compactor, a re-cutting mill with sifting and fine material return On request, a pre-shredding can be offered that is adapted to the task Tests can be carried out in our technical center for suitability tests and sampling. We are the manufacturer of this s ...

Cutting mill / Granulator brand: NEUE HERBOLD manufacturing year: brand new machine drive: 45 kW Rotor-width: 450 mm Working-width: 600 mm Rotor with 4 blade-rows 2 stator-blade rows Roller feed hopper size reduction of loose film, hollow containers, barrels,...

Cutting mill Manufacturer: NEUE HERBOLD Built: 2001 Drive: 7.5 kW for the grinding of foils: optional with roller feeder type EB 290 (drive 0.75 kW)

2016 NEUE HERBOLD Side mill Find more here - / Contact us at -

Granulator especially designed for inline size reduction of thin film (like BOPP / BOPET). Feeding via roller feeder. Extreme througput rate ! brand: NEUE HERBOLD made in germany - heavy duty model - drive 250 kW - size reduction of film - feeding via roller feeder - Rotor diameter: 800 mm - working width: 1950 mm - for very high throuput rates for the size reduction of film, tangled or bunched tapes and bands, PP big bags, crates or other hollow containers, BOPP / BOPET / PP in-line and off-line film extrusion lines.

HERBOLD Fine Grinding Plant PU 300 Suitable in particular for plastic fine grinding, but also for other soft to medium-hard materials Complete system, assembled in a steel structure, pre-wired and immediately ready for operation (plug and play) Composed of Steel construction, installed there: dosing trough, metal separator, fine mill with 22 kw motor, extraction (optionally with screening machine), electric control The mill is a universal mill and can be equipped with different grinding tools (currently installed: grinding discs) Throughput capacity for fine plastic grinding approx. 100-500 kg/h depending on the material and final fineness.

Mechanical dryer / drying centrifuge Type TM 1005 Manufacturer: NEUEHERBOLD Drive: 55 kW - New machine - for mechanical surface drying of the grinding material for surface drying of grinding material fractions, preferably film chips, granules of PET bottle dandinery and other hard plastic products

Cutting mill / universal cutting mill GENERALOVER / with new rotor Manufacturer: NEUE HERBOLD Drive: 75 kW Rotor diameter: approx. 450 mm Working width: approx. 1200 mm Rotor with 4 knife rows Stlet knife rows: 2

Cutting mill / pipe cutting mill Special mill for shredding pipes Feeding via feeding shaft (rope pull system) Manufacturer: NEUE HERBOLD, D-74889 SINSHEIM Rotor diameter: 800 mm Working width: 600 mm Drive: 110 kW

Cutting mill Manufacturer: NEUE HERBOLD Drive: 37 kW Funnel: optional Rotor diameter: approx. 300 mm Working width: approx. 800 mm Knife rows Rotor: 3 Stlet knife rows: 2

Manufacturer: NEUE HERBOLD, D-74889 SINSHEIM Machine type: Washing drum Diameter: approx. 1600 mm Length: approx. 6150 mm Application: By means of the washing drum, the dirty, pre-shredded plastic fraction is (pre-shredded foil bales, bottles, other highly contaminated plastics) free of large contaminants such as stones, metals, glass, etc., so that the pre-cleaned material can be further processed in the further recycling process.

Cutting mill - made in germany - Manufacturer. NEUE HERBOLD - New machine - Drive: 75 kW Conveyor belt funnels Inlet cross-section: 720 x 980 mm Rotor diameter: 600 mm Working width: 980 mm Number of blade rows Rotor: 5 Number of stendor knives: 2 The NEW HERBOLD cutting mill of the LM series is specially designed for crushing voluminous plastic waste with thin to medium wall thickness. Applications include: shredding of foils, canisters, profiles, main and secondary profiles, bumpers, injection moulding parts, etc.

Cutting muehle - heavy execution - Manufacturer: NEUE HERBOLD New machine Funnel optional / conveyor hopper / funnel with screw feeder Drive: 200 kW Rotor diameter: approx. 800 mm Working width: approx. 1600 mm Rotor with 9 knife rows Stator knife: 4

Profile cutting mill (with self-feed behavior) Drive: 45 kW with long-part funnel and short-part funnel