used FAT TUR

Fixed and walking lunettes for FAT Poles TUR 560 and TUR 630

Used Cnc Lathe FAT Type TUR 560 MN X 2000 mm Cnc SIEMENS 810 D Manual turn Used Cnc Lathe FAT Type TUR 560 MN X 2000 mm Cnc SIEMENS 810 D Manual turn Diameter on bench 560 mm Straggler diameter 300 mm Between tip 2000 mm Full features on photo Video available via WhatsApp...

Key data: 630 mm, 2000 mm, 2500 1/min

FAT TUR 630 MN - CNC lathe - Siemens Sinumerik 810 D CNC control - Movable control panel - Electric handwheels - 8-cavity tool turret - 3-jaw chuck Ø 400 mm - Incl. tools and accessories - Year of construction 2001 Specification - Circumferential diameter over bed: 630 mm - Circumferential diameter over slide: 370 mm - Center width: 2000 mm - Bed width: 433 mm - Gear stages: 2 - Speed: 2 - 2500 rpm - Spindle Inner Taper: Metric 115 - Spindle bore: 105 mm - Feed: 5 - 3200 mm/min - Tool turret mount: VDI 40 - Tailstock cone mount: MK5 - Tailstock quill diameter: 90 mm - Tailstock quill travel manual: 200 mm - Motor rated power at S1 / S6-60% / S6-40%: 12 / 15 / 18.5 kW - Dimensions without extraction system WxHxD: approx. 4000 x 1770 x 2400 mm - Dimensions with extraction system WxHxD: approx. 4000 x 2970 x 2400 mm - Weight: approx. 4500 kg

Machine Details Warehouse number 1105-03592 Machine type lathe - cycle controlled FAT brand Type TUR 630 MN Year of construction 2011 Control type CNC Control Siemens 810D MANUAL TURN Storage location FRANCE Country of origin Poland Delivery time immediately Freight base Freely loaded from location Technical details Turning diameter 370 mm Turning length 3000 mm Top height above bed 630 mm Circulation diameter max. via face slider 370 mm Spindle bore 105 mm Spindle speeds: 2 stages 2 - 2500 rpm Tool holder REVOLVER VDI 40 Control Siemens 810D MANUAL TURN Total power requirement 18.5 kW Machine weight approx. 6 t Information Equipment: REVOLVER 8 COMPARTMENT VDI 40 Chip protection wall automatic coolant device RS 232 interface 3-jaw chuck diameter 315 mm HOLLOW SPINDLE THROUGH. 105 MM automatic lubrication system Brochure LUNETTEN 1 STUCCO

Zaenraeder drive shaft flanges etc for Polish machines

FAT TUR560 MN X 1000 CNC lathe TUR560 MN X 1000 8 puppies 6 handles

This FAT TUR930SMN Lathe was mande in 2017 in Poland and has only 174 production hours. It is equipped with a SIEMENS SINUMERIK 840 D control unit. The machine has a spindle speed of 700 rpm.

1 fixed setting stick with roller quills 1 moving setting stick

turning diameter over bed: 630 mm turning diameter over slide: 370 mm control: SIEMENS 810 D centre distance: 2000 mm turning speeds: 2500 U/min Number of spindles: 2 St. spindle cone: 115 mm spindle bore: 105 mm feed: 5 - 3200 mm/min x-travel: 350 mm spindle taper: Camlock Din 55029-8 total power requirement: 18,5 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 2,7 x 2,23 m The machine was in operation until the end and is fully functional. There is no chuck on the machine and no accessories are available. A three-jaw lathe chuck DIN 55029 Ø 315 mm is required. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Center height: 315 mm Center distance: 2000 mm Spindle bore: 140 mm CNC Brand: Siemens CNC Model: 810 D Manual Turn FAT - TUR 630 A Teach-in Cycle lathe Ø 630 x 2000 x Bore 140 mm MACH - ID 6335 Make: FAT Type: TUR 630 A Control: SIEMENS 810D Manual Turn YOP: 2004 Swing over bed Ø   630 mm Swing over cross slide Ø     370 mm DBC Turning Length      2.000 mm Spindle bore       140 mm Spindle power     18,5 kW Bed width        433 mm Tailstock spindle Ø     100 Ø Stroke pinole      200 mm Spindle taper       5 Mk Workpiece weight      600 kg Speeds / ranges         1850 Rpm Feed rate X-Axis       8.000 m ...

Fat Tur Ø 630 x 1500 mm Distance between centers: 1500 mm Swing over bed: 630 mm Swing over cross-slide: 315 mm Number of speeds: 1800 rpm Weight: 3150 kg

Manufacturer: Fata Production Machinery (1995) Main Equipment: 2 pay off reels Entry Lap Welder (Taylor Winfield) Vertical Accumulator High Pressure Spray Cleaning Section Electrolyte Cleaning Section Brushing Cleaning Section Rinse Section Vertical Annealing Furnace (Selas) Flying Exit Shear 2 Tension Reels Line Capacity: 60.000 MT/year Maximum Process Section Speed: 113m/min Maximum Entry Section Speed: 136 m/min Maximum Strip Thickness: 0.28 mm Minimum Strip Thickness: 0.17 mm Maximum Strip Width: 1000 mm Minimum Strop Width: 700 mm Maximum Coil Weight: 18 MT Crew: 4 Operators

35 litre bowl cutter stainless steel 2 speed 1400/2800 2 machines year of construction 2013 and 2015

new fatosa 160 self feed mincer 3 plates 2 knife unger system Up to 5,000 Kg per hour, hopper capacity 100 Kgs all stainless steel

Qty. 1 Second-hand aluminium strip production plant Entry Material: Aluminium Scrap – HD666, AA5050, 2.5-3.0% Mg Final product: Aluminium strip (can stock) Width: 220 mm Thickness: 0.15 – 1.0 mm Mfc.: De Winter, Thermcon, Fata Hunter, Fröhling, Nederman, Burghardt & Schmidt, Siemens Built: 1984, 1999, 2000, 2002, 2014, 2015 Scope of supply: Melting Furnace Tilting Casting Furnace Block Caster 5 Stand Hot Rolling Mill 6 Stand Cold Rolling Mill Hot Gas Filter Slitter Welding Machine Treatment Furnace Quenching Unit Shear

ZINCALUM LINE FATA PRODUCTION MACHINERY Manufacturer: FATA PRODUCTION MACHINERY YOM: 1990 Main Equipment: 2 Uncoilers Entry lap welder (Taylor Winfield) 6 Strands Horizontal Entry Accumulator Horizontal Annealing Furnace (Non Ox Heating Section – Radiant Tube Soaking Section: 1 Jet Cooling –Sow Down Cooling Section, Down Chute with electrical heaters AJAX Pre-melt Pot (7 MT) – heated by Two 300 KW channel type inductors AJAX Coating Pot (60 MT) - heated by Four 300 KW channel type inductors. 3roll type Rig. KHOLER Air knives Coating thickness measuring (DMC) 6 Hi Leveller Chemical treatment (Inmersion Tank) Oiler Flying Shear 2 Tension Reels with edge control Strip width range 610 – 1220 mm Strip thickness range 0.30 – 0.85 mm Coil weight entry zone Max 18 MT Coil weight delivery zone Max 9 MT Maximum speed 120 m/min ZNAL  ...

1 Continuous Block Caster Mfc.: Fata Hunter Built: 1999 Capacity: 9 T/h Block size: 350-480 x 26 mm – W x T Flat bed / solidify length: 1.3 m

1 Continuous 5 Stand Hot Rolling Mill Mfc.: Fata Hunter Built: 2000 2 Rewinders Strip width: 480 mm Thickness: in 26 mm out 2.0 mm Qty. 1 Hot Gas Filter Mfc.: Nederman Built: 2015 Type: Flat bag filter Capacity Flow: 45000 Nm³/h Temp.: 125 °C Filter area: 650 m²

Height=1.14 m, Overall length= 0.52 m, Overall width= 0.52 m, Net weight= 140 kg,

Description: Automatic CNC bandsaw Serial number F53/00249 Cutting 0º/45º/60º Series number F53/00249 Cutting capacity in round at 90º: 280 mm Cutting capacity round 45º: 225 mm Cutting capacity round 45º: 225 mm Cutting capacity round 45º: 225 mm Cutting capacity round 60º: 140 mm Cutting capacity round 60º: 140 mm Cutting capacity round 60º: 140 mm Square cutting capacity at 90º: 240 mm Cutting capacity at 90º square: 240 mm Cutting capacity in square at 45º: 215 mm Cutting capacity in square at 45º: 215 mm Square cutting capacity at 60º: 95 mm Cutting capacity in 60º square: 95 mm Rectangle cutting capacity at 90º: 330 x 240 mm Rectangle cutting capacity at 90º: 330 x 240 mm Rectangle cutting capacity at 45º: 230 x 140 mm Rectangular cutting capacity at 45º: 230 x 140 mm Rectangle cutting capacity at 60º: 140 x 130 mm Rectangle cutting capaci ...

SKL regenerates turbocharger Manufacturer: VEB compressor construction Bannewitz (DDR) Type: R2 Equipment Nr. 2227-00008 Register-Nr. 256 n max 52000U/min t max 700 ° C m 95 kg Year of construction: 1973

Francis turbine, used 40 kW, 3 m³, height 2m Speed 106 / 375 RPM 69 HP, built in 1963 Generator Schorch GmbH Type KT 7315 s FB01 Z-Z 50 Hz, 512U/min 55kW

Kaplan turbine used 50 kW, 3 m³, height 2m Speed 150 / 460 RPM 70 HP, built in 1963 Generator Schorch GmbH Type KT7280S - DB05 Z-Z 50 Hz, 770 RPM 55kW

Lathe - cycle VOJUS Turntec controlled 63 bearing no 1105-02244 make VOJUS type Turntec 63 built in 1999 State second-hand machine control CNC SIEMENS 840 D storage France origin SK delivery immediately cargo base EX WORK technical details turning diameter 630 mm turning length 3000 mm control SIEMENS 840 D spindle bore 110 mm spindle speeds infinitely 2500 revs/min rapid traverse - longitudinal/plan 10/5 m / min dimensions L W H 3000 x 1800 x 1790 mm turning diameter over support 420 mm overall power demand 26 kW machine weight approx. 4,5 t description * CNC - control SIEMENS 840 D SHOP TURN * MULTI FIXED HOLDER * 1 open, revolving bezel TURNING DIAMETER OVER SLIDE 420 MM BED 6300 TURNING LENGTH 3000 MM 2500 U/MIN

Control electronics for turbomolecular pumps (Turbotronik) (e.g. for Turbovac 361) Manufacturer: Leybold Type : NT 20 Status: over-prun & functional Delivery time: ex stock (intermediate sale reserved; ready for use