Category: 107 sheet metal working / Three-roll plate bending machines
Latest update: 10.12.2024 add to watchlist
approved
dealer
item-No.: 156326626

used

check Seller: Bästlein Gebrauchtmaschinenhandel GmbH
Location: Werk Land-de

add to watchlist

sheet width: 3100 mm plate thickness: 6 mm pre-bending: 5 mm upper roll diameter: 200 mm min. bending diameter: Ø 300 mm bending speed: 5 m/min total power requirement: 5,5 kW weight of the machine ca.: 4.000 kg dimensions of the machine ca.: 4800x1300x1270 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 107 sheet metal working
Latest update: 10.12.2024 add to watchlist
approved
dealer
item-No.: 156326674

new

check Seller: Bästlein Gebrauchtmaschinenhandel GmbH
Location: Günzburg Land-de

add to watchlist

sheet width: 2050 mm plate thickness: 4,5 mm pre-bending: 4,0 mm min. dia.: 210 mm roll diameter: 140 mm weight of the machine ca.: 1530 kg dimensions of the machine ca.: 3220x1200x900 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 107 sheet metal working
Latest update: 10.12.2024 add to watchlist
approved
dealer
item-No.: 156326802

new

check Seller: Bästlein Gebrauchtmaschinenhandel GmbH
Location: Günzburg Land-de

add to watchlist

sheet width: 1250 mm plate thickness: 5,5 mm pre-bending: 5,0 mm roll length: 1280 mm min. dia.: 210 mm roll diam. toproll: 140 mm weight: 1365 kg range L-W-H: 2.020 x 900 x 1.200 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 107 sheet metal working
Latest update: 10.12.2024 add to watchlist
approved
dealer
item-No.: 156797289

new

check Seller: A+B Werkzeug Maschinen Handels GmbH
Location: Ahaus Land-de

add to watchlist

sheet width: 1250 mm plate thickness: 5,5 mm pre-bending: 5,0 mm roll diam. toproll: 140 mm min. dia.: 210 mm engine output: 2,2 kW turning speeds: 5,7 U/min weight: 1365 kg range L-W-H: 2.020 x 900 x 1.200 mm Furnishing: - 2 central rollers driven by an electric motor - Upper beam can be swiveled out - Conical bending device - foot switch - self-braking main engine - CE mark / declaration of conformity including special equipment: - Motorized rear roller adjustment - hardened rollers - digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 107 sheet metal working
Latest update: 10.12.2024 add to watchlist
approved
dealer
item-No.: 156797547

new

check Seller: A+B Werkzeug Maschinen Handels GmbH
Location: Ahaus Land-de

add to watchlist

sheet width: 2050 mm plate thickness: 4,5 mm max. plate thickness: 4,0 mm anbiegen roll length: 2050 mm min. dia.: 210 mm roll diam. toproll: 140 mm weight: 1530 kg range L-W-H: 3220 x 1200 x 900 mm Furnishing: - Upper and lower roller electr. driven - Upper roller can be swiveled out - Conical bending device - Asymmetrical roller arrangement - self-braking main engine - separate control and operating panel - Safety line - foot switch - Operating instructions in German - CE mark / declaration of conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment - digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 107 sheet metal working / Three-roll plate bending machines
Latest update: 10.12.2024 add to watchlist
approved
dealer
item-No.: 158345551

used

check Seller: Bästlein Gebrauchtmaschinenhandel GmbH
Location: Werk Land-de

add to watchlist

sheet width: 3100 mm plate thickness: 6 mm pre-bending: 5 mm upper roll diameter: 170 mm min. bending diameter: Ø 255 mm bending speed: 4,5 m/min total power requirement: 4 kW weight of the machine ca.: 2300 kg dimensions of the machine ca.: 3800x1100x1130 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 107 sheet metal working
Latest update: 10.12.2024 add to watchlist
approved
dealer
item-No.: 159293398

new

check Seller: Bästlein Gebrauchtmaschinenhandel GmbH
Location: Günzburg Land-de

add to watchlist

sheet width: 1550 mm plate thickness: 4,5 mm pre-bending: 4,0 mm roll length: 1550 mm min. dia.: 190 mm roll diam. toproll: 130 mm weight: 1265 kg dimensions: 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 107 sheet metal working / Three-roll plate bending machines
Latest update: 10.12.2024 add to watchlist
approved
dealer
item-No.: 160004421
New in: 2022

new

check Seller: Heinz Sanders GmbH
Location: D - 49779 Niederlangen Land-de

add to watchlist

: 1550 mm : 4,5 mm : 4,0 mm roll diameter: 140 / 210 mm : 2,2 kW : 1210 kg : 2650 x 900 x 1200 mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 107 sheet metal working / Three-roll plate bending machines
Latest update: 10.12.2024 add to watchlist
approved
dealer
item-No.: 163157363
New in: 2024

new

check Seller: Heinz Sanders GmbH
Location: D - 49779 Niederlangen Land-de

add to watchlist

: 1050 mm : 5,5 mm : 5,0 mm roll diameter: 130 / 195 mm : 2,2 kW : 1050 kg : 2150 x 900 x 1200 mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 107 sheet metal working / Three-roll plate bending machines
Latest update: 10.12.2024 add to watchlist
approved
dealer
item-No.: 163157364
New in: 2024

new

check Seller: Heinz Sanders GmbH
Location: D - 49779 Niederlangen Land-de

add to watchlist

: 2050 mm : 4,5 mm : 4,0 mm roll diameter: 140 / 210 mm : 1,1 kW : 1530 kg : 3220 x 1200 x 900 mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 107 sheet metal working
Latest update: 10.12.2024 add to watchlist
approved
dealer
item-No.: 165478814
New in: 2022

used

check Seller: A+B Werkzeug Maschinen Handels GmbH
Location: Ahaus

add to watchlist

sheet width: 1550 mm plate thickness: 4.5 mm pre-bending: 4.0 mm roll length: 1550 mm min. dia.: 190 mm roll diam. toproll: 130 mm bending speed: 5.3 m/min engine output: 2.2 kW weight: 1360 kg range L-W-H: 2320 x 900 x 1200 mm ** Exhibition machine from 2022 ** with only approx. 2x operating hours ** Condition as NEW ** Special price on request Equipment: - robust electro-mechanical round bending machine - 2x central rollers driven by electric motor (upper & lower roller) - upper roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - lower roller can be adjusted manually, using a handwheel - asymmetrical roller arrangement - self-braking main motor - safety device (safety line with switch unit) - CE mark/declaration of conformity Special equipment included in the price: - hardened rollers - motorized side roller adju ...

Category: 109 other metal working machines
Latest update: 02.12.2024 add to watchlist
approved
dealer
ankerimg
item-No.: 157485873
New in: 1989

used

check Seller: MET-TECH GMBH
Location: 61381 FRIEDRICHSDORF Land-de

add to watchlist

Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm “U” channel from 40x20 and 120x55 mm “T” shape from 30 till 100 mm “T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop

Category: 107 sheet metal working
Latest update: 23.09.2024 add to watchlist
approved
dealer
ankerimg
item-No.: 157837383
New in: 1989

used

check Seller: MET-TECH GMBH
Location: 61381 FRIEDRICHSDORF Land-de

add to watchlist

Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm “U” channel from 40x20 and 120x55 mm “T” shape from 30 till 100 mm “T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop

Category: 109 other metal working machines
Latest update: 11.11.2024 add to watchlist
approved
dealer
item-No.: 119625985

used

check Seller: Frank Sprengel Metallbearbeitungsmaschinen
Location: Land-de
Price: VB 290 € add to watchlist

Reinforced steel scissors Round iron scissors Scissors Manufacturers Muhr and Bender Type 50N/22 and 50N/28 50N/22 intersects at 450N/mm2: Round: 22mm Square 22mm Flat: 35x10mm 50N/28 intersects at 450N/mm2: Round: 28mm Square 24mm Flat: 40x15mm Both machines new and ovp Special price

Category: 107 sheet metal working
Latest update: 11.11.2024 add to watchlist
approved
dealer
item-No.: 119626183

used

check Seller: Frank Sprengel Metallbearbeitungsmaschinen
Location: Land-de
Price: VB 195 € add to watchlist

Hand lever plate and profile steel shears heavy and stable outing cuts sheets, round steel (approx. 15mm), flat steel and T-profiles Mounted on base Special price

Category: 109 other metal working machines / Bending Machines
Latest update: 24.11.2023 add to watchlist
approved
dealer
item-No.: 162859372
New in: 2006

used

check Seller: GINDUMAC GmbH
Location: 67663 Kaiserslautern Land-es

add to watchlist

BRAND: STAR-BEND YEAR: 2006 MODEL: STAR 800 CN6/GEN/L APPLICATION TYPE: BENDING LOCATION: SPAIN MACHINE TYPE: BENDING MACHINES AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: STAR-BEND MAIN DRIVE NUMBER OF AXIS: 6 Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - MINIMUM INNER BENDING RADIUS (_1) WITH STANDARD SHAFT (Ø 60 MM)

Category: 107 sheet metal working
Latest update: 10.12.2024 add to watchlist
approved
dealer
item-No.: 156326547

new

check Seller: Bästlein Gebrauchtmaschinenhandel GmbH
Location: Günzburg Land-de

add to watchlist

round material: 40 mm tube diameter: 70x2 mm square material: 80x30x3 mm L-beam: 50 x 5 mm I - beam section - flat steel: 80 x 16 mm I-beam section - upend: 50 x 15 mm roll diameter: 157 mm Shaft diameter: 50 mm bending speed: 2,95 m/min total power requirement: 1,1 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: 1000x950x1450 mm Domestic equipments: - Special steel shafts (42CrMo4) hardened and ground - a set of standard rollers - lower rollers up and down hydraulically deliverable - digital display for lower rollers - separate control panel - in one direction manually adjustable lateral straightening rollers - manual lubrication - horizontal and vertical operation - CE mark / Declaration of Conformity - Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 107 sheet metal working
Latest update: 10.12.2024 add to watchlist
approved
dealer
item-No.: 156326554

new

check Seller: Bästlein Gebrauchtmaschinenhandel GmbH
Location: Werk Land-de

add to watchlist

sheet width: 1050 mm plate thickness: 1 mm roll diameter: 56 mm dimensions of the machine ca.: 1600 x 700 x 1050 mm Domestic equipments: - Upper roller can be swung out manually The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 107 sheet metal working
Latest update: 10.12.2024 add to watchlist
approved
dealer
item-No.: 156326558

new

check Seller: Bästlein Gebrauchtmaschinenhandel GmbH
Location: Werk Land-de

add to watchlist

sheet width: 2100 mm plate thickness: 13 mm pre-bending: 10 mm upper roll diameter: 230 mm lower roll diameter: 210 mm side roll diameter: 190 mm total power requirement: 7,5 kW weight of the machine ca.: 4.620 kg dimensions of the machine ca.: 4150x1400x1300 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

Category: 107 sheet metal working
Latest update: 10.12.2024 add to watchlist
approved
dealer
item-No.: 156326559

new

check Seller: Bästlein Gebrauchtmaschinenhandel GmbH
Location: Günzburg Land-de

add to watchlist

bending speed: 2.1 m/min Bending capacity - square: 30x30 mm bending capacity - flat iron: 80x15 mm Bending capacity - flat iron on edge: 50x10 mm tube diameter: 1 oder 60x2 mm Shaft diameter - upper: 35 mm Shaft diameter - lower: 30 mm total power requirement: 0,75 kw range L-W-H: 650 x 500 x 1300 mm weight: 170 kg Standard features: - hardened special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 108 welding machines / Welding Turntables
Latest update: 10.12.2024 add to watchlist
approved
dealer
item-No.: 156326564

new

check Seller: Bästlein Gebrauchtmaschinenhandel GmbH
Location: Werk Land-de

add to watchlist

table diameter: 960 mm table load: 3.500 kg Frontal Loading Center (A): 150 mm Side Loading Center (B): 150 mm Rotating speeds: 0,1 - 0,9 UpM T-slots: 6 x M20 Tilt Angle: 70-90-180 ° Tilting Speed: 30 sn min./90° weight of the machine ca.: 1.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 107 sheet metal working
Latest update: 10.12.2024 add to watchlist
approved
dealer
item-No.: 156326582

new

check Seller: Bästlein Gebrauchtmaschinenhandel GmbH
Location: Günzburg Land-de

add to watchlist

plate thickness: 1,25 mm roll-body distance: 250 mm throat: 260 mm distance between roll centers: 62 mm tool adaptor: 26 mm speed: 6,3 m/min total power requirement: 0,7 kW weight: 170 kg range L-W-H: 1020x600x1500 mm Domestic equipments: - motor driven beading machine - 5 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 107 sheet metal working / Beading Machines
Latest update: 10.12.2024 add to watchlist
approved
dealer
item-No.: 156326590

new

check Seller: Bästlein Gebrauchtmaschinenhandel GmbH
Location: Werk Land-de

add to watchlist

plate thickness: 2,5 mm roll-body distance: 260 mm throat: 500 mm distance between roll centers: 92 mm tool adaptor: 35 mm speed: 3,5 m/min total power requirement: 1,5+0,55 kW weight of the machine ca.: 320 kg dimensions of the machine ca.: 1200x700x1200 mm Domestic equipments: - motor driven beading machine - 3 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 107 sheet metal working
Latest update: 10.12.2024 add to watchlist
approved
dealer
item-No.: 156326593

new

check Seller: Bästlein Gebrauchtmaschinenhandel GmbH
Location: Werk Land-de

add to watchlist

bar material - diameter: Ø 35 mm I-beam section - flat steel: 60x10 mm L-beam: 50 mm tube diameter max.: Ø 60x2 mm square material: 45x45x3 mm roll diam. toproll: 162 mm roll diam. bottom roll: 152 mm Shaft diameter: 50/40 mm turning speeds: 3,3 m/min total power requirement: 1,5 + 0,75 kW weight: 450 kg range L-W-H: 1050x950x1450 mm Domestic equipments: - hydr. Delivery of the top roller - standard roller set - side straightening rollers - Upper roll holder: 50.0 mm - Under roller diameter: 40.0 mm - Control panel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 107 sheet metal working
Latest update: 10.12.2024 add to watchlist
approved
dealer
item-No.: 156326629

new

check Seller: Bästlein Gebrauchtmaschinenhandel GmbH
Location: Günzburg Land-de

add to watchlist

L-beam: 50x5 mm square material: 50x40x3 mm I - beam section - flat steel: 120x15 mm I-beam section - upend: 60x10 mm round material: Ø 35 mm tube diameter: Ø 70x2 mm roll diameter: 155 mm bending speed: 4,3 m/min bore: 50 mm total power requirement: 1,5 kW weight: 400 kg dimensions: 830x730x1350 mm Domestic equipments: - Extended special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working - CE mark / Declaration of Conformity - Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
RESALE used machinery 25 years online