used DOOSAN Lynx

Doosan LYNX 2100 LYB CNC Lathe Max. Turning Diameter 300 mm Max. Turning Length 510 mm Fanuc control unit Machine is in excellent condition 8 & 10 inch C / Y Machine has been installed March 2023 Low working hour Only aluminium has been done on the machine

DOOSAN LYNX 2100 LMA CNC turning center was manufactured in 2021 in South Korea. The machine offers best-in-class turning performance and precision, thanks to a wide design, a highly stable bed, a low-vibration spindle and a full guide guard that protects against coolant leaks and chips from entering into the machine. All this makes the DOOSAN LYNX 2100LMA CNC lathe ideal for any industrial facility where quality and precision are top priorities. The used spindle is driven by a reliable electric motor with high power, which is used for the versatile use of tools taken from the 12-position headstock. The turret, on the other hand, is controlled by a powerful servomotor which guarantees fast and accurate tool choice. All machining parameters are programmed in the intuitive DOOSAN FANUC i Series CNC control with many useful features, whose excellent optimisation allows maximising machini ...

2018 DOOSAN LYNX 220 LSYC CNC latheType: LYNX 220 LSYCManufacturer: DOOSANYear: 2018Control: DOOSAN FANUC-iTotal number of hours: 880 hoursMaximum turning length: 510 mmMax. turning diameter: 300 mmTurning diameter above the bed (max): 600 mmDiameter of rotation over the transverse slide (max): 400 mmControlled axes: X/Z/Y/C1/C2/BMaximum travel length in the X axis: 205 mmMaximum feed speed in the Z axis: 560 mmY axis: 105 mmC1/C2 axis: 360Maximum power of the main spindle: 15 kWSpindle bore diameter: 76 mmMinimum revolutions of the main spindle: 45 1/minMaximum spindle speed: 4500 1/minWorkpiece weight: 300 kgMaximum travel length in the B axis: 560 mmMax. rod material passage: 65 mmLength: 2880 mmWidth: 1710 mmHeight: 1920 mmWeight: 4200 kgEquipment:Bar feeder SS 2500Chip conveyor Find more here - / Contact us at -

This 3-axis Doosan Lynx 2100LMB lathe was manufactured in 2020. It features a SIEMENS SINUMERIK 828D control, a spindle speed of 4500 rpm, and a max turning diameter of 300 mm. The machine offers a max turning length of 510 mm and includes driven tools and a chip conveyor. The Doosan Lynx 2100LMB machine we have for sale is a reliable choice for efficient and precise metalworking. Reach out for more information about this lathe.

This 5-axis DOOSAN Lynx 2100LSYA lathe was manufactured in 2020. Featuring a SIEMENS SINUMERIK 828D control, it offers spindle speeds up to 6000 rpm and includes a sub-spindle for versatile operations. With a max turning diameter of 300 mm and length of 510 mm, it also has driven tools and rapid traverse rates up to 36 m/min. Consider this Doosan Lynx 2100LSYA lathe, ideal for advanced turning tasks. For more information, please reach out to us.

This DOOSAN Lynx 235II lathe was manufactured in 2024. It features a maximum turning diameter of 320 mm and a length of 525 mm, with a bar working diameter of 65 mm. The spindle supports a maximum speed of 4,000 rpm, ensuring efficient machining. Equipped with a 12-station turret and rapid traverses of 30 m/min (X-axis) and 36 m/min (Z-axis), this machine manufactured by DN Solutions (formerly DOOSAN MACHINE TOOLS), offers robust performance for precise operations. For more information about this lathe, please reach out to us.

This DOOSAN LYNX 220LMA Lathe was manufactured in 2007 in South Korea. It is equipped with a FANUC Oi-TC control. The machine has 2 axes (X-Axis Travel: 175 mm, Z-Axis Travel: 330 mm), a max. turning diameter of 320 mm and a max. turning length of 322 mm. It comes with 24 turret stations and a spindle speed range of 60-6000 rpm. Swing over bed is 510 mm and swing over carriage is 290 mm. This lathe is in good condition, only the coolant pump has an issue which requires a technical review.

This DOOSAN LYNX 2100 LSYB lathe was manufactured in 2018. It features a Fanuc i control system, an 8 Samchully MH-208 main chuck, and a 5 Samchully HS-05 sub chuck. The main spindle operates at 4500 RPM, while the sub spindle reaches 6000 RPM. Equipped with a 24 station turret and BMT45P, it supports a maximum diameter of 300 mm and lengths up to 510 mm. For more information about this lathe, please reach out to us.

BRAND: DOOSAN YEAR: 2017 MODEL: LYNX 220LSY APPLICATION TYPE: TURNING LOCATION: ITALY MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: FANUC MAIN DRIVE SPINDLE SPEED RANGE: 4500 1/MIN NUMBER OF AXIS: 4 Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - MAX DIAMETER 300MM - SUB SPINDLE: 6000 RPM - FULL CONTOUINGR C-AXIS - HEAVY DUTY 12 STATIONS TURRET THAT ACCEPT ROTATING TOOLS HOLDERS AND 24 POSITION INDEXING QUALITATIVE MACHINE BENEFITS: - MACHINE COMES WITH LEMCA BOSS 552 HEAVY DUTY - MILL-DRILL CAPABILITY AND Y-AXIS WITH FULL C-AXIS SUB SPINDLE, GREATLY REDUCE THE NEED FOR SECONDARY OPERATIONS, ELIMINATING ADDITIONAL SET-UP AND HANDLING COSTS. CLASSIC MANUFACTURING METHODS AND ULTRA RIGID CONSTRUCTION ARE COMBINED WITH ADVANCED TECHNOLOGICAL FEATURES TO PROVIDE EXCEPTIONAL VALUE. MAIN FEATURES - ...

BRAND: DOOSAN YEAR: 2017 MODEL: LYNX 220LSY APPLICATION TYPE: TURNING LOCATION: ITALY MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: FANUC MAIN DRIVE SPINDLE SPEED RANGE: 4500 1/MIN NUMBER OF AXIS: 4 Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - MAX DIAMETER 300MM - SUB SPINDLE: 6000 RPM - FULL CONTOUINGR C-AXIS - HEAVY DUTY 12 STATIONS TURRET THAT ACCEPT ROTATING TOOLS HOLDERS AND 24 POSITION INDEXING QUALITATIVE MACHINE BENEFITS: - MACHINE COMES WITH LEMCA BOSS 552 HEAVY DUTY - MILL-DRILL CAPABILITY AND Y-AXIS WITH FULL C-AXIS SUB SPINDLE, GREATLY REDUCE THE NEED FOR SECONDARY OPERATIONS, ELIMINATING ADDITIONAL SET-UP AND HANDLING COSTS. CLASSIC MANUFACTURING METHODS AND ULTRA RIGID CONSTRUCTION ARE COMBINED WITH ADVANCED TECHNOLOGICAL FEATURES TO PROVIDE EXCEPTIONAL VALUE. MAIN FEATURES - ...

Machine weight: 4200 kg Circulating diameter above the bed: 600 mm Revolving diameter above support: 400 mm Spindle speed - range: 45-4500 Max. workpiece weight: 120/300 kg Max. turning diameter: : 300 mm Max. turning length in chuck:: 510 mm Max. diameter of turned bar:: main spindle/counter spindle: 65/34

CNC Fanuc Oi-TC Rotating diameter on the bench 510 mm Rotating diameter on the carriage 290 mm Maximum turning diameter 250 mm Maximum turning length 510 mm Turning diameter from bar 51 mm X axis travel 175 mm (160 + 15) Z axis travel 550 mm Spindle speed Rpm 6000 Spindle motor Kw 12 ASA A2#5 spindle connection

Machine is in operation and immediately available. Machine has the following list of toolholders and also has a Sarigol (Turkish made) chip conveyor, chuck of the spindle has hard jaws. Machine is also equiped with an extra module from Siemens for in process tool measuring cycles for tool breakage detection. Spindle hours 10.640hrs

Machine is in operation and immediately available. Machine has the following list toolholders and also has a ready parts conveyor, a Sarigol (Turkish made) chip conveyor, chucks of the main spindle has hard jaws and that of sub spindle has a set of soft jaws. Machine is also equiped with an extra module from Siemens for in process tool measuring cycles for tool breakage detection. Spindle hours 11.000hrs

Machine Details Warehouse number 1105-03706 Machine type CNC lathe Make DOOSAN DAEWOO Type LYNX 210 Year of construction 2004 Control type CNC Control Fanuc 21-T Storage location FRANCE Country of origin KORREA Delivery time immediately Freight base from location Technical details Turning diameter 460 mm Turning length 300 mm Control Fanuc 21-T Turning diameter over bed 460 mm Turning diameter above the face carriage 280 mm Travel - x 160 mm Travel - z 330 mm Center width 335 mm Rapid traverse X-axis 12 m/min Rapid traverse Z-axis 15 m/min Speed range - main spindle 42 - 4,000 rpm Spindle nose A2-6 Spindle passage 51 mm Spindle bore 65 mm Spindle cone 1/20 Drive power - main spindle 7.5 kW Tool slots upper turret 10 . Shaft diameter 32 (round) mm Shaft diameter 20 (square) mm Pipe diameter max. 50 mm Chuck diameter 200 mm Coolant tank 87 l Total power ...

achine-Details Stock-No. 1105-03887 Type of machine CNC Lathe Make DOOSAN DAEWOO Type LYNX 200 LC Year of manufacture 1998 Type of control CNC Storage location HAGUENAU FRANCE Country of origin KORREA Delivery time immediately Freight basis ex site Price Technical details turning diameter 460 mm turning length 300 mm control Fanuc 21-T turning diameter over bed 460 mm turning dia. Over Face-Slide 280 mm Travel -x axis 160 mm Travel -Z AXIS 330 mm centre distance 335 mm rapid traverse X-axis 12 m/min rapid traverse Z-axis 15 m/min turning speed range - main spindle 42 - 4,000 rpm spindle nose A2-6 Spindle Passage 51 mm Spindle Bore 65 mm spindle cone 1/20 power capacity - main spindle 7.5 kW no. of tool upper turret 10 . Shank diameter 32 (round) mm Shank diameter 20 (square) mm tube diameter max. 50 mm Chucking diameter 200 mm Coolant Tank 87 L total ...

BRAND: DOOSAN YEAR: 2006 MODEL: LYNX 220A APPLICATION TYPE: TURNING LOCATION: SOUTH KOREA MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MACHINE WEIGHT: 3500 KG CONTROL UNIT BRAND: FANUC MODEL: I SERIES Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - 6" TURRET

CNC lathe LYNX 2100 B Manufacturer: DOOSAN Year: 2017 Control Fanuc ... i Series Turning diameter ... 350mm Rotation length ... 330mm inclined bed Spindle bore ... 76mm Turret Machine weight... 2750kg Axis X ... 300mm Axis Z ... 360mm Feed diameter ... 210mm Spindle speed ... 1-4500/min. L x W x H ... 2350x1595x1693mm The machine is in good condition, possible to test under electricity.

Inv. Num. : 5837 Type: LYNX 220 LSYC Producer: DOOSAN Created: 2018 Parameters: Control system: DOOSAN FANUC-i Duty cycle: 8205 h Maximum turning length: 510 mm Max. turning diameter: 300 mm Maximum turning diameter over bed: 600 mm Maximum turning diameter over support: 400 mm Controlled axes: X/Z/Y/C1/C2/B Maximum travel length in the X-axis: 205 mm Maximum feed rate in the Z-axis: 560 mm Axis Y: 105 mm C1/C2 axis: 360 Maximum main spindle power: 15 kW Spindle clearance: 76 mm Minimum main spindle speed: 45 1/min Maximum spindle speed: 4500 1/min Maximum workpiece weight: 300 kg Maximum travel length in the B-axis: 560 mm Max. passage of bar material: 65 mm Length: 2880 mm Width: 1710 mm Height: 1920 mm Weight: 4200 kg Equipment: Bar feeder SS 2500 Conveyor

equipped with Top Automazioni Fusion 350 barfeed new in 2021, Lns Turbo HB chip conveyor, well tooled, Doosan-Fanuc i-Plus iHMI Control, IMMEDIATELY AVAILABLE.

Bar stock capacity...........................2.56" Max swing (inches)...........................20.08" Spindle motor (hp)...........................20 HP Chuck size (inches)...........................8" Maximum turning length..........................20.7" Tailstock quill stroke..........................3.14" Maximum turning diameter........................12.6" X - axis travel (inches).........................6.89" Z - axis travel (inches).........................21.65" Rapid traverse rates x, z.......................1181 PM / 1417 IPM Maximum swing over carriage......................11.42" Spindle nose / spindle bore.......................A2-6" / 2.99"

Inv. Num. : 7621 Type: LYNX 2100 GA Produzent: DOOSAN Erzeugt: 2021 Parametern: Steuerungssystem: DOOSAN FANUC iSeries Einschaltstunden: 4017 h Betriebsstunden: 130 h Maximal-Drehlänge: 510 mm Max. Drehdurchmesser: 350 mm Maximale Länge Verfahrweg in der X-Achse: 205 mm Maximale Länge Verfahrweg in der Y-Achse: 105 mm Maximaler Vorschub in der Z-Achse: 560 mm Länge: 1595 mm Breite: 2570 mm Höhe: 1693 mm Gewicht: 3480 kg Ausstattung: Platzsparender Stangenlader 8 Stück Werkzeughalter

Inv. Num. : 6699 Type: LYNX 220 LSA Produzent: DOOSAN Erzeugt: 2012 Parametern: Steuerungssystem: FANUC iSeries Maximal-Drehlänge: 510 mm Max. Drehdurchmesser: 300 mm Maximaler Drehdurchmesser über Bett: 600 mm Maximaler Drehdurchmesser über Support: 400 mm Maximale Spindeldrehzahl: 6000 1/min Max. Stangendurchmesser: 51 mm Länge: 2763 mm Breite: 1627 mm Höhe: 1655 mm Gewicht: 3400 kg Ausstattung: Gegenspindel Stangenlader Hydrobar

Control Fanuc ... i Series Turning diameter ... 600mm Turning length ... 330mm Inclined bed Spindle bore ... 61mm Turret Circumferential diameter over bed ... 600mm Circumferential diameter via support ... 400mm Axis X ... 205mm Axis Z ... 340mm Rapid traverse of the X axis ... 30m/min Rapid traverse of the Z axis ... 36m/min Spin speed... 0-6000 rpm. Max. spindle torque ... 127Nm Main engine power ... 11/15kW Doosan Robot Cell Assembly: 2x LYNX 2100A + ROBOTEC APC7 (Fanuc AM-100 iC6L) - The machines are supplied with chucks and pliers - High pressure cooling 20bar - Arm for picking up workpieces (Ø65 x L130 mm, weight 3 kg) - Automatic door opening - Spindle bladders for cleaning the clamping jaws - Oil separator - OIL SKIMMER - Tool Load Monitor (works with X-, Z-axis and S-spindle) - Workpiece conveyor The machine is in good condition, possible to test un ...

CNC lathe Year of construction: 2008 CNC Fanuc Oi-TC Rotating diameter on the bed Mm 510 Rotating diameter on the carriage Mm 290 Maximum turning diameter Mm 250 Maximum turning length Mm 510 Turning diameter from bar Mm 51 X-axis travel Mm 175 (160 + 15) Z-axis travel Mm 550 Spindle speed Rpm 6000 Spindle motor Kw 12 Spindle attachment ASA A2#5