used BAIER Geba

Baier Geba 9/A Hot Stamping Machine, 220/380 Volts, 10 Ampere, Embossing Presure: 4 Tons, Stamping Surface 150x230mm, With Motor Driven Foil Feeding Device

Heißfolienprägemaschine / Hot Foil Stamping Baier GEBA 1/F Serial-No. 67204 Druckleistung / Pressure max. 600Kg Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Heißfolienprägemaschine / Hot Foil Stamping Baier GEBA 1/F Serial-No. 67204 Druckleistung / Pressure max. 600Kg Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Format 210 x 300 mm, mechanically 10 t punching pressure, with heating, automatic roll unwinding and rewinding, two-hand indentation, stroke: 40 mm, with film feed single, motor-driven, adjustable via adding preset counter, hand-operated sliding table, adjustable from front to back, cliché holding plate without closing frame, foil cooling device

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stamping pressure : 40 kN Stamping area : 150 x 210 mm Stamping die holding plate : with dove-tail guiding Stroke of plunger : 28 mm Daylight (adjustment of height) : 0-180 mm Throat (middle of stamping plate to bow) : 190 mm Foil feeding system : motor-driven, 1-fold running from the left to the right side with foil re-winding device Working table : sliding automatically in and out with table lock pneumatic, 400 mm x 450 mm PLC : Siemens S 7-1500 with TP 700 color Safety device : in CE-execution with safety light curtains in front Color of the machine : light grey RAL 7035 Voltage: 3 x 400 VAC (L1/L2/L3/N/PE), 50 Hz. Pneumatic access : oil and water free compressed air, 6bar

Stamping pressure : 40 kN Stamping area : 150 x 210 mm Stamping die holding plate : with dove-tail guiding Stroke of plunger : 28 mm Daylight (adjustment of height) : 0-180 mm Throat (middle of stamping plate to bow) : 190 mm Foil feeding system : motor-driven, 1-fold running from the left to the right side with foil re-winding device Working table : sliding automatically in and out with table lock pneumatic, 400 mm x 450 mm PLC : Siemens S 7-1500 with TP 700 color Safety device : in CE-execution with safety light curtains in front Color of the machine : light grey RAL 7035 Voltage: 3 x 400 VAC (L1/L2/L3/N/PE), 50 Hz. Pneumatic access : oil and water free compressed air, 6bar

workpiece length: 30 - 600 mm workpiece dia.: 6 - 60 mm face diameter: max. 50 mm core boring - depth: 50 mm forward feed of working head: 55 mm feed speeds: max. 4000 mm/min rapid speed: 6 m/min fine feed: 10 mm/min spindle turning speed range: 700 / 1400 U/min drive motor: 3,7 kW weight of the machine ca.: 280 kg dimensions of the machine ca.: 1,10 x 0,50 x 2,00 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece length: 30 - 600 mm workpiece dia.: 6 - 60 mm face diameter: max. 50 mm core boring - depth: 50 mm forward feed of working head: 55 mm feed speeds: max. 4000 mm/min rapid speed: 6 m/min fine feed: 10 mm/min spindle turning speed range: 700 / 1400 U/min drive motor: 3,7 kW weight of the machine ca.: 280 kg dimensions of the machine ca.: 1,10 x 0,50 x 2,00 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump, piston pump, lubrication pump, oil central lubrication pump, single-line lubrication -Manufacturer: BEKA Baier Köppel, OIL central lubrication pump from milling machine Deckel FP4L -Type: EA 6.3. -Engine: ABM 0.18 kW -Dimensions: 280/140/H375mm -Weight: 14.1 kg

no. of strokes: 165 Hub/min pressure: 3 t weight of the machine ca.: 3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Folienschneider / Foil Cutter BAIER FOLSCH Baujahr / Year 1966 - Serial-No. 66236 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

A hot stamping system is available for hot stamping the silver edge on instrument panels. Heating capacity: 5.6 kW, stamping force: 20 kN, max. pressure: 6 bar. Including laminar flow module Spetec Super Silent. Documentation available. On-site inspection is possible.

Prägepresse / Hot Foil Stamping Press Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Sell salmon slicer in very good condition.

Cutting cutter for small cut - Leo with inlet shaft table railmade made of stainless steel power up to approx. 2000 Broetchen Cutting height adjustable Gebaecke max. 160 x 80 mm, WxH Connection 230V, plug-in mass (WxDxH) in mm: 800 x 440 x 470 optional: -driving table for LEO ; ready to go!

Fünffachkopf 110 mm Stich, Typ 5 BKZ 40/110. Stich 110 mm, Düse bis 40 mm. Doppelte Herzkurve, wird bis heute unverändert von Bekum gebaut. Mit WDS. Wird vor Auslieferung gesäubert und geprüft.

Technische Daten: Technische Daten - Vorschub + Auf / Ab - Sägekopf elektrisch regelbar - 2-teiliger Grundrahmen - Bedienersitz - Wenderollen - Stammspanner - zusätzliche Stammauflagen - Sichtlineal - Kreisskala - mechan. manuell verstellbare Sägeblattführung - max. Stammdurchmesser 1100 mm - max. Schnittlänge 11 m - Hauptmotor 10 kW - Vorschubmotor 0,55 / 1,05 kW - Hubmotor 1,1 kW - Sägeband L= 4010 bis 4140 mm, B=30 bis 35 mm - Vorschubgeschwindigkeiten: 1. Stufe: 2,2 bis 4,5 m / min 2. Stufe: 4,5 bis 9,0 m / min 3. Stufe: 7,0 bis 9,0 m / min 4. Stufe: 14,0 bis 28,0 m / min - Gesamtgewicht ca. 1250 kg - Abmessungen L=13,0 m x B=2,05 m x H=1,35 m

SALMON SLICER-PORTIONER, GEBA TYPE: GPS 200 ASW Technical description: Serial number: 6000 204 Year: 2002 Power supply: 380/440 V - 50/60 Hz - 3 Ph Band width: 390 mm (plastic) Weight: 475 Kg Dimensions: 2750 x 1000 x 1490 mm The GPS 200 ASW is the Top Slicer. When the GP series was introduced in 2000 it caused a revolution. The industrial look initiated a new design- era at GEBA. With the new GPS 200 ASW we matched the challenge, to keep on perfektioning this extraordinary line of products, not only optically but also technically. Now you increase your yield and profit with computer-controlled adjustment (ASW) of the slice thickness and the cutting angle.

Electric metal hand saw, extra-low voltage tool BAIER EHS 1 0,42 KW 42 V 1AC 50 Hz speed: 110 rpm saw blade diameter: 175 mm Cutting range: 50 mm mount saw blades: Ø 32 H7 used, tested ! Dimensions ( without cable ): 570 x 190 x 150 mm

Pneumatic metal saw, pneumatic saw, metal hand saw SPITZNAS, BAIER DHS 1 99037 saw blade diameter: 175 mm cutting range: 50 mm mount saw blades: Ø 32 H7 with claw coupling used, tested ! Illustration may differ ! Dimensions: 570 x 190 x 130 mm

Electric Metal Handsaw BAIER EHS 700 0,8 KW speed: 124 rpm saw blade diameter: 175 mm cutting range: 50 mm saw blade holder: Ø 32 H7 230 V 1AC 50 Hz used, tested ! Dimensions ( without cable ): 460 x 230 x 130 mm

Equipment trolley for cutting machine, fish slicer GEBA GPS 200 (Röscher) Dimensions LxWxH approx. 120x65x97cm, weight approx. 44kg, only trolley without accessories, used, good condition