used ERCOLINA MB

: R10-R260 : 210 ° bending speed: 2 U/min : 1 1/4 x 3,5 mm : einphasig - 230 V drive motor: 1,1 kW : < 70 dB weight of the machine ca.: 80 kg dimensions of the machine ca.: 410 x 1000 x 570 mm Accessories / equipment: Hard copper and aluminum: 54x2 mm Steel tube: 42x3 mm Stainless steel: 42x2.5 mm Solid material: 30 mm Number of programs: 30 each 9 bends Control: Soft-touch control panel in 8 different languages Mobile by driving device The controller allows easy programming of the automatic cycle The controller is equipped with a system diagnostics and has a great language selection. Patented fast tool change system A single bending speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: R10-R260 : max. 210 ° : 54x2 mm : 42x2,5 mm : 42x3,5 mm : 30 mm bending speed: max. 4 U/min Amount of programms: 30x9 voltage: dreiphasig 220-400 V total power requirement: 1,1 kW dimensions of the machine ca.: 1000 x 410 x 570 mm weight of the machine ca.: 80 kg Accessories / equipment: - Machine structure: aluminum alloy - Base: welded steel - Standard accessories (including footswitch, operating instructions) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: R10-R260 bending speed: 2,5 U/min : 42x3 mm : 42x2,5 mm : 30 mm : 54x2 mm total power requirement: 1,5 kW weight of the machine ca.: 80 kg dimensions of the machine ca.: 410x1000x570 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 42,0 mm Stahl wall strength: 3,0 mm Stahl tube diameter: 54,0 mm CU/Alu wall strength: 2,0 mm bar material - diameter: 30,0 mm revolutions per minute: 2,0 U/min voltage: 400 Volt total power requirement: 1,1 kW weight: 80,0 kg range L-W-H: 410 x 1000 x 570 mm ERCOLINA MediBender MB 42 M - Capacity steel tube 42 x 3.0mm - Gas tube capacity 11/4 gas x 3.5 mm - Capacity square profile (FE 42) 35 x 35 x 3 mm - Max. bending radius 10-260 mm - Minimum radius 2 x D - Hex tool holder - Min. outer diameter 5 mm - 1/8 gas Furnishing : - Patented quick tool change system - a bending speed - free-moving footswitch including ERCOLINA microprocessor control: - with 30 programs (0 - 29) - Each program can be programmed with up to 9 bending angles - In addition, in the work mode for each bending angle necessary correction angle must be entered The data for this ad was created with Modu ...

Profile bending machine Ercolina Model TOP 030 - Three-phase 6 meters. With complete sets of rollers diam.20/25/30/35/35/35/43/50,8mm and 15/20/22mm hangers.

I - beam section - flat steel: 100 x 15 (d 500) mm I-beam section - upend: 50 x 10 (d 500) mm L-beam: 50 x 6.0 (d 600) mm round material: 35.0 (d 500) mm bar material dia. max.: 60 x 2.0 (d 1200 ) mm square material: 50x50x3 (d 1000) mm bending speed: 10.0 U/min roll diam. toproll: 165 mm bore: 40.0 mm range L-W-H: 560 x 1430 x 980 mm adjustment range:: OW 124 mm total power requirement: 1.85 kW weight: 273 kg ** from a chamber of crafts / little used (!!) ** Manufacturer new price including accessories approx. 12.500 euros ** Special price on request Furnishing: - electro-hydraulic ring/profile bending machine - heavy and robust machine body - 2x driven rollers (MR2 model series) - divided roller segments - digital position display of the top roller (0.1 mm) - manual top roller adjustment - R/L running of the bending rollers - Bending speed 20% higher than machines of the same class - S ...

ERCOLINA - Topbender / TB050 T -Technical data see data sheets -CE - Identifier -Foot switch -1x Tool + Slide Rail / R100 - 1-1/4G Dimensions: LxWxH 0.8x0.6x1.2 meters / Weight 200Kg Gfhd7Qtxv

ERCOLINA - TOP BENDER with tools -CE marking -Year of construction 2005 -Technical data see data sheets -Various tools including slide rails (installation) -Foot switch -Documentation Dimensions: LxWxH 0.8x0.6x1.2 meters / Weight 350 kg

Including various accessories

: 48x3,5 mm : 48x2,5 mm : 32 mm : 64x2 mm bending speed: 2 U/min : R10-R300 total power requirement: 1,5 kW weight of the machine ca.: 110 kg dimensions of the machine ca.: 410x1000x570 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 63x4,2 mm external diameter: min. Ø 5 mm bending radius min.: 10 mm bending radius max.: 270 mm Bending Angle: max. 210 ° bending device: gegen Uhrzeigersinn total power requirement: 0,75 kW weight of the machine ca.: 130 kg dimensions of the machine ca.: 740x470x1030 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 60x3 mm : 60x2,5 mm : 35 mm : 64x4 mm : R10-R300 bending speed: 2 U/min total power requirement: 1,5 kW weight of the machine ca.: 130 kg dimensions of the machine ca.: 595x363x900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 33,7 x 3,4 GAS mm tube diameter: 35,0 x 2,5 STAHL mm bending radius min.: R10 - R 190 mm tube diameter: 35,0 x 1,5 EDELST mm bending angle max.: 0 - 180 ° tool taper: 6-kant 40 mm voltage: 230 V total power requirement: 0,9 kW weight of the machine ca.: 23,0 kg Description : - MediBender 070 digital - with maximum bending power steel tube 35 x 2.5 mm - Excellent bending quality with very tight bending radii (from 2 x tube Ø) & Bending angles between 0 ° to 180 ° - Easy handling - High accuracy and reliability - Quick tool change (within a few seconds) - Easy to transport - A huge selection of inexpensive standard tools (metric, gas inch, inch) ** Bending segments available for an extra charge * STAHL bending segment R-82 G-1 ... 308 euros * SLIDING SHOE brass 1 gas = 33.7mm ... 93 euros The data for this ad was created with ModulMWS - the software solution of LogoTe ...

tube diameter: 2 x 3,91 mm ST tube diameter: 60 x 4,5 mm GAS revolutions per minute: 2,5 U/min radius: min. 2 x D mm bar material - diameter: 35,0 mm total power requirement: 1,5 kW weight: 130 kg Furnishing: - mandrelless tube bending machine - mechan. Angle adjustment via dial - Tool holder: hexagonal 40 mm + 50 mm - Bending angle: 0 ° to 180 ° (max. 210 ° angle of rotation) - Bending radius: R10 to R270 mm - integrated chassis * Bending segments on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 60 mm wall strength: 3 mm bending radius min.: 2 x Rohr-Ø ÷ R200 mm bending angle: 0 - 180 ° gas tube pipelines: 2 (60.,3mm) mm speed: stufenlos 0,5 - 2,0 total power requirement: 1,5 kW weight of the machine ca.: 0,7 t - Powerful mandrel bending machine up to 2 gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 60x3 mm : 60x2,5 mm : 35 mm : 64x4 mm : R10-R300 bending speed: 2 U/min total power requirement: 1,5 kW weight of the machine ca.: 130 kg dimensions of the machine ca.: 595x363x900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Can work in horizontal and vertical positions 3 driven rolls digital readout hydraulic stroke of upper roll: 170 mm Type: 3 driven rolls Dia rolls: 245 mm Dia of die mandrel: 70 mm Rotationspeed: 6 rpm Motorpower: 6,5 kW Length : 1000 mm Depth: 1500 mm Height: 1250 mm Weight: 1,5 ton

tube diameter: 42 x 3,0 mm ST : 210 Grad bending radius min.: R 10 mm bending radius max.: R 260 mm speed: 1,7 und 3,4 U/min total power requirement: 1,5 kW weight: 200 kg range L-W-H: 2,0 x 0,75 x 1,05 mm Pipe bending machine Microprocessor control with program memory Incl. tools for pipe diameters: 15, 20, 22 and 30mm Incl. work table 2000 x 610 x 1040mm See pictures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Italien : 39500 € : 801.85 € : 127 mm : 850 mm : 1200 mm : 850 mm : 720 kg : 80 cm³ : 127 x 7,1 mm : 4 x 8,56 mm : 127 x 7,1 mm : 114,3 x 5,6 mm : 114,3 x 5,6 mm : 139,7 x 8,8 mm : 139,7 x 8,8 mm : 64 x 6 mm : 88,9 x 3,65 mm : 50 x 4 mm : 90 mm : 130 x 25 stehend, 130 x 6 mm : 700 mm : 36 mm : 10 mm : 0 - 0,75 U/min : 3.5 kW digital read out for bending angle 4 hexagonal tool holders (40, 50 80 and 110 mm) Possibility to bend left and right Users manaul The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Italien : 106340 € : 2116.17 € : 150 mm : 1000 mm : 1900 mm : 1475 mm : 2700 kg : 170 cm³ : 150 x 7,1 mm : 6 x 7,11 mm : 150 x 9 mm : 141,3 x 6,55 mm : 141,3 x 6,55 mm : 168,3 x 9 mm : 168,3 x 9 mm : 64 x 6 mm : 88,9 x 3,65 mm : 110 mm : 150 x 45 stehend, 150 x 6 mm : 800 mm : 100 mm : 10 mm : 1 U/min : 15 kW TCPlus Control with 7“ Touchscreen Programmable bending speed for each individual bend Possibility to bend left and right Users manaul The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Wochen ab Auftragse : Italien : 9340 € : 193.34 € : 48 mm : 570 mm : 410 mm : 1000 mm : 110 kg : 6 cm³ : 48 x 3,5 mm : 11/2 x 3.68 mm : 54 x 1,5 mm : 50 x 4 mm : 48 x 2 mm : 48 x 2 mm : 60 x 3 mm : 64 x 2 mm : 64 x 2 mm : 60 x 2 mm : 50 x 4 mm : 32 mm : 45 x 16 stehend, 45 x 25 mm : 300 mm : 10 mm : 10 mm : 2/3 U/min : 1.5 kW 3 phase digital display of bend material spring back compensation quick-change tooling system 2 hexagonal tool holders accurate counterbending die positioning portable with base wheels footswitch users manual ALTERNATIVELY ALSO AVAILABLE AS FOLOWING MODEL (PRICE ON REQUEST): SB 48M (single phase, 2 r/min) Model with TCPlus control on request MACHINE-KIT WITH TOOLS (PRICES ON REQUEST): Art.Nr. maschine tube radius SB 48M K2D SB 48M Gas inch 2 x Ø SB 48T K2D SB 48T Gas inch 2 x Ø tools: Ø 1/2", (21,3 mm), R46 Ø 3/4", (26,9 mm), R56 Ø  ...

: neu : ca. 8 Wochen ab Auftragse : Italien : 29100 € : 590.73 € : 100 mm : 500 mm : 1200 mm : 850 mm : 480 kg : 43 cm³ : 100 x 6 mm : 3 1/2 x 4 mm : 100 x 6 mm : 100 x 3,6 mm : 100 x 3,6 mm : 114,3 x 6,3 mm : 114,3 x 6,3 mm : 114,4 x 6,3 mm : 88,9 x 3,65 mm : 100 x 5 mm : 70 mm : 100 x 25 stehend, 100 x 5 mm : 400 mm : 36 mm : 10 mm : 0 - 1,3 U/min : 3.5 kW quick-change tooling system digital display of bend material spring back compensation remote control of bend, return and emergency stop functions accurate counterbending die positioning footswitch 3 hexagonal tool holders heavy-duty steel gear case users manaul The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Italien : 12460 € : 255.43 € : 60 mm : 500 mm : 760 mm : 1000 mm : 186 kg : 10 cm³ : 60 x 4 mm : 2 x 3,91 mm : 60 x 4 mm : 60 x 2 mm : 60 x 3 mm : 60 x 6 mm : 64 x 6 mm : 64 x 6 mm : 63 x 4 mm : 50 x 4 mm : 35 mm : 35 x 35 mm : 60 x 20 stehend, 60 x 35 mm : 380 mm : 10 mm : 10 mm : 1,5 / 3 U/min : 1.5 kW quick-change tooling system digital display of bending angle material spring back compensation foot pedal for hands-free operation accurate counterbending die positioning users manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 9721 : prompt, Zwischenverkauf v : Italien : 7780 € : 161.05 € : 1 : 1 : 42 mm : 400 mm : 570 mm : 1000 mm : 80 kg : 4 cm³ : 42 x 3 mm : 48 x 1,5 mm : 42 x 4 mm : 42 x 2 mm : 42 x 2 mm : 50 x 3 mm : 54 x 2 mm : 54 x 2 mm : 60 x 2 mm : 50 x 4 mm : 30 mm : 40x20 (liegend), 40x12 (s mm : 260 mm : 10 mm : 3,3 U/min : 1.1 kW manual clamping electronic preselection of bending angle digital read our for Clamping position 30 programms with each 9 bends material spring back compensation overload protection mobile by rolls and handle foot pedal alternatively also available as folowing models (prices on request): MB 42M (single phase, 2 U/min) MB 42PM (portable, single phase, 2 U/min) IMMEDIATELY AVAILABLE DEMO-TOOLS: Brass die 1 1/4“gas (42,25mm) € 170,-- castiron former 1 1/4“gas (42,25mm) R112 € 420,-- MASCHINE-KIT WITH TOOLS (PRICES ON REQUEST): Time of delivery ap ...

: neu : ca. 8 Wochen ab Auftragse : Italien : 14020 € : 287.41 € : 76 mm : 370 mm : 680 mm : 910 mm : 193 kg : 15 cm³ : 76 x 3 mm : 2 x 5,4 mm : 76 x 3 mm : 70 x 4 mm : 76 x 1,6 mm : 76 x 4 mm : 76 x 6 mm : 76 x 6 mm : 76,3 x 3,25 mm : 50 x 4 mm : 45 mm : 75 x 15 stehend, 75 x 30 mm : 380 mm : 10 mm : 10 mm : 1/2 U/min : 3.5 kW digital display of bend material spring back compensation quick-change tooling system 2 hexagonal tool holders (40 and 50 mm accurate counterbending die positioning foot pedal users manual MASCHINE-KIT WITH TOOLS (PRICES ON REQUEST): Art.No. machine tube radius MG 030V2T K2D MG 030V2T gas inch 2 x Ø tools: Ø 1/2", (21,3 mm), R46 Ø 3/4", (26,9 mm), R56 Ø 1", (33,7 mm), R67 Ø 1", 1/4 (42,25 mm), R90 Ø 1", 1/2 (48,25 mm), R100 Ø 2", (60,3mm), R150 Art.No. machine tube radius MG 030V2T K3D MG 030V2T gas inch 3 x Ø tools: Ø 1/2&q ...