used EBU 75

Eccentric Press Brand Ebu Type EP15 Table size 400x430mm Max pressure 15 000kg Table height adjustment Table passage D160mm Stroke adjustment 4-70mm Ram bore 40mm Projection 200mm Max distance table-tappet 320mm Single/Duration Stroke Shield Flywheel D600mm 400V 1.0kW Machine weight ca. 870 kg The purchase price is net. Can be viewed and tested in our warehouse. Delivery is possible at an additional cost. All information without guarantee!

Capacity: 50 t Stroke: 1 mm Distance column/center (Throat): 1 mm Inclination degree: 1 mm Mechanical pressEBU - E50 MACH-ID 8844 Make: EBU Type: E50 Year: 1980 Capacity Kg:  50000 Table Length: 650mm Table Width:  500mm Hole in table:250mm Working height:380mm Stroke:       8 - 120mm Ram adjustment:70mm Strokes:      115Min. Length:       2100mm Width:        1800mm Height:       2400mm Weight:       3000kg

Capacity: 40 t Folding length: 650 mm (1) Down stroke / (2) Up stroke: 1   Mechanical pressEBU - H40 MACH-ID 8846 Make: EBU Type: H40 Year: 1996 Capacity Kg: 40000 Table Length:650mm Table Width: 460mm Hole in table:205mm Ram size:    435 x 240mm Throat:      230mm Stroke:      4 - 100mm Strokes:     130Min. Length:      1200mm Width:       1800mm Height:      1900mm Weight:      2400kg

Three eccentric presses with high pressing force are available. 1) Weingarten XKVII, year of manufacture: 1958, press force: 27t, max. sheet thickness: 3mm, stroke rate: 145/min, ram stroke: 6mm-76mm, ram adjustment: 48mm-13mm. 2) Ebu SOF, year of manufacture: 1976, press force: 50t, stroke: 120mm. 3) Siegfried Franzen 45AMP, year of manufacture: 1959, press force: 45t, throat depth: 230mm, stroke rate: 110/min, ram stroke: 0mm-80mm, ram adjustment: 55mm, engine power: 5.5hp. On-site inspection is possible.

Force of pressure: 75 t projection: 300 mm table size: 620 x 800 mm Durchfalloch in the table: 225 x 325 mm table adjustment: 175 mm plunger surface: 180 x 475 mm slide adjustment: 80 mm stroke adjustment: 16-140 mm stroke rate: 90 / min drive motor: 380 V, 3 kW space: 1700 x 1200 x 2500 mm weight: 3300 kg

pressure: 75 t throat: 310 mm stroke: 16-140 mm no. of strokes: 105 Hub/min ram - range of adjustment: 80 mm table surface area: 800x610 mm ram surface: 600x175 mm hole in the table: Ø 170 mm table height: 820 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 4 t dimensions of the machine ca.: 1500x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 275 mm stroke: 8-120 mm no. of strokes: 30-120 Hub/min ram - range of adjustment: 85 mm hole in the table: 220x100 mm table surface area: 750x540 mm ram surface: 400x260 mm table height: 820 mm tool hole in ram: Ø 50 mm total power requirement: 7,7 kW weight of the machine ca.: 5 t dimensions of the machine ca.: BxTxH 1500x2000x2450 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 325 mm stroke: 10-110 mm no. of strokes: 100 Hub/min ram - range of adjustment: 80 mm table surface area: 900x630 mm ram surface: 500x315 mm hole in the table: 325x225 mm table height: 800 mm tool hole in ram: Ø 50 mm dimensions: BxTxH mm weight of the machine ca.: 8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: ja weight of the machine ca.: 9,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Compressive force: 25 t Projection: 200 mm Table size: 450 x 600 mm Table adjustment: 240 mm Plunger adjustment: 70 mm Stroke adjustment: 4 - 80 mm Stroke rate: 150 rpm Drive motor: 380 V, 1.1 kW Space required: 1600 x 850 x 2000 mm Weight: approx. 1450 kg

Compressive force: 25 t Projection: 200 mm Table size: 450 x 600 mm Hole in the table: 100 x 210 mm Table adjustment: 240 mm Plunger adjustment: 70 mm Stroke adjustment: 4 - 80 mm Stroke rate: 150 rpm Drive motor: 380 V, 1.1 kW Space requirements: 1300 x 800 x 2000 mm Weight: approx. 1450 kg

pressure: 25 t throat: 200 mm stroke: 4 - 80 mm table surface area: 595 x 410 mm ram adjustment: 70 mm no. of strokes: 150 Hub/min table adjustable in height: 240 mm total power requirement: 1,1 kW weight of the machine ca.: 1,45 t dimensions of machine L x W x H: 1,30 x 0,80 x 2,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 340 mm stroke: 8-140 mm no. of strokes: 50 Hub/min ram - range of adjustment: 110 mm table surface area: 1000x700 mm ram surface: 650x450 mm hole in the table: Ø 180 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 10,5 t dimensions of the machine ca.: BxTxH 2300x1600x3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t throat: 270 mm stroke: 4-100 mm no. of strokes: 130 Hub/min ram - range of adjustment: 80 mm table surface area: 670x540 mm ram surface: 460x300 mm hole in the table: Ø 100 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 6 t dimensions of the machine ca.: BxTxH 1500x2300x3300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 300 mm stroke: 8-140 mm no. of strokes: 70 Hub/min ram - range of adjustment: 100 mm table surface area: 750x620 mm ram surface: 500x340 mm hole in the table: Ø 180 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 7,5 t dimensions of the machine ca.: BxTxH 2100x1500x3300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 320 mm material thickness: 8 mm no. of straightening rolls: 9 material cross-cut: 2000 mm² weight of the machine ca.: 4,2 t dimensions of the machine ca.: 2000x2000x2400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 75 t

Specifications: Capacity 75 tons Stroke rate 90 strokes Projection 300 mm Plunger stroke 16 - 140 mm Plunger adjustment 80 mm Table size approx. 800 x 600 mm Installation height max. approx. 400 mm

pressure: 80 t stroke: 8-140 mm no. of strokes: 105 Hub/min ram - range of adjustment: 100 mm table surface area: 900x625 mm ram surface: 600x280 mm hole in the table: Ø 150 mm table height: 1000 mm tool hole in ram: Ø 40 mm : 490 mm weight of the machine ca.: 7 t dimensions of the machine ca.: BxTxH 1800x2200x2600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Capacity 50 tons Stroke rates 115 rpm Projection 250 mm Plunger stroke 8 - 120 mm Plunger adjustment approx. 70 mm Table , WxD approx. 650 x 500 mm Diarrhoea och approx. 250 x 180 mm

pressure: 40 t throat: mm stroke: 4 - 100 mm ram adjustment: 85 mm no. of strokes: 65/130 Hub/min total power requirement: 1,1 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 t throat: 320 mm stroke: 8-140 mm no. of strokes: 30-120 Hub/min ram - range of adjustment: 100 mm table surface area: 900x620 mm ram surface: 600x320 mm hole in the table: 315x180 mm table height: 870 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 7,3 t dimensions of the machine ca.: BxTxH 1500x2000x2750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 t throat: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2 x 2 x 2,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 130 t throat: 350 mm stroke: 8-140 mm no. of strokes: 30-120 Hub/min ram - range of adjustment: 110 mm table surface area: 1000x680 mm ram surface: 650x470 mm hole in the table: 400x250 mm table height: 850 mm tool hole in ram: Ø50 mm weight of the machine ca.: 12 t dimensions of the machine ca.: 2000x2000x3500 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Order number P 5006069 , Ram adjustment 80 mm 50 strokes/min Power requirement 11 hp Max. pressing force: 125 to, stroke: 20 - 140 mm, table surface area l x w : 1000x650 mm, weight approx.: 12,000 kg, Approx. Onsite Dimension. (l x w x h): 2,200 x 1,000 x 2,800 mm

Description: Order number P 5006069 , Ram adjustment 80 mm 50 strokes/min Power requirement 11 hp Max. pressing force: 125 to, stroke: 20 - 140 mm, table surface area l x w : 1000x650 mm, weight approx.: 12,000 kg, Approx. Onsite Dimension. (l x w x h): 2,200 x 1,000 x 2,800 mm