used ELB SW

ELB SHLIFF SWBD-30 VA II surface grinding machine was manufactured in 1970 in Germany. The machine is equipped with an electromagnetic table consisting of three electromagnetic clamping plates, each 3000 mm long and 450 mm wide. It is possible to process workpieces on the work table of the magnetic grinder with a length of up to 3000 mm, width of up to 500 mm and maximum weight of 2000 kg. The grinding height depends on the grinding wheel wear – with a new grinding wheel it is possible to grind the workpiece with a maximum height of 450 mm, while with the used grinding wheel the grinding height is 540 mm. Grinding machine ELB SHLIFF SWBD 30 has also a mandrel for balancing grinding wheels, holders for grinding wheels and electro-automatic magnetic pole switch in electromagnetic plates. The machine underwent a complete overhaul carried out in 2002 by the Polish company JOTES. Tech ...

Two ELB surface grinders and a Knuth stationary belt grinder are available. 1) ELB sanding SW4/2VA, year of manufacture: 1972, sanding range X/Y: 300mm/150mm, table dimensions X/Y: 820mm/210mm, sanding length/width: 1200mm/210mm, magnet dimensions X/Y: 1200mm/900mm, sanding wheel diameter: 200mm. Dimensions X/Y/Z: approx. 1500mm/1400mm/2000mm, weight: approx. 3400kg. 2) Elb sanding. 3) Knuth MB2000. On-site inspection is possible.

Horizontal grinding machine ELB, magnet 500/350 mm, table 840/350 mm, mesh. No. 140030676

Overhaul, retrofit, control conversion of all ELB-Schliff grinders with Granitan machine bed. Available with or without enclosure.

Surface grinders - horizontal ELB-SCHLIFF SWBE 10 PLC Second-hand machine Mint Control cabinet, motors, wiring, control new Hydraulic new, trim, loop length: 1000 mm Grinding width: 500 (600) mm Workpiece height: 600 mm Table size: 1000 x 550 mm Grinding wheel dimensions: 400 x 100 mm Grinding spindle motor: 11 kW Table speed: 2-30 m / min Grinding wheel speed: 5-35 m / sn Total power: 18 kW Machine weight approx.: 5,5 t Space requirement approx.: 3.5 x 2.5 x 2.5 m General outrun 2019 with 12 month warranty Paper machine Levelling feet Installation included Instruction includes

Code 0776 Description Surface grinding machine Make ELB Type SWBD 030 MCNC82 Machine No. 18.346.0383 Manufacturing date 1983 Control MCNC / 82-PC Tablesize 3520 x 600 mm Table grinding size L x B x H 3000 x 600 x 600 mm Magnetical plate size L x B 3000 x 400 mm Speed table movement 0,2 – 6 m/min. Max. distance table – centre grinding wheel 850 mm Speeds vertical 3 – 375 mm/min. Speeds cross 1,2 m/min. Speeds grindingwheel stepless 750 – 1400 omw/min Grindingstone: Ø 600 x Wide:100 x Bore: 200 mm Weight 18.000 kg Motor power 37 kW – 380 Volt Accessoiries Electro table 3000 x 400 mm Grinding unit with water cooling Filtering unit with paperfilter Profile grinding unit Condition Machine is in very good condition

Surface grinding machine make ELB type SWN 6 MC-KMachine -No: 189280484, built in 1984Grinding length: 600 mmGrinding width: 375 mmWorkpiece height: 375 mmTable length: 997.5 mmTable width: 375 mmMax. Workpiece weight: 300 kgAutom. Cross feed adjustable: 60 mm / strokeVertical feed, 1 graduation: 0.001 - 0.06 mmGrinding wheel diameter: 300 mmGrinding wheel width: 50 mmGrinding wheel bore diameter: 76.2 mmConnection voltage: 380VGrinding spindle motor: 3.7 / 4.5 kWTotal power requirement: 9 kWMachine weight approx: 3.5 tonsOutside dimensions approx: 2200 x 2000 x 2400 mmWith- mot. autom. trainer- Digital display for longitudinal u.- transverse axisused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always av ...

Manufacturer: ELB Type: SWN 6 VA2 Year of construction: 1982 Grinding length: 600 mm Grinding width: 320 mm Workpiece height: 525 mm Table clamping surface: 600x300 mm Magnetic plate: 600x300 mm Machine dimensions: 2600x1500x2000 mm Machine weight: ca. 2t

BRAND: ELB SCHLIFF YEAR: 1970 MODEL: SWBD-30 VA II APPLICATION TYPE: GRINDING LOCATION: POLAND MACHINE TYPE: GRINDING MACHINES AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 9000 MM MEASUREMENTS DEPTH: 2450 MM MEASUREMENTS HEIGHT: 2700 MM MACHINE WEIGHT: 12500 KG TABLE TABLE LOAD: 2000 KG Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - ELECTROMAGNETIC TABLE DIMENSIONS (W X L): 450 X 3000 MM - MAX GRINDING LENGTH: 3000 MM - MAX GRINDING WIDTH: 500 MM - MAX GRINDING HEIGHT WITH NEW GRINDING WHEEL: 450 MM - MAX GRINDING HEIGHT WITH WORN GRINDING WHEEL: 540 MM - AREA OF ELECTROMAGNETIC CLAMPING PLATES: 1000 X 450 MM - NUMBER OF ELECTROMAGNETIC CLAMPING PLATES: 3 PCS. - DIMENSIONS OF GRINDING WHEELS: ⌀ 450 X 203 X 80 MM - VERTICAL TRAVEL OF HEADSTOCK SLIDE: 465 MM - HORIZONTAL TRAVEL OF HEADSTOCK CO ...

grinding length:1000 mm grinding width:550 mm workpiece height:400 mm surface area:1300x450 mm cross feed motor:0,55 kW grinding wheel speeds:1400 U/min total power requirement:18 kW weight of the machine ca.:4800 kg Used / overhauled surface grinding machine, Make ELB, type SWBE 010 NCK, machine no. 163811079 Machine with automatic notification in all 3 axes. Overhaul scope: Machine completely dismantled, cleaned all the components thoroughly and checked for complete functionality. All guideways new eingeschabt on Neumaschinengeometrie. Wear parts replaced defective components reparariert or replaced. Reassembly, compl. Functional testing and internal loss. Machine repainted. Machine in perfect, produktionsbereitem state. Accessories: - Vertical feed with pre-selectable active digital display, direct measuring system Heidenhain - Electric magnetic chuck with straight coarse / fine pole  ...

Technical data Table length: 400 mm Table width: 200 mm Grinding length: 400 mm Grinding width: 200 mm Execution: hydraulic Max. distance from table to spindle-centreline: 400 mm Longitudinal travel (X-axis): 400 mm Transversal travel (y axis): 200 mm Vertical travel (z axis): 300 mm Table speeds: stepless from: 1 m/min up to: 25 m/min Diameter of grinding wheel: 250 mm Width of the grinding wheel: 25 mm Grinding wheel speeds: number (steps): 2 from: 1300 rpm up to: 2600 rpm Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 1250 kg Overall dimensions machine: Length: 1900 mm Width: 1300 mm Height: 2000 mm Various accessories: Coolant system Electrical magnetic chuck Length: 450 mm Width: 200 mm Wheel trueing attachment Set of flanges Central lubrification Automatic forward feed Automatic feed

Surface grinding machine

workpiece diameter: 600 mm workpiece weight: 400 kg workpiece height: 300 mm total power requirement: 35 kW weight of the machine ca.: 4500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Travel X/Y/Z 540/525/230 mm Coolant reservoir Balancing mandrel Grinding wheel holders

grinding length: 1500 mm grinding width: 900 mm workpiece height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 800 mm grinding width: 550 mm workpiece height: 870 mm total power requirement: 11 kW weight of the machine ca.: 6 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 600 mm grinding width: 320 mm workpiece height: 525 mm table surface area: 600x250 mm weight of the machine ca.: 2 t dimensions of the machine ca.: 2,6x1,5x2 m with magnetic clamping plate 600x250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Surface grinding machine, used, Grinding area: 450x200x250mm, with magnetic plate, puller, holders, coolant device, ...

Description: Serial number: 163881079, with CEBRAILLO CA magnetic clamping table, serial number: 23455, dimensions approx.: 450 x 200 mm weight approx.: 1,200 kg, Approx. Onsite Dimension. (l x w x h): 2,300 x 1,400 x 2,400 mm

Key data: 600 mm, 450 mm

Grinding length / width: 600 mm / 450 mm, transverse feed: 1 - 60 mm / stroke, table clamping surface: approx. 1,100 x 450 mm, magnetic clamping plate size 400x 600 mm, machine light, coolant device

The machine is in good technical condition, after agreement the possibility of testing. Grinding range, max. 600 mm. Table Ø / magnetic chuck Ø 600 mm. Workpiece - Swing Ø approx. 800 mm. Table speed, continuously adjustable 20 - 80 rpm. Max. grinding height above the table approx. 300 mm. Vertical movement of the grinding head 220 mm. Transverse movement of the grinding support 320 mm. Max. workpiece weight on the table 400 kg. Vertical feed, automatic 0.01 - 0.2 mm / stroke. Grinding spindle speed, continuously adjustable 1,000 - 2,400 rpm. Grinding wheel Ø, max. 400 x 120 x 76 mm Grinding spindle drive approx. 28 kW. Total electrical load 35 kW - 380 V - 50 Hz. Weight, approx. 4,500 kg.

Description: Design: hydraulic Max. distance from table to spindle centerline: 400 mm Longitudinal travel (X-axis): 400 mm Cross travel (Y-axis): 200 mm Vertical travel (Z-axis): 300 mm grinding length: 400 mm, grinding height: 200 mm, table surface area l x w : 400 x 200 mm, weight approx.: 1,500 kg, Approx. Onsite Dimension. (l x w x h): 1,700 x 1,800 x 2,000 mm

Table dimensions: 2000x500mm, magnet clamping plate dimensions: 2x 1000x400mm, weight: 7t, with documentation, rectifier system hand crank dresser, wet grinding device, paper belt filter, grinding wheel and grinding wheel holder, the machine needs to be overhauled.

Horizontal grinding optimum surface grinders ELB - 6375 ND - PLC Second-hand machine Surface grinders - horizontal ELB optimal 6375 ND - PLC Second-hand machine overhauled 2016 Surface grinders - horizontal ELB-SCHLIFF optimal 6375 ND - PLC Second-hand machine Grinding length: 600 mm Grinding width: 375 mm Workpiece height: 375 mm Table clamping surface: 600 x 350 mm Grinding wheel dimensions: 300 x 50 mm Grinding spindle motor: 4.7 kW Table speed: 2-30 m / min Grinding wheel speed: 1450 RPM Total power: 12kW Weight approximately: 3.5 t Space requirement approx.: 2.8 x 2.5 x 2.5 m Part overtaken 2016 + 12 months warranty, condition Control with touch screen new Paper machine Magnetic Chuck 600 x 350 Automatic table dressing with compensation 1 flange Items put up Installation / commissioning / transport

Surface grinders - horizontal ELB perfect BD 10 PLC Second-hand machine overhauled 2014 Surface grinders - horizontal ELB-SCHLIFF perfect BD 10 PLC Second-hand machine Grinding length: 1000 mm Grinding width: 600 mm Workpiece height: 600 mm Table size: 1000 x 600 mm Grinding wheel dimensions: 400 x 100 mm Grinding spindle motor: 11 kW Table speed: 2-30 m / min Grinding wheel speed: 0-35 m / s U/min Total power consumption: 35kW Machine weight approx.: 6 t Space requirement approx.: 3.8 x 2.5 x 2.5 m Part of 2014 overhauled with 12 month warranty Paper machine Magnetic clamping plate 1000 x 600 Automatic dressing device with compensation 1 flange Items put up