used DESMA 968

This Klockner DESMA 968.250 ZO Injection moulding machine was manufactured in the year 2010 in Germany and has 27676 production hours. It is equipped with a DESMA DRC 2010 control unit. The machine has a clamping force of 2700 kN.

BRAND: KLOECKNER DESMA YEAR: 2010 MODEL: 968.250 ZO PRODUCTION HOURS: 27676 APPLICATION TYPE: INJECTION MOULDING LOCATION: POLAND MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MACHINE WEIGHT: 8000 KG CONTROL UNIT BRAND: DESMA MODEL: DRC 2010 INJECTION UNIT INJECTION PRESSURE: 1730 BAR CLAMPING UNIT CLAMPING FORCE: 2700 KN Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - HEATING PLATES SIZE: 630 MM X 560 MM - INJECTION VOLUME: 2000 CM3 - EJECTOR ON FIXED PLATE - EJECTOR ON MOVABLE PLATE - OPTIONS INCLUDED: 2 EJECTORS VACUUM PUMP QUALITATIVE MACHINE BENEFITS: - THE MACHINE IS IN VERY GOOD CONDITION AND READY FOR TESTS. FULL DOCUMENTATION AVAILABLE.

clamping force: 2700 kN injection volume: 3300 cm³ screw diameter: -- mm platen size: 780 x 670 mm Condition: used, Specification: vertical injection moulding machine for rubber NR, EPDM, SBR, NBR, CR, etc. - used, in very good condition 6 months in use clamping unit: - Euromap (size): 2700-7200 - Clamping force: 2,700 kN - Heating platen size L/W/H: 780 x 670 mm - Distance between upper and lower platen: 970 mm - Stroke min.: 420 mm - Stroke: 550 mm Injection unit: - Injection volume max.: 3,300 cm³ - Injection pressure: 2,180 bar - Nozzle contact force: 80 kN - Connected load: 3x 400 V, 50 Hz, N - Back-up fuse: 125 A - Pump drive: 265 bar - Drive power: 22 kW - Pump speed: 66 rpm - Current: 41 A - Weight approx.: 11.2 tonnes Operating hours approx.: 8,185 hours ...

clamping force: 2700 kN injection volume: 3300 cm³ screw diameter: -- mm platen size: 780 x 670 mm Condition: used, Specification: vertical injection moulding machine for rubber NR, EPDM, SBR, NBR, CR, etc. - used, in very good condition almost unused! clamping unit: - Euromap (size): 2700-7200 - Clamping force: 2,700 kN - Heating platen size L/W/H: 780 x 670 mm - Distance between upper and lower platen: 970 mm - Stroke min.: 420 mm - Stroke: 550 mm Injection unit: - Injection volume max.: 3,300 cm³ - Injection pressure: 2,180 bar - Nozzle contact force: 80 kN - Connected load: 3x 400 V, 50 Hz, N - Back-up fuse: 125 A - Pump drive: 265 bar - Drive power: 22 kW - Pump speed: 66 rpm - Current: 41 A - Weight approx.: 11.2 tonnes Operating hours approx.: 395 hours  ...

Closing unit Clamping force t: 200 Opening path mm: 650 Holm size mm: 520 x520 Installation height min/max mm: 350 Plate size: 820 x 820 Spraying unit Screw diameter mm: 820 x 820 Spray weight gr: 440 Spray volume cm3: 510 Spray pressure bar: 1910 Dimensions and weights Dimensions LxWxH m: 5.5 x 1.3 Machine Weight Kg: 10000 Other Battery Euromap 12

Displacement: 1500 cm³ Clamping force: 2500 kN Injection pressure: 2000 bar Table height: 1,000 mm Locking system: fully hydraulic Voltage: 380 V Motor power: 26 kW Cooling water: 1 m³/h Weight: 5.5 t - Injects from above (type ZO) - Ergonomic overall design of the vertical machine - Generously dimensioned clamping unit - Extensive automation options for vertical machines - "One Piece Design" for maximum flexibility The machine belongs to a German company and until recently was in operation at their Serbian plant and ran flawlessly.

Table height: 1000 mm Locking system: fully hydraulic Clamping force: 2500 kN Spray volume: 1500 cm³ Hydraulic oil: 40/46 cPcs. Compressed air: 6 bar Voltage: 400 V Weight: 6.35 t - Injects from below (type VU) - Ergonomic overall design - Generously dimensioned clamping unit - Fully hydraulic extensive automation possibilities of vertical machines - "One Piece Design" for maximum flexibility The machine belongs to a German company and until recently was in operation at their Serbian plant and ran flawlessly.

DESMA injection molding machine for direct injection of shoes. Injects PVC, TPR and TPU granules. 12 stations mean that 6 pairs of shoes are injected at the same time. The machine consists of a turntable (carousel), a hydraulic part, an injection unit and a control cabinet. The machine after the extensive renovation of the screw and cylinder and other wearing parts. The machine is in very good condition. Sn. 11-17706 We have 5 pieces of this machine and many more other machines from a shoe factory.

Drill Desma-Werke HS 30VG In the case of the drill, the motor must be rewound.

Desma rubber injection molding machine 969.100 In the machine to replace is the control cable Year 1997

Clamping force: 2700kN, stroke volume: 20,300cm³, injection pressure: 1360bar, total power: 418kW, the machine was completely overhauled in 2008, it got new pumps and all bushings and guides were renewed, in 2016 the machine got a new Siemens control, in 2021 all pumps and valves were recalibrated and in 2021 all slide rails were renewed.

Tool case, tool box, plastic tool box, tool trolley -Manufacturer: Stanley, plastic tool box tool trolley type 1-93-968 -3 compartments: see photos -lockable: without lock -Dimensions: 470/310/H620 mm -Weight: 4.5 kg

Solenoid valve, directional control valve, UNIVER CM-9685 2.8 - 10 bar Connections: G1/4 ( inch ) without solenoid coils New ! Dimensions ( valve ): 225 x 48 x 26 mm

Filter cartridge, air filter insert CROSLAND 9684 30823 Diameter (outside): 265 mm Diameter (inside): 135 mm Diameter (lid): 320 mm, Bore: Ø 11 mm Height: 210 mm New ! Dimensions 340 x 340 x 280 mm

Year of construction 1994 Stack mass: Depth - 2.40 meters High - 3.00 mtr Long - 11.50 meters Drying capacity - са.75 m3 gross Fans - 7 х 0.75 квт Chamber construction - container construction is not desmantlebel! Interior trim - Aluminium welded 2.0 mm Insulation - rock wool 80 mm Outdoor installation Electrical cabinet with computer control system MB-400 Very good condition

2-axis universal turning machine with SUPFINA superfinishing attachement Working area swing diameter over guide way protection: 500 mm -- 19,68 in clamping chuck diameter: 170 (210) mm -- 6,69 (8,26) in transverse stroke (X axis): 190 mm -- 7,48 in longitudinal stroke (Z axis): 525 mm -- 20,66 in Feed drive rapid feed, X/Z axes: 30/30 m/min -- 1181,1/1181,1 in/min Y axis* 22.5 m/min -- 885.8 in/min Main stock spindle nose size: 140 h5 mm spindle diameter in front bearing: 100 mm 3,93 in spindle bore diameter: 73 mm 2,87 in Main drive AC main drive power (100%-40% ED) 13 - 14 kW 17,42 ? 18,76 HP Torque (100%-40% ED) 171,5 - 192 Nm 126,49 - 141,61 ft.Lb Speed range 20 ? 6000 rpm Electrical connection (5 conductor system, L1, L2, L3, N, PE) connected load, total approx. 30 kVA voltage: 400 V frequency: 50 Hz protection (slow-blow) acc. to VDE 0100: 63 A per ...

Machine type MIG/MAG inverter welding system Make Merkle Type MobiMIG 180 K Connection voltage 1 x 230 volts Adjustment range 25 - 180 amperes Switch-on time 20% ED at 180 amperes 60% ED at 110 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed gearbox 2-wheel transmission Fuse 16 Ampere Dimensions L x W x H 450 x 210 x 480 mm Special accessories ColdMIG welding process E-welding, MIG soldering Filling wire welding Weight 17 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 157 G, 3 mtr. Long 1 piece ground cable 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-200 coil, 5 kg 1 can  ...

2-axis universal turning machine with SUPFINA superfinishing attachement Working area swing diameter over guide way protection: 500 mm -- 19,68 in clamping chuck diameter: 170 (210) mm -- 6,69 (8,26) in transverse stroke (X axis): 190 mm -- 7,48 in longitudinal stroke (Z axis): 525 mm -- 20,66 in Feed drive rapid feed, X/Z axes: 30/30 m/min -- 1181,1/1181,1 in/min Y axis* 22.5 m/min -- 885.8 in/min Main stock spindle nose size: 140 h5 mm spindle diameter in front bearing: 100 mm 3,93 in spindle bore diameter: 73 mm 2,87 in Main drive AC main drive power (100%-40% ED) 13 - 14 kW 17,42 ? 18,76 HP Torque (100%-40% ED) 171,5 - 192 Nm 126,49 - 141,61 ft.Lb Speed range 20 ? 6000 rpm Electrical connection (5 conductor system, L1, L2, L3, N, PE) connected load, total approx. 30 kVA voltage: 400 V frequency: 50 Hz protection (slow-blow) acc. to VDE 0100: 63 A per ...

H.E.F. HEF DURFERRIT salt bath nitriding line was built in 2001. This highly advanced production line makes it possible to improve the mechanical properties of the workpiece by increasing its strength and resistance to wear and corrosion. To achieve this, the workpieces undergo thermo-chemical treatment in the form of salt bath nitriding, which results in an anthracite or black colour and a surface hardness of up to 1300 HV. The H.E.F. HEF DURFERRIT thermo-chemical treatment line has been continuously serviced and upgraded throughout its service life. About 2.5 years ago, the lining and heaters were overhauled and the main nitriding ladle was replaced. It is also possible to purchase a new spare main ladle for the offered machine at an additional cost. The production line includes: – a ladle for washing/rinsing workpieces (3 pcs.) – plunge pre-heating furnace – SURSULF nit ...

MAN 0836 LE202 :Silkeborg 100 KW Engine type MAN 0836 LE202 Generator type Stamford UCI274E changed 2016 Gastype Biogas Year 2007 Runninghours total 85933 Runninghours after last ouverhaul 22000 Serviced regulary Yes Nissen Denmark Full service histori Yes Nissen Denmark Engine changed No ouverhouled Engine condition Extremly Good Engine still in operation Until 18/11 2019 Exhaurst heat exchanger Yes Radiator Yes Gasline Yes Silencer Yes Curkit breaker panel No Panelboard Yes Batteries Yes 2 Charging unit Yes Pumps and pipes Yes Cabels Yes Dokumentation Yes Ventilation system No Desmantling and loading Yes Compleat container unit No Price in euro 9500 euro

Jenbacher 208 (Thorsoe) Engine type Jenbacher 208 Generator type Stamford HC534 Gastype Naturalgas Year 1997 Runninghours total 138000 Runninghours after last ouverhaul 17352 Serviced regulary Yes Jenbacher Denmark Full service histori Yes Jenbacher Denmark Engine changed No Engine condition Good Engine still in operation Yes Exhaurst heat exchanger Yes Jenbacher Radiator Yes Gasline Yes Silencer Yes Curkit breaker panel Yes Jenbacher changed in 2018 Panelboard Yes Diana Blue Batteries Yes 2 Charging unit Yes Pumps and pipes Yes Cabels Yes Comunication cabels Dokumentation Yes Ventilation system No Desmantling and loading Yes Compleat container unit No Price in euro 22500 euro

TO WHOM WITH MAY CONCERN; WE HAVE 12 PCS NEW UNUSED WOODWARD LINKNET 6 CHANNEL MODULES AT OUR STOCK PLS FIND LIST WITH PART NUMBERS ON BELOW 9905 - 973 3PCS 9905 - 969 3PCS 9905 - 968 2PCS 9905 - 970 1PCS 9905 - 971 1PCS 9905 - 973. 2PCS PLS REFER SOME PICTURES ON ATTACHE . IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY

We offer 46 x Doka Framax 270 x 240 elements, partly re-occupied, from special net price 799,00€/ piece. All elements are controlled and ready for immediate use. Ready for use for SB 2/3 without any problems. 17 x 270 x 240 Item 799,00€ / Piece. 29 x 270 x 240 Element new phenolic resin formlining 968,00€/ piece. If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055

Jenbacher 312 (FLJeppesen) Engine type Jenbacher 312 Generator type Stamford HC634 Gastype Biogas Year 2007 Runninghours total 75100 Runninghours after last ouverhaul 15000 Serviced regulary Yes Jenbacher Denmark Full service histori Yes Jenbacher Denmark Engine changed No Engine condition Extremly Good Engine still in operation Yes Exhaurst heat exchanger No Radiator No Gasline Yes Silencer No Curkit breaker Yes Panelboard Yes Diane XT Batteries Yes 2 Charging unit Yes Pumps and pipes No Cabels Yes Comunication cabels Dokumentation Yes Ventilation system No Desmantling and loading Yes Compleat container unit No Price in euro 31.500 euro

Description Piovan dehumidifiers board DST01.V2s Piovan code 968D00901 from spare parts warehouse no disassembly