used FORTE FKA

Circular automatic saw make FORTE type FKA 45Built in 1970Saw blade dimensions: 225 x 32 x 2 mmCutting performance in non-ferrous metal: 60 mmCutting performance in steel: 45 mmSection length automatically up to: 200 mmCutting speeds: 35 - 900 m / minFeed rate hydraulic: 300/600 mm / sDrive power: 4/5 kWDimensions L x W x H: 2700 x 700 x 1250 mmWeight approx: 1033 kgWith- Bar magazine for steel and non-ferrous metalsExclusively non-ferrous metal has been produced on the machine!used, from an operating resolution, despite the year of constructionin very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Forte cold circular sawing machine with roll feed. Outfeed table and bundle magazine doesn't exist.

saw blade diameter: 225 mm cutting diameter: max. 60 mm feed: max. 600 mm total power requirement: 5 kW weight of the machine ca.: 1,03 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Metal bandage gemaess picture

Band saw, with double feed

Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Technical data Cut range: round up to: 250 mm Square: 250 mm Execution: Horizontal hydraulic Automatic Cut length: min.: 3 mm max: 2 X 400 mm Cutting speed: stepless from: 14 m/min up to: 116 m/min Roll diameter: 460 mm Band length: 4100 mm Voltage 50 Hz 3x: 380 Volt Power: 4.00 kW Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1700 mm Width: 1500 mm Height: 1350 mm Various accessories: Coolant system

Cutting area round: 250 mm Cutting area rectangular: 250 mm Saw band dimensions: 3660 x 25 x 0.9 mm Band speed: 20 - 70 m/min Saw drive: 1 kW Space requirement: 1900 x 1450 x 1250 mm Weight: approx. 850 kg

Description Universal band saw of the Brand Forte suitable for tooling, fixture construction, training as well as mould making Cutting diameter: 400mm Sheet: 4870mm Technical data Cutting diameter 400mm Sheet 4870mm Speed 20-30-40-60 m/min Coolant Yes Connection 50 Hz 3x 380V Spindle motor 2.2KW

Capacity round maximum diameter: 1780 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm SPECIFICATIONS Bandsaw / Circelblade / Automat  bandsaw   Angle L / R Degrees  90 gr Cutting capacity 90 ˚ Ø  1780 mm Cuttting capacity 90 ˚ Flatt   1780 x 1780 mm Max. cutting length 450 mm

- 2 saeulen-execution - Working area Durchm. u. Square 420 mm - Material feed length 3 - 600 mm single feed , - Cutting speed infinitely variable 12-100 m/min. - Heegeband dimensions 6050 X 40 X 1.3 mm - Drive 9.5 kW - Dimensions L/BH 2050 x 2725 x 2080/ 2530 mm - Weight: 4000 kg - Machine dimensions: L x W 1500 x1900 mm - Weight: approx. 1700 kg

60″ x .135″ x 20,000Lb Cincinnati – Forte Loop Slitting Line Material Width: 12″ – 60″ , Thickness: .010″ – .135″, Weight: 20,000Lb, Coil ID: 16″ – 24″, Coil OD: 72″, Speed: 600 fpm, Direction: Left to Right. Entry Turnstile, Entry L-Type Coil Car, Mandrel Uncoiler with Hold-Down Roll, Powered Peeler, Driven Pinch Rolls, PVC Applicator, Entry Shear, Two Slitting Heads, Injection Design, 5″ & 7″ Arbor Diameter, 75HP DC Motor, Two (2) Hydraulic Scrap Winders, Pit Cross Over Table, Drag Board & Rotary Tension Stand, Recoiler with Over-Arm Separator & Push-Off, 150HP DC Motor, Exit L-Type Coil Car & Turnstile. Electrics, Hydraulics, Controls, Tooling, Spare Parts

cutting diameter: max. 250 mm feed:: . accessories:: Ersatzbänder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1986 Forte SBA 401.S 1. designation of the machine Forte band saw 400x400 mm 2. manufacturer of the machine: Forte 3. year of construction: 1986 4. intended use of the machine Sawing of metallic materials 5. current condition: Used, ready for operation on inspection TECHNCAL DATA Working range Rods and tubes up to 0 400 resp. Maximum cut-off length 600 mm Double feed 1. 200 mm Power requirement ca. 9,5 KW Sage drive motor power 4, 7 / 6 K I Gearbox for Sage drive Stober R 65VI•/ 4 Cutting speed I 12 - 50 m/min. Cutting speed Il 24 - 100 m/min. Sage belt dimension 6.200 x 38 x 1,2 mm Hydraulic oil ca. 46 Liter Viscositat 68 est bei 4□0c ca. 50 Liter (empfohlen "Curtis S 6") ca. 3.000 kg Coolant 800 mm Weight of the machine Material support height Find more here - / Contact us at -

Cutting range round/ square: 400mm, cutting speed: 12-100m/min.

Length: 2200mm, width: 1200mm, height: 535mm, weight: 385kg.

Offer 23148 Specifications: - With hydraulic clamping and feeding device - Cutting area approx. 320 mm - Square 300 x 300 mm - Large section length for single stroke up to 400 mm - Multiple feed up to 10 x 400 mm - Band saw dimensions 3660 x 25 x 0.9 mm - Cutting speed infinitely variable 20 - 100 rpm - Feed speed hydraulically infinitely variable - Coolant device - Material support height 720 mm - Saw band - Drive 400 V / 2.5 kW - Space requirement approx. W 1950 x H 1250 x D 1500 mm - Weight approx. 1000 kg

Iron cylinder. Induction-hardened rollers. Easy handling thanks to mobile control panel with pushbuttons. Conical bending device. Hot-rolled steel rolls SAE 1050 (CK 45). Main motor with braking system. Precision bending with brake motor. Wire grooves at roll ends. Spheroidal cast-iron main frames. Upper and lower rollers driven by a single gearbox and gear system (RM). Steel rollers with SAE 1050 quality certificate and high tensile strength. Built to CE safety standards

Description: Machine number: 4259 Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 15 A Cutting length: approx. 400 mm weight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,600 x 1,200 mm

Article number: 19-03-029 Manufacturer: Forte Good general condition Delivery time: immediately available Machine workshop tested Year of construction: ca.1975 L x W x H: approx. 1900x1600x1650mm Weight: approx. 1000kg Saw blade dimensions: approx. 3660x27x0.9mm Cutting range: Round: approx. Ø 250mm Square: approx. 250x250mm Flat: approx. 270x250mm Automatic material feed: approx. 3 - 400mm Cutting speed: approx. 10 - 70 m/min Drive power: approx. 3.5 kW Accessories  Coolant facility  Documentation  Piece count counter  Roller block Other accessories on request Price and other technical data on request

Key data: 320 mm, 4 mm

Belt speed: 20 to 100 m/min infinitely variable Feed: up to 400 mm, multiple times possible; max 10 x automatic feed Piece counters

Pressure sensor, pressure sensor, pressure switch -Manufacturer: Staefa Control system, unused OVP -Type: FKA-P21 -Measuring range: 0.5 ... 5 mbar -Dimensions: 140/130/H110 mm -Weight 0.5 kg

liter capacity: 28 l/min bei 40bar total power requirement: 6,6 kW kW weight of the machine ca.: t dimensions of the machine ca.: 1,62 x 0,8 x 1,20 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type VL 1500-2/14000 Vacuum filter 2 PC Type: VL 1500-E Technical specifications: Length 2520 mm Width 1900 mm Height 1560 mm Filter performance max. 1200 l/min per filter unit Equipment: Power consumption 6 kW Gear motor for belt drive 0,25 kW in conveying direction right Controlled filter pump 3 kW Controlled vacuum pump 2.2 kW Level Measurement by WHG Filter media Endless filter belt LAM-PET-74 A high proportion of very fine particles (

**Vacuum filter 1 PC Type: VL 1500-E Technical data: Length 2520 mm, Width 1900 mm, Height 1560 mm Filter flow max. 1200 l/min Equipment: Power consumption 6 kW Gear motor for belt drive 0,25 kW in conveying direction right Controlled filter pump 3 kW Controlled vacuum pump 2.2 kW Level Measurement by WHG Filter media Endless filter belt LAM-PET-74 A high proportion of very fine particles (

HYSTER 5.5 FORTENS forklift built in 2009 is dedicated for fast and safe transportation of loads with a maximum weight of 5500 kg. Thanks to its reliable design characterised by maximum stability and excellent visibility in all directions, the forklift is ideal for even the most demanding challenges inside and outside warehouses. The vehicle’s LPG ignition engine features super-fast glow plugs to ensure fast and reliable engine starting in all conditions. The HYSTER H5.5FT gas forklift weighs 8160 kg Technical specifications of the LPG forklift truck HYSTER 5.5 FORTENS - maximum lifting capacity: 5500 kg - maximum lifting height: 4445 mm - weight centre (5000 kg load): 600 mm - weight centre (4650 kg load): 700 mm - weight centre (3800 kg load): 1000 mm - mast type: triplex - hydraulic accumulator: HYDRA SMOOTH - drive type: gas - vehicle weight: 8160 kg