used HAZEMAG AP

Impact mill Hazemag Type: APV 1014 Inlet opening : 1400 x 250 mm

Impact mill Hazemag Type: APK 20 Inlet opening : 700 x 270 mm Incl.: E-motor

Feed channel Hazemag 4000-1400 Brand: Hazemag Dim. feed channel: length 4000 mm - width 1400 mm. Drive: 2 vibration motors of 5.6 kW each Incl.: springs.

Feed channel Hazemag 5000-1200 Brand: Hazemag Dim. feed channel: length 5000 mm - width 1200 mm. Drive: 2 vibration motors of 4 kW each

Conveyor belt Hazemag Brand: Hazemag *H1= A.A length: 11,500 mm, belt width: 600 mm, drive: 1.1 kW. *H2= A.A Length: 14,800 mm, belt width: 600 mm, drive: 3 kW. *H3= A.A length: 3,500 mm, belt width: 500 mm, drive: 1.5 kW. *H4= A.A length: 12,500 mm, belt width: 500 mm, drive: 3 kW. *H5= A.A length: 10,500 mm, belt width: 500 mm, drive: 2 kW.

Hazemag feed hopper with take-off conveyor Brand: Hazemag Dim. Bunker : 6800x1900/1000x1200 mm Trigger strap: belt width 1200mm, length 8M. Drive: Slip-on gearbox 1.5 kW

Conveyor belt Hazemag Brand: Hazemag Type: HAZ *HAZ1= A.A length: 22,000 mm, belt width: 1200 mm, drive: 22 kW. *HAZ2= A.A length: 23,000 mm, belt width: 1000 mm, drive: 18 kW. *HAZ3= A.A length: 22,000 mm, belt width: 1200 mm, drive: 22 kW. *HAZ4= A.A length: 18,500 mm, belt width: 800 mm, drive: 5.5 kW. *HAZ5= A.A length: 14,500 mm, belt width: 1000 mm, drive: 11 kW. *HAZ6= A.A length: 15,000 mm, belt width: 800 mm, drive: 7.5 kW.

Feeder Hazemag 3800-1800 Brand: Hazemag Dim. feed channel: length 3800 mm - width 1800 mm. Drive: 2 vibration motors of 7 kW each

Feed chute Hazemag 2500-1000 Brand: Hazemag Dim. feed channel: length 2500 mm - width 1000 mm. Drive: 2 vibration motors of 1.7 kW each

Hazemag Steel Link Conveyor Belt with Bunker Brand: Hazemag Dim. steel links conveyor belt: A.A length 15500 mm, belt width 1400 mm. Drive: 2 pieces of slip-on gearboxes of 15 kW each Weight about 40 tons. Condition : very good condition

Hazemag Feed hopper with conveyor belt Brand : Hazemag Dim. bunker : 4000 x 1900 x 600 mm Conveyor belt : length 4500 mm, belt width 800mm Drive: Slip-on gearbox about 5.5 kW.

Feed channel Hazemag Brand: Hazemag *Dim. feed channel: length 1500 mm - width 1000 mm. Drive: 2 vibration motors of 2 kW each Incl.: Ferdern *Dim. feed channel: length 2500 mm - width 1100 mm. Drive: 2 vibration motors of 1.1 kW each Incl.: Ferdern

Hazemag Feed Hopper with Vibratory Chute Brand: Hazemag Dim. bunker: 4000 x 2500 x 1350 mm Feed chute: length 4000 mm - width 1200 mm, Propulsion: two vibration motors of 3 kW each.

Prallbrecher Prallmühle Steinbrecher Einwellenshredder used Manufacturer: HAZEMAG / KLEEMANNs Type: WMS 800/1 Rotor diameter: approx. 800 mm without a fallback mechanism Filling shaft approx. 800 x 600 mm Ejection shaft approx. 1200 x 800 mm Dimensions without motor: approx. 2600 x 2300 x 2300 mm The drive succeeds via V-belts and can be individually adapted to the requirements.

Hazemag Impact Mill AP 4 complete with drive, spare rotor + spare parts. Capacity: approx. 150 T/h. Power requirement: 35 to 80 kW. Mouth width : 700 x 1000 mm. Weight: approx. 11000 kg

TECHNICAL SPECIFICATIONS Manufacturer: HAZEMAG & EPR GmbH Description: Impact Roller Crusher Type: SB 1315R Year of construction: 2013 Design: driveless crawler chassis Operating hours: approx. 12,000 h Throughput: 600 t/h Bunker load: max. 80 t Feed grain: 0 - 1,200 mm Final grain: 0 - 250 mm Infeed width: 1,510 mm Inlet height: 1,670 mm Roller diameter: 1,300 mm Roller speed: 300 1/min Roller drive power: 250 kW Conveyor drive power: 2 x 55 kW Length chain conveyor: approx. 15,000 mm Light range chain conveyor: 1,200 mm Dimensions of the entire system (L x W x H, approx.): 23,500 x 6,700 x 5,700 mm Total weight: 110,000 kg (incl. tax container) SPECIFIC COMMENT - Mobile primary crusher plant for soft to medium-hard rock - low-precision comminution (designed for limestone) - Incl. 1 pc. gebr. Set of scratching irons with chain - Incl. control container If  ...

Air-separator for hard material, drum diameter x width: 1,400 x 1,200 mm, feeder 1,000 x 1,500 mm with vibrator, blower with approximately 7,000 cbm flow, including steel-frame, machine is to separate heavy material from light one

With Electrical motor

Pre-breaker with crusher Suitable for soft lime, marl, coal Power up to 200- 600 t/h Task size up to 1500mm Drive - electric transformer station 30kV/400V Drive power approx. 500 kVA Plant weight approx. 130 tons Task bunker 25m3 Chain conveyor Roller rust Schlagwalzenbecher Deduction tape Dust removal system Caterpillar suspension - not self-driving Conveyor belt 3 x 40m Telestack, self-driving, belt width 1200mm Immediately available

Mach. No.: AD 26953 - Motor: Scania - Rotor size: 1.400 x 1.500mm - Included: Conveyors, Overband Separator, Dumpbunker, Feeders, Pre-screen and Hydraulic openingssystem

Ready for operation with 2 sets of new impact strips

TEKO mezzanine incl. floors, 2x stairs, 2x pallet transfer station & railing Current price € 60.000,- EXTREMELY LOW PURCHASE PRICE! Detailed info: A very well preserved 2-storey mezzanine floor from TEKO from 2016. Current original price without construction is about € 60,000 €! The price includes the floors, 2 stairs, 2 pallet transfer stations and the railing. The mezzanine floor must be dismantled and transported away by the end of April, if necessary a dismantling can be organized by the former supplier (dismantling costs: approx. € 7,000). Area: 1st floor: approx. 143 m² 2nd floor: approx. 43 m² Height: Top edge 1st floor area: 2,800 mm Upper edge 2nd floor area: 5,600 mm Accessories: Incl. floors, 2x stairs, 2x pallet transfer station & railings All information without guarantee according to manufacturer / supplier!

Merer handle applicator type: CM/HA 60 the machine worked in the Tetra Pak line on the 1000 ml SQ Prisma format

CONTROLS   CNC controls HEIDENHAIN TNC 530 WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 3   X-axis travel: 550 mm   Y-axis travel: 460 mm   Z-axis travel: 460 mm TABLE   table surface (left-right): 800 mm   table surface (front-back): 460 mm   workpiece load (max): 300 kg SPINDLE / HEAD   tool fixture: ISO SK 40   spindle revolutions (max): 12000 /min AXIS DRIVES   rapid traverse X: 30000 mm/min   rapid traverse Y: 30000 mm/min   rapid traverse Z: 24000 mm/min TOOL MAGAZINE   number of positions: 24 AUTOMATIC WORKLOAD EQUIPMENT   number of pallets: 2 ELECTRICAL SPECIFICATIONS   mains power supply: 30 kVA   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS  &n ...

<br>AGFA APIS-Board Rev. A5. For AccuSet 800 / 1000 and Avantra 25<br><br><br>br>Verf Gbar: now