english language
Resale Logo

Category 307: rubber machines

back back

177 used rubber machines

used machinery sale offers sorted by date

Go to the full result list of the category:
with sub-categories, search word input, manufacturer search and more machines
Date Photo Machine Year Price Country No.
page 1 >
13.02.2017 Stempelkneter WP GK-13 S
Stempelkneter W&P GK-13 S
Stepelkneter GK-13 S, make Werner & Pfleider Stuttgart, ca. 80 kg Batsch, hydraulically operated front wall drain, drive 90 KW, 380 spend, 50 Hz, with complete second Exchange machine, drives and spare parts
 
   
  DE   76391072
13.02.2017 Press SENNERSKOV 350ton
Press SENNERSKOV 350ton
Sennerskov Press The platens are chamber platens for steam heating, not drilled Closing force 350 tons 9 x rams 139.5 mm each 200mm daylight Platen 3350 long x 2030mm wide
 
ON  
offer is possible  
  UK   76390787
13.02.2017 Rubber Slitter MERKLE Merkle Slitter
Rubber Slitter MERKLE Merkle Slitter
Merkle Slitter Cutter 500mm wide
 
ON  
offer is possible  
  UK   76390778
09.02.2017 RUBBER MIXER AIR EXTRACTION UNIT ARMATEC ENVIRONMENTAL LTD Venturi Scrubber system
RUBBER MIXER AIR EXTRACTION UNIT ARMATEC ENVIRONMENTAL LTD V
System to run 2 x Bambury 11D mixers through one Venturi Scrubber system. Machine Ex South Pacific Tyres Ltd New Zealand. The Complete system significally reduces carbonaceous emissions from the bambury mixers. Fan motor 260 kw with starter complete with stack and flume to mixers. All controls. Drawings and Manuals with unit. This Stack unit has been Fibre glassed Silenced. Height 3.6 mtrs and has passed all tests. Flume (Stack) from ground level 22000mm in 4 sections. More Photos and Tech available. Price FOB - New Zealand ...
 
152,000 NZ
offer is possible  
  NZ   75525803
03.02.2017 Autoclave SCHOLZ Autoclave Steam
Autoclave SCHOLZ Autoclave Steam
Scholz Autoclave Made in Germany. Autoclave has 12 connections. Year of production: 1989. The autoclave includes: vacuum system, monorail and envelope spreader. The equipment is in mint condition (like new). Inside diameter 1580mm, but useful diameter is 1270mm (monorail) Overall length= 5800mm Control panel
1989
ON  
offer is possible  
  UK   73439309
21.02.2017 Rolling mills DOZAMET WG 650 x 2100mm
Rolling mills DOZAMET WG 650 x 2100mm
2 Roll mill for rubber Dozamet 650 x 2100mm, motor 160kW, roll gap adjustment motorized, large gearbox ZAMECH Elblag. Year of production 1983. Weight 35 tons.
 
19,900 €  
  PL   73439140
13.02.2017 Laboratory Mill FARREL Laboratory Two Roll Mill
Laboratory Mill FARREL Laboratory Two Roll Mill
Farrel Laboratory Mill Hand operated nips 20HP, 15kW Motor 1440rpm Friction 1:1 to 2:1 Rotary joint for steam heating water cooling Trays fitted beneath Mill rolls
 
ON  
offer is possible  
  UK   71949367
06.02.2017 Rubber testing devices MONSANTO RHEOMETER 100S
Rubber testing devices MONSANTO RHEOMETER 100S
Device in very good condition, last calibration date: 2016.
 
4,000 €  
  PL   71532697
21.12.2016  MONSANTO Rheometer 200E ODR
MONSANTO Rheometer 200E ODR
Rheometer Manufacturer: Monsanto Type: ODR 2000E Rheometer; 230 V, 1 kVA, Pneumatic actuated min. 4.8 bar, max. 8 bar Dell PC configuration and metal cabinet dim. 160 x 90 x 235 cm Currently in calibration
 
 
offer is possible  
  UK   71514410
16.02.2017 Interior blenders BUZULUK 90 liters
Interior blenders BUZULUK 90 liters
Absolutely unused Buzuluk internal mixer 90l with motor 315kW. Year of production: 1988
 
 
offer is possible  
  PL   71478353
15.12.2016 Rolling mills ZUT ZGODA 550 x 1500mm
Rolling mills ZUT ZGODA 550 x 1500mm
Roll mill for rubber WG 550 x 1500mm sleep ring motor, power: 70 kW with automatic soft start roll gap adjustment motorized hollow chamber type rolls with rotary joints single base plate This roll mill is of solid and reliable construction, made in Poland. Machine weight is approx. 23 tons. Good technical condition - machine on workplace.
 
12,900 €
offer is possible  
  PL   71290524
01.02.2017 Calenders BERSTORFF 1200 x 510mm
Calenders BERSTORFF 1200 x 510mm
3 rolls calender for rubber. Machine dismounted, without electromotor. Good technical condition.
 
4,400 €  
  PL   71290513
15.12.2016  ITALPRESSES ITALPRESSES 400 TON
ITALPRESSES ITALPRESSES 400 TON
Italpresse 400 ton hydraulic press Platens: Electric heated 1600 mm x 600 mm Temperature: 150°C Daylight: 600 mm Stroke: 600 mm Front and rear guards Siemens Control Well maintained and looked after press
 
 
offer is possible  
  UK   71273524
21.12.2016 Rolling mills THIERAU 1800mm x 550m diam. Two Roll M
Rolling mills THIERAU 1800mm x 550m diam. Two Roll M
72” (1800mm) x 22” (550mm) diam. Two Roll Mill Manufacturer: Thierau With Agila 72” Stock Blender Cored rolls Roll speeds: 18.57mmin 21.80mmin Left hand inline drive Hand operated nip With knives Diam. roll 550 mm, W 1.800 mm Filton Rotary joints for steam heating cooling Powered by AC HIGHWAY 132 kW electric v.v. cutter with 5 rotating blades Complete with Starter Control Panel Fully reconditioned by Agila 1991 Mounted on bed plate GA drawing available
 
ON  
offer is possible  
  UK   71013888
21.12.2016 Rolling mills THIERAU 2100mm x 650mm diam. Two Roll
Rolling mills THIERAU 2100mm x 650mm diam. Two Roll
84” (2100mm) x 26” (650mm) diam. Two Roll Mill Manufacturer: Thierau With Agila 84” Stock Blender Cored rolls Roll speeds: 21.03mmin 27.34mmin Front roll smooth, back roll half grooved Left hand inline drive Diam. roll 650 mm, W 2100 mm, Filton Rotary joints for steam heating cooling Powered by AC Brooks electric 160 kW electric Complete with Starter Control Panel Fully reconditioned by Agila 1991 Mounted on bed plate GA drawing available
 
ON  
offer is possible  
  UK   71013887
07.12.2016 Rubber testing devices METALCHEM RHEOMETER WG 02
Rubber testing devices METALCHEM RHEOMETER WG 02
Rheometer used, in very good condition.
 
4,900 €
offer is possible  
  PL   70983797
06.12.2016 Press  HBR 1300x3200mm
Press HBR 1300x3200mm
Press 1300 x 3200 mm, clamping force approx. 4200 kN, steam heated
 
   
  CZ   70939936
06.12.2016  MACKEY BOWLEY 200 ton
MACKEY BOWLEY 200 ton
Mackey Bowley 200 TONNE DOWNSTROKE 4 COLUMN PRESS COMPLETE WITH 35 TONNE EJECTOR PRESS SPECIFICATION: Press Floor area 2100 mm L-R x 1500 mm B-F (inc guards etc) Press Height 4800 mm (over pipe work) Press Mass 16,000 kgs Press bed working height 1050 mm approx. (installed in pit 1000 mm deep) Maximum Main Ram Press Load 200 Tonnes Minimum Main Ram press Load 20 Tonnes Maximum Hydraulic Pressure 164 bar (200T) Main Ram Stroke 750 mm Main Bed – Bed Daylight 75 ...
2008
 
offer is possible  
  UK   70924915
21.12.2016  
Mixer Banbury Werner & Pfleiderer GK160 Mixing Line
W&P GK160 Mixing Line Mixer type: GK160 Werner & PfleidererHF Floating weight Pneumatic driven, water cooled Approximate weight per batch Approx 220kgs Rotor Tangential ZZ2. Drop door Swing Type With Gearbox, Motor TWIN MILL Mill size 84” ( 2100 x 660 mm) Stockblender (rolls) Nr.1 Buzuluck type Nr.2 VMI design Roller conveyor (2x) Length: 11500 mm SLAB FEEDER: Cutter Overall length: 3000 mm CHARGER WEIGHING SYSTEM: Belt conveyor on 4 load cells Length: 6120 mm DUMP CONVEYOR: Belt conveyor Length: 6120 mm
 
ON  
offer is possible  
  UK   70507138
21.12.2016 Calenders FARREL BRIDGE Four Roll Inclined Z Calender
Calenders FARREL BRIDGE Four Roll Inclined Z Calender
FARREL BRIDGE 4-ROLL, INCLINED 'Z' CALENDER. 66 inch roll face width, 28 inch diameter. Rolls are current polished to produce matt PVC finish. Independent variable speed DC drive to each roll via solid state, AC to DC converter. Cross axis control on roll 4 (roll 3 fixed). Extensively modified and up-graded controls and drives.
 
ON  
offer is possible  
  UK   70507026
22.02.2017 Rubber extruders TROESTER 120 x 16D
Rubber extruders TROESTER 120 x 16D
Cold feed pin Type extruder 120 mm YOM: 1986 LD ratio: 16 d Pins: 60, 6 x 10 Feed roller: available, driven by screw Head: for die Motor: DC, Kaiser GV225. 4 M, 0,9-90kW, 15-1500 rpm TCU: Tool-temp Switzerland, 4 zones Electricity: available Control Panel: available Accessories: Feeders with metal detector Chiller 37kW
 
 
offer is possible  
  DE   70329808
21.12.2016 Calenders  2000mm Two Roll Calender
Calenders 2000mm Two Roll Calender
Two Roll Calender 2000mmm wideThe calendar is equipped with:Its own steam generatorA frequency controlled motor allowing to alter the speed from very slow to max speed.Teflon coated guide rolls and a transport belt and winding station which are synchronized to the calendarElectrically driven nip adjustment
 
ON  
offer is possible  
  UK   69883653
21.11.2016 Mixer AMK Z Blade Mixer
Mixer AMK Z Blade Mixer
300 litre Z Blade Mixer Manufacturer: AMK Internal dims: 30” x 30” x 30” Fitted with a Brook Crompton Motor, 15 kw motor to drive the blades and an 11 kw motor for screw drive with stardelta starters for both motor The screw drive operates through a PIV gearbox. The mixer contact parts are manufactured from Stainless Steel Fitted with an 11 hole strand die. The pipe matrix is for connection to an oil heater, the jacket was designed for steam heating. PIV gearbox WKRS82
 
ON  
offer is possible  
  UK   69883650
21.11.2016 Mill FARREL BRIDGE Rubber Mill
Mill FARREL BRIDGE Rubber Mill
84” (2100mm) wide x 26” (650mm) diam. Two Roll Mill Manuf: Farrel Bridge Hagglunds hydraulic motor and drive With Temperature Control Unit (TCU); Front roll smooth, back roll smooth Peripherally drilled rolls Electric heating Variable speed and friction ratio. Speed 0 to 35 rpm Cold water supply With control panel Mill was supplied and installed with the Hydraulic system new in 1998 With Manual (inc drawings) for both the Mill and hydraulics (hard copy not electronic)
 
ON  
offer is possible  
  UK   68768206
21.11.2016 Rolling mills  24inch x 12inch Two Roll Mill
Rolling mills 24inch x 12inch Two Roll Mill
Two Roll Mill Roll dimensions 24” wide x 12” diameter 30 HP Motor Right angle drive Tray fitted beneath Mill rolls Rotary joints for steam heating water cooling The friction ratio is 1.1:1 Complete with Control Panel
 
ON  
offer is possible  
  UK   68678765
10.11.2016  VERTICAL Autoclaves
VERTICAL Autoclaves
12 x Vertical Autoclaves (4 x 3 sets Autoclaves). Each set has a hydraulic power pack that services 3 autoclaves and a extractor (which dies out the matrix from autoclaves).The volume is 1600 liters;Maximum operating pressure - 22 bar;Method of working - water vapor - fluid;They were part of a line of vulcanized POLI-V belts for the automotive industry. For each autoclave there are certifications
 
ON  
offer is possible  
  UK   68676893
21.11.2016 Hydraulic Moulding Press THOMPSON Upstroking Press
Hydraulic Moulding Press THOMPSON Upstroking Press
Upstroking Presses (x4) Manufacturer: Thompson Tonnage: 100tons Electrically heated platens Platen size 20” sq 14” daylight 12” diam Ram With load tables With pump units The Presses are fully operational
 
ON  
offer is possible  
  UK   68663026
21.11.2016 Hydraulic Moulding Press DANIELS Upstroking Press
Hydraulic Moulding Press DANIELS Upstroking Press
3x Upstroking Presses Manufacturer: Daniels Tonnage 175 tons Electrically heated platens 25” daylight 24” sq platens 16” diam. Ram Push back rams Light curtains Fully compliant with European standard regulations Electrical cabinets Full guarding Omron light guard Load table Full electrical drawings circuit drawings Individual pump units Fully operational
 
ON  
offer is possible  
  UK   68663025
21.11.2016 Rolling mills FARREL BRIDGE Two Roll Mill 12inch x 6inch
Rolling mills FARREL BRIDGE Two Roll Mill 12inch x 6inch
Farrel Bridge 12” x 6” Two Roll Mill Hand operated nips Even & friction Tray fitted beneath Mill rolls Complete with motor and starter
 
ON  
offer is possible  
  UK   68663024
24.10.2016 Rolling mills VEB 200 x 410mm
Rolling mills VEB 200 x 410mm
Lab 2 roll mill for rubber. Working condition.
 
4,800 €
offer is possible  
  PL   68210732

3. machines for plastic:

301 injection moulding machines
302 extruders
303 blow moulding machines
304 thermoforming machines
305 peripheral equipment (e.g. heating,cooling,drying)
306 moulds
307 rubber machines
308 other machines for plastic
309 mills
310 spare parts for plastic machinery
 
all dynamic subcategories of the category machines for plastic (2 or more items)
(Plastic) Injection Moulders (3)
additional equipment (2)
Agglomerator (3)
Angle conveyor belts (5)
Assembly Plate for Injection Molding Machine (4)
Autoclave (3)
Bagmachine (3)
Banbury Internal Mixer (5)
barrel (5)
Blow molding machine (2)
blow mould (2)
BLOW MOULDING MACHINE (3)
Blow moulding machines (17)
Blowing machines (5)
Blown film lines (5)
Calender lines (4)
Calenders (7)
calibration table (2)
Clamping Plate for Injection Molding Machine (5)
Clamping Plate for Injection Moulding Machine (10)
Coating and printing plants (5)
Coextrusion plants (4)
Cold water sets (2)
Colouring equipment for granulate (2)
Compounding line (9)
Connection Plate for Injection Molding Machine (2)
Continuous Mixer (2)
Conveying belts (3)
Coolant pump (6)
COOLING DE. (3)
Cooling spry bath UNICOR (2)
Cooling system (2)
Corner cleaning machine Eckputzmaschine (2)
Cutting mill (3)
Cutting mills (21)
Cylinders (2)
DOLCI EXTRUDER 35 MM. FOR HDPE LDPE 800 MM WINDER (2)
Dosing devices (4)
double screw extruder (2)
Double screw-type extruding machine (17)
drying hopper (2)
Drying Oven (2)
Dump Extruder (2)
Eckputzmaschine Corner (4)
ELBA BAG MAKING MACHINE (4)
Electrical Parts for Injection Moulding Machines (2)
Embossing Calender (2)
Embossing machines (4)
EPS Blockmould (2)
Extruder (7)
Extruder Line (3)
Extruders (20)
Extruding lines (7)
Extrusion blow molding machines (5)
FILM EXTRUSION LINES BLOWN FILM (3)
film lines (3)
Fine grinding mills (4)
Flat foil extrusion installations (2)
Granulat converyor equipment (14)
GRANULAT DRYER (2)
Granulate conveying devices (3)
Granulate dryers (2)
Granulate drying unit (27)
Granulate pigment mixing unit (4)
granulating lines (3)
Granulating plants (12)
Granulator (31)
Granules loader (4)
GUILLOTINE – SHEARS PUGGELLI (2)
Haul Off (4)
Haul-Off for profiles (2)
horizontal conveyor (5)
horizontal to incline conveyor (5)
Hydraulic Moulding Press (5)
Hydraulic Press (2)
IMM for food and beverages caps (2)
IMM.ARBURG (3)
IMM.KRAUSS MAFFEI (2)
INJ.MOLDING M. (2)
Injection Blow Moulding Machine (2)
Injection molding machine (13)
Injection molding machine - vertical (4)
Injection Molding Machine for PET Preforms (2)
Injection molding machine over 5000 KN (6)
Injection molding machine up to 1000 KN (20)
Injection molding machine up to 5000 KN (15)
Injection molding machines (273)
Injection molding machines for rubber (3)
Injection Molding Machines Guiding Element (2)
Injection moulding devices (2)
Injection Moulding Machine (49)
Injection Moulding Machine for Plastic Materials (6)
Injection Moulding Machines (5)
Injection Moulding Machines Guiding Element (2)
Injection moulding tools (2)
Injection moulds (8)
Interior blenders (4)
Internal Mixer (7)
IPS Strand drying SA 150 (2)
Laboratory Mill (2)
Laboratory rolling mills (2)
Large Tonnage Injection Moulding Machines (2)
Linear robots (10)
Machine-side mills (2)
Machines used for injection moulding (2)
Mill (5)
Mixer (4)
MIXING SILO 5000 lt grey (3)
Moog valve (2)
mould (2)
Multi color injection molding machine (2)
Multi component injection moulding machines (2)
Other equipment (3)
parts-removal robot (5)
pelletizer (8)
PET Preforming machines (16)
PET small dryer line (2)
PET Stretching blowing machines (24)
pipes - and profiles (2)
Planetary Mixer (2)
Plastic injection machines (48)
Plastic welding machine (3)
Preform Injection machine (2)
Press (7)
Profile extrusion lines (3)
Profile extrusion lines and extrusion plants (2)
Prop Valve, Husky (2)
Pulveriser (2)
Pulverizer (4)
Pulverizers (2)
Refrigerating machines (2)
Refrigeration machine (10)
Repelletising plants (2)
ROBOT (2)
Robots (2)
Role cutters (3)
Roll stamps (2)
Rolling mills (20)
Rotary compression machine (3)
Rubber Extruder (3)
Rubber extruders (9)
Rubber injection molding machine (2)
Rubber Injection Moulding Machine (2)
Rubber injection presses (4)
Rubber Pin Barrel Extruder (2)
Rubber processing machines (4)
Rubber testing devices (7)
screw (2)
screw and barrel (3)
Sheet Forming Machines (2)
Shredder facilities (3)
Single screw extruder (5)
Single screw-type extruding machine (7)
Single station machines (2)
Single-Screw Extruder (4)
Spare parts (8)
Spare Parts for Injection Molding Machine (4)
Special injection moulding machines (4)
spray cooling tanks for pipes (4)
srew (6)
srew and barrel complete (27)
storage containers (2)
TECOM EXTRUDER 40 MM . - 700 MM WIDE FILM (2)
TEMP. CONTR U (6)
TEMP. CONTR UNIT (2)
Temperature control unit (7)
Temperature control units (7)
Thermo forming machines (14)
Thermoforming Machine (5)
tilting table for profiles (2)
twin screw extruder (8)
Twin-Screw extruder (4)
Two Roll Mill (5)
Two-Component Injection Moulding Machine (2)
Type: 0,5ltr. blow mould (3)
Type: 1775x2-12mm sheet die (2)
Type: 200mm PVC profile line (3)
Type: 2200x2-12mm sheet die (2)
Type: 240mm PVC profile line (3)
Type: 2ltr. blow mould (2)
Type: airdryer (4)
Type: blow moulding machine (5)
Type: chiller (3)
Type: compounding extruder (3)
Type: compounding line (11)
Type: compressor (2)
Type: compressor 40 bar (2)
Type: conical twin screw extruder (2)
Type: dryer (7)
Type: drying funnel (9)
Type: granulator (2)
Type: grinder (2)
Type: hot face cutter (3)
Type: injection moulding machine (16)
Type: melting pump (4)
Type: pelletizer (2)
Type: pelletizing line (5)
Type: PET injection moulding machine (3)
Type: PET machine (2)
Type: PET mould for Tetra Pak DBX 6/LX 6 6 cavitie (4)
Type: PET stretch blow moulder (9)
Type: PET stretch blow moulding machine (4)
Type: PET-dryer (6)
Type: PET-stretch blow moulding machine (6)
Type: profile line downstream (2)
Type: PVC pelletizing line (3)
Type: PVC twin screw extruder (3)
Type: sheet grinder (2)
Type: single screw extruder (14)
Type: twin screw extruder (7)
Type: twinscrew extruder (2)
Type: water cooling unit (4)
Unlubricated air dryer (20)
UTECO GOLD 612 RR (3)
vacuum calibration tank for pipes (4)
Vacuum-forming machines (4)
valve (2)
Vertical mixer (2)
Water slot machine (2)
Window seal cutter (2)
Zweikopfschweissmaschine (2)
Start