used ABS SCHWABE TS

Punching tool with Linar built-in punching brackets ABS-SCHWABE type 100/160 11 pieces Punching bracket, punching unit Year of construction approx. 1990 Projection: 160 mm Punching capacity: 0.3 to 5 mm Material thickness Hole diameter: 2 to 7 mm Installation height: 203 mm (only the punching bracket individually with punching tool) Installed is a round hole tool ø 5 mm Punching bracket distance: 195 mm - the tool unit was mounted on a hydraulic press brakeDimensions of punching bracket base plate L x W x H: 2500 x 345 x 37.5 mm Dimensions of punching bracket printing plate L x W x H: 2500 x 173 x 20 mm Overall dimensionsL x W x H: 2500 x 345 x 300 Weight: 400 kg Good condition; used

Punching tool with Linar built-in punching brackets ABS-SCHWABE type 100/160 11 pieces Punching bracket, punching unit Year of construction approx. 1990 Projection: 160 mm Punching capacity: 0.3 to 5 mm Material thickness Hole diameter: 2 to 7 mm Installation height: 203 mm (only the punching bracket individually with punching tool) Installed is a round hole tool ø 5 mm Punching bracket distance: 195 mm - the tool unit was mounted on a hydraulic press brakeDimensions of punching bracket base plate L x W x H: 2500 x 345 x 37.5 mm Dimensions of punching bracket printing plate L x W x H: 2500 x 173 x 20 mm Overall dimensionsL x W x H: 2500 x 345 x 300 Weight: 400 kg Good condition; used

Submersible sewage pump manufactured by ABS. AFP10411 M30-4 model.

USED SULZER ABS AFP M40/4 SUBMERSIBLE SEWAGE PUMP

Front broom, front sweeper, roller brush, broom -suitable for: Iseki Hako and other tractors -PTO drive -Three point mounting -hydraulic: swiveling -Broom width: 1200 mm -Own weight: 140 kg

Compressed air tank, pressure vessel, pressure tank, compressed air tank, pressure vessel, compressor tank -Manufacturer: ABS, universal pressure vessel steel from tray sealing machine Inauen VC999/ TS 1200 N -Type: MS190420 -Content: 13.5 l -Dimensions: 435/195/H255 mm -Weight: 3.4 kg

Scaffolding planks used . Stored in a dry place, sorted manually. Ideal for furniture manufacturers

In stock as standard. Small U-head sockets, ideal for special work in crawl spaces and work on window frames. U Head Socket 1.60 Meter new -Retracted length of the screw jack: 1.00 meters. -Extended screw jack length: 1.60 meters. -Stutz is completely galvanized. -Stutz is equipped with finger protection. -Stutz is equipped with an anti-slip device. -With outer tube reinforcement -U-head size: 156x120x80 mm

Description: 3 pcs., see photos for more details Approx. Onsite Dimension. (l x w x h): 800 x 600 x 450 mm, weight approx.: 70 kg

Ribbon system Covema-Schwabe Y.O.M. 1994 User manual with functional overview - Machine control elements - Program overview - Commissioning and storing removal Reel MHM 2 - hydraul. Spreading (motor 1.5 kW / 1500 U) - hydraul. Pressure roller - with drive max. coil weight - 2 t Coil outside through. - 1650 mm Coil inner throughm. - 350 - 460 mm Bandwidth - 400 mm Feed machine VRMA 32/96 Bandwidth 320 mm Straightening roller sifm. - 40 mm, 7 pcs Straightening head can be done by hydraul. to open Intermediate air central. Controller more info on request

Herman Schwabe Die Cutting Shaping Press Mechanical Press Model DG-HD Platen size 770mm x 1000mm Die cut shapes Manual cut / load pressure 4" stroke, 7" bore, 10 H.P. Motor, 415 volts 50 cycles 3 phase 14.84 full load current Made in Brooklyn, New York Serial number 50367 Complete with starter Overall dimensions 1.2m x 1.5m high x 3.3m long

Qty 1 x Schwabenthan 200mm dia x 450mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Jahnel gearbox with 10HP motor to each roll (variable speed), Variable friction ratio/roll speeds, Stainless steel interlocked guards and tray. Complete with electrical controls and in good condition. O/a dimensions 2700 x 1500mm

Qty 1 x Schwabenthan 150mm dia x 350mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Even/friction selectable gear ratios, Motor mounted under frame. Complete with electrical controls and in good condition. O/a dimensions 2400 x 850mm.

Wood milling machine. -8000 RPM. -Brand head: Frommia. -Type: 850. -Incl various cutting heads, for making window frames, among other things.

Key data: 110 mm, 225 mm

Year of manufacture: 1963 / Control system renewed in 1985 Rollers: 225 mm bale width 110 mm diameter Cylindrical, smooth roller bales Temperature control: Chamber-drilled rollers, oil-tempered via rotary union and spray lances Speed: Infinitely adjustable Solid roller: 11 - 63 rpm = 3.8 - 21.8 m/min Adjustment roller: 11 - 63 rpm = 3.8 - 21.8 m/min Friction: Infinitely adjustable Bearing: Bronze Plain Bearing Lubrication: Electric oil circulation lubrication Gap adjustment: Manual with ratchets Material guide jaws: Two-piece with centre centreboard, non-folding Material tray: plastic tray below the rollers, can be pulled out by hand Motor: Two SEW three-phase brake motors with 2.2 kW each, 230/400 V, 50 Hz, 1395 rpm Transmission: Two PIV gearboxes (for speed control) in combination with two JAHNEL helical gearboxes Control: Conventional ...

Key data: 200 mm, 450 mm

Rollers: 450 mm roller width 200 mm diameter Cylindrical, smooth surface Height of the top of the roller to the floor: 1340 mm Roller temperature control: water-cooled, spray lances in both chamber-drilled rollers, Without temperature control unit Speed: Infinitely adjustable via frequency converter Adjustable roller: max. 28 / 24 rpm = 17.6 / 15.1 m/min Fixed roller: max. 34 rpm = 21.3 m/min Friction: Switchable friction (switchable by lever) 1:1.2 and 1:1.4 Roller bearings: Bronze plain bearings Bearing Lubrication: Oil Circulation Lubrication Gap adjustment: Manual manual adjustment by ratchet; Separate setting for right and left side Gap Indicator: Mechanical Analog Dial Gauges Material wiper jaws: Two-piece metal wipers; not foldable • Strippers move with the adjustable roller when adjusting the roller gap and are therefore always in ...

Key data: 150 mm, 450 mm

Power supply Voltage V 380 Type of current three-phase current Frequency Hz 50 Amperage A 30 Connected load kW 18 Electrical fuse A 63 Cooling water requirement 1/min 10 Characteristics Roller diameter mm 150 Roller width mm 450 Working width mm 350 Batch volume dm³ 1 Drive Rear roller speed 1/min 20 Speed front roller 1/min 10 - 20 Friction 1 : 2 Drive torque Nm 2000 Drive power kW 8.0 Heating Surface temperature °C up to 220 Heating type: electric Heating capacity per roller kW 5.5 Total heating capacity kW 11.0 Temperature Control Electronic Controllers with recirculation Switching behavior PID Temperature Sensor Resistance Thermometer PT 100 Dimensions Machine length mm 1600 Overall length (incl. water connection) mm approx. 2000 Machine width mm 750 Machine height mm 1600 Working height mm 1200 Work surface requirements m x m ...

Key data: 110 mm, 350 mm

Year of Make: 1990 Make No.: 6439 Rollers: 350 mm roller width 110 mm diameter - Cylindrical, smooth surface - Height of the top of the roller to the floor: 1200 mm Roller temperature control: Electrically heated up to 300°C via electric heating rods; - Water-cooled via new spray lances and NEW rotary unions in both rollers; - Without temperature control unit Speed: Infinitely adjustable via frequency converter Adjustable roller: max. 22.5 rpm = 7.8 m/min Fixed roller: max. 27 rpm = 9.3 m/min Friction: Switchable friction ratio (friction or synchronization) - 1 : 1.2 or 1 : 1 Roller bearings: Bronze plain bearings Bearing Lubrication: Oil Circulation Lubrication Gap adjustment: Manual manual adjustment by crank - Parallel adjustment of both sides Gap Indicator: Mechanical Analog Dial Gauge Material wiper jaws: One-piece metal scrapers - Manu ...

Key data: 300 mm, 750 mm

Year of manufacture: 1991 / 2023 revised by DEGUMA Make No.: 6552 Rollers: 750 mm roller width, 650 mm working width 300 mm diameter Cylindrical, smooth surface Working height: 1350 mm Note: on the roller bales there are several traces of indentation of screws Roll gap: 0.5 – 25 mm Rear roller speed: 2 – 26.5 min-1 Friction: switch for synchronization and fixed friction 1 : 1.82 Gap adjustment: electric gap adjustment Gap display: digital Material wiper jaws: 2-piece steel wiper jaws, foldable Surface temperature Roller: up to 220 °C Heating type: electric Heating capacity per roller: 18 kW Temperature control: electronic regulator with feedback Temperature sensor: RTD PT 100 Roller cooling: medium water, connection inlet Dmr. 12 mm, connection outlet Dmr. 22 mm, water pressure approx. 4 bar New rotary unions, without temperature contr ...

sheet width: 150 mm coil weight: 80 kg coil external diameter: 650 mm : 1000 mm diameter of the mandrel: 230 - 445 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Schwabedissen DAZSa23 double-end profiler is available. Working width min./max.: 400mm/1250mm, chain track-cam distance: approx. 405mm, external dimensions at max. working width: approx. 3100mm/2800mm. The machine has 4 swivel motors on each side. On-site inspection is possible.

material width: 400 mm material thickness: 0,4 - 5,5 mm feed length: mm roll diameter: 160 mm speed: 120 m/min weight max. in kg: 50/180 kg total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double end tenoner Schwabedissen Type: DAa 200 Working width 1000 mm 3 motors per side: Saw 8.3 kW swivel Milling machine 4.5 kW swivel Milling machine 4.5 kW swivel Chain track with cam spacing 380 mm Lower chain projection 500 mm External dimensions 3600 mm x 2340 mm

length of reeling-pattern: 99 internal dia. of stator: 99 packet hight: 99 mm Diameter: 99 mm Number of teeth: 99 St. Width of teeth: 99 mm Bore: 99 mm Control: 99 total power requirement: 99 kW weight of the machine ca.: 4 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 4.5 kW 2900 rpm at 50 Hz -Power: 6.3 kW 5900 rpm at 100 Hz -Voltage: 220/380 volts -Mounting shaft: Ø 35 mm -Tool: Ø 200 mm -Dimensions: 650/250/H160 mm -Weight: 53 kg