used FILOX KF

used, kpl. 1 year warranty, plate size 800 x 800 mm, 50 plates, closed outlet, 20 mm cake thickness, pressure max. 15 bar, capacity approx. 520 liters, filter area 522, dimensions 5000 x 1400 x 1500 mm, weight5000 kg, motor hydraulics, drip plate, filtrate gutter, with or without filter cloths

used, kpl. 1 year warranty, plate size 800 x 800 mm, 35 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 460 liters, filter area 36m2, dimensions 3500 x 1200 x 1500 mm, weight 4000 kg, motor hydraulics, drip plate, filtrate gutter, with or without filter cloths

used, kpl. 1 year warranty, plate size 630 x 630 mm, 30 plates, open outlet, 25 mm cake thickness, pressure max. 8 bar, capacity approx. 234 liters, filter area 19m2, dimensions 3000 x 1200 x 1600 mm, weight 2 to, motor hydraulics, drip plate, filtrate channel, with or without filter cloths, attached compressed air diaphragm pump

used, kpl. 1 year warranty, plate size 630 x 630 mm, 45 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 360 liters, filter area 28m2, dimensions 3800 x 1400 x 1600 mm, weight 2.5 to, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

Chamber filter pressing rack Filox uses 1200 x 1200 with approx. 100 records

If mobile chamber filter press / used filter press Filox 800 x 800 construction year: In 1980 record format: 800 x 800 mms benefit length: 5,200 mms chamber number: 88 pieces cake thickness: 25 mms filter pressure: 15 cash Schliessdruck: Min 300 cash, max. 320 cash whole filter surface: approx. 98 square metres cake volumes ges .: approx. 1,100 litres engine tension: 380 V, 50 hertz protective kind: IP 44 record material: PP expiry: openly service side: on the left cloths: Optionally

4-side squaring and edge banding line Machine 1: Fixed side right, moving side left Rolling chain, feed 10 - 40 m/min Controlls NC 21 Panel thickness 8 - 60 mm Max. panel width 1500 mm Edges: coil 0,3 - 3 mm, strips 0,4 - 20 mm Entry fence for veneered panels Equipment: 1+1 Compact-twin hogger, 2 motors 6,6 kW 1+1 Compact hot melt unit A20 with panel edge pre-heating, glue roller Q34, twin coil magazine, lateral pressure rollers C including anti-stick application 1+1 Free space for solid wood edges up to 2,54 m length 1+1 Rough trimming, 2 x 1,5 kW 1+1 Fine- or radius trimming, 2 x 0,4 kW (edges up to 6 mm) 1+1 Universal shaper 8,1 kW 1+1 Universal shaper 8,1 kW 1+1 Edge sander KS 10 1+1 Disc sander DS 40 1+1 Disc sander DS 40 Angular transfer to the right, TWR 24/30/12/S Panel sizes: width 250 - 1200 mm, length 250 - 3000 mm, thickness 8 - 45 mm Machine 2 Machine II + infeed magazine TW ...

Control cards -Replacement cards for: -Homag type: KFL 53 -Homag type: KFL 54 -Homag entrance cards -Homag control cards -Homag controller cards -Cabinet: is only sold complete -Weight: 200 kg

used, kpl. 1 year warranty, plate size 630 x 630 mm, 60 plates, open or closed outlet, 30 mm cake thickness, pressure max. 15 bar, capacity approx. 576 liters, filter area 40m2, dimensions 4800 x 1200 x 1200 mm, weight 2.5 tons, motor hydraulics, drip plate, filtrate channel, with or without Filter cloths

used, kpl. 1 year warranty, plate size 630 x 630 mm, 45 plates, open outlet, 25 mm cake thickness, pressure max. 15 bar, capacity approx. 350 liters, filter area 28m2, dimensions 4200 x 1100 x 1700 mm, weight 2 to, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

Level compressor 300 litre fuel tank 11 HP

Board repair line with double end profiling line in top condition !! Workpiece parameters of the plates: Min.: 900 mm x 200 mm Weight min. : 17 mm Max .: 5000 mm x 1250 mm Max. Weight: 60 mm Weight: max. 150 kg < Accuracy: +/- 0.2 mm The portals have a max. Clock power of: max. 6 cycles / min The max. Partial performance: 18 parts / min (DEP line) Year of construction 2008 Condition: good (Original price of the line 2008 Euro 4.9 million) Consisting of: * Feeding station with feeding rollers, * Automatic vacuum lifting table for lengths up to 6 m * Conveyor systems * Repair line 1 * Turning station * Transfer service * Repair line 2 * automatic vacuum lifter for stacking (6m) * Stacking roller conveyor * Control cabinet with machine control * Profilfraessanlage * Stacking Tables; very well

used, kpl. 1 year warranty, plate size 470 x 470 mm, 35 plates, open or closed outlet, 25 mm cake thickness, pressure max. 15 bar, capacity approx. 150 liters, filter area 13m2, dimensions 3000 x 1200 x 1200 mm, weight 1.2 to, hand hydraulics, drip plate, filtrate channel, with or without Filter cloths

used, kpl. 1 year warranty, plate size 470 x 470 mm, 30 plates, open outlet, 25 mm cake thickness, pressure max. 15 bar, capacity approx. 130 liters, filter area 11m2, dimensions 2800 x 800 x 1200 mm, weight 850 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

used, kpl. 1 year warranty, plate size 400 x 400 mm, 30 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 90 liters, filter area 8m2, dimensions 2500 x 700 x 1200 mm, weight 700 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

A used STRASSBURGER frame filter press type KFP III C-E, Clean System, with 30 frames, Y.O.M. 2004, factory overhaul 2016 in stainless steel version is offered here. Since then, only used for 5 filtrations. "Universal use for beverage processing and filtration of must, juice and wine. Filter frames made of polypropylene with integrated filter cloth made of polypropylene with elastic trim. External sealing of the filter plates by means of an O-ring at the edge of the plate and at the drain channels, in accordance with the Clean System." Technical data: 29 chamber plates 470 x 470 mm incl. profile cloths in polypropylene according to Clean System 1 head plate incl. profile cloth 1 end plate incl. profile cloth 1 bulkhead plate 10.2 m2 filter surface 135 l chamber volume Dimensions: Length: approx. 2,900 mm Width: approx. 890 mm height: approx. 1,600 mm Fitting  ...

; Mileage [km]: 6; Power [PS]: 380

Manufacturer: Strothmann Type: FW KFW RS25 5T Year of construction: 2015 Available quantity: 12 pcs. Location: Nuremberg Payload: 5000 kg Dimensions: 1.2 x 1.26 m Width over all: 1420 mm Installation height: 0.6 m Track gauge in main direction: 1100 mm Track width in transverse direction: 1000 mm Drive power: 0.25 kW Powertrain: bevel gear, two cardan shafts and four hubs for connection Weight: 1000 kg Base frame: Sturdy welded construction Loading area: four manually adjustable sliders with grids to provide center nests in four stages Included: drive cassettes, pneumatic lifting device for lane change, floor centering, coupling mechanism for towing operation The beams were used in a line for transporting and assembling gearboxes and motors OPTIONAL: The entire line with rail system and control cabinets etc. is optionally available until dismantling in mid-Novembe ...

used, kpl. 1 year warranty, plate size 1000 x 1000 mm, 80 plates, open or closed outlet, 25 mm cake thickness, pressure max. 15 bar, capacity approx. 1700 liters, filter area 130m2, dimensions 8500 x 1700 x 1800 mm, weight 11 to, motor, drip sheet, filtrate channel, with or without filter cloths

used, kpl. 1 year warranty, plate size 500 x 500 mm, 30 plates, open outlet, 20 mm cake thickness, pressure max. 15 bar, capacity approx. 115 liters, filter area 12m2, dimensions 3000 x 1000 x 1400 mm, weight 1300 kg, motor hydraulics, drip plate, filtrate gutter, with or without filter cloths

used, kpl. 1 year warranty, plate size 400 x 400 mm, 20 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 60 liters, filter area 5m2, dimensions 2500 x 700 x 1500 mm, weight 1000 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths, Piston pump with cpl. Piping with built-up

properties Used belt conveyor Incl. drum motor Incl. side guidance Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional 1 pcin in stock Technical data: Manufacturer: Krups Conveyor Systems Type: KF308800/300 Dimensions of the belt conveyor Total length: 8,800mm Total width with motor: 370mm Total width without motor: 300mm Drive, drum motor Belt width: 270 Belt type: Steering grooves Frame: Steel Information on the page guidance Height: 30mm Width: 20mm Material: Aluminum belt conveyor The belt is ideal in the picking zone for interlocking machines or workstations and to optimize the internal process. During transport, the belt conveyor can transport sensitive and different sized containers, boxes or other packaging and article units to the feed-off or dispensing point and also serves, for example ...

used, kpl. 1 year warranty, plate size 400 x 400 mm, 30 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 90 liters, filter area 8m2, dimensions 2500 x 800 x 1400 mm, weight 800 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

used, kpl. 1 year warranty, plate size 400 x 400 mm, 25 plates, open outlet, 25 mm cake thickness, pressure max. 10 bar, capacity approx. 75 liters, filter area 6m2, dimensions 3500 x 800 x 1600 mm, weight 1300 kg, motor hydraulics, drip plate, filtrate channel, with or without filter cloths, built-up Häcker piston pump with kpl. VA - Piping

used, kpl. 1 year warranty, plate size 630 x 630 mm, 50 plates, closed outlet, 30 mm cake thickness, pressure max. 15 bar, capacity approx. 480 liters, filter area 33m2, dimensions 4300 x 1200 x 1200 mm, weight 2.2 to, motor hydraulics, drip plate, filtrate gutter, with or without filter cloths