used FASTI 104

CNC Bending Machine Fabr. FASTI Type 104-20-1Machine -No: 9314008 Year 1993Effective length: 2040 mmSheet thickness: 1.0 mmRoll diameter: 80 mmMotor power: 1,1 kWWeight approx: 660 kgWith- CNC Control- 4 different cambered rollersxa0xa0 for extremely precise tube productionused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Max. bending length: 2040 mm Max. sheet thickness: 1.25 mm steel Clockwise and counterclockwise rotation via foot switch 3-roller drive Safety pull switch Conical rounds possible

Offer 24329 Specifications: - Max. working width 1040 mm - Max. material thickness 3 mm - Roller diameter 96 mm each - Stroke 70 mm - Rear roller motorized height-adjustable - Rear roller + lower roller adjustable for conical bending - Upper and lower roller motor-driven - Working speed right + left 6 m/min - Drive 400 V / 1.5 kW - Space requirement approx. W 1850 x H 1200 x D 870 mm - Weight approx. 800 kg - with: - asymmetrical roller arrangement - Motor bending - Swing-out upper roller - E-footswitch for clockwise and counterclockwise rotation

sheet width: 2040 mm plate thickness: 1,25 mm pre-bending: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Right and left rotation via foot switch Safety cable switch Conical rounding possible The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max bending length: 1020 mm Max. sheet metal rod: 2 mm steel motor upper cheek adjustment via foot switch manual rear stop diverse bending rails

Maximum cutting length: 4000 mm Maximum sheet thickness: 4 mm steel Driven back gauge to 1000 mm Page fence and table extensions Cutting length limit Cutting edge lighting Protection fence, roll with safety switches Weight: 8500 kg

CNC swivel bending machine make FASTI type 2095-12-3Machine -No: 85295040 built in 1985Technical specifications:Usable length: 1270 mmmax.sheet thickness: 3.0 mmStroke of the upper beam: 350 mmAdjustability of the lower and bending beam: 80 mmDrive power bending / upper beam: 2.2 / 1.5 kWWeight approx: 1480 kgExternal dimensions: 2500 x 3600 x 1700 mmWith- CNC stop table 2500 mm- foot switch- Two-handed disengagement- CNC screen control with floppy disk driveSPECIAL PRICE as a spare part dispenser or for reconstructionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized swivel bending machine make FASTI type 2095/10/4Machine -No: 91295055 built in 1991Technical specifications:Usable length: 1020 mmmax.sheet thickness: 4.0 mmStroke of the upper beam: 350 mmAdjustability of the lower and bending beam: 80 mmMotor power bending / upper beam: 2.2 / 1.5 kWWeight approx: 1420 kgExternal dimensions approx .: 2113 x 900 x 1500 mmWith- foot switch- Operating modes: individual switching for each work step Automatic operation for a complete work cycle- Bending angle adjustment via digital display- Tear stopATTENTION: The bending beam is torn in 2 external places: and professionally welded.usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. Wald ...

Motorized swivel bending machine make FASTI type 212 30/4Year of construction 1980Technical specifications:max.working length: 3040 mmmax.sheet thickness: 4.0 mmOpening width of the upper beam: 350 mmAdjustability of the bending and lower beam: 80 mmBending angle preselection: 0 - 180 °:Drive power upper beam: 4.0 kWDrive power bending beam: 7.5 kWWeight approx: 6500 kgExternal dimensions approx. (Without back gauge): 4500 x 1200 x 1800 mmWith- FASTIMATIK electronic control- 2-way goat tool- additional bending railsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Manual folding machine make FASTI type 206/5-20-2.0Machine -No: 7126061, built in 1971with additional motorized upper beam adjustmentTechnical specifications:max. working length: 2040 mmMax. sheet thickness: 2.0 mmStroke of the upper beam: 200 mmAdjustability of the lower and bending beam: 80 mmWeight approx.: 1830 kgWith- counterweight- motorized upper beam adjustment (without function)- foot switchusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Key data: 2040 , 2

Motorized swivel bending machine Manufacturer Fasti Type 2095-20-2 Sheet power 2040 x 2 mm at 400 N/mm2 Digital display of the bending angle Foot pedal Notaus Power connection 400V

sheet width: 2040 mm plate thickness: 3 mm daylight upper clamping: 350 mm bending angle max.: 0-135 ° adjustment of lower and bend clamping: 80 mm control: Fastimatic M200 power requirement: 2,2/1,5 kW weight of the machine ca.: 2460 kg dimensions of the machine ca.: 3,2 x 2,8 x 2,1 m Condition: ready for operation: Condition: very good: CE signed: Electric 400 Volt: CNC-control with screen: Mot. back gauge: 1000 mm Foot switch: Motorized machine with motorized bending beam adjustment for setting the sheet thickness, screen control Fastimatic M200 (DELEM FM 200 B) for controlling the top cheek stroke, the bending angle and the back gauge with max. 30 working steps, emergency stop switch with magnetic holder, back gauge with ball screw spindles, CE mark. The bending performance refers to sheets of strength of 400 N / mm². Please notice that the price of a new CNC-machine in this  ...

sheet width: 2.100 mm plate thickness: 3 mm distance between columns: 2.100 mm weight of the machine ca.: 3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - working width 2540 mm - max. cutting capacity St 40 4 mm - mot. Cutting angle adjustment - Cut gap. by scaled adjustment screws - Number of hydraulic holders 14 pcs - Mot. backgauge with positioning. 10 - 1000 mm - Stroke rate depending on cutting angle and cutting length 23 per min - Hydraulic drive 400 V / 7.5 kW - Table height 1030 mm - Space requirement approx. W 2500 x H 1630 x D 2150 mm - Weight approx. 3600 kg - with: - Sheet metal holding pneum. supported - front angle stop + support arms - Electronic cutting depth adjustment - Cut line lighting - E-foot switch

sheet thickness: 1.25 mm steel Roller center distance: 63 mm

cutting length: 1030 mm sheet thickness: 2.5 mm steel Motor-adjustable backgauge up to 1,000 mm in 2 speeds with digital display Pneumatic sheet metal holding up Side stop and table extension Knife sharpened Weight approx. 1000 kg

Sheet thickness: 10,00 mm void: 0 Table length: 2000 mm Table width: 0 mm Knife length: 0 mm MACH-id       517 MAKE            Fasti        TYPE              528 20/10 YOP               2003 SPECIFICATIONS Cutting lenght      2000 mm Maximum sheet thickness      10 mm Backgauge stroke X in mm        1000 mm Power resonator  kW / Amp      15 kW DIMENSIONS Length         2800 mm Width           2625 mm Height         2080 mm

Sheet thickness: 4,00 mm Folding length: 3200 mm Depth rear gauge: 0 mm CNC Brand: Delem CNC Model: DA 65 MACH-id   5164 MAKE        Fasti Schroder Germany TYPE          215 - 32- 4 YOP            1998 SPECIFICATIONS Control     Delem DA 65 Pressbrake / Folding / Mech. / Hydr.     Folding machine Hydraulic     Hydraulic / Mechanical      Hydraulic Bending length    3200 mm Stroke      350 mm Die height       80 mm Power      7 .5 Kw DIMENSIONS Length       4000 mm Width         3000 mm Height        2000 mm

Sheet thickness: 5,00 mm Folding length: 2540 mm Depth rear gauge: 0 mm CNC Brand: Fasti CNC Model: Matik CNC MACH-id  3495 MAKE   FastiTYPE   215 - 25 - 05 YEAR   SPECIFICATIONS   Controll Fasti Matik CNC Pressbrake / Folding / Mech. / Hydr.  Folding Machine   Hydraulic / Mechanical   Hydraulic Bending length   2.540 mm Press force  5 mm    

Sheet thickness: 6,00 mm Folding length: 2040 mm Depth rear gauge: 600 mm MACH-id  3471 MAKE   Fasti Germany TYPE   212 - 20 / 6 YEAR  2002 SPECIFICATIONS Pressbrake / Folding / Mech. / Hydr   .Folding machine Bending length  2040 mm Press force   6 mm Ton Stroke  350 mm upper beam mm Backgauge stroke X in mm  0 - 600 mm Power  7.5 kW

sheet width: 2035 mm plate thickness: 6 mm distance between columns: 2000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m motorized limit stop behind foot switch Technische Daten / technical details: Schnittleistung (Blechdicke) / max. cutting capacity (thickness of sheet) 6 mm Schnittlänge / max. cutting length 2035 mm Hinteranschlag / arrester behind 1000 mm Ständerweite / distance between columns 2000 Mm Antriebsleistung / drive capacity 11 kW Gewicht der Maschine / weight 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sheet thickness: 4,5 mm Bending length: 1270 mm Number of rolls: 3   A-Symetric rolls 700 N/mm2 Conical bending attachment Upper rolll swivabel Central lubrication   Rolling width:                 1270mm Rolling thickness 5x toproll Ø:4,5mm Rolling thickness prebending:  4,5mm Top Roll Ø:                    130mm Bottom Roll Ø:                 130mm Side roll Ø:                   130mm Number of rolls:               3 Rolling speed:                 6 M/Min Power:                         2,2kW Height:    &nb ...

Working width: 1630mm, max. sheet steel thickness at 400N/mm² tensile strength: 2mm, power: 4kW, machine dimensions X/Y/Z: approx. 2500mm/1600mm/1600mm, weight: approx. 2500kg. The blade of the machine is worn. An on-site inspection is possible.

working width 2040 mm sheet thickness at 40 kp/mm² 4 mm Manual backgauge up to 600 mm Connected load 7.6 kW Machine weight approx. 3 t Dimensions L/W/H approx. 3.3 m / 1.4 m / 1.8 m Accessories: Bending tool with radii 3 mm, 6 mm, 7.5 mm, 10 mm

Motorized beading machine make FASTI type 401 45 - 0.8Mach.-No.. 8341 106, built in 1983Roller center distance: 45 mmMax. Sheet thickness: 0.8 mmgr. projection: 180 mmWorking depth: 185 mmDimensions L x W x H approx: 200 x 500 x 600 mmWeight: 22 kgWith- Motor drive 0.25 kW- Underframe- FootswitchThe machine is originally hand-operated and was built on its ownMotor drive rebuiltused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools