used COLCHESTER Triumph

Used lathe Internal machine number m3533 Manufacturer: Colchester Type Triumph 2000 Ma.Number 36658 Center width 750 mm Center height 190 mm Spindle bore 54 mm Speeds 25 to 2,000 rpm. Weight approx. 1,200 kg With cabinet and accessories Location: 59425 Unna The machine can be viewed and tried out under electricity. We will be happy to send you more photos by e-mail. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to ...

1 x L+Z lathe Colchester Mascot 1600/600 Built: c.1975 Very stable lathe. Ideal machine for locksmiths or agricultural machine mechanics. Technical data: Turning diameter over crimson: 710 mm Turning diameter over bed:432 mm Turning diameter via support:267 mm Turning length: 1,000 mm Spindle speeds:20 - 1600 rpm Spindle bore:76 mm Drive motor:5.6 kW Feeds: 0.6 - 10 mm/u Metric threads: 40 (0.4 - 14 mm incline) Machine weight approx.:2000 kg Room requirements approx.:l:2.65 x w:1.1 x h:1.6 m Accessories: 3 - Jaw lining UVA 310 mm 4 Set of change jaws Bfraed8ae0 Tripan quick-change system 4 x Interchangeable holder running counter tip in tailstock (MK 5) Countertip in spindle Alternating wheels Manual Mudguard complete documentation The machine can be inspected at our warehouse in Reichenbach under electricity.

Conventional control type Specifications: Turning length 1270 mm Turning diameter via support 400 mm Tip height 200 mm Spindle bore 55.5 mm Turning diameter over bed 400 mm Tailstock pinole holder MK 4 MK Speed 2000 rpm Turning diameter in the crimping 600 mm Total power requirement 7.5 kW Dimensions L-W-H 2x 1.3 x 1.5 mm Weight 1450 kg

Heavy lathe, lathe, lathe, lead and pull screw lathe, lead and pull screw lathe -Manufacturer: Colchester, lead and pull spindle lathe type Triumph 2000 -Turning length: 1300 mm -Swivel Ø over bed: 390 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 55 mm -Spindle speeds: 22 - 2000 rpm -Three-jaw chuck: Ø 250 mm -Accessories: tool holder/tools see photos -Tailstock mount: MK4 -Dimensions: 960/2435/H1640 mm -Weight: 1327 kg

turning diameter over bed: 400 mm centre height: 195 mm turning diameter over slide rest: 246 mm turning length: 650 mm spindle turning speed - stepless: 0-2500 U/min total power requirement: 7,5 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2x1.3x1.6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0400 mm : 246 mm : 1250 mm : 195 mm : 54 mm : 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mm centre height: 195 mm turning diameter over slide rest: 246 mm turning length: 1250 mm spindle turning speed - stepless: 0-2500 U/min weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2x1.3x1.6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 400 mm turning length: 1250 mm swing diameter over bed slide: 245 mm turning speeds: 0 - 2500 U/min spindle bore: 54 mm quill stroke: 160 mm tailstock quill taper MT: 5 total power requirement: 7,5 kW weight of the machine ca.: 1800 kg dimensions of the machine ca.: 3000 x 1300 x 1750 mm - MULTIFIX steel holder - RÖHM 4-jaw chuck Ø250 mm - Lathe chuck protection - Chip protection rear wall The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0400 mm : 246 mm : 1250 mm : 195 mm : 54 mm : 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity Swing over bed 400mm 15.7″ Swing over cross slide 246mm 9.6″ Height of centres 195mm 7.7″ Swing in gap 585mm 23″ Gap width from faceplate 165mm 6.5″ Bed length 1270mm 50″ Distance between centres 1270mm 50″ Spindle Spindle nose D1 – 6 Camlock D1 – 6 Camlock Taper in spindle nose bush No 4 MT No 4 MT Spindle bore 54mm 2.1″ Maximum spindle speed 2500 rpm 2500 rpm Spindle speed ranges Low 14 – 300 rpm 14 – 300 rpm Medium 36 – 830 rpm 36 – 830 rpm High 109 – 2500 rpm 109 – 2500 rpm Maximum spindle motor power 7.5kW 10 HP Number of Imperial Pitches 56 56 Range of Imperial Pitches 2 – 56 TPI 2 – 56 TPI Number of Diametral Pitches 20 20 Range of Diametral Pitches 8 – 56 DP 8 – 56 DP Number of Metric Pitches 51 51 Range of Metric Pitches 0.2 – 14mm Pitch 0.2 – 14mm Pitch Number of Module Pitches 20 ...

Description: Operating voltage: 380 V Frequency: 50 Hz Rated current: 10 - 16 A Connection: 7.5 kW Spindle speed: 25 - 2000 rpm Center length: approx. 1200 mm Center height above bed: approx. 200 mm Turning diameter over bed: approx. 400 mm Center height above support: approx. 150 mm Turning diameter above support: approx. 300 mm Spindle clearance: approx. 33 mm The machine is equipped with a tailstock, a Multifix steel holder and a four-jaw chuck Diameter: 200 mm Also with another three-jaw chuck and a steady rest Steady rest diameter: 120 mm weight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 2,200 x 750 x 1,400 mm

Description: Lead and feed spindle lathe - Röhm three-jaw chuck 200mm - Multifix quick-change holder - Collet chuck - Chip tray Turning diameter over bed 500 mm Turning diameter over support 300 mm Turning length 1000 mm Speeds 20 - 1600 rpm Spindle bore 63 mm Total power requirement 10.0 HP Machine weight approx. 1.5 t Space requirement approx. 2.45 x 1.0 x 1.5 m weight approx.: 1,500 kg, Approx. Onsite Dimension. (l x w x h): 2,450 x 1,000 x 1,500 mm

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 1000 mm speeds: 20 - 1600 U/min spindle bore: 63 mm total power requirement: 10,0 HP weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,45 x 1,0 x 1,5 m Lead and spindle lathe - Röhm three-jaw chuck 200mm - Multifix quick-change holder - Collet chuck - Chip tray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Center height: 200 mm Center distance: 1250 mm Spindle bore: 54 mm COLCHESTER - TRIUMPH 2500 VS Universal lathe Ø 400 x 1250 mm MACH - ID 6285 Make: COLCHESTER Type: TRIUMPH 2500 VS YOP: 1995 Swing over bed Ø    400 mm Swing over cross slide Ø    246 mm Swing in the gap Ø    585 mm DBC Turning Length     1.250 mm Spindle bore     54 mm Spindle power       7.5 kW Bed width      318 mm Spindle taper    4 Mk Speeds / ranges     2500 Vario Rpm Dimensions Length      2.800 mm Width       1.350 mm Height      1.650 mm Weight     1.800 kg

Metal Lathe make COLCHESTER Type Master 2500 / 165x1000Fabr. -No: MCH No 5/0009/07505, year of construction 1979Tip width: 1000 mmTop height: 165 mmTurning diameter over bed: 335 mmTurning diameter over cross slide: 210 mmSpindle bore: 40 mm16 spindle speeds: 30 - 2500 rpm.39 metric thread pitches: 0.2 - 14 mm45 Whiteworth thread pitches: 2 - 72 tip18 module thread pitches: 0.3 - 3.521 diametrical pitch thread pitches: 0 - 44 DPLongitudinal feeds: 0.03 - 1.0 mmFeed rates: 0.015 - 0.5 mmDrive power: 3.7 kWExternal dimensions: 1985 x 890 x 1195 mmWeight approx: 890 kgWith- 3- jaw chuck diameter 200 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWA ...

Metal Lathe Make COLCHESTER Type Master 2500Fabr. -No: MCH No 5/0007/05812, built in 1977Tip width: 635 mmTop height: 165 mmTurning diameter over bed: 335 mmTurning diameter over cross slide: 210 mmSpindle hole: 40 mm16 spindle speeds: 30 - 2500 rpm.39 metric pitches: 0.2 - 14 mm45 Whiteworth thread pitches: 2 - 72 tip18 module thread pitches: 0.3 - 3.521 diametral pitch thread pitches: 0 - 44 DPLongitudinal feeds: 0.03 - 1.0 mmFlat feeds: 0.015 - 0.5 mmDrive power: 3.7 kWExternal dimensions: 1985 x 890 x 1195 mmWeight approx: 855 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Center height: 635 mm Center distance: 3000 mm Spindle bore: 116 mm Swing over bed Ø:        635mm Swing over cross slide Ø:390mm Swing in the gap Ø:      900mm DBC Turning Length:      3000mm Gap length:              300mm Spindle bore:            116mm Spindle power:           15kW Bed width:               480mm Tailstock spindle Ø:     95Ø Stroke pinole:           190mm Spindle taper:           6Mk Length:                  4820mm Width:                   1600mm Height:              & ...

Mastiff 1400 Distance between centers: 2000 mm Swing over bed: 535 mm Swing over cross-slide: 368 mm Swing in gap: 810 mm Diametre of main spindle bore: 89 mm Power on main spindle: 9,3 kW Number of speeds: 18 > 1400 rpm Weight: 2,6 ton

Colchester Mascot Ø 432 x 1524 mm Distance between centers: 1524 mm Swing over bed: 432 mm Swing over cross-slide: 267 mm Swing in gap: 710 mm Diametre of main spindle bore: 76 mm Power on main spindle: 9,3 kW Number of speeds: 20 > 1600 rpm Weight: 2310 kg

BRAND: COLCHESTER YEAR: 1998 MODEL: MASTIFF V/S 1800 APPLICATION TYPE: TURNING LOCATION: POLAND MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 3750 MM MEASUREMENTS DEPTH: 1700 MM MEASUREMENTS HEIGHT: 2100 MM MACHINE WEIGHT: 3250 KG CONTROL UNIT BRAND: SONY MODEL: LH52 MAIN DRIVE SPINDLE SPEED RANGE: 18 - 1800 1/MIN SPINDLE MOTOR POWER: 11 KW Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - MAX TURNING LENGTH: 2000 MM - MAX TURNING DIAMETER OVER BED: 560 MM - MAX TURNING DIAMETER OVER SUPPORT: 370 MM - MAX TURNING DIAMETER OVER SLOT: 830 MM - INVERTER: MITSUBISHI FREQROL A200 - SPINDLE BORE DIAMETER: 90 MM

Key data: 330 mm, 635 mm, 210 mm

brand new, toolmaker accuracy DIN 8605 Center height 167 mm Center width 635 mm Circulation diameter. over bed 330 mm Circulation diameter. over cross slides 210 mm Circulation diameter. in the offset 480 mm Main spindle bore 40 mm Speed range 40 - 2500 rpm Cone in tailstock MK 3 Drive power 2.2 kW Standard equipment: - 2-axis digital display ACU-RITE® DRO 203 - Precision spindle bearing thanks to NSK® tapered roller bearings - Quick-change steel holder MULTIFIX® size MA - Chip collection tray with opening flap at the front - Movable steel holder protection - Rear splash and chip protection wall - Feed protection - Spindle cover - Removable bridge - Coolant system - Work area lighting - Thread clock - Large matt chrome-plated scales - Foot brake with brake pedal over the entire length -Operating instructions - CE declaration of conformity

Turning diameter over bed: 400mm, center distance: 1250mm, spindle bore: 55mm, speed: 2700rpm, spindle power 7.5kW, control: Fanuc 0i-TF Plus. Including various accessories.

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 190 mm Distance between centres: 750 mm Swing over cross-slide: 240 mm Swing over bed: 390 mm Swing in gap: 580 mm Spindle hole: 54 mm Taper in spindelstock MK: 4 Taper in spindle: Camlock: 6" D1 Spindle speeds: number (steps): 16 from: 25 rpm up to: 2000 rpm Taper in tailstock:: 4 MT Spindle stroke: 155 mm Feeds: length: from: 0.04 mm/r up to: 1 mm/r Frontal: from: 0.02 mm/r up to: 0.5 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 7.5 HP Machine´s weight about: 1170 kg Overall dimensions machine: Length: 2000 mm Width: 1000 mm Height: 1500 mm Various accessories: Digital readout number of axis: Manufacturer: HEIDENHAIN Face plate diameter: 380 mm 3-jaw chuck diameter: 200 mm Set of jaws hard Set of jaws Coolant system Quick closing attachment Chuck adaptor Fixed s ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 210i-T Technical data Distance between centres: 2000 mm Turning diameter over cross-slide: 370 mm Swing over bed: 554 mm Spindle nose: D1-11 Spindle hole: 104 mm Maximum turning length: 2000 mm Cross slide: Longitudinal travel (Z-axis): 1920 mm Transversal strocke (X axis): 290 mm Main spindle: Taper in spindle: Camlock: D1-6 CAMLOCK Spindle speeds: number (steps): 3 from: 16 rpm up to: 1800 rpm Taper in tailstock: Morse taper: 6 MT Spindle stroke: 178 mm Spindle diameter: 95 mm Rapid traverse:: 10 m/min Spindle motor: 11 / 7.5 kW Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 4000 kg Overall dimensions machine: Length: 3300 mm Width: 1800 mm Height: 1700 mm Various accessories: 3-jaw chuck diameter: 400 mm 4-jaw chuck diamet ...

Key data: 216

Center height: 216 mm Center distance: 2000 mm Spindle bore: 76 mm Make: COLCHESTER Type: Mascot 1600 YOP: 1993 Swing over bed Ø:        432mm Swing over cross slide Ø:267mm Swing in the gap Ø:      710mm DBC Turning Length:      2.000mm Spindle bore:            76mm Spindle power:           7,5 kW Tailstock spindle Ø:     60Ø Stroke pinole:           120mm Spindle taper:           5Mk Speeds / ranges:         2000Rpm Length:                  3.500 mm  Width:                   1.500 mm  Height:                   ...