used ATLANTIC AT

Type / type: ATSL 3013 Fabr./ make: Atlantic Year of construction/ year: 1992 Stock number: 0969 Sheet thickness with largest sheet width/ thickness at max. cutting length: 13 mm ( mild steel ) 6 mm ( stainless steel / high grade steel) Cutting length: 3050 mm Weight/ weight: approx. 8.6 t Specification: Backstop

sheet width: 3050 mm plate thickness: 12 mm distance between columns: 3100 mm table height over floor: 900 mm cutting angle adjustment: 0,5 - 3 ° no. of strokes: 6 - 13 Hub/min back stop - adjustable: 1000 mm down holder: 18 St oil volume: 350 l total power requirement: 22,5 kW weight of the machine ca.: 8 t dimensions of machine L x W x H: 3,96 x 2,38 x 2,22 m Accessories: electr. back gauge, spare knives The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mm plate thickness: 6 mm distance between columns: 3100 mm back stop - adjustable: 750 mm cutting angle adjustment: 0,5 - 3,0 ° no. of strokes: 9 - 17 Hub/min table height over floor: 775 mm total power requirement: 7,5 kW weight of the machine ca.: 4,5 t dimensions of machine L x W x H: 3,75 x 1,65 x 1,7 m Accessories: electr. back stop, angle front stop, table extensions, spare knives The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm cutting angle: 0.5 - 3.0 ° down holder: 18 Stück no. of strokes: 9 / 14 Hub/min back stop - adjustable: max. 750 mm Control: konv. engine output: 10.0 kW weight: 4800 kg range L-W-H: 3750 x 1600 x 2450 mm ** maintained condition (!!) Furnishing: - electro-hydraulic / slide-guided sheet metal shears - front control panel, left - easy to use - with electro-hydraulic cutting angle adjustment - with manual cutting gap adjustment, from the rear - electro-motorized back gauge 10-750 mm - with analogue position display + handwheel for fine adjustment - 1x robust side stop - 1x freely movable foot switch - front finger/encroachment protection - 2x EMERGENCY stop buttons at the front - User manual (PDF) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mm plate thickness: 6 mm rear stop: 750 mm cutting angle: 0,5 - 3,0 ° down holder: 18 Stk no. of strokes: 9 - 17 Hub/min oil volume: 200 l total power requirement: 7,5 kW dimensions of the machine ca.: 3750 x 1650 x 1700 mm weight: 4500 kg Furnishing: - electric back gauge 750 mm - front support plates with ball rollers - Light barrier behind the machine - Hydraulic cutting adjustment - Cutting gap regulation via handwheel - LED cutting edge lighting - 1x side stop with scale 1500 mm - 1x freely movable foot switch - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3000 mm, 6 mm

Side stop 1000 mm, motor backgauge, with fine adjustment by handwheel, foot switch Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 3000 mm Sheet thickness steel: 6.0 mm Sheet thickness aluminium: aluminium 4.0 mm Sheet thickness stainless steel: 4.0 mm Colour: grey Total power requirement: 32 A Machine weight: 4500 kg Dimensions: 3800 x 1650 x 1600 mm Cutting gap adjustment manual Holddown autom.: 18 pieces Stroke rates per minute: 17/9 stroke/min with cutting angle adjustment without projection Adjustable back gauge: 750 mm Machine number: 802918

sheet width: 3050 mm plate thickness: 12 mm rear stop: 1000 mm cutting angle: 0,5 - 3,0 ° down holder: 18 Stk no. of strokes: 7 - 14 Hub/min oil volume: 350 l total power requirement: 22,5 kW dimensions of the machine ca.: 4200 x 2000 x 2250 mm weight: 8500 kg Furnishing: - electric back gauge 750 mm - front support plates with ball rollers - Light barrier behind the machine - Hydraulic cutting adjustment - Cutting gap regulation via handwheel - LED cutting edge lighting - 1x side stop with scale 1500 mm - 1x freely movable foot switch - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mm plate thickness: 13.0 mm thickness at Niro-steel: 6.0 mm cutting angle: 0.5 - 3.0 ° down holder: 18 Stück no. of strokes: 9 - 17 Hub/min back stop - adjustable: max. 1000 mm Control: konv. work height max.: 930 mm engine output: 22.0 kW weight: 8000 kg range L-W-H: 4150 x 2020 x 2240 mm Equipment: - electro-hydraulic / slide-guided sheet metal shears - front control panel, pivoting - front left - with electro-hydraulic cutting angle adjustment - with manual cutting gap adjustment, adjustable from behind - electro-motorized rear stop 10-1000 mm * 2x stable guide arms (with guides and drive spindle) * stop rail adjustable in parallel * with analog position display + handwheel for fine adjustment * display on a counter up to 0.1 mm - 1x side stop - 1x freely movable foot switch - front finger guard - operating instructions (PDF) The data for this ad was created with ...

plate length: 3050 mm work height max.: 770 mm engine output: 7,5 kW Power supply: 380 V, 50 Hz Dimensions (HxWxD): 1575x1650x3640 mm weight: ca. 4,5 to Cutting Length max.: 3050 mm true cutting angle adjustable: 0,5 - 3 Grad down holder: 18 Stk. no. of strokes: Schnittw. min/max 17/9 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraul. Table scissors, used, ready for demonstration under electricity       hydraulic plate shearer, used , under power, ready for operation Type: XTSL 3016 Fabr./ make : Atlantic Year of construction/ year: 1993 Sheet thickness with the largest sheet width/ thickness at max. cutting length: 16 mm ( structural steel / mild steel ) 12 mm ( stainless steel / high grade steel) Cutting width/ cutting length: 3100 mm Weight/ weight: approx. 14 t Specification: Rear stop / backstop

Sheet thickness: 13,00 mm Sheet width: 3000 mm Depth rear gauge: 1000 mm Guillotine Atlantic - XTSL 3013 MACH-ID 7122Make:AtlanticType:XTSL 3013Control:Robosoft SC5Year:1994 Control Robosoft SC5 Maximum sheet thickness13 mm Backgauge stroke X in mm1000 mm

Sheet thickness: 13,00 mm Sheet width: 3000 mm Depth rear gauge: 1000 mm Guillotine Atlantic - XTSL 3013 MACH-ID 7122Make:AtlanticType:XTSL 3013Control:Robosoft SC5Year:1994 Control Robosoft SC5 Maximum sheet thickness13 mm Backgauge stroke X in mm1000 mm

4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block -Spare part: hydraulic control block comes from an Atlantic press brake type: HPT 13536 -Manufacturer: Rexroth -Valve type: S-4WE 10 F32 CG24/9Z4 C -Manufacturer: Sauer Sundstrand -Valve type: D24 SWH-G02-B2- -20 -Voltage: V -Pressure max: bar -Price: for all 5 pieces of valves -Dimensions: 600/700/H600 mm -Weight: 67 kg

Hydraulic pump, oil pump, gear pump, press brake, folding bench, folding machine, hydraulic punch, hydraulic punch -Spare part: Hydraulic pump from Atlantic press brake type: HPT 13536 -Manufacturer: Eckerle -Pump type: 1PF2GH3-12/013RE07MU2 -Drive: Loher type 132M-4 -Power: 7.5 kW 1440 rpm -Dimensions: 800/370/H300 mm -Weight 98 kg

sheet width: 3050 mm plate thickness: 6.0 mm cutting angle: 0.5 - 3.0 ° down holder: 18 Stück no. of strokes: 9 / 14 Hub/min back stop - adjustable: 750 mm Control: SC7p engine output: 10.0 kW weight: 4800 kg range L-W-H: 3750 x 1600 x 2450 mm ** from a maintenance workshop ** well maintained condition - checked annually (!!) Furnishing: - electro-hydraulic sheet metal shears - backdrop-guided - ATLANTIC NC control unit - model SC7p * Target / actual information about the motorized back gauge * Manual positioning possible via handwheel * Digital display for backgauge position * electro-hydraulic cutting angle adjustment * Adjustable retraction from the back gauge before the start of the cut * Front left control unit - electro-motorized back gauge 10-750 mm - manual cutting gap adjustment, from the rear - 1x front side stop, with mm scale - 3x front support arms - 1x freely movable foot ...

ATLANTIC HPA 30-135 / Good condition under power -Compressive force 135 tons -Bending length 3050mm -Passage between the uprights 2550mm Gxb82Nm -Complete upper beam/tools & separate segments in different lengths -Two matrices -Motorized height adjustment -Manual backgauge -Front support 2x -Foot switch / hand switch -Ready for demonstration under power Dimensions: LxWxH 4x1.8x2.4Meter / Weight approx. 8.5 tons

Hydraulic guillotine shear model Atlantic 3012 very good condition. - Year of manufacture - 1990. - Length of the cut sheet - 3000mm. - Max cutting thickness 12mm - The machine is equipped with an automatic bumper. - The machine has 1 set of spare original knives. - Weight 8000 kg.

pressure: 200 t chamfer lenght: 4100 mm distance between columns: 3150 mm stroke - stepless adjustable: 200 mm column arm: 300 mm table height: 1090 mm dayligth: 450 mm working feed: 9,0 mm/sec return speed: 80,0 mm/sec Control: NC ATL 550 hydraulic: 265 bar voltage: 380 V total power requirement: 18,7 kW weight: 15000 kg range L-W-H: 4400 x 1900 x 3000 mm - in checked condition - machine video - https://www.youtube.com/watch?v=TKU6owBhDh8 Furnishing: - NC controlled hydraulic press brake, with torsion shaft - with ATLANTIC NC control ATL 550 * Positioning of backgauge ( X ) * Depth setting positioning ( Y1+Y2 ) * Possibility of programming different programs * Storage capacity max. 200 programs - max. 400 sentences * Pivoting control panel, front left - electric backgauge, on ball screws * with 2 stop fingers, manually adjustable - manual table crowning, with analogue display * Adjustme ...

* General * SKU347W893 * LocationBarneveld * MakeAtlantic Zeiser * TypeLota System * Mach.No.AZ09021000-B0803 * Specified Features - Miscellaneous * Motor5 KVA, 400 volt * Information * Year of construction2011 * Total height2,0 m * CEcheck * Floor space1,20x1,20 m * Weight370 kg * Extra SpecificationsWith Omega print head, type 36i, : Adventech touchscreen control, Electronic control System, cool unit, 2100 watts, : rubber belt conveyor, dimensions 1130x60 mm : Cam reader. with electrical cabinet( as is) MiscellaneousAtlantic Zeiser Laser PrinterMiscellaneous > MiscellaneousBrand > Atlantic Zeiser Laser Printer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machi ...

Force of pressure: 400 tons of working width: 4100 mm clear stand width: 3150 mm stand projection: 330 mm Electr. Supply: 400 V, 37 kW weight: 25 tons of space: 4100 x 2300 x 3910/530 mm

Capacity 5050 x 150 tons Cybelec DNC70 control Adjustable back gauge Including tool set Machine just arrived, more photos on request

pressure: 230 t chamfer lenght: 5000 mm distance between columns: 4050 mm : 800 mm : 500 mm : 300 mm : 600 mm : BC 45 Grafik : 18,7 kW : 22,0 t : 6,0 x 2,2 x 3,75 m - 4 stop fingers - Crowning device - Adjustment of the finger height manually via crank 140 mm - Groove in the front of the table - various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Various high-quality grinding wheels DM= 220mm, width 30 + 40mm, open-pored grain size 80 - 100- 120. Can be used for JUNG with bore dm 76.2mm, intermediate ring made of aluminium dm 76.2/50.8mm available.

The Digiline Label Offline system makes it possible to pre-produce and serialize (pharmaceutical) labels quickly, abrasion-resistant and process-safe. In this way, the serialization process is decoupled from the dispensing process in terms of time and space. Machine incl. PLC OMRON. Output: 60 m/Min.

Compressive force: 135 t Working width: 4100 mm Clear stand width: 3150 mm Stand projection: 250 mm max. installation height: 310 mm Working speed: 7 mm/sec Return stroke speed: 50 mm/sec electr. Connection: 400 V, 11 kW Bcyhrjh9qri Weight: 10.8 t Space requirements: 4250 x 1800 x 2400 mm