used DUNKES HZ

Hydr. High-speed single-column press Fabr. DUNKES type HZS 40Machine -No: H 77-581, built in 1981Press force: 40 tOperating pressure: 270 barStroke: 150 mmInstallation height: 400 mmOutreach: 280 mmRapid traverse: 400 mm / sec.Rapid traverse to: 400 mm / sec.Pressing under full load: 14 mm / sec.Table height: 820 mmTable surface: 600 x 515 mmDiarrhea hole in the table: 100 mm Drm.Drive power: 7.5 kWWeight: 3.1 tOil filling: 230 lExternal dimensions: 850 x 1200 x 2390 mmWith- Cutting impact damping- Safety 2-hand control- self-holding with rapid traverse shutdown- Electric return stroke limitation- Setup tip circuit- Fully automatic workflow- Emergency stop switch- stepless force preselection- graduated Adj. mech. depth stop- Switching in the lower stroke rangexa0xa0xa0 Lift and time changeoverxa0xa0xa0 Lift and pressure changeover- separate hydraulics for drawing cushionsused, in good co ...

This Dunkes HZS 160 Bending machine was manufactured in the year 2008 and has 2250 production hours. The machine is in good condition and well maintained.

BRAND: DUNKES YEAR: 2008 MODEL: HZS 160 PRODUCTION HOURS: 2250 APPLICATION TYPE: BENDING LOCATION: GERMANY MACHINE TYPE: BENDING MACHINES AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MACHINE WEIGHT: 15000 KG Additional Information MACHINE BENEFITS QUALITATIVE MACHINE BENEFITS: - THE MACHINE IS IN GOOD CONDITION AND FULLY FUNCTIONAL

Technical data: -maximum pressing force 40 t -maximum piston stroke 218 mm -Height 410 mm -Projection up to mid slide 280 / 370 mm -Table size 650 x 520 mm -Plunger surface 500 x 400 mm -Stö�elboaufnahme DIN 810 50 mm -Work speed max.bis 226kN 39 mm / s -Min. working speed 21 mm / s -Eilabsenkgeschwindigkeit 428 mm / s -Rear hub speed min. / max. 100 / 420 mm / s -Table height above floor 820 mm -Oil quantity approx. 400 ltr -Drive 400 V / 15 kW -Space requirement approx. B 1400 x H 3200 X 2200 mm -Weight approx. 7000 kg -with: - hydr. PIN voltage -Control CNC 50 - separate control panel

pressure: 25 t throat: 250 mm stroke: 100 mm total power requirement: 7,5 kW weight of the machine ca.: 3200 kg dimensions of the machine ca.: 1000 x 1700 x 2600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 75 t throat: 280 mm stroke: 303 mm total power requirement: 15 kW weight of the machine ca.: 7000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure:2,5 t

Pressing force: 1250kN, closing speed: 450mm/s, working speed: 21mm/s, stroke length: 590mm, dry weight: 15000kg. The hydraulic press has a defect in the tool holder, they must be fixated with clamping claws. Documentation available. On-site inspection is possible.

pressure: 6,3 t throat: 300 mm stroke: 330 mm table hole: 60 mm ram hole: 25 mm dayligth: 600 mm table-size: 620 x 520 mm safety distance: 100 mm weight of the machine ca.: 1000 kg dimensions of the machine ca.: 2400 x 900 x 1800 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 6 t throat: 200 mm stroke: 200 mm total power requirement: 2,2 kW weight of the machine ca.: 0,78 t dimensions of the machine ca.: - m Hydraulic Press 63 kN Stroke 200 mm, Throat 200 mm, feed rate: down 165 (28) mm/s, up 510 mm/s. Wheight 780 kg. Workspace: Table 450 x 380 Drive: 2.2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 75 t

Fast Runner - Force: 75 kN - Stroke: 150 mm - Installation height: 500 mm - Projection: 330 mm - Express lowering speed: 400 mm/s - Working speed from partial load: 40 mm/s - Working speed at full load: 18 mm/s - Return stroke speed: 400 mm/s - Drive power: 22 kW - Diarrhea hole in the table: 250 x 180 mm - Breakthrough press frame to the rear: 300 x 200 mm - Table height above floor: 820 mm - Dimensions LxWxH: 1600 x 1500 x 3000 mm - Weight: 8,900 kg

Fast Runner - Force: 75 kN - Stroke: 150 mm - Installation height: 500 mm - Projection: 330 mm - Express lowering speed: 400 mm/s - Working speed from partial load: 40 mm/s - Working speed at full load: 18 mm/s - Return stroke speed: 400 mm/s - Drive power: 22 kW - Diarrhea hole in the table: 250 x 180 mm - Breakthrough press frame to the rear: 300 x 200 mm - Table height above floor: 820 mm - Dimensions LxWxH: 1600 x 1500 x 3000 mm - Weight: 8,900 kg

pressure:160 t throat:370 mm stroke:150 mm total power requirement:45 kW weight of the machine ca.:22 t dimensions of the machine ca.:2,75 x 1,85 x x 4,80 m rules for accident prevention:Vorhanden work table::1500 x 700 mm Documents:vorhanden

pressure:160 t throat:370 mm stroke:150 mm distance table/ram, max. stroke up, adjustment up:500 mm table surface area:1000 x 700 mm hole in the table:100 mm table height over floor:820 mm ram surface:600 x 520 mm speed down:350 mm/s speed up:350 mm/s working speed:12 - 36 mm/s oil volume:1100 l power requirement:27,0 kW weight:16,5 t dimensions (WxDxH):1,8 x 2,7 x 3,95 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 depth stop:motoric adjustable

Press capacity: 250 ton Throat depth: 430 mm Stroke: 300 mm Daylight: 500 mm Table surface area : 1.100 x 850 mm Slide area: 1.100 x 850 Table height over floor: 950 mm Approach speed: 330 mm / sec Working speed: 11 - 30 mm / sec Return speed: 330 mm / sec Die cushion capacity in table: 80 ton Die cushion stroke: 100 mm Ejector in ram: 5 ton Ejector stroke in ram: 75 mm Required power: 40 kW Oil volume: 1.400 l Dimensions L x W x H: 3.200 x 2.500 x 4.250 mm Weight of machine approx.: 25 ton

Dunkes DNA 2 Pneumatic riveting units Dunkes DNA 2 Pneumatic riveting units 20 kN 0.55 kW More items - new and used - can be found in our shop! International shipping costs on request!

Reference No. 00762 Name of the plant Press Manufacturer: Dunkes Maschinenbau Kirchheim / Teck Model H2 – 63 Year of manufacture: unknown Pressing force 63 Mp Oil pressure max 315 atm Engine power 11 kW Version DUNKES Z-CUSHION is a very large version but has a small defect in the electronics (repair is estimated at 300-500 euros - switch version should be replaced

pressure: 10 t throat: 0 mm stroke: 400 mm total power requirement: 7,5 kW weight of the machine ca.: 6500 t dimensions of the machine ca.: m D U N K E S (Germany) CNC Controlled Hydraulic Double Column Press Model HD 10 Year 1993 ________________________________________________________ Pressure 10 tons Ram stroke 400 mm Mounting height 600 mm Table size 400 x 300 mm Table height above floor 820 mm Ram area 400 x 300 mm Ram bore 40 mm Quickspeed, downwards, max. 70 mm/s Working speed, downwards, using max. pressure 40 mm/s Working speed, min. 5 mm/s Working speed adjustable from 5 - 70 mm/s Return stroke speed, min./max. 20 / 175 mm/s Drive 7.5 kW Total electrical load, approx. 12 kW - 380 V - 50 Hz Weigh ...

Crimping force at 12 bar: 8 to Pressure to 4 bar: 4 Table size 280 x 280 mm Height 350 mm RADIUS 160 mm Weight 350 kg W x D x H approx. 0.5 x 0.75 x 2,15 m -Stroke adjustment with fine Skallierung: 0.02 mm -Anti-rotation -pneumatic foot switch

Pressing force 160kN,pull cushion force 63kN,stoesselstroke 300 mm, pull-cushion stroke 150 mm, recessed height 500 mm, table 630x400,Stoessel 300x250,pull cushion flap 350x270,

Pressing force: 160 kN Impact stroke: 100 mm Mounting height: 350 mm Hole in the table: 100 mm Pushhole bore: 32 mm Stand passage: 650 mm Table size: 630 x 400 mm Hydraulic pressure: 280 bar electr. Connection: 380 V, 5.5 kW Space requirement: 1550 x 1050 x 2400 mm Weight approx.: 3 t

pressure: 63 t stroke: 650 mm throat: 380 mm table surface area: 650 x 1000 mm ram surface: 650 x 1000 mm dayligth: 850 mm die cushion stroke: 220 mm die cushion area: 500 x 520 mm die cushion capacity: 25 t ram stroke speed - under load: Vorlauf 400 mm/sec ram stroke speed: Rücklauf 330 mm/sec drawing speed: Auf 220 mm/sec drawing speed: Ab 300 mm/sec working height (floor - top of table): 1050 mm total power requirement: 18,5 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 1,2 x 2,2 x 3,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 380 mm stroke: 400 mm power capacity: 22 kW dayligth: 600 mm ram surface: 600x500 mm table surface area: 720x600 mm weight of the machine ca.: 9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t distance between columns: 650 mm stroke: 200 mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 t distance between columns: 1050 mm stroke: 250 mm total power requirement: 40 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.