english language
Resale Logo

Category 302: extruders

back back

451 used extruders page 2

used machinery sale offers sorted by date

Go to the full result list of the category:
with sub-categories, search word input, manufacturer search and more machines
Date Photo Machine Year Price Country No.
< page 2 >
15.12.2016  
Double screw-type extruding machine AMUT Twin screw 120 mm d
AMUT 120 mm dia. twin screw extruder plant for PVC sheets 180 - 1000 micron thickness. Sheet width max. approx. 680 mm, T-die 720 mm width. 3 roller polishing unit 820 mm working width, roll diameter 450 mm. Haul off and double winder. Plant control : SIEMENS SIEMATIC.
2004
99,000 €  
  EU   71290646
10.12.2016  MAGME GA25DE-25D
MAGME GA25DE-25D
Used 25 mm extruder with 4 kW AC-motor with new installed control cabinet on the machine frame one 1-hole die is mounted maximum screw speed 130 rpm Optionally we can add one water bath and one small strand pelletizer
1993
 
offer is possible  
  DE   71084362
01.12.2016  
Granulating plants EREMA RGA 100
Renovated EREMA RGA 100, extrusion recycling plant for the processing of polyethylene, without granulation. Granulation can grown. Performance approx. 350 kg h electric 50 Hz, otherwise completely equipped, Auch Folien + Technik e. kfm. D-73773 Aichwald Tel. 0049 711 364341, fax 0049 711 363703
1995
 
offer is possible  
  DE   70820345
12.01.2017  
NGR NGR S-Gran
Renovated extrusion recycling plant NGR type S-Gran, processing polyethylene 400 kg h or polypropylene 350 kg h, electric 50 Hz, dlouble degassing, fully equipped, Auch Folien + Technik e. Kfm. D-73773 Aichwald phone 0049 711 364341, fax 0049 711 363703
2013
 
offer is possible  
  DE   70507164
24.11.2016  
Granulating plants NGR NGR C-Gran
Renovated extrusion recycling plant NGR type C-Gran, processing of polyethylene 400 kg h or polypropylene 350 kg h, electric 50 Hz, Auch Folien + Technik e. Kfm. D-73773 Aichwald Tel. 0049 711 364341, fax 0049 711 363703
2014
 
offer is possible  
  DE   70507162
24.11.2016  
Extruders W & H Varex 60
Extruder make windmoeller & Hoelscher, used, screw 60 mm ld 30, type Varex 60, with smooth granulate catchment zone, without control cabinet, well preserved. Auch Folien + Technik e. kfm. D-73773 Aichwald Tel. 0049 (711) 364341, fax 0049 (711) 363703
1998
 
offer is possible  
  DE   70507152
24.03.2017  
Extruders REIFENHäUSER RT 1651-1-100-30
Extruder make Reifenhaeuser, type RT 1651-1-100-30, extruder screw of 100 mm LD 30, material Reiloy bimetallic, with hydraulic screen-changer. Performance for LD-PE on a blown film plant: 300-350 kg h. Power: Drive of the extruder 180 kW, total connected load with heaters about 250 kW. Auch Folien + Technik e. Kfm. D-73773 Aichwald, phone 0049-711-364341, fax 0049-711-363703. E-Mail: Auchfolien@t-online
1999
 
offer is possible  
  DE   70507149
03.01.2017 Extrusion Plant BATTENFELD
Extrusion Plant BATTENFELD
The plant consists of the following components: (1) Extruder Battenfeld EX-2-90-16V, built 1986, output: 150kgh. (2) Calibrating table Battenfeld K400 V 4, built 1983. (3) Caterpillar take-off Battenfeld P 250 SX-L, Baujahr: 1987, Leistung: 3.8mmin.
 
ON    
  DE   70330061
22.11.2016  
twin screw extruder AA WP zsk 120 Custom
We can offer Custom built 120mm WP extruder complete with brand new Control panel Ac drive panel Ac main drive motor Based around items from our stock no 25486673 350 kw Twin screw Gearbox 120mm shafts elements 120mm barrel section Please contact us regarding your requirment
 
 
offer is possible  
  UK   70106703
16.11.2016 Flat foil extruders KUHNE 90-30D
Flat foil extruders KUHNE 90-30D
Extrusion line for PSPP &amp;amp; PETG thermoforming film Motan dryer Main extruder screw diameter of 90 mm and 30 LD Co-extruder diameter 45 mm 3 roller calender diameter of 510 mm and 900 mm width Nozzle width 840 mm Cooling section Shoulder blades and rollers 2 rubber rollers decrease Mahachon double rewinder with Hydraulig aggregate Output approx. 300 kg h PS with 90% regrind
1993
 
offer is possible  
  DE   68757960
13.11.2016  
Extruders JAPAN CD compact disc
CD(compact disc) PRODUCTION LINE EQUIPMWNT LIST 1.SD40ER forming machine X 2SET Make:Sumitomo(Japan),Model:MOWE5118 2.SD35E forming machine X 1SET Make:Sumitomo(Japan),Model:MOWE0003 3.DISC forming machine X 1SET Make:Sumitomo(Japan),Model:DISC 30 4.MOLD x12EA Make:Trans(Japan) 5.MOLD TEMPERATURE CONTROL EQUIPMENT x4 EA Make:Kubota(Japan),Model:STP-3H 6. .MOLD TEMPERATURE CONTROL EQUIPMENT x5 EA Make:Sisco(Japan),Model:TDM445 7.MOLD TEMPERATURE CONTROL EQUIPMENT x5 EA Make:Matsui(Japan) ...
 
 
offer is possible  
  KR   68721810
12.11.2016  
Granulating plants ALPHA TEC A-FG 100 TE
Similar new extrusion recycling plant type AlphaTec A FG 100 TE, built in 2014 for the processing of polyethylene, with degassing. Capacity 350 kg h, in running condition. Auch Folien + Technik e. kfm. D-73773 Aichwald tel. 0049 711 364341, fax 0049 711 363703
2014
 
offer is possible  
  DE   68710572
11.11.2016 Extruding lines BATTENFELD / CINCINNATI Extruder BC-2-921-28
Extruding lines BATTENFELD / CINCINNATI Extruder BC-2-921-28
Technical data extruder: AC-motor: 110 kW Screw diameter: 92 mm Total capacity: 143 kW Emissions: 500 kg h voltage: 264 k VA Rated voltage: 400 V year: 2014 Technical data vertical feeder snails ø: 90 mm Volume per presettings: 0.32 dm ³ Drive AC motor: 3.9 kW Hopper capacity: approx. 100 dm ³ Mixing silo technical data: Silo content: 9.5 cbm Diameter: 2.4 m Total height: 4.2 m Drive mixing screw: 11 KW 64 rpm Drive pipe pressing worm: 2 KW 64 rpm Conveying system for granule: 15 m horiz ...
2014
 
offer is possible  
  DE   68690286
09.03.2017 Haul-Off for Profiles SICA C-250-4
Haul-Off for Profiles SICA C-250-4
Haul-Off, used Manufacturer: SICA Type: C-250-4 Year of construction: 1997 Pipe diameter: 40-250 mm Number of caterpillars: 4 Caterpillar contact length: 1300 mm Haul-off speed: 15 m min. Motor power: approx. 5.5 kW (GL-motor) Haul-Off force: max. 12 KN Dimensions: 3500 x 1600 x 2400 mm (L x W x H) Weight: 1800 kg State: checked and ready for operation
1997
11,900 €
offer is possible  
  DE   68678813
13.11.2016 Extruding lines JAPAN POLYURETHANE TPU
Extruding lines JAPAN POLYURETHANE TPU
1.TPU(POLYURETHANE) REACTION FORMING EQUIPMENT Make:Japan Plastics(Japan) Year:2010 PU Pelletizing &Rheometer Capa:700kgh 1)Twin screw extruder Dia. 92mm , LD=452.5 1feed 1 vent 200kw inverter motor Water cooling type 2.TPU(POLYURETHANE) REACTION FORMING EQUIPMENT Make:BKG(Germany) Year:2010 Under water Pelletizing system Adapter:AV35(FOR EXTRUDER) 3. TPU(POLYURETHANE) REACTION FORMING EQUIPMENT Make:Tosoltec(Korea) Year:2010 Reaction extrusion capa.:700kgh Drying temp: 70-90degr ...
2010
 
offer is possible  
  KR   68550084
13.11.2016 Extruding lines KOREA Polypropylene recycling
Extruding lines KOREA Polypropylene recycling
PP(Polypropylene) fiber recycling plant 1. Recycle PPFiber MC Make :Youngkwang(Korea) Year:2004 Cap':2tonhour Rotary & gate valve:0.75kw Rotate speed:3-11mmin Advanced crystallization & heating instrument:100kw Advanced crystallization blower:75kw Filling style drying tower:?13507500mm Volume:8.6? Drying heater:50kw 2)Mixer drum Cap':2tonhour Size:36002450mm Screw conveyor(?2303200mm):3ea Magnetic conveyor(5004000mm):1ea Motor:8.8kw 3)Screw extruder Screw dia':?170 ...
2004
 
offer is possible  
  KR   68550064
13.11.2016 Extruders KOREA PP RECYCLE
Extruders KOREA PP RECYCLE
PP(Polypropylene) fiber recycling plant 1. Recycle PPFiber MC Make :Youngkwang(Korea) Year:2004 Cap':2tonhour Rotary & gate valve:0.75kw Rotate speed:3-11mmin Advanced crystallization & heating instrument:100kw Advanced crystallization blower:75kw Filling style drying tower:?13507500mm Volume:8.6? Drying heater:50kw 2)Mixer drum Cap':2tonhour Size:36002450mm Screw conveyor(?2303200mm):3ea Magnetic conveyor(5004000mm):1ea Motor:8.8kw 3)Screw extruder Screw dia':?170 ...
2004
 
offer is possible  
  KR   68550063
29.10.2016  
Granulating plants EREMA RGA 60
Extrusion recycling equipment EREMA RGA 60 to the process of polyethylene. Capacity now 110 kgHR operational performance. Last refurbished in 2013. The machine is equipped WITHOUT degassing. The degassing to the can be installed, requires the replacement of the cylinder and the screw of the Extruder for capacity of 160 kgh. Auch Folien + Technik e. Kfm. D-73773 Aichwald Tel. 0049 711 364341, fax 0049 711 363703
1987
 
offer is possible  
  DE   68281633
24.11.2016 Flat foil extrusion installations WindmoellerHoelscher FILMEX cast line
Flat foil extrusion installations Windmoeller&Hoelscher
CAST FILM EXTRUDER FOR PRODUCTION OF BARRIER LAYER IN THE FIELD OF FOOD PACKAGING 1 – WINDMOELLER & HOELSCHER FILMEX Cast Line - 9 Layers Year 2011 Film Nominal slot width 2.700 mm Film Effective net width 2.400 mm Film thickness range 20 - 250 mikron Film output speed (mechanical) max 350 metersmin Film output gross material max 1.000 KGh Electrical device: 400 Volt 50 Hz Up to 1.350 kVA
2011
 
offer is possible  
    68210587
18.11.2016  
Coextrusion plants REIFFENHAUSER cast coex3 film extrusion
Reiffenhauser used cast coex3 film extrusion line in operation full offer on request Please let us know if you are looking for other machines or if you have your machinery for sale
 
 
offer is possible  
    68078767
19.10.2016 Extrusion line for safety and packaging nets SZVOGEP Sz-45H
Extrusion line for safety and packaging nets SZVOGEP Sz-45H
Machine from the manufacturer, used only under 100 working hours. For test run and net samples producing. Product: diamond shape plastic net, PE, PP, EVA etc. safety nets and stretched nets for vegatables and fruits packaging. Machine main details: - screw diameter 45 mm, LD 30, max. screw rpm.: 180min. - line speed up to 80 mmin - 1,5-2,5" net die head - water tank - stretching unit for fruit nets - two station winder, roll width 300mm - continuously adjustable: screw, dies, pulling, take up, winders - heater  ...
2015
   
  HU   67937006
09.03.2017 Battenfield Gloucester 1480mm Sheet Line GLOUCESTER ENGINEERING 3 Roll Vertical Calender
Battenfield Gloucester 1480mm Sheet Line GLOUCESTER ENGINEER
3 roll vertical calender - roller width 1480mm. Roll diameter - top 350mm - middle 350mm - bottom 400mm, multi chain drive. Heat exchange system - Take off width1500mm independent drive. Wind up - 3 position turret winder with pnuematic coe grippers, adjustable wind up speed width 1900mm. Dies (flex lip) Die 1- Extrusion Die Industries - width opening 1200mm. Die 2 EDS width opening 1280mm Edge trim granulater(with power feed) Main motor 5 kw - adjustable feed motor 1.5kw 2x Embossing rolls 48in x 12in. PRICE REDUCED TO CLE ...
 
32,000 aus
offer is possible  
  AU   67804800
17.03.2017 OMB BATTAGLIO  PELLETIZER BATTAGLIO 160 mm. 30 L/D
OMB BATTAGLIO PELLETIZER BATTAGLIO 160 mm. 30 L/D
Type E160-CE construction year 2001 screw diam 160 mm 30 LD vacuum degassing pump die face pelletizer plate type screen changer average output 750 kgh 282 kw motor installed power 440 kw vertical centrifuge vibro classifier electrical cabinet
2001
 
offer is possible  
  IT   67379550
17.03.2017 Double screw-type extruding machine ICMA S.GIORGIO 110 mm. 32 L/D
Double screw-type extruding machine ICMA S.GIORGIO 110 mm. 3
ICMA SAN GIORGIO TWIN SCREW EXTRUDER screws diam. 110 32 LD 130 kw motor loading silo 3 + 3 dosing units year 19971999 GAMMA MECCANICA pelletizer year2002 drying centrifuge and piping Vibro classifier L75 Lorandi blowing unit vacuum steam extraction dust separator with vent and shaking unit electrical panel loading auger on movable support. # 1 NOVA Chiller FRIDGE R65 # 1 NOVA Chiller FRIDGE R105 # 1 INDUSTRIAL FRIGO BAL 4GN year 1999 # 1 metal supporting frame Average output 6001000 kg. Depending on material
2000
 
offer is possible  
  IT   67146673
04.10.2016  BATTENFELD 1-60-30B
BATTENFELD 1-60-30B
According to the description below
1990
 
offer is possible  
  DE   66814971
04.10.2016  CINCINNATI Argos 132
CINCINNATI Argos 132
Snails + cylinder according to description
2010
 
offer is possible  
  DE   66814961
26.09.2016 Flat foil extrusion installations REIFENHäUSER 30D EH 1200
Flat foil extrusion installations REIFENHäUSER 30D EH 1200
PS PP flat film co extrusion line Capacity: 900 kg PS hour and 700 kg PP hour Coating distribution: ABC Film thickness: 600-1,200 microns Width with up to 1,400 mm (gross) A: serial Reifenhauser extruder: 09.894 Year: 1979 Main extruder 30 d EH 1200-1-120-30V Screw size: 120 mm L D: 30 Maag melt pump and Kreyenborg db. Piston screen changer Barrel replaced about 78 years 2 x Welex co-Exrtrusion, Reifenhauser calender, Maier winder.
1979
 
offer is possible  
  DE   66814873
09.03.2017 Sheet Calender Line BREYER
Sheet Calender Line BREYER
3 Bowl Calender,2metre wide 1 off sheet dies:EDS 1400mm 1 off sheet die: Extrusion die ind 1600mm (no side plate) 3 position Breyer water temperature controllers Vetaphone treater Breyer motorised hauloff with slitter station Battenedfeld Glouster motorised rewinder: 4 cluck Expanders Used before on P.V.C film. run before by Cincinatti Milacron 80 twin Screw(not available PRICE REDUCED TO CLEAR - EX WORKS
1990
29,000 aus  
  AU   66420209
05.09.2016  
Coextrusion plants BARMAG BF 12 - 5/5 - 1400 AK
Blown film plant used make BARMAG for extrusion of PEbonding agent EVOH or PA bonding agent PE, fully extensively equipped with automatically working film winders 1,400 mm working width, capacity up to 220 kg h, EXEMPLARY superbly maintained and permanently the parts replaced, to leave immediately. Auch Folien + Technik e. Kfm. D-73773 Aichwald Tel. 0049 (711) 364341, fax 0049 (711) 363703
1992
 
offer is possible  
  DE   61698128
09.03.2017 Haul-Off for profiles WEBER AP-2
Haul-Off for profiles WEBER AP-2
Haul-off for profiles, used and tested for function Manufacturer: WEBER Type: AP 2 Year of manufacture: 1994 Segment width: 200 mm Profile height: max. 160 mm Gripping length: 1200 mm Haul-off speed: 0.12 – 12 mmin. Motor power: ap. 1,5 kW (AC-Motor) Haul-off force: max. 8 kN Dimension: 2500 x 600 x 2000 mm (L x B x H) Weight: ap. 2000 kg
1994
4,900 €
offer is possible  
  DE   61698087

3. machines for plastic:

301 injection moulding machines
302 extruders
303 blow moulding machines
304 thermoforming machines
305 peripheral equipment (e.g. heating,cooling,drying)
306 moulds
307 rubber machines
308 other machines for plastic
309 mills
310 spare parts for plastic machinery
 
all dynamic subcategories of the category machines for plastic (2 or more items)
(Plastic) Injection Moulders (3)
additional equipment (2)
Agglomerator (3)
All electric injection moulding machine (2)
Angle conveyor belts (5)
Autoclave (3)
Bagmachine (3)
Banbury Internal Mixer (5)
barrel (5)
Blow molding machine (2)
blow mould (2)
BLOW MOULDING MACHINE (3)
Blow moulding machines (20)
Blowing machines (5)
Blown film lines (9)
Bottom seal bag making machine (2)
Calender lines (3)
Calenders (7)
calibration table (2)
Closed mold (3)
Coating and printing plants (3)
Coextrusion plants (5)
Cold water sets (2)
Colouring equipment for granulate (2)
Compounding line (9)
Continuous Mixer (2)
Conveying belts (3)
Coolant pump (4)
COOLING DE. (3)
Cooling spry bath UNICOR (2)
Cooling system (2)
Corner cleaning machine Eckputzmaschine (2)
Cup Printer (2)
Cutting mill (3)
Cutting mills (22)
Cylinders (2)
DOLCI EXTRUDER 35 MM. FOR HDPE LDPE 800 MM WINDER (2)
Dosing devices (4)
double screw extruder (2)
Double screw-type extruding machine (10)
drying hopper (2)
Drying Oven (2)
Dump Extruder (2)
Eckputzmaschine Corner (4)
ELBA BAG MAKING MACHINE (4)
Embossing Calender (2)
Embossing machines (4)
EPS Blockmould (2)
Extruder (6)
Extruder Line (3)
Extruders (17)
Extruding lines (7)
Extrusion blow molding machines (5)
FILM EXTRUSION LINES BLOWN FILM (3)
film lines (3)
Fine grinding mills (4)
Flat foil extrusion installations (2)
Granulat converyor equipment (7)
GRANULAT DRYER (2)
Granulate conveying devices (3)
Granulate dryers (2)
Granulate drying unit (24)
Granulate pigment mixing unit (3)
granulating lines (3)
Granulating plants (9)
Granulator (36)
Granules loader (4)
GUILLOTINE – SHEARS PUGGELLI (2)
Haul Off (4)
Haul-Off for profiles (2)
horizontal conveyor (5)
horizontal to incline conveyor (5)
Hot runner controllers (3)
Hydraulic Moulding Press (5)
Hydraulic Press (2)
IMM for food and beverages caps (2)
IMM.ARBURG (3)
IMM.KRAUSS MAFFEI (2)
INJ.MOLDING M. (2)
Injection Blow Molding Machine (2)
Injection Blow Moulding Machine (2)
Injection molding machine (14)
Injection molding machine - vertical (3)
Injection Molding Machine for PET Preforms (2)
Injection molding machine over 5000 KN (7)
Injection molding machine up to 1000 KN (22)
Injection molding machine up to 5000 KN (14)
Injection molding machines (284)
Injection molding machines for rubber (3)
Injection Moulding Machine (46)
Injection Moulding Machines (4)
Injection moulding tools (2)
Injection moulds (8)
Interior blenders (4)
Internal Mixer (7)
IPS Strand drying SA 150 (2)
Laboratory Mill (2)
Laboratory rolling mills (2)
Large Tonnage Injection Moulding Machines (2)
Linear robots (7)
Machine-side mills (2)
Machines used for injection moulding (5)
Mill (5)
Mixer (4)
MIXING SILO 5000 lt grey (3)
Moog valve (2)
mould (3)
Moulds for plant pots / Planters (3)
Multi component injection moulding machines (2)
Other equipment (3)
parts-removal robot (3)
pelletizer (8)
PET Preforming machines (16)
PET small dryer line (2)
PET Stretching blowing machines (24)
pipes - and profiles (2)
Planetary Mixer (2)
Plastic injection machines (53)
Plastic Injection Moulding Machine (2)
Plastic welding machine (3)
Preform Injection machine (2)
Press (7)
Profile extrusion lines (3)
Profile extrusion lines and extrusion plants (2)
Prop Valve, Husky (2)
Pulveriser (2)
Pulverizer (4)
Pulverizers (2)
Refrigerating machines (3)
Refrigeration machine (7)
Repelletising plants (2)
ROBOT (2)
Robots (3)
Role cutters (2)
Rolling mills (21)
Rotary compression machine (3)
Rubber Extruder (3)
Rubber extruders (9)
Rubber injection molding machine (2)
Rubber Injection Moulding Machine (2)
Rubber injection presses (4)
Rubber Pin Barrel Extruder (2)
Rubber processing machines (4)
Rubber testing devices (7)
screw (2)
screw and barrel (3)
Sheet Forming Machines (2)
Shredder (2)
Shredder facilities (2)
Single screw extruder (5)
Single screw-type extruding machine (6)
Single station machines (2)
Single-screw extruder (4)
Slitter-rewinder (2)
Spare parts (8)
Special injection moulding machines (4)
srew (6)
srew and barrel complete (27)
storage containers (2)
Strainer (Extruder) (2)
Stud Machine (3)
TECOM EXTRUDER 40 MM . - 700 MM WIDE FILM (2)
TEMP. CONTR U (6)
Temperature control unit (7)
Temperature control units (6)
TEMPERATURE CONTROLLER (2)
Thermo forming machines (17)
Thermoforming Machine (4)
tilting table for profiles (2)
twin screw extruder (8)
Twin-Screw extruder (3)
Two Roll Mill (5)
Two-Component Injection Moulding Machine (2)
Type: 0,5ltr. blow mould (3)
Type: 1775x2-12mm sheet die (2)
Type: 200mm PVC profile line (3)
Type: 2200x2-12mm sheet die (2)
Type: 240mm PVC profile line (3)
Type: 2ltr. blow mould (2)
Type: airdryer (4)
Type: blow moulding machine (5)
Type: chiller (3)
Type: compounding extruder (3)
Type: compounding line (11)
Type: compressor (2)
Type: compressor 40 bar (2)
Type: conical twin screw extruder (2)
Type: dryer (7)
Type: drying funnel (9)
Type: granulator (2)
Type: grinder (2)
Type: hot face cutter (3)
Type: injection moulding machine (16)
Type: melting pump (4)
Type: pelletizer (2)
Type: pelletizing line (5)
Type: PET injection moulding machine (3)
Type: PET machine (2)
Type: PET mould for Tetra Pak DBX 6/LX 6 6 cavitie (4)
Type: PET stretch blow moulder (9)
Type: PET stretch blow moulding machine (4)
Type: PET-dryer (6)
Type: PET-stretch blow moulding machine (6)
Type: profile line downstream (2)
Type: PVC pelletizing line (3)
Type: PVC twin screw extruder (3)
Type: sheet grinder (2)
Type: single screw extruder (14)
Type: twin screw extruder (7)
Type: twinscrew extruder (2)
Type: water cooling unit (4)
Unlubricated air dryer (20)
UTECO GOLD 612 RR (3)
Vacuum-forming machines (4)
valve (2)
WATER COOLING UNIT (2)
Water slot machine (2)
Window seal cutter (2)
Zweikopfschweissmaschine (2)
Start