used AVERMANN KGB

used conveyor belt Manufacturer: AVERMANN Type: Chain conveyor belt Year of construction: submitted technical data: Conveyor width: 1,800 mm Axle distance: approx. 10,000 mm Installation according to photos. Subject to errors in the technical data!

used press container Manufacturer: AVERMANN Type: MPC 10 Year of construction:? specifications: Pressing force: 38 t Drive power: 5.5 kW ? Capacity: 10 m³ Machine weight: 3,000 kg

automatic baling press Manufacturer: Avermann Type: AVOS 1810-5-74/100 Built: 2011 Engine hours: approx. 13,685 h technical data: Pressing force: 100 t Operating pressure 320 bar Filling opening: 1,800 x 1,000 mm Channel format: 1,100 x 700 (W x H) Drive power: 1 x 45 kW + 1 x 30 kW, Total connection power: 105 kW, Hedging: 200 A fully automatic binding 5-fold vertically, Throughput: at 30 kg/m3: approx. 9.0 t/hour at 50 kg/m3: approx. 13.0 t/hour at 100 kg/m3: approx. 20.0 t/hour Bale weights up to approx. 800 kg Oil tank volume: approx. 2,000 Ltr. Transport dimensions: approx. 11,200 x 2,355 x 2,700 mm Machine weight: approx. 23.0 t Machine will be dismantled in January 2021. Subject to errors in the technical data!

Bale size (W x H) approx. 1,100 x 700 mm Bale weight approx550kg

Automatic Channel Baler Manufacturer: AVERMANN Type: AVOS 1211-15/50 Year of Make: 2015 Operating hours: approx. 2,850 h specifications: Press force: 50 t Specific pressing force: 6.49 kg/cm² Drive power: 15 kW Total connected load: 22 kW Throughput: at 35 kg/m³ bulk density: 2.7 t/h at 60 kg/m³ bulk density: 4.7 t/h at 100 kg/m³ bulk density: 6.5 t/h Filling opening: 1,200 x 1,100 mm Channel format: 1,100 x 700 mm Bale weight: up to approx. 400 kg Machine weight: approx. 8,500 kg

1 gebr. hydraulic tilting table Fabr. Avermann, Shell size: 10 x 4 m 1 side upstand: 15 cm Steel decking flat and level Fair-faced concrete production incl. heating coil and vibrator

Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410 BS-22/50 Year of construction 2023 Pump operation hours 1,851 hours, as of July 24 Press power main press 70 t (a 70 tonne hydraulic cylinder is installed, special equipment) Specific press force 90,9 N/cm² (a 70 tonne hydraulic cylinder is installed, special equipment) Feed channel 1,400 x 1,000 mm Theoretic cycle time 13 sec Theoretic throughput capacity 266 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 22 kW Connected load 65 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 5,5 t/h bulk weight of 50 kg/cbm approx. 7,5 t/h bulk weight of 100 kg/cbm approx. 9,7 t/h Bale weight with a bale length of approx. 1.2 m up to 500 kg, depends on material SPS controller Siemens S7-1500 Operating panel Schneider Harm ...

Year of Manufacture: 1998 Manufacturer: Avermann Application: Bulky Waste Sorting System Components: - Feed Conveyor - Inclined Conveyor - Connection Conveyor with Substructure - Magnetic Separator with Substructure - Catwalks - Stairs - Platforms - Emergency Descent Ladders - Sorting Conveyor - Sorting Cabin with Substructure - Heating and Ventilation System - Discharge Conveyor - Electrical Control - Dust Extraction System Find more here - / Contact us at -

Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 20,536 hours, as of September 2024 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resis ...

3-way row drilling machine make KNUTH type KGB 25Year of construction 1996Technical specifications:max.drilling capacity in steel: 25 mmTapping capacity: M 16Spindle mount: MK 3Quill stroke: 150 mm3 spindle speeds: 100 - 2900 rpm.Projection: 225 mmDistance spindle - table: 15 - 470 mmTable L x W: 1300 x 295 mmDrive power: 0.75 kW / 380 VDimensions approx .: 1600 x 800 x 1900 mmWeight approx: 750 kgwith- 3 drill headsusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Corrugated pipe, plastic hose, empty pipe -KG Pipe: Bend 15° KG 2000 Polypropylene 4 pieces -Type: KGB DN 110x15° -Nominal diameter: 110 mm / inner diameter 104 mm -Delivery/Price: complete -Dimensions: Ø 130 x 190 mm -Weight: 0.4 kg/piece

Ball bushing linear guide, open linear bearing unit INA KGB0 2558 PP ( KGB02558PP ) Diameter: Ø 25 mm Base: 81 x 29 mm hole spacing: 68 mm Material ( housing ): Aluminum New ! Dimensions: 81 x 58 x 54 mm

Bread weigher Dough weigher GlimekManufacture : GlimekModel : SD 180400 Volt , 50 Hz , 1.1 kW Approx. 500 KgBakery conditionDetails see picture

Floor cleaning machine make NILFISK-ALTO type Scrubtec R 586Code 00311E ser. -No: EB2511 year 2007Cleaning width: 860 mmTank volume: 110 lArea / theor. / Prak.:5680 / 3980 m² / h.Brush print: 0 - 102 kgBrush speed: 300 rpm.Brush size: 2 x 430 mm Drm.Drive power: 450 WBrush motor: 1850 WWorking speed: 4.0 km / hDrive system: battery 36 VWeight approx .:540 kgOutside dimensions approx: 1664 x 899 x 1260 mmvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Laser cutting system make LSS LASER LAB type CONTOUR 3015/ 020 SLABTechnical specifications:Cutting area: 3000 x 1500 mmLaser source :Rofin-Sinar Laser DC 020- Output Power Range / Guaranteed:200 - 2000 W/ 2000 W- Performance stability:+- 2% (24h)- Laser beam quality Drm. : < 25mm- Beam index: K > 0.8- Pulse generator, pulse frequency: 0 or 8 - 5000 Hz Pulse Width: 26ms-CW- Laser gas: Rofin-Sinar special premix Consumption: < 0.3 Nl/hCutting capacity (according to the LSS company) approx. :10 - 12 mmRapid traverse: 10 m/min.programmable Z axis: 175 mmHigh-pressure cutting up to:20 barBeam data: 10.6 kgBeam quality: 20 - 25 mm K09Directional Stability: 0.15 mrad.Polarization linear:45°Pulse characteristics: 2 - 5000 HzLaser gas: 0.15 NL/h.Laser head dimensions: 1700 x 800 x 853 mmWeight laser head approx.: 500 kgDimensions control cabinet: 800 x 600 x 1900 mmWeight control cabinet approx ...

Metal lathe make WMW Karl-Marx-Stadt type DLZ 355 x 1600Fabr. -No: 2410/60, built in 1960Technical specifications:Technical specifications:Turning length: 800 mmCircumferential diameter over bed: 355 mmCenter height: 180 mmSpindle bore: 35 mmTailstock tip taper: Morse 4Quill shift by hand: 140 mmTailstock shift of the upper part from the central position: 10 mmWorkpiece weight between the steadies: 630 kgbetween the tips: 400 kg18 spindle speeds: 18 - 2500 rpm16 feeds length: 0.071 - 1 mm / rev16 cross feeds: 0.036 - 0.5 mm / revmetric thread 16: 0.5 - 7 mmInch thread 28:60 - 4 turnsModule thread 1 0.25 - 3.5Main drive: 5.8 kWExternal dimensions: 2200 x 1060 x 1225 mm highWeight: 1900 kgWith- three-jaw chuck- Steel holderused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding.  ...

Motorized reel make KEMMERICH type V 5Year of construction 1974Technical specifications:Load capacity: 500 kgBelt width max.: 300 mmMax Size: 1200mmDimensions approx.: 1010 x 1500 x 1600 mmWeight approx.: 150 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized reel make RASTER type 4 VAR/KMachine -No: 5612/5 built in 1985Technical specifications:Load capacity: 300 kgBelt width max.: 200 mmCoil diameter: 800mmApprox. weight: 320 kgDimensions approx.: 1020 x 1000 x 1460 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Bread Weigher Dough Weigher GlimekManufacture : GlimekModel : SD 92Weigher Weight 200g to 2000g400 Volt , 50 Hz , 1.1 kW Approx 500 KgBaker ConditionDetails see picture         

Chain hoist with electric chassis, trolley PFAFF SILBERBLAU Type PL10 2004B1 Capacity: 2000 kg Lifting height: 3,3,000 kgbr /br /lifting height: 3,000 kgbr /br /lifting height: 3,3,2004B1br /br / 0 m Lifting speed: 4 / 1 m/min Electric chassis type CHM20 Travel speed 20 m/min 1.75 / 0.45 kW voltage: 400 V 3AC, 50 Hz IP55 used, tested ! Dimensions ( without cable ): 650 x 450 x 730 mm

ID2950 Supra Schaltische/scarf tables 67 Avermann tables Wachenroth (Supra) 2.40 m formwork width 2.70 m total width 10.50m length 5 cm upstand 60 cm total height 24 cm smallest distance when stacking (max. occupancy approx. 15 tons) 67 Avermann Tables Wachenroth (Supra) 2.40 m formwork width 2.70 m overall width 10.50 m length 5 cm backsplash 60 cm total height 24 cm smallest distance when stacking (max. occupancy approx. 15 tons.)

* General * SKU225U166 * LocationBarneveld * MakeVan Dijk procestechniek * TypeH-11 * Main Features * MaterialStainless steel * Motor0.16 KW * Inlet diameter800 mm * Specified Features - Bag dump station * MaterialStainless steel 1.4305 (303), Stainless steel 1.4301 (304) * Bag dump stations * Capacity± 245 Ltr. * Hopper sizes800x900x800 mm * Inlet830x430 mm * Outlet200x200 mm * With vibro motorcheck 0,16 kW, 230/400 volt * Information * Mounted on legscheck * Floorspace0,9x1,14 m * Total height1,6 m * Weight170 kgBag dump stationsVan Dijk ProcestechniekDosing units > Bag dump stationsBrand > Van Dijk Procestechniek What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more mac ...

* General * SKU332T896 * LocationBarneveld * MakeNetsch * Typeunknown missing type plate * Main Features * MaterialStainless steel * Volume1000 Ltr. * Motor55 KW * Specified Features - Butterfly mixer * MaterialStainless steel, Stainless steel 1.4301 (304) * Butterfly-mixercheck * Shaft length900 mm * Butterfly diameter1100 mm * Motor55 kW * With panscheck (4x) * Capacity1000 Ltr. * Pan sizesdia. 1200x900 mm * With hydraulic liftingcheck * Information * With switchgearcheck * Floorspace1,6x2,5 m * Total height2,6 m * Weight3200 kgButterfly mixersNetzschMixers > Butterfly mixersBrand > Netzsch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

* General * SKU316S1049 * LocationBarneveld * MakeJ-Tec * Typeunknown missing type plate * Main Features * MaterialStainless steel * Volume1065 Ltr. * Specified Features - Bag dump station * MaterialStainless steel * Bag dump stations * Silodosing system * Closedcheck * Capacity± 1065 Ltr. * Sizesdia. 800x1800 mm * Diameter800 mm * Cylindrical height1800 mm * Conical height1000 mm * Conical bottomcheck * Flat topcheck * With covercheck * Inlet720x520 mm * Outlet with valvecheck (rotating valve: 0,55 kW 230/400 Volt:) * Outletdia. 240 mm * Information * Floorspace1,2x0,8 m * Total height3,4 m * Weight350 kgBag dump stationsJ-Tec Material HandlingDosing units > Bag dump stationsBrand > J-Tec Material Handling What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to insp ...

* General * SKU316S536 * LocationBarneveld * MakeJ-Tec * Typeunknown missing type plate * Main Features * MaterialStainless steel * Volume1065 Ltr. * Specified Features - Bag dump station * MaterialStainless steel * Bag dump stations * Silodosing system * Closedcheck * Capacity± 1065 Ltr. * Sizesdia. 800x1800 mm * Diameter800 mm * Cylindrical height1800 mm * Conical height1000 mm * Conical bottomcheck * Flat topcheck * With covercheck * Inlet720x520 mm * Outlet with valvecheck (rotating valve: 0,55 kW 230/400 Volt:) * Outletdia. 240 mm * Information * Floorspace1,2x0,8 m * Total height3,4 m * Weight350 kgBag dump stationsJ-Tec Material HandlingDosing units > Bag dump stationsBrand > J-Tec Material Handling What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspe ...