used DOPPSTADT SM

ID3166 Doppstadt SM518 S year/Bauahr 1991 6220 hours (acc. Counter)/Hours (according to counter) Drum sieve, Mercedes-engine, brush new, almost new drum with 15 mm mesh size, Additional hydraulics for e.g. magnetic tape Drum screen, Mercedes engine, brush new, almost new drum with 15 mm mesh size, additional hydraulics for e.g. magnetic tape

USED TROMMEL FOR DOPPSTADT, KOMPTECH, TERRA SELECT AND SEKO IN READY DELIVERY: FOR T4 / T40: 10 mm SQUARE HOLE 6 mm THICKNESS (USED) 15 mm SQUARE HOLE 6 mm THICKNESS (USED) 15 mm SQUARE HOLE 6 mm THICKNESS (NEW) 20 mm SQUARE HOLE 8 mm THICKNESS (NEW) 25 mm SQUARE HOLE 8 mm THICKNESS (NEW) 30 mm SQUARE HOLE 8 mm THICKNESS (NEW) 35 mm SQUARE HOLE 8 mm THICKNESS (NEW) 40 mm SQUARE HOLE 8 mm THICKNESS (NEW) 50 mm SQUARE HOLE 8 mm THICKNESS (NEW) 80 mm SQUARE HOLE 8 mm THICKNESS (NEW) FOR SM 518 DOPPSTADT: 20 mm SQUARE HOLE 6 mm THICKNESS (USED & NEW)
30 mm SQUARE HOLE 8 mm THICKNESS (USED) 40 mm SQUARE HOLE 8 mm THICKNESS (NEW) 50 mm SQUARE HOLE 8 mm THICKNESS (USED) 50 mm SQUARE HOLE 8 mm THICKNESS (NEW) 80 mm CIRCLE HOLE 8 mm THICKNESS (NEW) FOR SM 618 DOPPSTADT: 10 mm SQUARE HOLE 6 mm THICKNESS (USED) 20x25 mm RECTANGULAR HOLE 8 mm THICKNESS (USED) FOR  ...

Doppstadt shredder with frame and discharge conveyor Type DW 3080 E1 year 2005 Hours of operation: approx. 9900 h 315 kW DC-motor: LAK 4250 C. Cutting system: roller length: 3000 mm Diameter: 800 mm Rotor speed: 0-30 1/min Roller teeth: 21 pieces, width: 131 mm height: 167 mm Crest length: 3500 mm The teeth of the comb: Width: 96 mm, number 22 Throughput up to 40 t / h depending on the material Total weight approx. 28 t Base with discharge conveyor: 8 tons Hydraulic power: 4 KW Dimensions: Lxwxh 6400 x 2500 x 2300 mm without stand Control Panel complete Operating instructions and CE here. Visit possible in Grafenwöhr

Doppstadt single-shaft shredder with base, discharge belt, control cabinet and wiring. Engine hours: approx. 17,635 h Drive power 315 kW DC motor: LAK 4250 C Cutting unit: Roller length: 2500 mm Diameter: 600 mm Rotor speed: 0-35 rpm Roller trough: 17 piece, width: 60 mm, height: 150 mm Combaenge: 2500 mm Combmzaehne: 18 pieces, Width: 60 mm Throughput up to approx. 30 t/h depending on the material Total weight approx. 23 t Base with discharge belt: approx. 5 t Hydraulic unit: 4 KW Dimensions: LxWxH 6400x2500x2300 mm without base Control cabinet Complete with wiring Operating instructions Visit possible in Grafenwoehr

Doppstadt single-shaft shredder with base, discharge belt, control cabinet and cabling. Operating hours: approx. 17,636 h Drive power 315 kW DC motor: LAK 4250 C Cutting unit: Roller length: 2500 mm Diameter: 600 mm Rotor speed: 0-35 1/min Roller fence: 17 pieces, width: 60 mm, height: 150 mm Comb length: 2500 mm Comb fence: 18 pieces, width: 60 mm Throughput Up to approx. 30 t/h depending on the material Total weight approx. 23 t Base with discharge belt: approx. 5 t Hydraulic power pack: 4 KW Dimensions: LxWxH 6400x2500x2300 mm without base Control cabinet Complete with cabling Instruction Manual: German Sightseeing possible in Grafenwoehr

Doppstadt AK 635 Compact - Built in 2013 - Hours 4839 - Permissible total weight 25,000 kg - Mercedes Benz diesel engine 635 hp at 2,000 rpm - AD BLUE - Load-dependent control of the material feed incl. automatic scraper floor reversal - Separate drive of feed roller and scraper floor (twin drive) - Fuel tank 750 litres - Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments - Auxiliary hydraulic connection 11 cm³ - Rear hinge: wheelbase 6,150 mm, - Scratching floor with 34 strips - Overbelt magnet -Radio remote control incl. transmitter, receiver, - Strainer basket Machine is overhauled and immediately available

Doppstadt DW 3060K Biopower Type F - Year of construction 11/2017 - Hours 4839 - Engine MTU 490 hp - AD BLUE - Track chassis - Weight 30,000 kg -Remote control - Humidification system - Tail conveyor 7m - Overbelt magnet Machine is overhauled and immediately available

Doppstadt DW 3060 Biopower Type F - Built in 2017 - Hours 6118 - Engine MTU 490 hp - AD BLUE - Weight 25,000 kg - 42 teeth -Remote control - Humidification system - Rear conveyor 5.5m - Overbelt magnet Machine is overhauled and immediately available

Screening drums suitable for all common screening machines such as Doppstadt SM 314 / SM414 / SM518 / SM618 / SM620 / SM720 / SM 725 Terra Select T4-T7, Komptech Maxx, Mustang, Nemus , Cribus , Pronar , Terex Neuenhauser and others - Manufactured according to your specifications: - Perforation (also variable within the drum) - Square or round perforation - offset or straight - smallest webs - welded-in spiral - in various material thicknesses - Perforated plates sharp-edged in the highest quality - Perforated plates made of special steel We deliver our drums free of charge. Many models in stock without waiting.

TECHNICAL SPECIFICATIONS Manufacturer: DOPPSTADT Designation: Solids separator Design: Semi-mobile, hook lift system Type: GT 130 A Year of construction: 2019 Release medium: water Adjustable incline: up to max. 23° Drive type: Hydraulic Weight: 9,000 kg Transport dimensions (length/width/height): 7,346 x 2,500 x 2,921 mm SPECIFIC COMMENT - Machine for separating mixtures of materials made of buoyant and non-buoyant materials by means of water - Low operating hours - Robust and low-wear design of the machine - Compact transport dimensions as well as easy transport by hook lift truck

Doppstadt DW 3060 Büffel - Year of construction 2012 - Running hours 5232 - Engine Mercedes Benz overhauled - AD Blue - Hydraulic drive (self drive) -Remote control - Overbelt magnet Machine is overhauled and immediately available

ID3253 Doppstadt AK510 K year/Year of construction 2014 approx. 5210 hours/hours 29 t Shredder Shredder

ID3259 Doppstadt DW2560 BK Bison year/Year of construction 2003 approx. 8130 hours/hours 28 t Wood shredder, screening system new approx. 1200 hours ago, gearbox overhauled and shaft replaced approx. 1200 hours ago Wood shredder, screening plant new approx. 1200 hours ago, gearbox overhauled and shaft renewed approx. 1200 hours ago

Air nozzle 110 mm with flexible hose 80 mm, total length approx. 890 mm, shaft-mounted holder for 20 mm pipe

Mobile wind sifters has 1,766 operating hours compressor Find more here - / Contact us at -

Pre-shredder for garbage, waste wood, green waste, roots, commercial waste etc., five travel drives, auxiliary hydraulics, SPECIAL FEATURE: Engine, hydraulic system and electrics new after fire damage, service and tools new or as good as new.

Builder: DOOPSTADT Model: SM 518 PROFI Engine: MERCEDES BENZ Power Engine: 41 kW (60 HP) Status: NOT OVERHAULED Year: 1990 (ca.) Screening System: TROMMEL L 4.700 mm X D 1.800 mm Weight: 13.000 kg

Description: Last registration number: none First registration: not previously registered for road use Inspection sticker: no inspection sticker in accordance with § 57 A Mileage: unknown Operating hours: CRT-C132387 Driving operation: 45 hours, Working operation: 34 hours, VIN: DT5208013 Unladen mass in kg min./max. 12,218 - 13,000 Total weight/technically permissible maximum mass: 18,000 kg Permissible axle load front: 7,200 kg, rear: 11,500 kg Length: 5,210 - 7.570, width: 2,600, height: 3,770 Drive type: Diesel Maximum speed: 40 km/h Displacement: 12,503 ccm Power: K385/2100 rpm Equipment: Hydraulic connections, fire extinguisher, incl. 7 books with operating instructions, circuit diagrams, etc., Controls: WEZEK, roof hatch, various control elements in the driver's area, swivel driver's seat, air suspension, ATTENTION excl. front mounted roller shown in the photo, this is not incl ...

SmartPick debagging robot for sale! Complete debagging system with plaƞorm holding up to 5 pallets (europallets), cleaning chamber, 2 hoppers, controlling unit with soŌware for recipe programming. The system is installed in our factory at Funen – Denmark. Technical specificaƟons: System capacity: Up to 180 bags/h Bag weight: 25 kg Bag dimensions: Max 700x500 mm Ambient temperature: 10°C ‐ 40°C Dew point: ‐10°C Building year: 2016 – the complete system is in very god condiƟon The machinery is in very good working condition and is still under power and in use SYSTEM DESCRIPTION “SmartPick” The proposed system provides for the installation of one articulated robots which can manage bag gripping from 5 pallets, cut contents and then empty into 2 hoppers. One cleaning station can optionally take care of cleaning the outer bags. The pallets are positioned by  ...

-reliably high load capacity across the entire beam length thanks to homogeneous web material -secured component load capacity, as all of the straps are machine stress graded and load-tested -consistent product characteristics owing to high dimensional stability -multiple savings compared to squared timber due to improved load capacity combined with lower weight -Certification EN 13377 -Produced in Austria from Doka Industrie The length of the H20 smart beam varies from 2,45m until 5,90m. Costs: 5,00 EUR/rm For more information or an appointment, you can contact me at any time. Phone: + 43 664 1296830 or Email:office@berger-international.at

We offer: Doka / Form-on smartPROPplus 20 550 new a 62.60€ / piece net Doka stacking rack 1.55 x 0.85m new 130.00€ ( 30 pcs in frame) Heavy load supports , galvanized DIN 1065 , at each extension length 20kn load -Load capacity min. 20 kN at each extension length (according to general building inspection approval Z-8.311-946) -Preservation of the value of the supports over many years thanks to high-quality production and galvanizing -fast and safe release of the clamped support due to optimized thread pitch -safe working thanks to squeezing and fail-to-back protection - They offer on 1 construction support ! If you have any questions, call Mr. Becker on 0176-700 44689 the sale and sale of scaffolding/formwork systems and construction machinery; Formwork restoration on fair terms. Company SFS Meisterbetrieb Andreas Becker e. Kfm., Tel. [07305-9562350],  ...

42 x SFS smart prop plus 20-350 new â 36,20EUR/St �1520,40 = NET 1 x Doka stacking rack new 130,00EUR Unlimited quantities / construction support also available separately Prices exclusive VAT and transport -Tragkraft min. 20 kN at any extended length (according to German approval Z 8,311 946) Maintaining the value of the supports for many years thanks to high-quality manufacturing and galvanizing -schnelles and safe release of the clamped support through optimized thread pitch European Community product, produced according to DIN 1065 tap-proof works thanks to crushing and resiliency issues like at 0049 176 70044689 Mr. Becker

Electric heating: 48 KW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: integrated indoor of the chamber, friction generator Smoking material: wood Without the after-burning system Installation dimensions of the machine in cm: Width: 160 Length: 250 Height: 250 Trolley dimensions in cm: 100*100*200 height Delivery time: 30 working days after advanced payment

Type: FESSMANN T 3000 3 trolleys Heating: steam Control panel: DP 11 Base width: 151 cm Base depth: 347 cm Corpus height: 250 cm Min. room height: 304 cm Recommended room height: 320 cm Smoke-trolley dimensions (HxWxD), cm: 198x104x102 Connected load for HP heating: 111 kW Smoke generator: RZ 550 Machine width: 55,0 cm Machine length: 115,0 cm Machine height: 159,0cm Rated power: 1,8 kW

Type: FESSMANN T 3000 3 trolleys Heating: steam Control panel: DP 11 Base width: 151 cm Base depth: 347 cm Corpus height: 250 cm Min. room height: 304 cm Recommended room height: 320 cm Smoke-trolley dimensions (HxWxD), cm: 198x104x102 Connected load for HP heating: 111 kW Smoke generator: RZ 550 Machine width: 55,0 cm Machine length: 115,0 cm Machine height: 159,0cm Rated power: 1,8 kW